valid from 01.01.2013
Catalogue-No.11-3450L
This machine is overhauled. available: 1 unit
The rolls are new coated and the belts are as good as new.
Incl.high pressure pump for belt cleaning.
With discharge screw conveyor
Year of Construction: 1986
Capacity: 8-15 ton/h
Belt Width: 1,5 m
Weight: 6,5 ton
All prices are valid Ex-Works, excl.VAT
Subject to prior sale
Delivery: from D-97753-Karlstadt-Karlburg
Freight Charges: depending on dimensions and destination
Please visit our Web Site: www.eurolux-ag.com
EURO lux GmbH Sitz der Gesellschaft: Würzburg Sparkasse Mainfranken Würzburg
Industriegebiet-Hessheimer Weg 3-7
•
Registergericht: Amtsgericht Würzburg
D-97753 Karlstadt-Karlburg (b.Würzburg) HRB Nr. 4983
•
BLZ 790 500 00
Geschäftsführung: Paul Lamprecht Konto-Nr. 190 012 336
Tel. +49 (0) 93 53 – 9 09 05 – 0 Gerichtsstand: Würzburg S.W.I.F.T-Code BY LA DE M1 SWU
Fax. +49 (0) 93 53 – 9 09 05 – 22 Ust-IdNr. DE 811 655 121 IBAN DE 56 7905 0000 0190 0123 36 info@eurolux.de
www.eurolux-ag.com

valid from 01.01.2010
- NEW
Catalogue-no. 10-1030L available: 1 unit
Continuously operating system for the production of fruit juice from apple mash and other mashes with an integrated reextraction of the pomace for an increased yield.
Description:
The APEX 2500 is a pressing station for the production of fruit juice. In order to achieve especially high yields, the APEX 2500 features an integrated re-extraction system for the pomace, where the pomace is washed with water during the pressing process.
The re-extraction takes place directly in the press according to the counter-current principle. The extraction can be switched on or off, without changing the hourly output of the press.
The amount of water used for re-extraction can be adjusted to meet different requirements, in order to, for example, process different kinds of fruit with minimal dilution of the juice and maximum yield. To achieve this up to 6 counter-current extraction levels as well as up to 3 water injectors are available.
A juice outlet underneath each pressing roller allows for separate draining of juice. Thus it is possible to separately drain preextracted juice and extracted juice.
The press features a vertical structure. The mash is fed into the press at the bottom end and is then transported upwards..
Thus, at a height of about 5m, the pomace either falls onto a horizontal screw conveyor or into a container via a slide plate.
An optimum adjustment of the consecutive pressing rollers’ diameters guarantees a gentle pressing and makes sure that no mash is pressed out at the sides. Thus high yield and high juice quality can be ensured.
Technical details:
A first big roller slowly increases the pressure thereby allowing for a gentle extraction even of mash that is difficult to press.
The mash is distributed continuously via a feeding roller. Therefore the press is continuously fed and a high level of efficiency is achieved.
The press belts are manufactured from a special polyester fiber. Their robustness ensures long durability.
The tension of the press belts and the regulation of the belts are controlled pneumatically. Hydraulic oil, which could seep into the juice, is not required.
The belt's drive is regulated evenly via an electronic rotations and torque controller which ensures that the power is evenly and gently distributed to both belts.
Rotating brushes give the belts an initial cleaning. Then the press belts are cleaned by 2 high pressure injectors that are moved crossways across the belts in straight lines.
Because of the high pressure (approx. 100 bars) water consumption is very low (approx. 2000 liters) and cleaning results are excellent. The housing of the cleaning injectors is enclosed completely and features good accessibility via large, hinged openings. Water still clinging to the belts is removed by brush arrangements.
The juice drained from the press can be filtered via an additional juice pre-purification device.
Because of optimum design details and good accessibility the press can be cleaned quickly and easily. The casing and/or enclosures of the belt cleaning devices are easy to access and to open and even removable if necessary.
