Nu-Lite News Fall 2012 Sign of the Times In the Spotlight Did you know we carry... A showcase of some of the best and brightest products available at Nu-Lite. Nu-Lite Stands Out Page 2 Discover new product lines we stock to better serve you. Page 5 Pages 3-5 Nu-Lite Conversion Saves Money, Energy and the Environment While Providing More Light Drop by Nu-Lite’s Harahan warehouse these days and you’ll see things in a whole new light, literally. “We decided to switch out the fixtures and lamps in our warehouse to save energy and provide better light in that workspace,” said Joe Impastato, General Manager, Nu-Lite. After evaluating all of the options, Nu-Lite decided to keep the same number of fixtures and the same lighting layout in order to minimize the scope of the project.. The retrofit took less than three days to complete (and was done while the warehouse continued operation). Fifty-two 400W metal halide high bay fixtures with a total consumption of 20,800W that produced an average of 32 to 33 foot candles were replaced with fifty-two fourfoot, three-lamp, 49W T5/HO fluorescent F-bay fixtures, with a total consumption of just 7,644W and average foot candle production of 33 to 35. The retrofit project affected 25,000 square feet of warehouse space and reduced energy comsumption by 63%. The overall ROI HARAHAN HARVEY 850 Edwards Ave. Harahan, LA 70123 Phone: 504.733.3300 Fax: 504.736.1617 Toll Free: 800.256.1603 1116 Mac Arthur Ave. Harvey, LA 70058 Phone: 504.348-2232 Fax: 504.348-2950 Phase B Before 108-amps After 67-amps Phase C Before 91-amps After 55-amps In addition to saving 127 amps overall, which in itself was important, the new fixtures and lamps freed up capacity in the building’s available service. Like most businesses, as it grew, Nu-Lite added additional electrical equipment to its panel. By reducing the amperage used for warehouse lighting, Nu-Lite freed up available service amperage for future electrical needs without having to spend thousands of dollars to increase the service size. recognized by Nu-Lite was Additionally, the warehouse seen right from the beginning. workers are happy with the Before replacing the lamps, the current flow at the lighting change, saying that the power panel was measured to lighting is “just better” now than it was before. create a baseline Finally, additional savings measurement. After the lamps and comfort were found in the were replaced, the current flow was re-measured. The results were: (Warehouse, Page 2) NEW ORLEANS MANDEVILLE 518 S. Broad St. New Orleans, LA 70119 Phone: 504.822.0751 Fax: 504.822.5287 Phase A Before 127-amps After 77-amps 780 Asbury Drive. Mandeville, LA 70471 Phone: 985.626.3408 Fax: 985.626.1782 SLIDELL HAMMOND 34601 Grantham College Rd. Slidell, LA 70460 Phone: 985.641.9370 Fax: 985.641.9934 2406 W. Church St. Hammond, LA 70401 Phone: 985.340-0381 Fax: 985.340-0386 Warehouse Continued from Page 1 lower heat levels generated by the new fixtures and lamps. The lower wattage resulted in lower temperatures in the warehouse, which provided a more pleasant environment for the workers. “We are a part of the lighting industry, and we believe in practicing what we preach,” said Impastato. “There are many energy- and cost-saving options available and any organization interested in lowering their lighting energy usage should be able to find a solution that fits their budget and performance needs.” To learn more about Nu-Lite’s energy efficiency product and service solutions, contact your Nu-Lite salesperson or your closest Nu-Lite branch. Branch Improvements Sign of the Times: Nu-Lite Stands Out You may have noticed that Nu-Lite is, well, more noticeable! We’ve got a new sign for our New Orleans branch and it makes us the center of attention, literally. The new three-sided sign, created by GraciHart Electric’s sign division, is designed to be visible from all directions—north, south, east and west—from its location on the corner of Tulane Avenue and South Broad Street. “Our building sits back from the street, and our previous sign was flat and affixed to the side,” said Joe Impastato, General Manager of Nu-Lite. “Customers would pass right by us, even when they were looking for us and had the street address, because the sign wasn’t always visible to passing cars.” Since 1985, GraciHart Electric in Metairie has provided commercial and residential electrical services throughout the greater New Orleans area . 