OPERATING MANUAL
SYMOTOR SEIKO LTD.
Thank you for purchasing SYMOTOR SEIKO products. Please read this operating manual thoroughly before installing and operating the motor.
TEL: 886-7-7353737 / FAX: 886-7-7329595 / E-mail: Service@Symotor.com.tw / Wed: www.symotor.com.tw
RoHS
Precautions
INDUCTION MOTOR REVERSIBLE MOTOR
Do not use in a place where there is inflammable gas and/or corrosive gas.
When installing the motor into your equipment, ensure that the motor lead wires are fixed and do not move.
In addition, do not apply any pressure to these lead wires.
The motor housing (Lead wire type) must be mounted with a screw and spring washer to the ground point of the
equipment. Installation must be performed by a qualified installer.
Do not touch the motor that has been constricted for a long period of time. It will be hot and can burn you.
Always turn off the power to the motor before conducting checks or performing work on the motor.
Please confirm the attached capacitor meets the specifications which shown on the label of motor before installation.
When installing a motor with a cooling fan onto a divice, leave 10 mm (0.4 inch) or more behind the fan cover or
open a ventilation hole so that the cooling inlet on the back of the motor cover is not blocked .
Temperature of the motor its label show [TP]. star(motor stop)120 C 5 C return(motor run)90 C 15 C.
Compliance "CE" product its label show [CE]. Compliance "RoHS" product its label show [RoHS].
Compliance "CCC" product its label show [CCC]
Single-phase Motor
Three-phase Motor
To rotate the motor in a clockwise(CW) direction,
connect yellow wire with power to CW.
To rotate it in a counterclockwise(CCW) direction,
connect white wire with power
Clockwise
Power
Power
black
black
yellow
yellow
white
white
Connect the motor according to the figure.
When connected according to the connection diagram, the motor will
operate in the clockwise direction (CW) as viewed from the motor output
shaft. To change the direction of rotation, change any two connections
between R, S and T.
ELECTROMAGNETIC BRAKE MOTOR
Standard
CE marking
Accessorial
Motor Applications for standard
EN 55014-1 EN 55014-2 EN 61000-3-2
EN 61000-3-3 EN 60335-1
Motor Standards File No.
EMC(Electromagnetic compatibility 89/336/EEC)
License No. AE 50009908 0001
Motor
Capacitor(for only single-phase motors)
This operation manual
sleeve(for only round shaft)
screw(for only gearhead)
protection cap(for only gearhead)
key(for only gearhead)
Single-phase Motor
1 unit
1 piece
1 copy
1 piece
4 piece
1 piece
1 piece
Three-phase Motor
The brake wire its color brown wire is for Single-phase 200-240V
The brake wire its color yellow wire is for Single-phase 100-115V
Clockwise
Power
yellow
yellow
white
white
black
black
brown(yellow)
brown(yellow)
brown(yellow)
brown(yellow)
Power
LVD(Low Voltage pirective 73/23/EEC)
ELC00583/2000
Capacitor Applications for standard
DIN EN 60252-1 EN 60252-1
To change the direction of rotation,
change any two connections between R, S and T.
To rotate the motor in a clockwise(CW) direction, flip switch2 to CW.
To rotate it in a counterclockwise(CCW) direction, flip switch 2 to CCW.
Capacitor Standards File Number
VDE 40020020 UL E189841
2-POLE HIGH SPEED MOTOR
Single-phase Motor
Hazardous substances
RoHS (Directive 2002/95/EC 27Jan.2003) compliant
Three-phase Motor
Clockwise
To change the direction of rotation,
change any two connections between R, S and T.
To rotate the motor in a clockwise(CW) direction,
connect yellow wire with power to CW.
To rotate it in a counterclockwise(CCW) direction,
connect white wire with power
Power
black
yellow
white
Black
Installing the motor
Power
gray
yellow
To assemble the gearhead straight to motor and twist
the unit from side to side carefully to lead it to certain
position.
Drill holes on the mounting plate and fix the motor
and gearhead on the plate using screws supplied
with the gearhead.
white
VARIABLE SPEED MOTOR
Single-phase Motor
Single-phase Motor with Independent Fan.
The Independent Fan power use gray line, use single-phase 110V~230V.
Shaft
TORQUE MOTOR
Inside
Three-phase Motor with Independent Fan.
The Independent Fan power use gray line, use single-phase 200V~230V.
Single-phase Motor
To rotate the motor in a clockwise(CW) direction,
connect yellow wire with power to CW.
To rotate it in a counterclockwise(CCW) direction,
connect white wire with power
Power
black
yellow
Power
Flange
black
white
yellow
blue
white
blue
gray
gray
Inside
Controller Signal line
C 2014 SYMOTOR SEIKO LTD. All right reserved.