Power Electronics / Electrical Machines / Drive
Technology
Equipment and systems for vocational qualifications and engineering education on the following topics:
Electrical machines, power electronics, drive technology
Complete machine labs, electrical machine labs and drive technology
EEM Electrical machines 300W
EEM Electrical machines 300W
Electrical machines convert electrical energy into mechanical energy or vice versa. A fundamental distinction
can be drawn between DC, AC and three-phase machines.
The machines used for training in electrical engineering are designed so that nearly all of the circuitry and drives
found in industry, commerce and at home can be conveyed in a didactic fashion in hands-on training. Using the
servo drive and braking system it is possible to easily determine all of the relevant data for electrical machines.
Lucas Nülle GmbH
Page 1/5
www.lucas-nuelle.com
EEM 4-3 Asynchronous machines 300W
EEM 4-3 Asynchronous machines 300W
Asynchronous machines can be found with power levels ranging up into the MW range. Due to their simple
design asynchronous squirrel-cage machines are particularly widespread.
The training objectives are:
Motor connection
Reversing rotation direction
Manual switching
Machine-specific values and characteristics
Measurement evaluation
Lucas Nülle GmbH
Page 2/5
www.lucas-nuelle.com
EEM 4.5-3 Fault simulation on electrical machines
300W
EEM 4.5-3 Fault simulation on electrical machines 300W
Fault simulation performed by measuring winding and insulation resistances. All measurements are performed in
the no-voltage state. The following faults can be simulated:
Winding breaks in the coils
Insulation faults winding to winding
Insulation faults winding to frame
Combinations of different faults
Fault monitoring and repair instructions
Basic equipment set, consisting of:
Basic equipment set, consisting of:
Pos.
Product name
Bestell-Nr.
Anz.
1 Fault simulator forthree-phase asynchronous squirrel-cage motor
SE2662-9D
1
2 Three-phase asynchronous motor, squirrel-cage, 0.3 kW
SE2672-3G
1
3 Insulation tester Insu 10
LM2333
1
Lucas Nülle GmbH
Page 3/5
www.lucas-nuelle.com
Media:
Pos.
Product name
Bestell-Nr.
4 Manual EEM/F, Troubleshooting on electrical machines
Anz.
SH5002-3P
1
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Pos.
Product name
Bestell-Nr.
Anz.
5 Servo machine test stand for 0.3kW machines incl. software
ActiveServo (D,GB,F,E)
CO3636-6V
1
6 Rubber coupling sleeve, 0.3kW
SE2662-2A
1
7 Coupling guard, 0.1/0.3kW, transparent
SE2662-7B
1
8 QuickChart, Servo-machine test stand safety and operating
instructions (GB)
SO6200-7D
1
Power supply:
Pos.
Product name
Bestell-Nr.
9 Universal power supply for electrical machines
CO3212-5U
Anz.
1
Measuring instruments:
Pos.
Product name
Bestell-Nr.
10 Analog/digital multimeter, wattmeter + power-factor meter incl.
software
Lucas Nülle GmbH
Page 4/5
CO5127-1Z
Anz.
1
www.lucas-nuelle.com
Accessories:
Pos.
Product name
Bestell-Nr.
Anz.
11 Set of safety measurement cables, 4mm (31 leads)
SO5148-1L
1
12 Safety connecting plug 4mm with tap (2x), black, 1000V/32A CAT II
SO5126-3R
20
13 Safety connecting plug 4mm with tap (2x), blue, 1000V/32A CAT II
SO5126-3V
2
14 Safety connecting plug 4mm with tap (2x), green/yellow,
1000V/32A CAT II
SO5126-3W
2
15 Mobile aluminium experiment stand, 3 levels, power strip with 6
sockets, 1250x700x1995mm
ST7200-3A
1
16 Power supply for working stations
ST8008-8M
1
17 Wall or aluminium-profile mounting cable storage for 48 cables
ST8003-8E
1
18 PC holder for SybaPro experiment trolleys, height and width
adjustable
ST7200-5A
1
19 Monitor holder for flat screen monitor of weight up to 15kg,VESA
75/100
ST8010-4T
1
20 Keyboard adapter for flat screen monitor holders
ST8010-4G
1
21 Protection cover for three-level experiment trolleys
ST8010-9Y
1
Lucas Nülle GmbH
Page 5/5
www.lucas-nuelle.com