Product
Specifications
IllumaTech
.........................
IllumaTech™ Lighting Controls
• UL Listed (File # E-31373)
• CSA Certified (File # LR-3413)
• Decora styling coordinates with
traditional and contemporary interiors.
• Fluid slide movement allows fine
adjustment of light level with minimal
effort.
• Captured, wrap-around slide bar stays in
place and cannot fall off during use.
• Preset push ON/OFF switch is universally
designed for easy action,
accommodating use by people of all
ages and abilities.
• Locator LED is illuminated when load is
OFF (600W is available without
illumination). Direct positioning of LED
on Preset switch makes it easy to find
switch in dark rooms.
• Locator light is positioned in same area
on both preset and non-preset versions,
adding to “family look” of devices.
• Preset versions provide single-pole (one
location) and 3-way (multi-location)
control when used with a standard 3way ON/OFF switch.
• Power failure recovery feature ensures
retention of last setting before power
interruption.
• Quiet 1.5 amp fan speed controls are
ideal for libraries, study rooms and areas
where ceiling fan noise may be
distracting. Full-range 5 amp fan speed
controls are also available.
• Built-in radio/TV interference filter.
3.28 (83.3 mm)
2.68 (68.1 mm)
0.38 (9.7 mm)
Cat. No. IPI06 Preset
2.12 (53.8 mm)
0.39 (9.9 mm)
2.68 (68.1 mm)
4.15 (105.4 mm)
1.26 (32.0 mm)
3.28 (83.3 mm)
FEATURES
1.41 (35.8 mm)
2.12 (53.8 mm)
1.11 (28.2 mm)
Cat. No. INI06 Non-Preset
• Use with Leviton DPSPE-112 Power Extender to extend load
capacity to 2000W (2000VA) for incandescent, magnetic lowvoltage and Advance Mark X™ fluorescent dimming ballasts.
• Use with Leviton DPSPE-212 Power Extender to extend load
capacity to 2000VA for Advance Mark VII™ and Motorola
Helios™ fluorescent ballasts.
• Compatible with Decora screwless and standard Decora
wallplates.
• Available in Ivory, White and Almond for the retail market and
distributors.
• Snap-on color change kits in ivory, white, almond, black,
brown and gray allow color changes on any device,
simplifying stocking inventory.
• Color change kits feature a self-aligning mechanism that
automatically connects to internal slider.
STANDARDS SPECIFICATIONS
Controls shall be UL Listed Leviton Multi-Location Preset Slide
Dimmer with Limited Two-Year Warranty, fluid slide movement,
captured wrap-around slidebar, failure recovery and Locator
LED that illuminates when load is OFF. Preset Version shall
have single-pole and 3-way wiring capability (when used with
3-way switch). Device shall have Color Change Kits for
economical color changeovers. Available in ratings and colors
as scheduled on plan.
Leviton Mfg. Co., Inc. 59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: (800) 824-3005 • Fax: (800) 832-9538
IllumaTech
Leviton’s new IllumaTech™ Lighting
Controls are Multi-Location Slide Dimmers
available in preset and non-preset
versions. IllumaTech dimmers feature a
smooth, captured slide-bar action for fine
adjustment of lighting levels. Preset
versions provide an easy-to-use
pushbutton ON/OFF switch with locator
LED. To simplify inventory, IllumaTech is
designed for both single-pole (onelocation) and 3-way (multi-location)
applications. Color change kits also
simplify inventory by diminishing the
need for stocking separate devices in
every color. The IllumaTech line includes
incandescent, magnetic low-voltage and
Mark X fluorescent lighting controls, as
well as full range and quiet fan-speed
controls.
4.15 (105.4 mm)
APPLICATION
Product
Specifications
IllumaTech
.........................
Performance Specifications
Electrical
• Input: 120 VAC @ 60Hz, 277 VAC @ 60Hz, 220 VAC @ 50Hz.
• Line voltage regulation.
• RFI noise suppression.
• Maximum load incandescent 1000 watts stand alone; 2000 watts with the use of a power extender.
Mechanical
• Dimmer control – slide with a travel of 25mm for non-preset version and 20mm for preset version.
• Push on/off switch control for preset models and slide-to-off for non-preset models.
• Three wire device plus ground wire for preset models and two wire plus ground for non-preset models.
• The led will be lighted when the load off.
• Separate air-gap switch is not needed.
Environmental
• Operating 0 degrees celsius to 55 degrees celsius
• Non-operating –10 degrees celsius to 85 degrees celsius
• Relative humidity, non-condensing 20% to 90%
ORDERING INFORMATION PRESET MODELS
Cat. No.
