SUBJECT & GRADE LEVEL TOPIC LEARNING COMPETENCY TLE QUARTER 1 WEEK 1 Pre-test LO1 LEARNING OBJECTIVES CODE Identify the level of proficiency of the student Answer the students correctly and honestly IMPORTANT Do not write anything on this material. Write your answers on your Intermediate Paper UNDERSTAND Topic: Pre-test Today you are going to take the pre-test. Answer the questions honestly without the help of anybody. Let us determine how much you already know about preparing electrical supplies, materials, and tools. REMEMBER Key Points TRY Directions: Read each statement carefully. Write only the letter of your choice on the space provided for: Choose your answer from the words inside the box Long Nose Pliers Circuit Breaker Hammer Electrician’s Knife Utility Box Portable Electric Drill Philips Screwdriver Connectors Wire Stripper Male Plug Fuse Combination Pliers Junction Box Shubby Screwdriver Conduits _____1. This is used for gripping, holding, and cutting electrical wires and cables and even small nails. It is usually used by linemen in doing heavy tasks. _____2. This is used for cutting and holding fine wires. It can reach tight space or small opening where other pliers cannot reach and also use in making terminal loops or copper wires. _____3. This has a cross tip resembling a positive (+) sign. This is used to drive screws with cross slot heads. _____4. This is a tool used in driving or pounding and pulling out nails. _____5. A tool used for removing insulation of medium sized wires ranging from gauge No. 10 to gauge No. 16 _____6. This is small drilling machine with a chuck capacity of ¼ ll to 3/8 ll. It is used in making holes on metal sheets and concrete walls. _____7. This comes in either Standard or Philips screw driver with short shank or blade and a shorted handle used to turn screws in tight space where standard screw driver cannot be used. _____8. This is used by linemen to remove insulation of wire and cables in low and high voltage transmission lines. _____9. This is a device inserted to a convenience outlet to conduct electric current. A flat cord is attached to it on one end and the other end is connected to a current consuming instrument or appliance. _____10. This is a circuit protective device that automatically blows and cut the current when and over load or short circuit happens.