presented by
ACM10– Acenti® 1000W Incandescent / Magnetic Low-Voltage
Dimmer
Acenti® Switches
• Universal design provides quiet, crisp actuation,
minimal travel
• Push pad always returns to neutral position regardless
of load status,
for perfect alignment in multi-gang applications*
• Flawless multi-gang installation with no dividers
between devices*
• Soothing blue LED indicates load status and serves as
locator light
• Terminal screws (back- and side-wire) for easier
installation
1000W/VA, 120 Volt AC 60Hz, Single-Pole, 3-Way or More Applications, Acenti Preset Digital
Incandescent / Mag Low-Voltage Return to Neutral Dimmer, LED Locator and Brightness Display
PRODUCT FEATURES:
Switch Type: Single-Pole, 3-Way or More Applications
Style:
Acenti
Type:
Digital
Preset:
Preset
Load Type:
Incandescent / Mag Low-Voltage
Load Rating:
1000W/VA
Voltage:
120 Volt AC 60Hz
Light:
LED Locator and Brightness Display
LED Color:
Blue
Action:
Selectable Soft-ON/Fade-OFF
Protection:
RFI IEC Level 4 Surge & Fast Transient
Wallplate:
Order Separately
Standards and Certifications: UL/CSA
Warranty:
5 Year Limited
Available Colors: Alabaster-W, Onyx-E, Slate-G, Natural-A, Driftwood-D, Sand-S, Quartz-Q
Brand:
Leviton
FEATURES AND BENEFITS:
• Universal design provides quiet, crisp actuation, minimal travel
• Digital circuitry provides single-pole, 3-Way or multi-location dimming control
• Easy adjustments for minimum brightness level, dim lock and fade rate
• Efficient construction with consistent form factor, excellent ergonomic traits and precision feel
• Innovative contoured geometry offers an exclusive aesthetic design
• Flawless multi-gang installation with no dividers or frame between devices
• All visible surfaces molded from GE Valox 357 engineering-grade polymer for uniformity and
flawless color match
• Subtle, matte finish complements fine decor
• Push pad always returns to neutral position regardless of load status, for perfect alignment in
multi-gang applications
www.bellacor.com
page 1 of 4
presented by
•
•
•
Soothing Blue LED locator light illuminates when lights are OFF to help users locate control
in the dark
UL1472 and CSA C22.2 No. 184-M1988
Premium Grade with Five-Year Limited Warranty
Electrical Specifications
Dielectric Voltage Withstands 1500V for 1 minute
Overload UL20 Test 100 cycles of OL at 4.8 times rated current
Temperature Rise 60C Surface 75C Wiring
Endurance
10,000 cycles minimum
Mechanical Specifications
Terminal ID
Grn-Gnd Blk-Hot Red-Load Brass-Travlr Slvr-Neutral
Terminal Accom. 14-12 AWG
Product ID
Stamped on Strap
Torque Range 25 inch pounds maximim
Material Specifications
Face Material
Engineering Grade Polymer
Body Material
Polycarbonate
Contacts
N/A ON/OFF Air-Gap Switch
Terminal Screws
Steel 10-32
Ground Screw
Steel 10-32
Power Leads
14 AWG
Messenger or Travel Leads 18 AWG
Available Colors
Albstr-W Onyx-E Slate-G Nat-A Dfwd-D Sand-S Qrtz-Q
Environmental Specifications
Relative Humidity
Non-Condensing 20-90 percent
Operating Temperature 0C to 55C
Standards and Certifications
NEMA
WD-1 & WD-6
ANSI
Z1.4 or MIL STD 105
UL Standard UL 1472
UL Listed
File E31373
CSA Standard CSA C22.2 No. 184.1-96
CSA Certified File LR-3413
FCC Part 15 Class B for Residential Compliance
Performance Data
Protection RFI IEC Level 4 Surge & Fast Transient
www.bellacor.com
page 2 of 4
presented by
WIRING DIAGRAMS
www.bellacor.com
page 3 of 4
presented by
www.bellacor.com
page 4 of 4