lumenalpha™ downlight

advertisement
lumenalpha™ downlight
Specification Sheet
MULTI 4
Client
Project name
Order#Type
Qty
FEATURES AND BENEFITS
Physical
• • • • • Housing material: aluminum housing
Reflector material: metallized polycarbonate
Trim finish: white, black, nickel satin or trimless
Adjustability: Up to 30° tilt (per gimbal, see page 3 for details)
Damp location rating (interior applications only)
Performance
• • • • • 30°
tilt
Nominal lumen outputs: 700, 1000, 1300 and 2000 lumens
Optics: 20°, 40° or 60°
CRI value: 80+, 95+, Radiant 80+ or Radiant 95+
Lumen maintenance: L70 @ 90,000 hrs [25°C]
Operating temperatures: -20° C to 40° C [-4F to 104F]
Electrical
• Input voltage:120 or 277V, consult factory for 347V
• Control options: non-dimming, 0-10 volt dimming, DALI dimming,
Lumentalk dimming or Lutron® EcoSystem® Enabled dimming
Performance summary, 1 fixture head
Based on Medium (40°), 4000K, CRI 80+
non-insulated ceiling
insulated ceiling
Nominal
Delivered
output [lm] output [lm]
Efficacy
[lm/W]
Power**
[W]
Efficacy
[lm/W]
700*
716
7
102
9
79
1000
1023
10
102
12
85
1300
1330
N/A
N/A
16
83
2000
2046
N/A
N/A
25
81
*Photometric performance is measured in compliance with IESNA LM-79-08.
**Add 3 watts per fixture head when specifying Lumentalk™.
2000lm CR80/RCR80
700/1000/1300lm
Power
[W]
3
5 4 "
[146mm]
5"
[126mm]
SIDE VIEW
Narrow (20°)
Medium (40°)
13
9 16 "
[249mm]
13
"
16
[249mm]
9
25"
8
[66mm]
Wide (60°)
BOTTOM VIEW
Cutout: 9 1/4" x 9 1/4" [235mm x 235mm]
Maximum ceiling thickness: 1" [25mm]
1/14
© Copyright Lumenpulse 2016
24/MR/2016
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
S.Ayite - Rev.9
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
5-year limited warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumenalpha™ downlight
Specification Sheet
MULTI 4
TRIMLESS VERSION
2000lm CR80/RCR80
700/1000/1300lm
13
"
16
[148mm]
5
5"
[128mm]
SIDE VIEW
3
8 "
[264mm]
10
3
"
8
[264mm]
10
25"
8
[66mm]
30°
tilt
BOTTOM VIEW
Cutout: 9 1/4" x 9 1/4" [235mm x 235mm]
Maximum ceiling thickness: 1" [25mm]
2/14
© Copyright Lumenpulse 2016
24/MR/2016
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
S.Ayite - Rev.9
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
5-year limited warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumenalpha™ downlight
Specification Sheet
MULTI 4
TILT LIMITS - TYPICAL LAYOUTS
THE POSITION OF EACH HEAD
WILL VARY BY INSTALLATION.
EACH HEAD CAN BE TILTED IN ANY
DIRECTION BUT THE HEATSINKS
MUST
NOT COME IN CONTACT WITH
ONE ANOTHER.
