www.vikingpowersystems.com
1000KW RESISTIVE
POWER PROVING
LOAD BANK
 IP65 LOW WATTS DENSITY STAINLESS
STEEL LOAD RESISTORS
 CIRCUIT BREAKERS ON EACH LOAD GROUP
 TOUCH SCREEN PLC CONTROLLED CONTACTOR
SWITCHING IN 5KW STEPS





OVER TEMPERATURE & FAN FAIL PROTECTION
IP55 FAN MOTORS (2) & ALUMINIUM COOLING FANS
INSULATED RESISTOR COMPARTMENT
2MM ZINC COATED STEEL BODY
STAINLESS STEEL GRILLES AND FASTENERS
SPECIFICATIONS
DIMENSIONS Standard : H: 1885 mm W: 1400 mm L: 2900 mm
(with standard forklift base and lifting frame)
UNIT WEIGHT With base and lifting frame: 1480 KG
STANDARD RATING: 1000KW @ 400 volt AC +/- 10% , 50Hz,
3 wire (Other voltages and Hz ratings available)
LOAD STEPS: 2 x 5KW, 1 x 10KW, 1 x 20KW, 1 x 40KW,
2 x 80KW,1 x 160KW & 3 x 200KW allowing combinations for
5KW incremental loading.
DIGITAL METERING: Backlit LCD power meter. Volts, Amps
KW, KVA, KWH, PF with RS-485 Mod-Bus communication
RESISTOR WIRING: 200 degree ’C’ rated silicone insulated
LOAD CABLE CONNECTIONS: 50 x 10mm Copper busbars (2)
with 4 x M12 bolted connections per phase
FAN MOTORS: 2 x 7.5KW, 400 VOLT +/- 10%, 50Hz ,4 pole
TEFC, IP55. DOL start with thermal overload
FINISH: Grey/black UV stabilised Powder Coat with stainless
steel inlet and discharge grilles and fasteners
ENCLOSURE: IP54 (control panel door closed)
IP44 (control panel door open)
SOUND LEVEL: 91 dba @ 2 metres
OPTIONAL EQUIPMENT
FIXED INSTALLATION BASE: Hot dip galvanised 150 x 75 x 4.5mm structural ‘C’ channel mounting base with
four (4) pad eyes for lifting.
AUXILLARY POWER: External power supply for control/fan: 32 amp , 3 phase, 4 pin power inlet socket with panel
mounted changeover switch
FAN REVERSE : Fan motor reversing switch to change air flow direction when supply phase rotation is incorrect
CABLE HANGERS: Folding hanger brackets (4) for flexible cable storage
VIKING POWER SYSTEMS Co. Ltd
242/44 Moo 3 T. Phala A. Ban Chang Rayong 21130 THAILAND
Ph: +66 (0)84 3258889 Fax: +66 (0) 38 602244 E-mail: info@vikingpowersystems.com
Copyright 2014 Viking Power Systems Co. Ltd
1000KW RESISTIVE POWER PROVING LOAD BANK
CONTROL OPTIONS
STANDARD PLC TOUCH SCREEN







Integrated 7” colour touch screen / PLC controller
Twin KW display shows both KW pre-selected and KW on-line
Synchronised cooling fan start when load is connected
Auto Cool down timer (300 second) with digital display
Load step selection (5KW, 10KW, 20KW & 40KW)
Automatic selection of resistor steps for load selected
Displayed fault and status indication on main screen





Emergency Stop (status)
High Temperature (status / fault)
Load Bank (on-line / off-line
Cooling fan Air Flow (status / fault)
Cool down Timer (timing status)
 Plain English help and diagnostic screens
 Isolation transformer (400/220V) and 24 volt DC regulated power
supply for safe and stable control system power
MANUAL SWITCHED CONTROLS (OPTIONAL)






Industrial quality rotary switches with 10 amp contacts for all control functions and LED indicator lamps
Cooling fan switch (Off - Cool Down - On) with interlock to prevent load application without cooling fan running
Fault indicator lamp (LED) for fan failure and high temperature
Load switches (Off - On) for each load group
Load steps 5KW to 200KW that can be combined to give increasing or decreasing load in 5KW steps
Isolation transformer (400/220 volt) for power supply to all load bank controls and switches
AUSTRALIAN DISTRIBUTOR
GENERATOR POWER PTY LTD
6 - 8 EXCELLER AVENUE
BANKSTOWN NSW 2200
PH: 02 9790 6800 FAX: 02 9790 6400
: www.generatorpower.com.au
VIKING POWER SYSTEMS Co. Ltd
Due to on-going product development these specifications are subject to changes or modification