EURO lux Vertriebsgesellschaft mbH Sitz der Gesellschaft: Würzburg Sparkasse Mainfranken Würzburg
Hessheimer Weg 3-5
•
D-97753 Karlstadt-Karlburg Registergericht: Amtsgericht Würzburg
(b.Würzburg)
Tel. +49 (0) 93 53 – 9 09 05 – 0
HRB Nr. 4983
•
BLZ 790 500 00
Geschäftsführung: Paul Lamprecht Konto-Nr. 190 012 336
Gerichtsstand: Würzburg S.W.I.F.T-Code BY LA DE M1 SWU
Fax. +49 (0) 93 53 – 9 09 05 – 22 Ust-IdNr. DE 811 655 121 IBAN DE 56 7905 0000 0190 0123 36

Technical description:
Dimensions:
Belt width:
Dimensions:
Weight:
Capacity:
Year of Construction:
Motor brushes:
Belt drive:
High pressure pump:
Power supply/consumption
Electric energy
Installed output:
Consumption:
Min. air pressure:
Air consumption:
Main parts of the press
2,500 mm
6,650 x 5,150 x 5,650 mm approx. 16 tons
20-25 ton/h
2007
3.0 kW per brush
4.0 kW per drive
11.0 kW
3 x 380V, 50Hz
(complete pressing station) 16 kW
7 bars
80 l/min
(complete pressing station) 20 kW
Frame
Machine frame made from heavy, stainless-steel rectangular tubes with adjustable bed-plates.
Mash inlet
Large feeding hopper with min./max. probes. Adjustable mash feeding roller for different thickness levels of the mash cake.
Press belts
2 filter belts made from food-safe polyester fibers. The belt ends are connected by pin seams.
Press rollers
12 pressing rollers, of which:
1 perforated roller made of stainless steel,
9 pressing rollers with RILSAN coating,
2 drive rollers with PU coating,
12 guide rollers with RILSAN coating,
All rollers run on labyrinth sealed bearings.
Product guidance
Underneath each pressing roller there are collecting trays for the juice or extraction plates made of stainless steel. The main collecting tray with an open drain without valves or pumps is located under the first extraction roller. Dosage of extraction water with flow meter and regulating valve
Pneumatics
4 pneumatic cylinders for belt tension
2 pneumatic cylinders for belt regulation
2 pneumatic control valves for the regulation of the belt drive
1 stainless-steel control box for the pneumatic system, attached to the press
All cylinders feature an additional plastic coating for optimum protection from corrosion.
Belt drive
Electronics
2 drive engines with reduction gearbox and 4.0 kW each
1 electronic rotations and torque controller, integrated into the control box.
Maximum input 1.0 kW
Belt cleaning with rotating brushes
Pomace grater with polyamide grating blades
Then 2 rotating brush rollers with
2 drive engines with 3.0 kW each
EURO lux Vertriebsgesellschaft mbH Sitz der Gesellschaft: Würzburg Sparkasse Mainfranken Würzburg
Hessheimer Weg 3-5
•
D-97753 Karlstadt-Karlburg Registergericht: Amtsgericht Würzburg
(b.Würzburg)
Tel. +49 (0) 93 53 – 9 09 05 – 0
HRB Nr. 4983
•
BLZ 790 500 00
Geschäftsführung: Paul Lamprecht Konto-Nr. 190 012 336
Gerichtsstand: Würzburg S.W.I.F.T-Code BY LA DE M1 SWU
Fax. +49 (0) 93 53 – 9 09 05 – 22 Ust-IdNr. DE 811 655 121 IBAN DE 56 7905 0000 0190 0123 36

Belt cleaning with high-pressure water jet
High pressure cleaning of the press belts with 2 high pressure injectors that are moved crossways across the belts in straight lines.
