Industrial Belt Design - Drive Detail Report
Design Flex® Pro by the Gates Corporation
Provided By: hudiono cahyono
Designed For:
PT.berkah Mekatek Jaya
hudiono.cahyono@gmail.com
03199094548 Phone
Application: Design #1
INPUT
Drive Information
Speed Ratio:
Input Load:
Service Factor:
Design Power:
Center Distance:
Motor Standards:
7.14 Down
40 hp, Efficiency: 92.00%
2.1
84 hp
1200 mm +/-10%
Electric Motor, 3-Phase
RPM:
DriveR
DriveN
1500.0
210.0 +/-4%
Bushings Checked: QD, MPB
Belts Checked: PowerGrip GT3, PowerGrip HTD
SELECTED DRIVE
Belt Type: PowerGrip GT3 - 14M
Speed Ratio:
dN RPM:
Rated Load:
ODR:
Belt Pull:
Center Distance:
Install/Take-Up Range:
Noise:
Savings:
Belt
DriveR
Part No:
4326-14MGT-55
Product No:
9356-0171
7.31 Down
Top Width:
-205.1
Weight:
2.3 kg
105.27 hp
Rim/Belt Speed:
11.2 m/s
1.25
RPM:
155.3
3318 N
1142.1 mm
Bushing Part No:
-1106.0 mm to 1143.4 mm
Bore:
-Bolt Torque
-79 dB @ 800 Hz
Pitch Diameter:
-The three year savings can be up to 12156 KWh
TENSION
Static Tension (per rib/strand):
Static Belt Pull (total pull):
Rib/Strand Deflection Distance:
Rib/Strand Deflection Force:
Sonic Tension Meter:
Belt Frequency:
New Belt
Used Belt
1669 to 1836 N
3114 to 3426 N
16.00 mm
12 to 13 kgf
1669 to 1836 N
27 to 28 Hz
1168 to 1335 N
2180 to 2491 N
16.00 mm
8.3 to 9.4 kgf
1168 to 1335 N
22 to 24 Hz
DriveN
F32-14MGT-55
F234-14MGT-55-F
7711-5532
7711-5523
73.59 mm
73.59 mm
3.2 kg
-11.0 m/s
11.2 m/s
1500.0
205.1
SK
F
12.7 mm - 66.7 mm 25.4 mm - 101.6 mm
20 N-m
149 N-m
142.6 mm
1042.8 mm
When planning to re-install used belts, measure
and record the tension before removing and
re-install at the recorded tension.
507C/508C Model STM Settings:
Mass 9.6g/m,Width: 55 mm/#R, Span: 1050 mm
NOTES
- Flanging both pulleys may be necessary for proper belt tracking.
- NEMA min dia recommendations do not exist for the HP/RPM selected. Consult with the Motor Manufacturer to confirm that the
belt pull is acceptable.
- Alignment is critical for long Center Distances.
- The driven pulley is Standard/Non-Stock and may require minimum quantities and extra lead time. Check with Customer
- Yearly
Service.Usage: 10 Hrs / Day, 5 Days / Wk, 50 Wks / Yr
This report: (1) only applies to Gates’ products; (2) contains confidential information; (3) may only be disclosed to support
the sale or maintenance of our products; and (4) is not a guarantee of performance.
Gates products are not designed, manufactured, or tested for use on aircraft applications, including aircraft propeller or
rotor drive systems, and all manned or unmanned airborne applications of any type. Lift and Braking systems have special
considerations. Buyer has sole responsibility for the selection and testing of products for any intended use.
This Report and any product referred to in this Report are subject to Gates Standard Terms and Conditions of Sale, including
all disclaimers, exclusions and limitations of warranties, express and implied. These Terms may be found at
ww2.gates.com/termsofsale.
06/06/2018 11:03 SE Asia Standard Time
Page 1 of 1 CONFIDENTIAL Gates Document
3.47/3.34/2.51/ North America English