600KW RESISTIVE POWER PROVING LOAD BANK www

advertisement
www.vikingpowersystems.com
600KW RESISTIVE
POWER PROVING
LOAD BANK









IP65 STAINLESS STEEL LOAD RESISTORS
CIRCUIT BREAKERS ON EACH LOAD GROUP
CONTACTOR SWITCHING IN 5KW STEPS
LOW-WATTS DENSITY LOAD RESISTORS
OVER TEMPERATURE & FAN FAIL PROTECTION
IP55 FAN MOTOR & ALUMINIUM COOLING FAN
INSULATED RESISTOR COMPARTMENT
2MM ZINC COATED STEEL BODY
STAINLESS STEEL GRILLE AND FASTENERS
SPECIFICATIONS
DIMENSIONS Standard : H:1965mm W:1425mm D:1225mm
Fork lift frame (pictured): H:2225mm W:1600mm D:1400mm
UNIT WEIGHT Standard : 715 KG, with forklift base:1080 KG
STANDARD RATING: 600KW @ 400 volt AC +/- 10% , 50Hz, 3
wire (Other voltages and Hz ratings available)
LOAD STEPS: 1 x 5KW, 1 x 10KW, 1 x 20KW, 5 x 40KW,
3 x 80KW & 1 x 120KW switching in 5KW load increments.
DIGITAL METERING: Backlit LCD power meter. Volts, Amps
KW, KVA, KWH, PF with RS-485 Mod-Bus communication
RESISTOR WIRING: 200 degree ’C’ rated silicone insulated
LOAD CABLE CONNECTIONS: 50 x 10mm Copper busbar with
2 x M12 bolted connections per phase
FAN MOTOR: 7.5KW, 400 VOLT +/- 10%, 50Hz ,4 pole TEFC,
IP55. DOL start with thermal overload
FINISH: Grey/black UV stabilised Powder Coat with stainless
steel inlet and discharge grilles and fasteners
ENCLOSURE: IP54 (control panel door closed)
IP44 (control panel door open)
SOUND LEVEL: 88 dba @ 2 metres
OPTIONAL EQUIPMENT
FORK LIFT FRAME: 50 x 50 x 4.5mm electro-zinc plated & powder coated hollow box section roll frame with 4
point top lift and heavy duty hot dip galvanised forklift base (pictured above)
AUXILLARY POWER: External power supply for control/fan: 32 amp , 3 phase, 4 pin power inlet socket with panel
mounted changeover switch
FAN REVERSE : Fan motor reversing switch to change air flow direction when supply phase rotation is incorrect
POWERLOCK: Powerlock twist type shielded connectors for incoming power supply (400 amp rated )
CABLE HANGERS: Folding hanger brackets (2) for flexible cable storage (picured above)
VIKING POWER SYSTEMS Co. Ltd
242/44 Moo 3 T. Phala A. Ban Chang Rayong 21130 THAILAND
Ph: +66 (0)84 3258889 Fax: +66 (0) 38 602244 E-mail: info@vikingpowersystems.com
Copyright 2013 Viking Power Systems Co. Ltd
600KW RESISTIVE POWER PROVING LOAD BANK
CONTROL OPTIONS
STANDARD PLC TOUCH SCREEN







Integrated 7” colour touch screen / PLC controller
Twin KW display shows both KW pre-selected and KW on-line
Synchronised cooling fan start when load is connected
Auto Cool down timer (300 second) with digital display
Load step selection (5KW, 10KW, 20KW & 40KW)
Automatic selection of resistor steps for load selected
Displayed fault and status indication on main screen





Emergency Stop (status)
High Temperature (status / fault)
Load Bank (on-line / off-line
Cooling fan Air Flow (status / fault)
Cool down Timer (timing status)
 Plain English help and diagnostic screens
 Isolation transformer (400/220V) and 24 volt DC regulated power
supply for safe and stable control system power
MANUAL SWITCHED CONTROLS (OPTIONAL)






Industrial quality rotary switches with 10 amp contacts for all control functions and LED indicator lamps
Cooling fan switch (Off - Cool Down - On) with interlock to prevent load application without cooling fan running
Fault indicator lamp (LED) for fan failure and high temperature
Load switches (Off - On) for each load group
Load steps 5KW, 10KW & 20KW that can be combined to give increasing or decreasing load in 5KW steps
Isolation transformer (400/220 volt) for power supply to all load bank controls and switches
AUSTRALIAN DISTRIBUTOR
GENERATOR POWER PTY LTD
6 - 8 EXCELLER AVENUE
BANKSTOWN NSW 2200
PH: 02 9790 6800 FAX: 02 9790 6400
: www.generatorpower.com.au
VIKING POWER SYSTEMS Co. Ltd
Due to on-going product development these specifications are subject to changes or modification
Download