700/1000/1300lm
0° 15° 15°
0°
SIDE VIEW
30°
0°
30°
0°
0°
SIDE VIEW
30°
0°
30°
SIDE VIEW
30°
0°
0°
0°
0°
30°
SIDE VIEW
2000lm CR80/RCR80
0° 5°
SIDE VIEW
5° 0°
25°
0°
0°
SIDE VIEW
3/14
© Copyright Lumenpulse 2016
24/MR/2016
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
S.Ayite - Rev.9
25°
0°
25°
0°
25°
SIDE VIEW
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
30°
30°
SIDE VIEW
5-year limited warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumenalpha™ downlight
Specification Sheet
MULTI 4
PHOTOMETRIC INFORMATION
Narrow (20°), one fixture head, all color temperatures
Non-insulated ceiling installation types (RM and NC)1,2
Nominal
output [lm]
Power
[W]†
Delivered
output [lm]†
CR80
CR95
700*
9
11
716
1000
12
15
1023
1300
16
20
1330
2000
25
N/A
2046
Candlepower
distribution
1942
Illuminance cone
Center Beam
Illuminance
Beam
Diameter
Height
78fc [832 lx]
3.5’ [1.0m]
10’ [3m]
35fc [370 lx]
5.3’ [1.6m]
15’ [4.5m]
19fc [208 lx]
7.1’ [2.1m]
20’ [6m]
3885
5828
7771
Medium (40°), one fixture head all color temperatures
Non-insulated ceiling installation types (RM and NC)1,2
Nominal
output [lm]
Power
[W]†
Delivered
output [lm]†
CR80
CR95
700*
9
11
716
1000
12
15
1023
1300
16
20
1330
2000
25
N/A
2046
Candlepower
distribution
1025
Illuminance cone
Center Beam
Illuminance
Beam
Diameter
Height
41fc [439 lx]
7.3’ [2.2m]
18fc [195 lx]
10.9’ [3.3m]
15’ [4.5m]
10fc [110 lx]
14.6’ [4.4m]
20’ [6m]
10’ [3m]
2051
3076
4103
Wide (60°), one fixture head, all color temperatures
Non-insulated ceiling installation types (RM and NC)1,2
Nominal
output [lm]
Power
[W]†
Delivered
output [lm]†
CR80
CR95
700*
9
11
728
1000
12
15
1040
1300
16
20
1352
2000
25
N/A
2080
Candlepower
distribution
651
1302
1954
2606
Illuminance cone
Center beam
Illuminance
Beam
Diameter
Height
26fc [279 lx]
11.5’ [3.5m]
10’ [3m]
12fc [124 lx]
17.3’ [5.2m]
15’ [4.5m]
7fc [70 lx]
23.1’ [7.0m]
20’ [6m]
Remove 2 watts per fixture head when specifying new construction insulated ceiling installation types (IC and CP).
Add 3 watts per fixture head when specifying Lumentalk™.
*Photometric performance is measured in compliance with IESNA LM-79-08.
†
Delivered wattage and delivered output: +/- 10% tolerance.
1
2
4/14
© Copyright Lumenpulse 2016
24/MR/2016
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
S.Ayite - Rev.9
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
5-year limited warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumenalpha™ downlight
Specification Sheet
MULTI 4
PHOTOMETRIC INFORMATION - continued
Color Rendering options comparison, 3000K
Color sample
Ra R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 R14 R15
CRI 80+
81
80
85
89
81
78
80
86
66
16
64
79
58
81
93
75
CRI 95+
98
98
99
98
98
98
97
98
98
96
99
98
88
98
98
98
Radiant CRI 80+
81
81
86
89
81
80
80
85
68
16
66
80
62
82
93
77
Radiant CRI 95+
95
99
98
97
96
98
96
95
94
90
97
95
97
98
98
98
CONTROL OPTIONS
Linear Curve
Brightness %
DA1 - 0-10V dimming, 1% linear
DA2 - 0-10V dimming, 1% logarithmic
Logarithmic curve
Dimming down to 0.1%
DALI dimming
DALI1 - DALI dimming, 0.1% linear
DALI2 - DALI dimming, 0.1% logarithmic
Brightness %
Dimming down to 1%
0-10V dimming
Voltage %
Voltage %
Professional dimming down to 0.1%
0-10V dimming
PDA1 - Professional 0-10V dimming, 0.1% linear
PDA2 - Professional 0-10V dimming, 0.1% logarithmic
Lumentalk dimming
LT - Lumentalk dimming, 1% minimum dimming value
Lutron® EcoSystem® Enabled dimming
H-Series LED driver
ES - Lutron® EcoSystem® Enabled dimming, 1% minimum dimming value
5/14
© Copyright Lumenpulse 2016
24/MR/2016
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
