575 Series
We reserve the right to revise the design or components of any product without notice.
CATALOG #
VANDAL RESISTANT FIXTURE
Corner Mount Standard, Wall Or Ceiling
Optional Tandem Mount
Fluorescent, LED
TYPE
PROJECT/LOCATION
APPROVED BY
SPECIFICATIONS
• BALLAST — EBU – Instant Start universal volt (120-277v) electronic.
Optional PRS – Programmable Rapid Start
• EMERGENCY — T5, T8 — Remote or Integral
• HOUSING — Heavy gauge extruded aluminum with cast aluminum end caps.
Includes knockouts for surface conduit and tandem mounting.
• CORNER BRACKET — 20 ga Die-Formed Aluminum with spot welded end caps.
End Caps include knock outs for surface conduit.
• REFLECTOR — 20G cold rolled steel die formed with multiple bends for maximum rigidity
and unitized with all electrical components.
• FINISH — All metal parts are 5 stage pre-treated and finished in white polyester powder coat.
Fixture is textured white, corner bracket is textured sky white.
• LENS — .156” thick Opal Polycarbonate. Internal linear prisms with smooth exterior.
Optional Clear Prismatic (CP)
• LENS FASTENERS — Stainless steel tamperproof screws to secure lens in place
(3) on each side—(6) total
• LAMPS — Bi-Pin Fluorescent – BY OTHERS
• COMPLIANCE — Built to comply with U.S. and Canadian safety standards.
Suitable For Wet Locations.
ARRA
Compliant
OPTIONS
29-1/8"
20-1/8"
5-1/8"
44-1/8"
49-1/4"
3/8" Dia. Hole
12-5/8"
24-5/8"
7/8" Dia. Knockout
36-5/8"
6-3/16"
4"
6-3/16"
9"
9245 W. Ivanhoe St. I Schiller Park, IL 60176
P: 847-260-0333 I F:847-260-0344 I E: quotes@eclipselightinginc.com I W: eclipselightinginc.com
© 2016 Eclipse Lighting Inc.
Eclipse Lighting pg.169 Rev. May 20, 2016
575 Series
VANDAL RESISTANT FIXTURE
Corner Mount Standard,
Wall Or Ceiling
Optional Tandem Mount
Fluorescent, LED
Series
Size
LAMP TYPE/QTY/WATTAGE ❶
Visit www.eclipselightinginc.com for available IES files
2 Foot 575
3 Foot 575
4 Foot 575
Fixture
Dimensions - W x H x D
T5 Bi-Pin Fluorescent
T5-High Output
Bi-Pin Fluorescent
T5
T8 Bi-Pin Fluorescent
T8
Light Emitting Diode
LED
Lamp Type/Qty/Watt
T5-HO
Color Temp
24” x 9” x 4”
37” x 9” x 4”
49” x 9” x 4”
(1 or 2)14/24w
(1 or 2)21w
(1 or 2)28w
8 Foot 575
96” x 9” x 4”
(Tandem)
(2 or 4)28w
24w
(1 or 2)39w
(1 or 2)54w
(2 or 4)54w
(1 or 2)17w
(1 or 2)25w
(1,2 or 3)32w
(2,4 or 6)32w
20/40w
40/50w
60w
120w
Voltage: Primary/Emergency
Finish
Options
ORDERING GUIDE:
SERIES
FINISH
575 = 575 Series
WH = White
SIZE
2’
3’
4’
8’
OPTIONS
= 2 Foot
= 3 Foot
= 4 Foot
= 8 Foot (2 x 4’ Tandem)
LAMP TYPE/QUANTITY/WATTAGE
Refer to Above Chart
VOLTAGE
120
277
347
EBU
2EB
LPF
= 120 Volts
= 277 Volts
= 347 Volts
= Universal Volt (120-277v) Electronic Ballast
= Two Electronic Ballasts
= Low Power Factor Ballast
COLOR TEMPERATURE
3K=±3000K Range LED (120 Initial LPW)
4K=±4000K Range LED (132 Initial LPW)
5K=±5000K Range LED (140 Initial LPW)
9002 = Tamperproof Screwdriver
CP = Clear Prismatic Lens
FUS = Single Fusing
DFUS = Double Fusing
D1 = Linear Fluorescent Dimming Ballast
D2= Step Dimming Ballast for T8 Lamp
D10= Step Dimming Ballast for T5 Lamp
GTD = Generator Transfer Device (Bodine)
PRS=
Programmable Rapid Start Ballast
TDM = Tandem Mount (Specify Length)
— Includes Mounting Hardware
L ED OPTIONS
D7 = 0-10V low-voltage LED Dimming (100-30% Standard,
Consult Factory for Other)
D8 = LED Dimming: Forward Phase (Triac)
GC = Diffusion Lens for Glare Control of LED
SG = 10KA Surge Protection for LED fixtures
(meets ANSI spec C62.41.2)
MSE = Motion Sensor External—Single circuit-all on, all off
Specify Finish: White (WH)/Bronze (BZ)
MSE2 = Motion Sensor External—Dual circuit, half on half off
Specify Finish: White (WH)/Bronze (BZ)
MSI = Motion Sensor Integral⓴ Single circuit-all on, all off
MSI2 =Motion Sensor Integral⓴ Dual circuit, half on half off
EMERGENCY OPTIONS❸
No onsite Emergency Power (AC or DC) is provided
Specify Fixture Voltage: 120V or 277V Power Feed
A=120V or B=277V
Fluorescent Emergency Battery
EL1
EL2
EL7
EL9
EL31
EL32
EL49
REL1
REL7
REL9
LED Emergency Battery
EL61 = Integral: LED 12W, ± 720 Lms (Iota)
EL63 = Integral: LED 23W, ± 1290 Lms (Bodine)
EL67 = Integral, Cold Weather: LED 23W,
± 1290 Lms (Iota)
EL82 = Integral: LED 4W (Fulham)—Factory Recom’d
EL85 = Integral: LED 20W (Fulham)—Factory Recom’d
EL88 = Integral: LED 16W (Fulham)—Factory Recom’d
NOTES:
❶ Consult Factory with requests regarding lamp sources, wattages or voltages not shown.
❸ Consult Factory for additional Emergency Battery options.
⓴ Max mounting height of fixture is 10’ (10 feet)
All brands do not currently offer both T5 & T8 step dimming ballasts. Unless you specify a brand, we will select it for you. Osram (50%), Robertson (40%)
Due to form and fit, final selection of the Battery Pack under discretion of Factory
© 2016 Eclipse Lighting Inc.
pg.170 Eclipse Lighting
Rev. May 20, 2016 = Integral: T8, 1 Lamp, 600 Lms
= Integral: T8, 1-2 Lamps, 650 Lm
= Integral: T8, 1-2 Lamp, 1400 Lms
= Integral (574 Only) T8 (1-2), Up to 1400 Lms
= Integral: T5/T5HO, 1 Lamp, 700 Lms
= Integral: T5/T5HO, 1 Lamp, 1325 Lms
= Integral; Cold Weather, T8, 1 Lamp, 1200 Lms
= Remote Emergency Battery: see EL1
= Remote Emergency Battery: see EL7
= Remote Emergency Battery: see EL9
9245 W. Ivanhoe St. I Schiller Park, IL 60176
P: 847-260-0333 I F:847-260-0344 I E: quotes@eclipselightinginc.com I W: eclipselightinginc.com