Product Specifications IllumaTech ......................... IllumaTech™ Lighting Controls • UL Listed (File # E-31373) • CSA Certified (File # LR-3413) • Decora styling coordinates with traditional and contemporary interiors. • Fluid slide movement allows fine adjustment of light level with minimal effort. • Captured, wrap-around slide bar stays in place and cannot fall off during use. • Preset push ON/OFF switch is universally designed for easy action, accommodating use by people of all ages and abilities. • Locator LED is illuminated when load is OFF (600W is available without illumination). Direct positioning of LED on Preset switch makes it easy to find switch in dark rooms. • Locator light is positioned in same area on both preset and non-preset versions, adding to “family look” of devices. • Preset versions provide single-pole (one location) and 3-way (multi-location) control when used with a standard 3way ON/OFF switch. • Power failure recovery feature ensures retention of last setting before power interruption. • Quiet 1.5 amp fan speed controls are ideal for libraries, study rooms and areas where ceiling fan noise may be distracting. Full-range 5 amp fan speed controls are also available. • Built-in radio/TV interference filter. 3.28 (83.3 mm) 2.68 (68.1 mm) 0.38 (9.7 mm) Cat. No. IPI06 Preset 2.12 (53.8 mm) 0.39 (9.9 mm) 2.68 (68.1 mm) 4.15 (105.4 mm) 1.26 (32.0 mm) 3.28 (83.3 mm) FEATURES 1.41 (35.8 mm) 2.12 (53.8 mm) 1.11 (28.2 mm) Cat. No. INI06 Non-Preset • Use with Leviton DPSPE-112 Power Extender to extend load capacity to 2000W (2000VA) for incandescent, magnetic lowvoltage and Advance Mark X™ fluorescent dimming ballasts. • Use with Leviton DPSPE-212 Power Extender to extend load capacity to 2000VA for Advance Mark VII™ and Motorola Helios™ fluorescent ballasts. • Compatible with Decora screwless and standard Decora wallplates. • Available in ivory, white and almond for the retail market, white only for distributors. • Snap-on color change kits in ivory, white, almond, black, brown and gray allow color changes on any device, simplifying stocking inventory. • Color change kits feature a self-aligning mechanism that automatically connects to internal slider. STANDARDS SPECIFICATIONS Controls shall be UL Listed Leviton Multi-Location Preset Slide Dimmer with Limited Two-Year Warranty, fluid slide movement, captured wrap-around slidebar, failure recovery and Locator LED that illuminates when load is OFF. Preset Version shall have single-pole and 3-way wiring capability (when used with 3-way switch). Device shall have Color Change Kits for economical color changeovers. Available in ratings and colors as scheduled on plan. Leviton Mfg. Co., Inc. 59-25 Little Neck Pkwy • Little Neck, NY 11362 • Phone: (800) 323-8920 • Fax: (800) 832-9538 IllumaTech Leviton’s new IllumaTech™ Lighting Controls are Multi-Location Slide Dimmers available in preset and non-preset versions. IllumaTech dimmers feature a smooth, captured slide-bar action for fine adjustment of lighting levels. Preset versions provide an easy-to-use pushbutton ON/OFF switch with locator LED. To simplify inventory, IllumaTech is designed for both single-pole (onelocation) and 3-way (multi-location) applications. Color change kits also simplify inventory by diminishing the need for stocking separate devices in every color. The IllumaTech line includes incandescent, magnetic low-voltage and electronic fluorescent lighting controls, as well as full range and quiet fan-speed controls. 4.15 (105.4 mm) APPLICATION Product Specifications IllumaTech ......................... Performance Specifications Electrical • Input 120 VAC @ 60Hz. • Line voltage regulation. • RFI noise suppression. • Maximum load incandescent 1000 watts stand alone; 2000 watts with the use of a power extender. Mechanical • Dimmer control – slide with a travel of 25mm for non-preset version and 20mm for preset version. • Push on/off switch control for preset models and slide-to-off for non-preset models. • Three wire device plus ground wire for preset models and two wire plus ground for non-preset models. • The led will be lighted when the load off. • Separate air-gap switch is not needed. Environmental • Operating 0 degrees celsius to 55 degrees celsius • Non-operating –10 degrees celsius to 85 degrees celsius • Relative humidity, non-condensing 20% to 90% ORDERING INFORMATION PRESET MODELS Cat. No. IPI06-1LW IPI10-1LW IPM10-1LW IPE04-1LW IPX06-1LW IPF05-1LW IPF01-1LW IPKIT Rating 600W 1000W 1000VA 400VA ELV 600VA Mark X 5A Fan Speed 1.5 Q-Fan Color Change Kit IPQFK Color Change Kit for Quiet Fan Speed Control (Preset) Description Incandescent, Locator LED Incandescent, Locator LED Magnetic Low-Voltage Lighting, Locator LED Electronic Low-Voltage Lighting, Locator LED Mark X Electronic Fluorescent Lighting, Locator LED 5A Fan Speed Control Quiet Ceiling Fan Speed Control White (-W), Ivory (-I), Almond (-A), Gray (-G), Black (-E) and Brown (-B) White (-W), Ivory (-I), Almond (-A), Gray (-G), Black (-E) and Brown (-B) ORDERING INFORMATION NON-PRESET MODELS Cat. No. INI06-10W INI06-1LW INM06-1LW INI10-1LW INM10-1LW INF05-1LW INF01-1LW INKIT Rating 600W 600W 600 VA 1000W 1000VA 5A Fan Speed 1.5 Q-Fan Color Change Kit INQFK Color Change Kit for Quiet Fan Speed Control (Non-Preset) Description Incandescent Incandescent, Locator LED Magnetic Low-Voltage Lighting, Locator LED Incandescent, Locator LED Magnetic Low-Voltage Lighting, Locator LED 5A Speed Control, Locator LED Quiet Ceiling Fan Speed Control, Locator LED White (-W), Ivory (-I), Almond (-A), Gray (-G), Black (-E) and Brown (-B) White (-W), Ivory (-I), Almond (-A), Gray (-G), Black (-E) and Brown (-B) Illumatech available in White (-W), Ivory (-I), Almond (-A). Leviton’s Limited Two-Year Warranty This warranty gives you specific rights, and you may also have other rights, which vary in different states and countries. Leviton warrants to the original consumer purchaser that this product is free of defects in materials and workmanship for 2 years from the purchase date. Leviton’s only obligation is to correct such defects by repair or replacement, at its option, if within such 2 years the product is returned prepaid, with proof of purchase date, and a description of the problem to the Leviton Manufacturing Co., Inc., ATTN: Quality Assurance Department, 59-25 Little Neck Pkwy., Little Neck, NY 113622591. This warranty does not cover labor for removal or reinstallation of the product and is void on any product installed improperly or in an improper environment, overloaded, misused, opened, abused, or altered in any manner. There are no implied warranties of any kind, but if implied warranties are required by the applicable jurisdiction, Leviton limits the duration of any implied warranty of fitness for use or merchantability to 2 years. Leviton is not liable for incidental or consequential damages, including without limitation, loss of equipment use and lost sales or profits for breach of any warranty on this product. Some jurisdictions may not allow exclusion of or limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above exclusions or limitations may not even apply to you. Leviton Mfg. Co., Inc. 59-25 Little Neck Pkwy • Little Neck, NY 11362 • Phone: (800) 323-8920 • Fax: (800) 832-9538 Copyright © 1999 Leviton Manufacturing Co., Inc. All Rights Reserved C-528J/C9-5M rp