Multiplexer To connect complete Transformer Description Raytech Multiplexer is designed to drastically reduce cabling time and increase test performance. It is made to be used with Raytech Winding Resistance and Turns Ratio Meters. Any Multiplexer configuration can be easily controlled by a Winding Resistance Meters touch panel or by remote. Example Advantages & Features Specifications: Minimizes cabling time. Does all measurements with one cabling per transformer, including Winding Resistance and Turns Ratio. Uses up to three Multiplexers and measure transformers with three winding systems with one cabling sequence. Get your own configuration containing from one to three Multiplexers, from one to three Winding Resistance Meters and one Turns Ratio Meter. Control your Tap Changer with a powerful tap changer interface. Operate all instruments on a touch screen or by remote control. Get a customized complete solution containing WR, TR and Multiplexers. Ask Raytech for a ATOS (Automatic Transformer Observing System) Power supply: Case: Interface: 100..240VAC 19’’ Rack 4U Raytech Serial Intercom Included in Delivery 10m standard cables set to test object Standard cables to WR and TR. Firmware Update for WR14/50/100 Options Cable set for 2 or 3 Multiplexer systems Integrated Safety Unit providing fused electrical power, central interlock system and central warning lamp interface Raytech GmbH, Oberebenestrasse 11, CH-5620 Bremgarten, www.raytech.ch, welcome@raytech.ch Tel +41 56 648 60 10, Fax +41 56 648 60 11