Pressure approx. 100 bars
Water consumption approx. 3000 liters/h
Completely enclosed; large, hinged openings
2 gear engines with 0.25 kW each
All drive elements made completely from stainless steel and plastic
1 high pressure pump 11 kW
With pump feed tank with inflow regulator and protection against dry running
Operating platform
Operating walkways around the press with stainless-steel handrails
Electric control
Electric wiring within the press
Stainless-steel conduit box
Connection cable with multi-polar plug, design according to EEC/I/DE
1 electronic control box
Operational voltage 3 x 380V, 50 Hz
Control voltage 24 V/DC
The control box contains all drives and controls for the engines mentioned above. The control is designed in such a way that an automatic operation of the press is ensured.
All prices valid EX WORKS, excl. VAT
Delivery: From 97753 Karlstadt-Karlburg
Ref
Visit our website: www.eurolux-ag.com
Instruction manual available
Freight charges: depending on delivery contents
Subject to prior sale
EURO lux Vertriebsgesellschaft mbH Sitz der Gesellschaft: Würzburg Sparkasse Mainfranken Würzburg
Hessheimer Weg 3-5
•
D-97753 Karlstadt-Karlburg Registergericht: Amtsgericht Würzburg
(b.Würzburg)
Tel. +49 (0) 93 53 – 9 09 05 – 0
HRB Nr. 4983
•
BLZ 790 500 00
Geschäftsführung: Paul Lamprecht Konto-Nr. 190 012 336
Gerichtsstand: Würzburg S.W.I.F.T-Code BY LA DE M1 SWU
Fax. +49 (0) 93 53 – 9 09 05 – 22 Ust-IdNr. DE 811 655 121 IBAN DE 56 7905 0000 0190 0123 36

valid from 01.01.2013
Catalogue-No 13-0234L available: 1 unit
The advantages of the APEX Pressing station are universal application for several kind of fruits, we have experience with
•
Apples, Pears, Grape juice, Cherries, Strawberries, Red currants
High yield even with stored fruit
Instruction Manual Available Counter – current extraction can be switched on or off
Technical Data:
Year of built:
Capacity
Length
Width
Height
Weight
Width of belt
Speed of belt
Air pressure min
Air pressure max
Belt tension min
Belt tension max
Air consumption ( free of water, oil, dust )
Water consumption for belt cleaning
“Leaching water in % of mash “
Electric connection
Belt drive
Brush drive
Cleaning water backflow pump
Motor of Belt cleaning
240 / 400 V
240 / 400 V
240 / 400 V
240 / 400 V
1994
14 t / h
6646 mm
4110 mm
5630 mm
8000 kg
1500 mm
0-11 m/min
>4 bar
8 bar
4 bar
6 bar
2 m³ / h
1800 l / h
0-20 %
11,5 kW
2x 2,2 kW
2x 0,55 kW
2x 0,25 kW
EURO lux Vertriebsgesellschaft mbH Sitz der Gesellschaft: Würzburg Sparkasse Mainfranken Würzburg
Hessheimer Weg 3-5
•
D-97753 Karlstadt-Karlburg Registergericht: Amtsgericht Würzburg
(b.Würzburg)
Tel. +49 (0) 93 53 – 9 09 05 – 0
HRB Nr. 4983
•
BLZ 790 500 00
Geschäftsführung: Paul Lamprecht Konto-Nr. 190 012 336
Gerichtsstand: Würzburg S.W.I.F.T-Code BY LA DE M1 SWU
Fax. +49 (0) 93 53 – 9 09 05 – 22 Ust-IdNr. DE 811 655 121 IBAN DE 56 7905 0000 0190 0123 36

Description of the pressing station
The belt press APEX 1500 is a continuous pressing system for the production of fruit juice.
By adding water directly in the press, the extraction of pomace takes place at the same moment. The aim is to get the remaining sellable matter, especially sugar, in the pomace, allowing to increase the yield.
The press is either directly fed the mill or the mash is fed into the feeding hopper, via a variable pump. Thanks to a quick regulation it is possible to adjust the optimum thickness of the mash cake.
A first very big roller increases slowly the pressure and allows a quick and extensive deducing.
