6” SLOPED CEILING INCANDESCENT
REMODEL - TYPE IC
(E-RSR6SIC)
Applications: For use in insulated ceilings and can be installed in direct contact with insulation.
14-1/8"
(159mm)
7-1/4"
(184mm)
6-1/2"
(165mm)
IC-806R
•
•
•
•
•
•
•
•
•
•
Catalog #
Ceiling
Cut-Out
Plaster
Frame
E-RSR6SIC
7-1/16" x 6-7/8" oval
N/A
Construction & Materials
Junction Box is listed for eight (4in - 4 out) No.12 AWG (90˚C)
through-branch conductors and has five 1/2”, one 3/4” and
four Romex knockouts with true pry out slots.
Romex knockouts include built in strain relief - no additional clamps required.
Has eight 1/2”, and four Romex knockouts.
Pre-installed hanger bars allow housing to be positioned at any point
within 24” joist span. Score lines provided for easy field shortening to
accommodate 12” joist span.
Hanger Bars are designed to fit on to T-Bar spine for quick alignment and
can be permanently secured without the need of additional clips.
Housing comes complete with four remodel clips to
accommodate ceiling thickness from 3/8” to 5/8”
7-1/2” height allows use in 2” X 8” joist construction.
Designed for sloped ceilings from 2/12 to 6/12 pitch.
The socket swivels to align lamp direction.
New construction sealed and gasketed construction limits air
exchange between the ceiling plenum and heated or air conditioned
areas – performance tested to ASTM-E283 (Washington State)
Trims
• E-T6280CL - Reflector
• E-T6380BK - Black Metal Baffle
Lamp
(Ordered Separately)
Max 75W Consult trim description
for lamp type and wattage
Lamp Base
Medium Base
Performance
• 2-year limited warranty
Electrical
Regulatory
• UL, cUL listed for use in damp locations
• UL, cUL wet locations listed with select trims
• Meets State of California Title 24 requirements.
• E-T6380WH - White Metal Baffle
• E-T6540WH - Fresnal Glass Lens w/Reflector
• E-T6541WH - Albalite Glass Lens w/Reflector
• E-T6543WH - Drop Opal Glass Lens w/Reflector
• E-T6730WH - Eyeball
Due to continuous product improvement, information in this document is subject to change. All published photometric testing performed to IESNA LM-79-08
standards by a NVLAP certified laboratory. Fixture photometry was completed on a single representative fixture. Actual production units may vary up to
±10% of initial delivered lumens. Lumen maintenance values at 25˚C (77˚F) are calculated per TM-21 based on LM-80 data and in-situ fixture testing.
1501 96th Street, Sturtevant, WI 53177 | Phone (888)243-9445 | Fax (262)504-5409 | www.e–conolight.com
6” SLOPED CEILING INCANDESCENT
REMODEL - TYPE IC
(E-RSR6SIC)
Albalite Glass Lens w/Reflector
• 40W A19
• Specular Clear Reflector
• White Plastic Trim Ring
• Wet Location Listed
• O.D. 8"
Reflector
• 90W PAR38
• Specular Clear reflector
• White Plastic Trim Ring
• O.D. 7-7/8"
CAT.# E-T6280CL
CAT.# E-T6541WH
Drop Opal Glass Lens w/Reflector
• 40W A19
• Specular Clear Reflector
• White Plastic Trim Ring
• Wet Location Listed
• O.D. 8"
Black Metal Baffle
• 90W PAR38
• White Plastic Trim Ring
• O.D. 7-7/8"
CAT.# E-T6380BK
CAT.# E-T6543WH
Eyeball
• 75W PAR30L, 65W BR30
• White Metal Trim Ring
• Vertical adjustment 0˚-30˚
• O.D. 7-3/4"
White Metal Baffle
• 90W PAR38
• White Plastic Trim Ring
• O.D. 7-7/8"
CAT.# E-T6380WH
CAT.# E-T6730WH
Fresnel Glass Lens w/Reflector
• 40W A19
• Specular Clear Reflector
• White Plastic Trim Ring
• Wet Location Listed
• O.D. 8"
CAT.# E-T6540WH
Due to continuous product improvement, information in this document is subject to change. All published photometric testing performed to IESNA LM-79-08
standards by a NVLAP certified laboratory. Fixture photometry was completed on a single representative fixture. Actual production units may vary up to
±10% of initial delivered lumens. Lumen maintenance values at 25˚C (77˚F) are calculated per TM-21 based on LM-80 data and in-situ fixture testing.
1501 96th Street, Sturtevant, WI 53177 | Phone (888)243-9445 | Fax (262)504-5409 | www.e–conolight.com