S.Ayite - Rev.9
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
5-year limited warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumenalpha™ downlight
Specification Sheet
MULTI 4
INSTALLATION TYPES
Minimum Ceiling Height Requirements
Up to 1000lm (CRI 80)
1300lm (CRI 80)
1000lm (CRI 95)
2000lm (CRI 80 only)
3000lm
7"
7"
7"
N/A
Remodel (RM)
New Construction (NC)
6"
6"
7"
N/A
Insulation Contact (IC/CP)
7"
N/A
N/A
N/A
7
"
8
[99mm]
13"
[331mm]
3
24" LONG
[610mm]
7
"
8
[99mm]
3
61 "
2
[165mm]
13"
[331mm]
TOP VIEW
Available knockout holes:
2x Ø7/8" [22mm]
Internal wire gauge:
18 AWG
13
"
16
[71mm]
2
SIDE VIEW
Available knockout holes:
4x Ø7/8" [22mm]
Internal wire gauge:
18 AWG
3
"
11
16
[285mm]
FRONT VIEW
SIDE VIEW
13
11 "
16
[300mm]
TOP VIEW
33 "
8
[85mm]
10"
[254mm]
FRONT VIEW
LAMC4-MTG-A-VOLTAGE-OUTPUT-COLOR RENDERING-TL-RM*
Remodel non-insulated ceiling - Lumentalk dimming
LAMC4-MTG-A-VOLTAGE-OUTPUT-COLOR RENDERING-CONTROL-RM
Remodel non-insulated ceiling - all control options except Lumentalk
*Lumentalk dimming available for 700 lumens (CR80 or RCR80)
and 1000 lumens (CR80 or RCR80) only
MIN
1 "
4
[362mm]
14
MAX
1 "
2
[650mm]
25
3
"
8
[594mm]
Available knockout holes:
3x Ø7/8"
Internal wire gauge: 18 AWG
23
11
"
16
[297mm]
11
1
"
16
[179mm]
7
TOP VIEW
15
"
16
[379mm]
14
1
"
4
[133mm]
5
MAX
1 "
2
[125mm] [162mm]
MIN
5"
6
FRONT VIEW
LAMC4-MTG-A-VOLTAGE-OUTPUT-COLOR RENDERING-CONTROL-NC
New construction non-insulated ceiling
6/14
© Copyright Lumenpulse 2016
24/MR/2016
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
S.Ayite - Rev.9
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
5-year limited warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumenalpha™ downlight
Specification Sheet
MULTI 4
INSTALLATION TYPES - continued
MIN
1 "
4
[362mm]
14
MAX
1 "
2
[650mm]
25
Available knockout holes:
2x Ø1-1/8", 3x Ø7/8", 1x Ø5/8"
Internal wire gauge: 18 AWG
3
"
4
[629mm]
24
11
"
16
[297mm]
11
1
"
16
[179mm]
7
TOP VIEW
15 "
16
[379mm]
14
9
"
16
[217mm]
8
MAX
1 "
6
2
[125mm] [162mm]
MIN
5"
FRONT VIEW
LAMC4-MTG-A-VOLTAGE-OUTPUT-COLOR RENDERING-CONTROL-IC/CP*
New construction insulated ceiling
New construction insulated ceiling, Chicago plenum rated option, airtight
*Available for the following output and color rendering combinations:
Color rendering
Nominal
output [lm]
CR80
CR95
L07
YES
YES
YES
YES
L10
YES
N/A
YES
N/A
RCR80 RCR95
7/14
© Copyright Lumenpulse 2016
24/MR/2016
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
S.Ayite - Rev.9
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
5-year limited warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumenalpha™ downlight
Specification Sheet
MULTI 4
WIRING DETAILS
RM: remodel non-insulated ceiling
No Control
Input
(conduit, fitting & locknut
by others)
Line (black)
Neutral (white)
Ground (green)
Secure data wires
if not in use
Thermal protector
Output to luminaire
Control
(DA1, DA2, PDA1, PDA2, DALI1, DALI2, EcoSystem®)*
Line (black)
Input
(conduit, fitting & locknut
by others)
Neutral (white)
Ground (green)
Thermal protector
Data - (gray)
Output to luminaire
Data + (purple)
Control (Daisy Chain Layout)
(DA1, DA2, PDA1, PDA2, DALI1, DALI2, EcoSystem®)*
Line (black)
Input
(conduit, fitting & locknut
by others)
Neutral (white)
Ground (green)
Thermal protector
Data - (gray)
Output to luminaire
Data + (purple)
Output to next luminaire
(conduit, fitting & locknut
by others)
*Each Multi fixture head has its own address; a Multi 4 fixture has four EcoSystem® addresses.
Lutron® EcoSystem® Enabled dimming is not available for 700 Lumens (CR95 or RCR95).
