Catalog Number
Project
Notes
Signature
Date
ECM
ENVIRONMENTAL CONTROL MODULE
POWERFUL INNOVATIVE PRODUCT
SPECIFICATIONS
The patented ECM is connected to selected fixtures and/or
lamps to allow normal operating parameters to be maintained.
In the event of an AC power outage, the fixtures, lamps and/or
loads connected to the ECM will continue or immediately begin
operating at full-light output for a minimum of 90 minutes.
COMPATIBILITY
INSTALLATION
• NO special ballast, lamps or other expensive equipment
are required.
• ECM modules can be installed inside the fixture assembly
(i.e., ballast channel), or in a typical junction box as per
code requirements
• ECM modules can operate individual or multiple loads
• ECM modules can be centrally located for convenience
USE WITH LAMP TYPES
• Incandescent
• Fluorescent or compact fluorescent
• H.I.D
• LED
WARRANTY
• 2 Years limited warranty
• Maintenance contracts available
USE WITH BALLASTS
• Magnetic or electronic
• Dimming or non-dimming
SPECIFICATIONS
Maximum dimensions (HxWxD)
USE WITH MOST CONTROL DEVICES OR
BUILDING MANAGEMENT SYSTEMS
* Electrical
• Dimmer and dimming systems
• Occupancy and/or other sensors
*
1.25” x 1” x 2”
20A@120 or 277 VAC
Rating
Class F
Codes
UL Recognized
Specify ECM to match input voltage
ORDERING INFORMATION:
Line
In
Main
Panel
DSPM
Optional
Emergency
Panel
Batteries
083-0001-02 Rev. A
ECM-277 / 2
ECM1
ECM
Load
Example:
Family
To other loads
Utility Voltage
Quantity
120
277
Notes:
1. Number of ECM’s can be included in the part number of the DSPM Series, or
ordered separately using order matrix above
2. Specifications subject to change without notice
ECM
ENVIRONMENTAL CONTROL MODULE
Dimmer
Panel
Hot
To Other
Loads
Neutral
Blue **
Black **
DSPM
Lighting
Inverter
Hot
Ground
OUT
ECM Interface
Hot
Red **
ECM
H
N
120Vac
Emergency
Load
White
ECM Interface
Utility
Emergency Dimming Bypass Wiring Diagram
POWERFUL INNOVATIVE PRODUCT
GrnYel / Org (test) *
Emg. Hot
Emg. Neutral
IN
H
N
Battery
Pack(s)
Emergency
Load
070-0010-00 Rev C
ECM Interface
To Other
Emergency
Loads
Emg. Hot
Black **
GrnYel/Org (test) *
White
Neutral
Ground
Hot
IN
OUT
DSPM
Lighting
Inverter
Neutral
Normally “OFF” Wiring Diagram
ECM Interface
Battery
Pack(s)
Red **
ECM
Utility
Emergency
Load
Emergency
Load
070-0010-02 Rev C
ECM Interface
Emg. Hot
Emg. Neutral
Hot
Red **
Black **
IN
OUT
ECM Interface
DSPM
Lighting
Inverter
Neutral
Emergency
Load
GrnYel/Org (test)*
ECM
Normal
Load
Blue **
Ground
White
Hot
Battery
Pack(s)
Neutral
Standby With Wall Switch Diagram
Blue (other input)
OUT
Utility
Hot
Wall Switch
1921 S. Quaker Ridge Place
Ontario, CA 91761
Ph: 1.877.DSPM POWER
1.877.377.6769
Fax: 909.930.3335
Neutral
Normal
Load
* Test Line = GreenYellow 120 Vac / Orange 277 Vac
** 20 Amps Maximum
More Diagrams @ www.DSPManufacturing.com