2 Additionally, GraciHart operates a sign division, providing commercial signage services from design and manufacturing to delivery and installation for interior and exterior placement. The in-house team of graphic designers can create new designs, revamp customers’ current branding, or design to complement current branding specifications. The new sign is threedimensional, eye-catching, and is designed to be rugged enough to withstand even New Orleans’ extreme summer weather. If you haven’t seen our new sign yet, be sure to stop by our New Orleans location soon. Even if you’ve never been to our office before, you definitely can’t miss us now! Product Spotlight SuperSlick Elite® by Encore Wire Encore Wire’s SuperSlick Elite® is a great alternative that eliminates the need for lube! SuperSlick Elite® is available in sizes 8 AWG through 1000 KCMIL All sizes are rated gasoline and oil resistant II On 250 KCMIL and larger, sequential footage markings are located every foot for easy measuring For 1 AWG through 4/0 AWG sequential markings are located on master reels only unless otherwise specified 6 AWG and larger is Sunlight Resistant in all colors 1/0 AWG and larger are rated for cable tray use and comply with IEEE 1202/FT4 (70,000 Btu/ hr) flame test and ICEA T-29-20 (210,000 Btu/ hr) flame test Available in all COLORS. Simplify complex wiring jobs by eliminating phase tape, saving time and money. SuperSlick Elite® is available in THHN, XHHW, and USE-2. REDEFINING SPEED SuperSlick Elite’s new formula is slicker, cleaner, tougher, and faster to pull. AVOID THE MESS SuperSlick Elite® eliminates the need for additional lubricant. THE POWER OF TECHNOLOGY SuperSlick Elite® is slicker without the greasy feel; making it easier and safer to handle and install. WE DELIVER SuperSlick Elite®, along with all of our products, is backed by Encore Wire’s industry leading warranty and unmatched fill rates. Scan for additional information Contractor Select LED Troffer by Lithonia Lighting Lithonia’s Contractor Select LED Troffer is a highperformance optical system designed to deliver general ambient lighting for facilities such as schools, offices and hospitals. Its high-efficacy light engine delivers long life and excellent color, ensuring a highly efficient and sustainable lighting system. The troffer, available in 2x2 and 2x4 versions, is rated to deliver LM80 performance for 50,000 hours, and its LED accudrive™ driver delivers full-range dimming from 0-10V control signal. Scan for additional information UNITAP connectors for direct burial by Burndy BURNDY has expanded its UNITAP™ family of connectors to now include the BIBS-DB series, a comprehensive offering of direct burial, dual-rated secondary connectors conveniently joined multiple conductors for direct burial applications. The BIBS-DB series connectors are rubberinsulated and dual-rated for use in networks up to 600V. They can be used for any applications that require a water-tight or below-grade application. The connectors are insulated with the highest quality EPDM rubber and supplied with the oxide inhibitor already inside. BURNDY’s UNITAP BIBS-DB connectors are range taking and easy to install with no taping or heat shrink required. These new connectors meet UL486D, ANSI C119.1 as well as ANSI C119.4 standards. Scan for additional information 3 Product Spotlight 120 volt dimming capability. The RL4 lens provides uniform illumination and wet location listing, while the diecast construction makes any housing AIR-TITE™ certified for added HVAC savings and code compliance. Retrofit LED Module-Trim by Cooper Lighting Halo, by Cooper Lighting, recently introduced a retrofit LED Module-Trim for 4"aperture recessed down lights. Designed for use with compatible 4" housings (including the Halo H99, H995 series and All-Pro ET/ EI400 series), the RL4 with integral LED driver offers Combo Head™ Cushion Grip Screwdriver by IDEAL Different sizes of combination fasteners mean using different tools, right? Not anymore! IDEAL’s Combo Head™ Cushioned Grip Screwdriver is designed to fit snugly into multiple sizes of combo screws, eliminating the need to buy more tools. The Combo Head™ features the most touch points of any similar product on the market, so it minimizes cam-out and stripping. IDEAL’s Combo Head Screwdriver 35-204 fits virtually any fastener. The