A total of 12 rollers ensures an optimal big pressing surface of 12 m², enabling to reach a yield up to 85 – 88 kg juice.
The vertical construction of the press allows a multi – step counter – current extraction, i.e. water is given to the pomace cake from the end press roller.
The water is aspirated by pomace and dissolves the remaining sugar.
In the end pressing zone, the pomace is pressed out, so that there is, according to mash condition, as less humidity left as possible.
Because of the pomace outlet, being at the top, the pomace can be conveyed horizontally by a screw.
The belt cleaning device takes care of a proper cleaning of the belt. By means of a continuous an constant high pressure belt cleaning, no cleaning breaks are necessary.
To reduce water consumption to the minimum level, the water for belt cleaning is recycled and screened by relative screen.
The water required for the extraction is taken from the circulating water which has three advantage:
• the sugar dissolved in the cleaning water foes into the juice
• the water taken for the extraction is replaced by fresh water so that the cleaning water is replaced
• the water consumption is reduced to the water quantity used for extraction.
The pressed juice is fed onto a vibratory screen. There, particles are removed and returned to the mash feed by a pump.
Price are valid Ex-Works, excl.VAT
Subject to prior sale
Delivery: from D-97753 Karlstadt-Karlburg
Freight Charges: depending on dimensions and destination
Please visit our Web-Site: www.eurolux-ag.com
EURO lux Vertriebsgesellschaft mbH Sitz der Gesellschaft: Würzburg Sparkasse Mainfranken Würzburg
Hessheimer Weg 3-5
•
D-97753 Karlstadt-Karlburg Registergericht: Amtsgericht Würzburg
(b.Würzburg)
Tel. +49 (0) 93 53 – 9 09 05 – 0
HRB Nr. 4983
•
BLZ 790 500 00
Geschäftsführung: Paul Lamprecht Konto-Nr. 190 012 336
Gerichtsstand: Würzburg S.W.I.F.T-Code BY LA DE M1 SWU
Fax. +49 (0) 93 53 – 9 09 05 – 22 Ust-IdNr. DE 811 655 121 IBAN DE 56 7905 0000 0190 0123 36

valid from 01.01.2013
Catalogue-No 13-0233L available: 1 unit
The advantages of the APEX Pressing station are universal application for several kind of fruits, we have experience with
•
Apples, Pears, Grape juice, Cherries, Strawberries, Red currants
High yield even with stored fruit
Instruction Manual Available Counter – current extraction can be switched on or off
Technical Data:
Year of built:
Capacity
Length
Width
Height
Weight
Width of belt
Speed of belt
Air pressure min
Air pressure max
Belt tension min
Belt tension max
Air consumption ( free of water, oil, dust )
Water consumption for belt cleaning
“Leaching water in % of mash “
Electric connection
Belt drive
Brush drive
Cleaning water backflow pump
Motor of Belt cleaning
240 / 400 V
240 / 400 V
240 / 400 V
240 / 400 V
1991
14 t / h
6646 mm
4110 mm
5630 mm
8000 kg
1500 mm
0-11 m/min
>4 bar
8 bar
4 bar
6 bar
2 m³ / h
1800 l / h
0-20 %
11,5 kW
2x 2,2 kW
2x 0,55 kW
2x 0,25 kW
EURO lux Vertriebsgesellschaft mbH Sitz der Gesellschaft: Würzburg Sparkasse Mainfranken Würzburg
Hessheimer Weg 3-5
•
D-97753 Karlstadt-Karlburg Registergericht: Amtsgericht Würzburg
(b.Würzburg)
Tel. +49 (0) 93 53 – 9 09 05 – 0
HRB Nr. 4983
•
BLZ 790 500 00
Geschäftsführung: Paul Lamprecht Konto-Nr. 190 012 336
Gerichtsstand: Würzburg S.W.I.F.T-Code BY LA DE M1 SWU
Fax. +49 (0) 93 53 – 9 09 05 – 22 Ust-IdNr. DE 811 655 121 IBAN DE 56 7905 0000 0190 0123 36

Description of the pressing station
The belt press APEX 1500 is a continuous pressing system for the production of fruit juice.
