PH75 | PH85 - Take Three Lighting

advertisement
PH75 | PH85
Round Downlight – Horizontal Lamp
7.5” | 8.5”
SPECIFICATIONS
FEATURES
•• Housing – 20-gauge, die-formed, galvanized steel
pan/plaster frame.
•• Reflector – Low-iridescent aluminum. Clear semispecular (CS) finish standard.
•• Electrical – Electronic ballast. Prewired at factory
for easy field installation.
•• Mounting – Recessed.
•• Labels – UL/CUL listed for through-branch circuit
wiring and dry or damp locations. UL/CUL listed for
wet location under covered ceiling when specified
with __/CGS, __/CPG, or __/FF option.
•• Self-flanged aluminum reflector prevents light
leaks and is available in assorted colors.
•• Sturdy one-piece pan construction.
•• Adjustable hanger brackets with bar hangers
standard.
•• Easy-access, 14-gauge galvanized steel junction
box with two snap-on covers.
•• This fixture is proudly made in the USA.
PH75 shown
EXAMPLE
PH75
t
SERIES
-
2 32T
t
-
CS
t
NUMBERWATTAGE/
OF LAMPS TYPE
-
OP TIONS
t
-
E B2
t
REFLECTOR
OPTIONS
FINISH
-
UNV
t
t
BALLAST
TYPE
VOLTAGE
DESCRIPTION
ORDERING INFORMATION
SERIES
PH75
PH85
OPTIONS (Continued)
AC/CGS 3 AC/CPG Accent cone with clear glass lens 3
Accent cone with clear prismatic
tempered glass lens
AC/FF 4 Accent cone with fresnel glass lens 4
MB/CGS 3 Micro-baffle with clear glass lens 3
MB/CPG Micro-baffle with clear prismatic
tempered glass lens
MB/FF 4 Micro-baffle with fresnel glass
lens 4
4
LD Luminous disk 4
LDO 4 Luminous disk open 4
LR 4 Luminous ring 4
PFS/__4 P erforated shield (must specify LD,
LDO, or LR option) 4
SCA__º
Sloped Ceiling Adapter (Specify
degree of slope in 5º increments,
10º - 30º. SCA increases fixture
height, see page 428 for details.)
2
RETRO Retrofit Mounting Pan Assembly
(see page 428 for details) 2
7.5” Round Downlight–Horizontal
Lamp
8.5” Round Downlight–Horizontal
Lamp
LAMP OPTIONS
See page 430 for lamp base data.
PH75 LAMP OPTIONS
# OF LAMPS
WATTAGE/TYPE
1 or 2
13Q, 18Q, 26Q, 26T, 32T, or 42T
PH85 LAMP OPTIONS
# OF LAMPS
WATTAGE/TYPE
1 or 2
18Q, 26Q, 32T, or 42T
18Q or 26Q1
31
REFLECTOR FINISH
See page 427 for trim options.
CS
Clear semi-specular (standard)
SPC
Clear specular
CG
Champagne gold
GD
Gold
PW
Pewter
SG
Satin-glow
STR
Straw
WT
Wheat
OPTIONS
For EM and EM/ITS ballast options (120V or 277V
only, must specify voltage), see page 429.2
See page 427 for lens/trim options.
F
Fuse (must specify voltage)
MWT
Matte white trim
MB
Micro-baffle
WW
Wall wash
(Not available with AC or MB)
2
YOKE Yoke-mount reflector2
CCEA 1 , 2 Chicago plenum (CP) 1 , 2
The horizontal lamp placement and
reflector design of the PH Series offers
a wider distribution with lower profile
for shallow plenums. Ideal for general
illumination at low to medium mounting
heights.
6-5/16”
ø7-3/8”
ø8-5/8”
PH75
7”
BALLAST TYPE
EB1
EB2
EB2/1
1-lamp electronic ballast
2-lamp electronic ballast
(1) 2-lamp and (1) 1-lamp
electronic ballast
EBD_*__ 5 E lectronic dimming ballast (120V or
277V only, must specify) 5
1
2
3
4
5
ø9-3/4”
PH85
Pan Size (Inches)
w/o SCA w/SCA
PH75 12 x 16-1/4 17 x 23
PH85 12 x 16-1/4 17 x 23
VOLTAGE (Must specify)
120
277
UNV
ø8-5/8”
Fixture
120V
277V
120-277V
CCEA is not available with 3-lamp PH85.
EM is not available with RETRO option. EM/ITS option is
not available with CCEA or YOKE options.
Acrylic or polycarbonate lens options also available.
Available for PH75 only.
Must specify lamp quantity, manufacturer, and voltage. See
page 429 for dimming ballast options.
Cutout Size
w/o SCA w/SCA
ø8-1/8”
ø10-5/8”
ø9-1/8”
ø12-1/2”
QUANTITY ESTIMATOR
Item # PH75-232T
Room Size
20’ x 20’ (400 sq. ft.)
30’ x 30’ (900 sq. ft.)
40’ x 40’ (1,600 sq. ft.)
± 50 fc.
6
16
25
± 75 fc. ± 100 fc.
9
16
20
30
42
56
Calculations based on standard reflectance of 80/50/20 and a light
loss factor of 1.0 with a 10’-0” ceiling height.
www.hewilliams.com
Information contained herein is subject to change without notice.
LGV31053.081913MP
Recessed Fluorescent |
273
Download