Grundfos SP Pump Minimum Flow Requirements Motor Diameter 4" 6" 8" 10" Casing or Sleeve I.D. in Inches 4 5 6 7 8 6 7 8 10 12 14 16 8 10 12 14 16 10 12 14 16 18 Minimum Flow Past the Motor (GPM) 1.2 7 13 21 30 10 28 45 85 140 198 275 10 55 110 180 255 30 85 145 220 305 NOTES: A) A flow inducer or sleeve must be used if the water enters the well above the motor or if there is insufficient water flow past the motor. B) The numbers above are based on a minimum water velocity of 0.25 feet per second over 4” motors, and 0.5 feet per second over 6”, 8”, and 10” motors. Revised 7/26/1999