By adding water directly in the press, the extraction of pomace takes place at the same moment. The aim is to get the remaining sellable matter, especially sugar, in the pomace, allowing to increase the yield.
The press is either directly fed the mill or the mash is fed into the feeding hopper, via a variable pump. Thanks to a quick regulation it is possible to adjust the optimum thickness of the mash cake.
A first very big roller increases slowly the pressure and allows a quick and extensive deducing.
A total of 12 rollers ensures an optimal big pressing surface of 12 m², enabling to reach a yield up to 85 – 88 kg juice.
The vertical construction of the press allows a multi – step counter – current extraction, i.e. water is given to the pomace cake from the end press roller.
The water is aspirated by pomace and dissolves the remaining sugar.
In the end pressing zone, the pomace is pressed out, so that there is, according to mash condition, as less humidity left as possible.
Because of the pomace outlet, being at the top, the pomace can be conveyed horizontally by a screw.
The belt cleaning device takes care of a proper cleaning of the belt. By means of a continuous an constant high pressure belt cleaning, no cleaning breaks are necessary.
To reduce water consumption to the minimum level, the water for belt cleaning is recycled and screened by relative screen.
The water required for the extraction is taken from the circulating water which has three advantage:
• the sugar dissolved in the cleaning water foes into the juice
• the water taken for the extraction is replaced by fresh water so that the cleaning water is replaced
• the water consumption is reduced to the water quantity used for extraction.
The pressed juice is fed onto a vibratory screen. There, particles are removed and returned to the mash feed by a pump.
Price are valid Ex-Works, excl.VAT
Subject to prior sale
Delivery: from D-97753 Karlstadt-Karlburg
Freight Charges: depending on dimensions and destination
Please visit our Web-Site: www.eurolux-ag.com
EURO lux Vertriebsgesellschaft mbH Sitz der Gesellschaft: Würzburg Sparkasse Mainfranken Würzburg
Hessheimer Weg 3-5
•
D-97753 Karlstadt-Karlburg Registergericht: Amtsgericht Würzburg
(b.Würzburg)
Tel. +49 (0) 93 53 – 9 09 05 – 0
HRB Nr. 4983
•
BLZ 790 500 00
Geschäftsführung: Paul Lamprecht Konto-Nr. 190 012 336
Gerichtsstand: Würzburg S.W.I.F.T-Code BY LA DE M1 SWU
Fax. +49 (0) 93 53 – 9 09 05 – 22 Ust-IdNr. DE 811 655 121 IBAN DE 56 7905 0000 0190 0123 36

valid from 01.01.2009
Catalogue-Nr 09-2060L available: 1 unit
The advantages of the APEX Pressing station are universal application for several kind of fruits, we have experience with
•
Apples, Pears, Grape juice, Cherries, Strawberries, Red currants
High yield even with stored fruit
Instruction Manual Available Counter – current extraction can be switched on or off
Technical Data:
Capacity
Length
Width
Height
Weight
Width of belt
Speed of belt
Air pressure min
Air pressure max
Belt tension min
Belt tension max
Air consumption ( free of water, oil, dust )
Water consumption for belt cleaning
“Leaching water in % of mash “
Electric connection
Belt drive
Brush drive
Cleaning water backflow pump
Motor of Belt cleaning
240 / 400 V
240 / 400 V
240 / 400 V
240 / 400 V
14 t / h
6646 mm
4110 mm
5630 mm
8000 kg
1500 mm
0-11 m/min
>4 bar
8 bar
4 bar
6 bar
2 m³ / h
1800 l / h
0-20 %
11,5 kW
2x 2,2 kW
2x 0,55 kW
2x 0,25 kW
EURO lux Vertriebsgesellschaft mbH Sitz der Gesellschaft: Würzburg Sparkasse Mainfranken Würzburg
Hessheimer Weg 3-5
•
D-97753 Karlstadt-Karlburg Registergericht: Amtsgericht Würzburg
(b.Würzburg)
Tel. +49 (0) 93 53 – 9 09 05 – 0
HRB Nr. 4983
•
BLZ 790 500 00
Geschäftsführung: Paul Lamprecht Konto-Nr. 190 012 336
Gerichtsstand: Würzburg S.W.I.F.T-Code BY LA DE M1 SWU
Fax. +49 (0) 93 53 – 9 09 05 – 22 Ust-IdNr. DE 811 655 121 IBAN DE 56 7905 0000 0190 0123 36

Description of the pressing station
The Eurolux belt press APEX 1600 is a continuous pressing system for the production of fruit juice.