8/14
© Copyright Lumenpulse 2016
24/MR/2016
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
S.Ayite - Rev.9
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
5-year limited warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumenalpha™ downlight
Specification Sheet
MULTI 4
WIRING DETAILS - continued
RM: remodel non-insulated ceiling
Lumentalk dimming available for 700 Lumens (CR80 or RCR80) and 1000 Lumens (CR80 or RCR80) only
Control
(LT)
Ground (green)
Line (black)
Output to luminaire
Neutral (white)
Input
(conduit, fitting &
locknut by others)
Thermal protector
Control (Daisy Chain Layout)
(LT)
Ground (green)
Line (black)
Output to luminaire
Neutral (white)
Input
(conduit, fitting &
locknut by others)
Output
to next luminaire
Thermal protector
9/14
© Copyright Lumenpulse 2016
24/MR/2016
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
S.Ayite - Rev.9
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
5-year limited warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumenalpha™ downlight
Specification Sheet
MULTI 4
WIRING DETAILS - continued
NC: new construction non-insulated ceiling
No Control
Optional
Output
Power Input
Conduit (by others)
Conduit fitting (by others)
Locknut (by others)
Neutral (white)
Line (black)
Ground (green)
Thermal
protector
Output to luminaire
Control
(DA1, DA2, PDA1, PDA2, DALI1, DALI2, EcoSystem®)*
Data Input
from Control System
Power
Input
Conduit (by others)
Data +
(purple)
Conduit fitting (by others)
Locknut (by others)
Neutral (white)
Line (black)
Ground (green)
Data (gray)
Thermal
protector
Output to luminaire
Control (Daisy Chain Layout)
(DA1, DA2, PDA1, PDA2, DALI1, DALI2, EcoSystem®)*
Data Input
from Control
System
Power
Input
Optional
Output
Conduit (by others)
Data +
(purple)
Conduit fitting (by others)
Locknut (by others)
Data (gray)
Neutral (white)
Line (black)
Ground (green)
Thermal
protector
Output to luminaire
*Each Multi fixture head has its own address; a Multi 4 fixture has four EcoSystem® addresses.
Lutron® EcoSystem® Enabled dimming is not available for 700 Lumens (CR95 or RCR95).
10/14
© Copyright Lumenpulse 2016
24/MR/2016
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
S.Ayite - Rev.9
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
5-year limited warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumenalpha™ downlight
Specification Sheet
MULTI 4
WIRING DETAILS - continued
IC/CP: new construction insulated ceiling
Insulated ceiling up to 1000 Lumens (CR80 or RCR80)
No Control
Power Input
Optional Output
Conduit (by others)
Ground (green)
Ground (copper)
Conduit fitting (by others)
Locknut (by others)
Line (black)
Neutral (white)
Control
(DA1, DA2, PDA1, PDA2, DALI1, DALI2)
Power Input
Data Input
from Control
System
Conduit (by others)
Ground (green)
Ground (copper)
Conduit fitting (by others)
Locknut (by others)
Line (black)
Data + (purple)
Data - (gray)
Neutral (white)
Control (Daisy Chain Layout)
(DA1, DA2, PDA1, PDA2, DALI1, DALI2)
Power
Input
Power
Output
to next
luminaire
Data Input Data Output
to next
from Control
luminaire
System
Conduit (by others)
Ground (green)
Ground (copper)
Duplex connector
(by others)
Locknut (by others)
Line (black)
Data + (purple)
Data - (gray)
Neutral (white)
11/14
© Copyright Lumenpulse 2016
24/MR/2016
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
S.Ayite - Rev.9
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
5-year limited warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumenalpha™ downlight
Specification Sheet
MULTI 4
OPTICAL ACCESSORIES
HL - Honeycomb louver
SL - Softening glass lens
CL - Clear glass lens
WHSN - White snoot
BKSN - Black snoot
One lens or honeycomb louver can be installed per head. The snoot can
be combined with any accessory.
Accessories are the same for each head as a standard. Custom
accessories combination available, see Personalized Multi Submittal
Drawing for ordering information.