screwdriver's Combo Head tip is vapor-blasted and precision-machined to ensure full fastener engagement. Its cushioned grip maximizes comfort 4 and minimizes fatigue during prolonged use, while providing maximum turning power. Designed to accurately and securely fit most combination fasteners Easy-to-read FastFinder™ handle Cushioned-grip handle provides maximum comfort and grip Made in the U.S.A. Scan for additional information Product features include: Over 600 Lumens 3000ºK warm white light 13.7 Watts/46.7 Lumens per Watt 50,000 hours with 70% maintained lumens Flexible mounting with friction blades Rated for use in IC (insulated ceiling) housings High brightness, diffusing, optical quality lens Scan for additional information KwikWire Hanging System by Cooper B-Line The Cooper B-Line KwikWire Hanging System is a flexible replacement for jack chain or all threaded rod (ATR) for hanging fixtures and supports. The simple, timesaving solution is easy to install, is available in ready-touse kits and provides up to 50 percent time and costsavings. KwikWire products offer true tool-free height adjustment so they can be installed 50 percent faster than jack chain, threaded rod or hanger straps. The KwikWire Hanging System includes clamps and cut-tolength wire rope assemblies that are ideal for light fixtures, wire basket cable trays, air handling equipment, HVAC duct supports, sign/banner supports or bus ducts. It is available in many MTO configurations. B-Line’s KwikWire products are easy to install and are the most versatile suspension solution on the market. The innovative, cutto-length, flexible wire suspension systems can be quickly wrapped around beams, eliminating the need to saw, file or fix existing nuts or drill holes. Plus, they can safely secure loads of 25 to 150 lbs depending on the selected product. Scan for additional information Did you know we Carry... Lutron Wireless Controls? Lutron light control products range from individual dimmers to total light management systems that control building complexes such as the 52story New York Times Building in New York City, Lincoln Financial Field in Philadelphia (where the Philadelphia Eagles play) and the Orange County Convention Center in Orlando. As world-renowned as they are, Lutron light controls also keep people safe and comfortable in their homes with light controls installed everywhere from single-room apartments to the White House and Windsor Castle. If you’re looking for the same convenience, exceptional energy savings potential and ease of installation for a building project, Nu-Lite carries Lutron’s Radio Powr Svr™ wireless ceiling-mount occupancy/vacancy sensors. These battery-powered passive infrared sensors automatically control compatible dimming and switching devices via RF communication. The sensors detect the heat from people moving within the area to determine when the space is occupied, then transmit the appropriate commands to the devices to turn the lights on or off automatically. Also in stock are Pico Wireless Control and Mounting Accessories, a wireless control system that is flexible and easy-to-use and allows you to control Lutron wireless load control devices from anywhere in the space. It requires no external power or communications wiring and can be reconfigured as a handheld remote, wall-mount control, car visor control or table-top version. When your project calls for lighting control, energy efficiency, safety and ease of installation, think Lutron – the leader in lighting control systems for home and business applications. Harahan Inside and Counter Sales Team Nu-Lite Inside Sales Team (L-R) Harold Gauthreaux, Ralph Boudreaux, Jeff Pierre, Clyde DePhillips, Cathie Robin, David Lukinovich and Nolan Leger Harahan Counter Sales / Will Call Team (L-R) Ernie Brune, David Allemand (DA), Joe Dime, Nappy Naquin, Scott Brown and Randy Marse 5 Help Nu-Lite raise funds to support 2 local organizations— Susan G Komen & Breastoration Purchase of a minimum of $300 “in stock" material, on a single invoice, from our participating manufacturers and receive a "Put a Bounty on Breast Cancer" T-shirt and bracelet Additional shirts may be purchased for $10 and bracelets for $2 with all net proceeds going to the charities. Sept. 24th thru Oct. 26th www.nulite.com Fax: (504) 736-1617 (504) 733-3300 (800) 256-1603 Harahan, LA 70123 850 Edwards Ave. Nu-Lite Electrical