By adding water directly in the press, the extraction of pomace takes place at the same moment. The aim is to get the remaining sellable matter, especially sugar, in the pomace, allowing to increase the yield.
The press is either directly fed the mill or the mash is fed into the feeding hopper, via a variable pump. Thanks to a quick regulation it is possible to adjust the optimum thickness of the mash cake.
A first very big roller increases slowly the pressure and allows a quick and extensive deducing.
A total of 12 rollers ensures an optimal big pressing surface of 12 m², enabling to reach a yield up to 85 – 88 kg juice.
The vertical construction of the press allows a multi – step counter – current extraction, i.e. water is given to the pomace cake from the end press roller.
The water is aspirated by pomace and dissolves the remaining sugar.
In the end pressing zone, the pomace is pressed out, so that there is, according to mash condition, as less humidity left as possible.
Because of the pomace outlet, being at the top, the pomace can be conveyed horizontally by a screw.
The belt cleaning device takes care of a proper cleaning of the belt. By means of a continuous an constant high pressure belt cleaning, no cleaning breaks are necessary.
To reduce water consumption to the minimum level, the water for belt cleaning is recycled and screened by relative screen.
The water required for the extraction is taken from the circulating water which has three advantage:
• the sugar dissolved in the cleaning water foes into the juice
• the water taken for the extraction is replaced by fresh water so that the cleaning water is replaced
• the water consumption is reduced to the water quantity used for extraction.
The pressed juice is fed onto a vibratory screen. There, particles are removed and returned to the mash feed by a pump.
All prices are valid Ex-Works, excl.VAT.
Freight Charges: depending on dimensions and destination
Delivery: from 97753 Karlstadt-Karlburg
Subject to prior sale
Ref
Visit our Web-Site under: www.eurolux-ag.com
EURO lux Vertriebsgesellschaft mbH Sitz der Gesellschaft: Würzburg Sparkasse Mainfranken Würzburg
Hessheimer Weg 3-5
•
D-97753 Karlstadt-Karlburg Registergericht: Amtsgericht Würzburg
(b.Würzburg)
Tel. +49 (0) 93 53 – 9 09 05 – 0
HRB Nr. 4983
•
BLZ 790 500 00
Geschäftsführung: Paul Lamprecht Konto-Nr. 190 012 336
Gerichtsstand: Würzburg S.W.I.F.T-Code BY LA DE M1 SWU
Fax. +49 (0) 93 53 – 9 09 05 – 22 Ust-IdNr. DE 811 655 121 IBAN DE 56 7905 0000 0190 0123 36

valid from 01.01.2009
Catalogue-Nr 09-2070L available: 1 unit
The advantages of the APEX Pressing station are universal application for several kind of fruits, we have experience with
•
Apples, Pears, Grape juice, Cherries, Strawberries, Red currants
High yield even with stored fruit
Instruction Manual Available Counter – current extraction can be switched on or off
Technical Data:
Capacity
Length
Width
Height
Weight
Width of belt
Speed of belt
Air pressure min
Air pressure max
Belt tension min
Belt tension max
Air consumption ( free of water, oil, dust )
Water consumption for belt cleaning
“Leaching water in % of mash “
Electric connection
Belt drive
Brush drive
Cleaning water backflow pump
Motor of Belt cleaning
240 / 400 V
240 / 400 V
240 / 400 V
