Job______________________________________________ Type_____________________________________________ Catalog # Application settings where lower energy costs and performance are of utmost concern. • Less expensive alternatives to Holophane 6100 and 7100 Series lenses. P19 lens pattern reduces glare and lamp image, creating a more diffused light. • Unique distribution of uplight out of lens sides helps to minimize cave effect and illuminate ceiling. • Row mounting requires a wiring nipple between fixtures and space left between fixtures. WC SERIES Construction • Ideal for schools and institutional A large cost savings can be real- • Die-formed code gauge cold rolled steel housing, rigidified for strength and uniformity. Ballast cover easily removed without tools. Knockouts on housing top. • White steel reflector. • One piece extruded 100% clear virgin acrylic prismatic lens. Prismatic pattern 19 on bottom exterior and linear prisms on interior sides. White acrylic snap-on end caps. Lens assembly hinges from either side with spring-loaded release latches. ized on the one lamp unit by using a single three lamp ballast for every 3 fixtures. Finish • All metal parts are pretreated with a phosphate bonding process and postpainted with an electrostatically-applied high temperature baked white enamel for superior quality and durability. ORDERING GUIDE Lmps Watts Fixt WC 1,2 14-14w T5 17-17w T8 24-24w T5HO ___________ 21-21w T5 25-25 wT8 39-39wT5 HO ___________ 28-28w T5 32-32w T8 54-54w T5HO 02 1,2 • Standard ballast is electronic, HPF, Class P and UL listed for universal voltage. Listed listed. • Suitable for damp locations. • I.B.E.W. Labeled. High Performance Wrap Channel Example: WC23248-EO9GH Series 1,2 Electrical 03 Options Ballast: 1 or 2 lamps: EO - One ballast 3+ lamps: EO - Two ballasts, wired inboard/ outboard 48 (or customer specified) CO - One ballast Specific Ballasts: HL – High Ballast Factor LW – Low Ballast Factor PSP – Program Start, Parallel Wiring Dimming: DL - Dimming, Lutron DA - Dimming, Advance DO - Dimming, Osram DU - Dimming, ULT (Specify vendor ’s product catalog decription) 1 - 120v 7 - 480v Voltage: 1 - 120v 7 - 480v 4 - 277v 8 - 347-480 5 - 347v 9- 120-277 Lens: GH - Clear acrylic pattern 19 with white 2G-20 Gauge CRS hsg. & ENDS. ALUM-Aluminum WR - White Reflector EAR – Enhanced Aluminum Reflector (95% reflectance) AAR – Anodized Aluminum Reflector (85% reflectance) standard WAR – White Aluminum Reflector (87% reflectance) Lamps: L835- Generic, 3500K L841-Generic, 4100K Emergency Ballasts: EM1- 1-lamp(500-600L) EM1A- 1-lamp(350-450L) EM2- 2-lamps(1100-1400L) EM2A- 2-lamps(600-700L) EM3- 1 lamp (600-700L) 2-hrs. Motion Sensors: MS9 - HB, LB Aisle appl., 120/277/347v,PIR, Low Temp. MS8 - HB appl., 480v, PIR, Low Temp, Photo Cell MS5 - HB appl., 120/277v, PIR, Low temp. end caps LUMAX INDUSTRIES, INC. Chestnut Avenue & Fourth Street Altoona, PA 16603-0991 814-944-2537 Fax 814-944-6413 www.lumaxlighting.com WC Series PHOTOMETRIC DATA Catalog Number: WC13248-EO9GH Lamps: One F32T8/TL841 32W T8 Rated at 2800 Lumens Total Luminaire Efficiency = 91.1% Zonal Lumen Summary RC RW 70% 0 105 1 95 2 87 3 80 4 73 5 67 6 62 7 57 8 52 9 48 10 44 Zone Lumens %Lamp 0-30 596 19.6 %Fixt 21.5 0-40 1046 34.3 37.7 0-60 1809 59.3 65.2 0-90 2315 75.9 83.4 Coefficients of Utilization - Zonal Cavity Method Effective Floor Reflectance 20% 80% 70% 50% 50% 30% 10% 70% 50% 30% 10% 50% 30% 10% 105 105 105 101 101 101 101 93 93 93 91 87 84 91 88 84 81 81 78 76 80 74 69 84 77 72 67 71 67 63 71 64 58 76 68 62 57 64 58 54 63 55 50 70 61 54 48 57 51 46 56 48 52 64 54 47 41 50 44 39 50 42 37 59 48 41 36 45 39 34 45 37 32 54 43 36 31 41 34 30 40 33 27 50 39 32 27 36 30 26 36 29 23 46 35 28 23 33 26 22 33 25 21 43 32 25 20 30 24 19 DIMENSIONS Specifications and dimensional data subject to change without notice. Number shown indicates mounting / knockouts diagram - see Options & Accessories section of catalog. LUMAX INDUSTRIES, INC. WC.0413