Compact Unit Heater
®
Class I, Divisions 1 and 2, Group D
Class I, Zones 1 and 2, Group IIA
American
Bureau of
Shipping
INDEECO’s COMPACT explosion-proof unit heater is
designed with both size and economy in mind. COMPACT
advantages and unique features include:
• Compact Size: This small design is only 13 inches wide, which
makes it ideal for applications where limited space is available.
• Low Cost: The COMPACT design offers the most economical
solution for heating small Class I, Group D hazardous areas.
It is a cost effective alternative to the use of explosion-proof
convection heaters.
Applications
•Chemical Storage/Handling
Areas
•Oil Platforms and Refineries
•Compressor Stations
•Sewage/Wastewater
Treatment Plants
• Marine and Offshore
•Spray Booths
• Redundant Overtemperature Protection: Primary and
secondary automatic reset thermal cutouts for additional
safety.
• Stainless Steel Construction: Provides superior corrosion
resistant protection. Optional Dirty Duty construction adds
polyester powder coating to all aluminum parts for use in
corrosive applications.
• Optional Marine Duty Construction: The COMPACT design
is ideal for shipboard use where size, weight and corrosion
resistant construction are critical.
Standard Construction Features
Heating Elements – Industrial grade, Type 304 stainless
steel finned tubular heating elements are manufactured by
INDEECO.
Terminal Enclosure – A NEMA 7, 9 cast aluminum enclosure with
a threaded bottom cover permits easy access to the built-in
controls from underneath the heater.
Housing – Round, 16-gauge stainless steel shroud.
Grilles – An adjustable stainless steel louvered outlet grille
directs airflow 45° up or down and a heavy gauge stainless
steel rear grille protects against accidental contact with the
fan blade.
Built-In Controls – Include primary and secondary automatic
reset overtemperature cutouts, controlling contactor, and a
time delay relay which keeps the fan running to cool the heating elements after they have been de-energized.
Fan Motor Assembly – Consists of a 120-volt, 1-phase 60
hertz motor fitted with an aluminum fan blade. The totally
enclosed motor is UL Listed for Class I, Group D applications
and includes permanently lubricated ball bearings and built-in
thermal overload protection. The motor is factory wired into
the enclosure to reduce field wiring, but requires a separate
120-volt power supply.
Stainless Steel Swivel Mounting Bracket – Supplied as standard with all COMPACT explosion-proof unit heaters. This
multi-purpose bracket can be used for either wall or ceiling
mounting.
14
www.indeeco.com
800-243-8162
Compact Unit Heater
Custom Options
Code
Option
M
Dirty Duty Corrosion
Resistant Construction
Marine Duty
Construction
Manual Reset Cutout
T
Adjustable Thermostat
C
CM
Availability
Code (2)
Description
Includes polyester powder coated fan blade, wiring conduit and fittings,
NEMA 4X, 7, 9 enclosure.
Dirty Duty Construction with manual reset thermal cutout. Meets U.S.
Coast Guard requirements per 46CFR-111.87 and is ABS Approved
Can be specified to replace secondary automatic cutout.
Factory installed and prewired to the control enclosure. Thermostat is
adjustable from 50° to 90°F (10° to 32°C) range.
C
C
C
C
(2) AS = Assembly Stock, C = Custom Assembly Stock heaters ordered with custom options are subject to longer delivery.
Dimensions, Airflows and Weights
KW
Ignition Temperature Code
Approximate Air Temperature Rise °F (°C)
Air Volume CFM
(cubic meters/hr)
Air Throw Feet (m)
Outlet Velocity FPM
(meters/min)
RPM
HP
Fan Blade Dia. Inch ( cm)
Net Lbs (kgs)
Airflow
Characteristics
Motor/Fan
Weight
3
T3
5
T2C
7
T2
10
T1
12
T1
9 (5)
15 (8)
22 (12)
31 (17)
37 (21)
1050
(1784)
25 (8)
1140
(348)
1725
1/6
1050
(1784)
25 (8)
1140
(348)
1725
1/6
1050
(1784)
25 (8)
1140
(348)
1725
1/6
12 (31)
96 (44)
1050
(1784)
25 (8)
1140
(348)
1725
1/6
1050
(1784)
25 (8)
1140
(348)
1725
1/6
Shipping Lbs (kgs)
110 (50)
CEILING
CEILING
8” Min
(20.3 cm)
120V Motor:
Control Wiring When
Optional Built-On
Thermostat is Used
5 ¾”
(14.6 cm)
Optional Built-On
Thermostat
1 ”
(3.3 cm)
Min
Swivel Bracket
(Ceiling Mounted)
16
WALL
5
9 ¼”
(48.9 cm)
AIRFLOW
20”
(50.8 cm)
8” Min
(20.3 cm)
4⅜”
(11.1 cm)
Min
120V Motor:
Control Wiring
When Optional
Built-On Thermostat is Used
18” Ref.