12/14
© Copyright Lumenpulse 2016
24/MR/2016
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
S.Ayite - Rev.9
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
5-year limited warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumenalpha™ downlight
Specification Sheet
MULTI 4
HOW TO ORDER
LAMC4
Select:
Select:
A 1
1
2
3
Select:
Select:
Select:
4
5
Region:
6
7
8
Voltage:
9
120 - 120 volts
277 - 277 volts
10
Color Temperature:
Interior Finish:
Trim Finish:
Control:
*1% minimum dimming value. Lumentalk dimming available for
RM installation type only. Lumentalk dimming available for
700 Lumens (CR80 or RCR80) and 1000 Lumens (CR80 or RCR80) only.
*Refer to Personalized Multi Submittal Drawing for ordering information.
**Four EcoSystem® addresses per fixture. 1% minimum dimming value.
Lutron® EcoSystem® Enabled dimming available for RM and NC installation
Color Rendering:
types only. Lutron® EcoSystem® Enabled dimming is not available for
700 Lumens (CR95 or RCR95).
CR80 - CRI 80+
CR95 - CRI 95+, up to 1300 lumen output
RCR80 - Radiant CRI 80+*
RCR95 - Radiant CRI 95+, up to 1300 lumen output*
11
Installation Type:
RM - Remodel non-insulated ceiling
NC - New construction non-insulated ceiling
IC - New construction insulated ceiling*
CP - New construction insulated ceiling, Chicago
plenum rated option, airtight*
*Radiant CRI options available for 3000K only.
Optics:
*Insulated ceiling up to 1000 Lumens (CR80 or RCR80).
N - Narrow distribution 20o
M - Medium distribution 40o
W - Wide distribution 60o
CM - Custom optics combination*
12
* Refer to Personalized Multi Submittal Drawing for ordering information.
7
12
NO - On/Off control
DA1 - 0-10V dimming, 1% linear
DA2 - 0-10V dimming, 1% logarithmic
PDA1 - Pro 0-10V dimming, 0.1% linear
PDA2 - Pro 0-10V dimming, 0.1% logarithmic
DALI1 - DALI dimming, 0.1% linear
DALI2 - DALI dimming, 0.1% logarithmic
LT - Lumentalk dimming*
ES - Lutron® EcoSystem® Enabled dimming**
27K - 2700K
30K - 3000K
35K - 3500K
40K - 4000K
CM - Custom color temperature combination*
6
11
TRL - Trimless
Output (nominal lumens per head):
*CRI 80+ only.
5
10
NST - Nickel satin trim
L07 - 700 lumens
L10 - 1000 lumens
L13 - 1300 lumens
L20 - 2000 lumens*
4
9
WH - White trim
BK - Black trim
Consult factory for 347 volts.
3
8
IWH - Interior white
IBK - Interior black
A - Americas
2
Select:
Select:
Select:
Select:
Select:
SQ
Trim Shape:
SQ - Square shape
Accessories (factory installed):
NA - No accessory
HL - Honeycomb louver
SL - Softening glass lens
CL - Clear glass lens
WHSN - White snoot
BKSN - Black snoot
CM - Custom accessories combination*
* Refer to Personalized Multi Submittal Drawing for ordering information.
One lens or honeycomb louver can be installed per head. The snoot can be
combined with any accessory.
13/14
© Copyright Lumenpulse 2016
24/MR/2016
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
S.Ayite - Rev.9
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
5-year limited warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumenalpha™ downlight
Personalized Multi Submittal Drawing
MULTI 4
Client
Project name
Order#Type
Qty
PERSONALIZED MULTI SUBMITTAL DRAWING
Use this sheet to define specific color temperature, optics and accessory combinations for each head.
Attach to your order. If you need all heads to be the same, use standard ordering code.
1
2
3
4
HEAD 1
HEAD 2
Color Temperature:
Select:
Color Temperature:
Select:
Optics:
Select:
Optics:
Select:
Accessories:
Select:
Accessories:
Select:
Select:
HEAD 3
Select:
HEAD 4
Color Temperature:
Select:
Color Temperature:
Select:
Optics:
Select:
Optics:
Select:
Accessories:
Select:
Accessories:
Select:
Select:
© Copyright Lumenpulse 2016
24/MR/2016
S.Ayite - Rev.9
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
1.877.937.3003
P.514.937.3003
F. 514.937.6289
info@lumenpulse.com
www.lumenpulse.com
Select:
5-year limited warranty.
Consult www.lumenpulse.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
Download