IPI06-10W
IPI06-1LW
IPI10-1LW
IPI06-2LW
IPI10-2LW
IPM06-1LW
IPM10-1LW
IPM06-2LW
IPX06-1LW
IPX10-1LW
IPX12-7LW
IPF05-1LW
IPF01-1LW
IPF01-2LW
IPKIT
IPQFK
Rating
600W, 120 VAC 60Hz
600W, 120 VAC 60Hz
1000W, 120 VAC 60Hz
600W, 220 VAC 50Hz
1000W, 220 VAC 50Hz
600VA, 120 VAC 60Hz
1000VA, 120 VAC 60Hz
600VA, 220 VAC 50Hz
600VA, 120 VAC 60Hz
1000VA, 120 VAC 60Hz
1200VA, 277 VAC 60Hz
5A Fan Speed, 120 VAC 60Hz
1.5A Quiet Fan Speed, 120 VAC 60Hz
1.5A Quiet Fan Speed, 220 VAC 50Hz
Color Change Kit
Color Change Kit for Quiet Fan
Speed Controls (Preset)
Description
Incandescent, no Locator LED
Incandescent, Locator LED
Incandescent, Locator LED
Incandescent, Locator LED (White only)
Incandescent, Locator LED (White only)
Magnetic Low-Voltage lighting, Locator LED
Magnetic Low-Voltage lighting, Locator LED
Magnetic Low-Voltage lighting, Locator LED (White only)
Advance Mark X/Philips Ecotron fluorescent dimming ballast
Advance Mark X/Philips Ecotron fluorescent dimming ballast
Advance Mark X/Philips Ecotron fluorescent dimming ballast
Fan Speed Control
Quiet Fan Speed Control
Quiet Fan Speed Control
White (-I), Ivory (-I), Almond (-A), Gray (-G), Black (-E), and Brown (-B)
White (-I), Ivory (-I), Almond (-A), Gray (-G), Black (-E), and Brown (-B)
ORDERING INFORMATION NON-PRESET MODELS (120 VAC 60Hz)
Cat. No.
INI06-10W
INI06-1LW
INM06-1LW
INI10-1LW
INM10-1LW
INF05-1LW
INF01-1LW
INKIT
Rating
600W
600W
600 VA
1000W
1000VA
5A Fan Speed
1.5 Q-Fan
Color Change Kit
INQFK
Color Change Kit for Quiet
Fan Speed Control (Non-Preset)
Description
Incandescent
Incandescent, Locator LED
Magnetic Low-Voltage Lighting, Locator LED
Incandescent, Locator LED
Magnetic Low-Voltage Lighting, Locator LED
5A Speed Control, Locator LED
Quiet Ceiling Fan Speed Control, Locator LED
White (-W), Ivory (-I), Almond (-A), Gray (-G),
Black (-E) and Brown (-B)
White (-W), Ivory (-I), Almond (-A), Gray (-G),
Black (-E) and Brown (-B)
Illumatech available in White (-W), Ivory (-I), Almond (-A).
Leviton’s Limited Two-Year Warranty
This warranty gives you specific rights, and you may also have other rights, which vary in different states and
countries. Leviton warrants to the original consumer purchaser that this product is free of defects in materials and
workmanship for 2 years from the purchase date. Leviton’s only obligation is to correct such defects by repair or
replacement, at its option, if within such 2 years the product is returned prepaid, with proof of purchase date, and a
description of the problem to the Leviton Manufacturing Co., Inc., ATTN: Quality Assurance Department, 59-25 Little
Neck Pkwy., Little Neck, NY 11362-2591. This warranty does not cover labor for removal or reinstallation of the
product and is void on any product installed improperly or in an improper environment, overloaded, misused,
opened, abused, or altered in any manner. There are no implied warranties of any kind, but if implied warranties are
required by the applicable jurisdiction, Leviton limits the duration of any implied warranty of fitness for use or
merchantability to 2 years. Leviton is not liable for incidental or consequential damages, including without limitation,
loss of equipment use and lost sales or profits for breach of any warranty on this product. Some jurisdictions may
not allow exclusion of or limitations on how long an implied warranty lasts or the exclusion or limitation of incidental
or consequential damages, so the above exclusions or limitations may not even apply to you.
Leviton Mfg. Co., Inc. 59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: (800) 824-3005 • Fax: (800) 832-9538
Copyright © 2000 Leviton Manufacturing Co., Inc. All Rights Reserved
C-553/C0-5M cb
C-0