(45.7 cm)
Heater
Wiring
22”
(55.9 cm)
28 ¼”
(71.8 cm)
Max
13”
(33 cm)
Standard Wall and Ceiling Installation with Swivel Mounting Bracket
www.indeeco.com
800-243-8162
15
Compact Unit Heater
Class I, Divisions 1 and 2, Group D
Class I, Zones 1 and 2, Group IIA
COMPACT Unit Heater Listing
Ignition
Temperature
Code
°F (°C)
T3
392 (200)
KW
Volts
Phase
Heater
Amps
(1)
Catalog
Number
Availability
Code (2)
208
240
480
208
240
480
600
208
240
480
208
240
480
600
208
240
480
208
240
480
1
1
1
3
3
3
3
1
1
1
3
3
3
3
1
1
1
3
3
3
14.5
12.5
6.3
8.4
7.3
3.7
2.9
24.1
20.9
10.5
13.9
12.1
8.1
4.9
33.7
29.2
14.6
19.5
16.9
8.5
236-F01T-0037C-7000
236-F01T-0037J-7001
236-F01T-0037T-7002
236-F01T-0037D-7003
236-F01T-0037K-7004
236-F01T-0037U-7005
236-F01T-0037Z-7006
236-F01T-0055C-7007
236-F01T-0055J-7008
236-F01T-0055T-7009
236-F01T-0055D-7010
236-F01T-0055K-7011
236-F01T-0055U-7012
236-F01T-0055Z-7013
236-F01T-0072C-7021
236-F01T-0072J-7022
236-F01T-0072T-7023
236-F01T-0072D-7024
236-F01T-0072K-7025
236-F01T-0072U-7026
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
600
3
6.8
236-F01T-0072Z-7027
C
240
480
208
240
480
600
480
240
480
600
1
1
3
3
3
3
1
3
3
3
41.7
20.9
27.8
24.1
12.1
9.7
25.0
29.0
14.5
11.6
236-F01T-0101J-7035
236-F01T-0101T-7036
236-F01T-0101D-7037
236-F01T-0101K-7038
236-F01T-0101U-7039
236-F01T-0101Z-7040
236-F01T-0121T-7041
236-F01T-0121K-7042
236-F01T-0121U-7043
236-F01T-0121Z-7044
C
C
C
C
C
C
C
C
C
C
3
T2C
446 (230)
5
T2
572 (300)
7
T1
842 (450)
10
T1
842 (450)
12
®
American
Bureau of
Shipping
(1) The amps shown are for the heating elements only. The 120V, 1 Ph 60 Hz motor draws 3.8 amps and requires a separate 120V power supply.
(2) Availability Code: C = Custom
Accessory Remote Thermostat
16
Catalog
Number
Switch Type
Description
Type
1007002
Bimetal
Class 1, Div. 1, Groups C & D
Class II, Div. 1, Groups E, F, & G
SPDT
1024754
Bulb and Capillary with
Internal Set Point Adjustment
Class 1, Div. 1, Groups B, C & D
Class II, Div. 1, Groups E, F, & G
SPDT
1025396
Bulb and Capillary with
Internal Set Point Adjustment
Corrosion-Resistant Class 1, Div. 1,
Groups B, C, & D
Class II, Div. 1, Groups E, F & G
SPST
Ratings
125-277V,
22A
120-240V,
25A
277V, 22A
120-240V,
25A
277V, 22A
Temp.
Range
0F (0C)
500-900
(100-320)
400-1200
400-1200
Availability
Code
AS