240 / 400 V
14 t / h
6646 mm
4110 mm
5630 mm
8000 kg
1500 mm
0-11 m/min
>4 bar
8 bar
4 bar
6 bar
2 m³ / h
1800 l / h
0-20 %
11,5 kW
2x 2,2 kW
2x 0,55 kW
2x 0,25 kW
EURO lux Vertriebsgesellschaft mbH Sitz der Gesellschaft: Würzburg Sparkasse Mainfranken Würzburg
Hessheimer Weg 3-5
•
D-97753 Karlstadt-Karlburg Registergericht: Amtsgericht Würzburg
(b.Würzburg)
Tel. +49 (0) 93 53 – 9 09 05 – 0
HRB Nr. 4983
•
BLZ 790 500 00
Geschäftsführung: Paul Lamprecht Konto-Nr. 190 012 336
Gerichtsstand: Würzburg S.W.I.F.T-Code BY LA DE M1 SWU
Fax. +49 (0) 93 53 – 9 09 05 – 22 Ust-IdNr. DE 811 655 121 IBAN DE 56 7905 0000 0190 0123 36

Description of the pressing station
The Eurolux belt press APEX 1500 is a continuous pressing system for the production of fruit juice.
By adding water directly in the press, the extraction of pomace takes place at the same moment. The aim is to get the remaining sellable matter, especially sugar, in the pomace, allowing to increase the yield.
The press is either directly fed the mill or the mash is fed into the feeding hopper, via a variable pump. Thanks to a quick regulation it is possible to adjust the optimum thickness of the mash cake.
A first very big roller increases slowly the pressure and allows a quick and extensive deducing.
A total of 12 rollers ensures an optimal big pressing surface of 12 m², enabling to reach a yield up to 85 – 88 kg juice.
The vertical construction of the press allows a multi – step counter – current extraction, i.e. water is given to the pomace cake from the end press roller.
The water is aspirated by pomace and dissolves the remaining sugar.
In the end pressing zone, the pomace is pressed out, so that there is, according to mash condition, as less humidity left as possible.
Because of the pomace outlet, being at the top, the pomace can be conveyed horizontally by a screw.
The belt cleaning device takes care of a proper cleaning of the belt. By means of a continuous an constant high pressure belt cleaning, no cleaning breaks are necessary.
To reduce water consumption to the minimum level, the water for belt cleaning is recycled and screened by relative screen.
The water required for the extraction is taken from the circulating water which has three advantage:
• the sugar dissolved in the cleaning water foes into the juice
• the water taken for the extraction is replaced by fresh water so that the cleaning water is replaced
• the water consumption is reduced to the water quantity used for extraction.
The pressed juice is fed onto a vibratory screen. There, particles are removed and returned to the mash feed by a pump.
All prices are valid Ex-Works, excl.VAT.
Freight Charges: depending on dimensions and destination
Delivery: from 97753 Karlstadt-Karlburg
Subject to prior sale
Visit our Web-Site under: www.eurolux-ag.com
EURO lux Vertriebsgesellschaft mbH Sitz der Gesellschaft: Würzburg Sparkasse Mainfranken Würzburg
Hessheimer Weg 3-5
•
D-97753 Karlstadt-Karlburg Registergericht: Amtsgericht Würzburg
(b.Würzburg)
Tel. +49 (0) 93 53 – 9 09 05 – 0
HRB Nr. 4983
•
BLZ 790 500 00
Geschäftsführung: Paul Lamprecht Konto-Nr. 190 012 336
Gerichtsstand: Würzburg S.W.I.F.T-Code BY LA DE M1 SWU
Fax. +49 (0) 93 53 – 9 09 05 – 22 Ust-IdNr. DE 811 655 121 IBAN DE 56 7905 0000 0190 0123 36