Ningbo Beilun Highsun Machinery Co., Ltd. High Speed Injection Molding Machine (1)HXH 160 The computer control system uses bus communication such as CANbus EtherCAT to achieve full digital control. The temperature control uses a dedicated control module with an accuracy of 1 degree. It has a power monitoring function to monitor the energy consumption of current production. (2) HXH 520 Graphite steel sleeve is used at the elbow link and the guide rod, which is lubricated with thin oil and has better bearing capacity and wear resistance. Give the machine a longer life. The switch mode action is controlled by a proportional directional valve, which has the characteristics of rapid acceleration of motion, stable high-speed operation, and precise control of the position of the mold opening. (3) HXH 350 The hydraulic system adopts dual servo drive control, which has the advantages of high efficiency, energy saving and low noise, and can realize the functions of mold opening and material storage synchronization. Based on many years of experiments and research, Haixiong Thin Wall High Speed Machine series is specially designed for products with short molding cycle and high speed injection molding. Excellent performance in terms of motion characteristics, machine accuracy, and service life. Widely used in the production of packaging plastic products, medical plastic products, 3C electronic products. Contact Us ADD:No.36 Yongjiang South Road, Beilun District,Ningbo,315800, China TEL:0086-188 6861 6288/0086-136 8570 6288 WEB:www.highsun-machinery.com E-MAIL:haixiong@highsun-machinery.com