Panasonic G-series
Small ac geared motors & brake motors
ideas in motion
Panasonic G-series
6W to 90W
geared motors
Panasonic, one of the largest motor manufacturers in the
world, have designed and developed the G-series range
of geared motors. Covering powers from 6 to 90W, these
units are now established in a worldwide market with a
reputation for quality, value and long life.
➤
➤
➤
2
➤
➤
➤
Sealed for life, grease filled gearboxes
offer a long and maintenance free
service life
Helical spur gearboxes ensure quiet,
efficient running
Speed range from 500r/min down to
0.7r/min
Fixed speed and variable speed
models available
Universal mounting
Proven quality and reliability
Construction
The Panasonic G-series motors are designed for 1 or 3
phase supply. The 6-40W models are all self cooled and
the 60 and 90W units are supplied with a cooling fan.
Gearboxes use a combination of helical and spur gears
for high speed efficient running and are grease lubricated. Standard ratios of 3:1 to 200:1. However, where
higher ratios and lower speeds are required, an intermediate 10:1 decimal gearbox is available.
Range overview
1 phase
Geared motors suitable for fixed speed running in a power range 6 to 90W.
Quick reversing
Single phase input geared motors with a builtin constant friction brake that reduces overrun.
3 phase
Geared motors ranging from 25-90W. The
230V versions suit variable speed running with
an inverter. The 400V versions are designed to
be connected directly to 3 phase supplies.
Brake motor
Geared motors with an integrated spring
applied brake for 1 or 3 phase 230V supply.
Other models available
➤
➤
➤
➤
➤
Geared motors for 110V and 60Hz supply
IP65 protection on 1 and 3 phase geared
motors 25 to 60W
IP67 protection for severe washdown
environments
B1-series with integrated drive and IP65
enclosure
B3-series with integrated drive, IP65 enclosure
and positioning capabilities
Micro-inverter
A compact digital inverter offering 30:1 speed
range on all 230V 3 phase motors.
Alternatively, the Lenze smd inverter is available for applications that require greater functionality.
Applications
Conveyors
Food machinery
Packaging
Pumps
Labelling
Test equipment
Panasonic G-series
geared motors
Page Index
1 phase standard induction & quick reversible motors
6-19
3 phase induction motors
20-29
1 phase & 3 phase brake motors
30-39
Micro inverter
40-43
Feet options
44-45
Motor data
46
Part numbers
47-48
Gearbox data & filtting instructions
49
Service factors
To maintain the life of the geared motor, a service factor must be selected which is dependent upon type of load and
duty. From the below table, examples are given of typical applications. For example, under constant load a service
factor of 1.0 should be used.
Service factor
8 h/day
24 h/day
Type of load
Application
Constant
Belt conveyor, Film winding
One-way operation
0.8
1.0
1.5
Light impact
Start/Stop/Cam operation
1.2
1.5
2.0
Medium impact
Instant Reverse operation with Reversible motor
Instant stall operation with brake pack
1.5
2.0
2.5
Heavy impact
Repetition of medium impact
Instant stall of the motor at vibrating material
2.0 ~ 2.5
2.5 ~ 3.0
3.0 ~ 3.5
5 h/day
Actual speeds
The actual output speeds under rated torque is typically 10-20%
less than the nominal speed. Motor speed – torque curves give
the motor full load rated speed and indication of how speed
varies with load. Nominal speeds are based on a motor nominal
speed of 1500 r/min.
Brake motors
Panasonic G-series brake motors feature a built-in spring applied
electromagnetic brake. This reduces stopping times and gives a
static holding torque.
Motor overrun is normally 2-4 revolutions and the brake is rated
for 6 operations per minute.
See pages 30-39.
Quick reversible motors
When you turn off the power to the Reversible motor, braking
torque will be generated due to a built-in constant friction
braking system.
The revolutions the motor makes until it completely stops are
described as overrun. A holding load torque reduces and a driving load torque increases the overrun. The overrun values in the
table are for induction purposes only and do not include gearbox
ratio or load inertia.
See pages 6-19.
Output
(W)
Braking torque
(Ncm)
Overrun
(revolution)
6
0.59
5.0
15
1.27
4.5
25
1.47
5.5
40
3.92
6.0
60
3.92
6.0
90
3.92
6.0
3
Panasonic G-series
fixed speed solutions
For constant speed applications, Panasonic offer a range of standard induction and and brake motors for both single and three
phase voltage supplies plus quick reversible motors for single phase supplies.
1 phase standard induction motors (pages 6-19)
➤
➤
➤
continuous rating S1
thermally or impedance protected
class E insulation
All the induction motors in the G-Series range are highly efficient
and quiet in operation. The same high quality design and basic
construction is used throughout the range. All motors are 4 pole
with a nominal speed of 1500 r/min at 50 Hz.
4
1 phase quick reversible motors (pages 6-19)
➤
➤
➤
built-in constant friction braking system
reduced overrun and fast stopping
ideal for quick reversing or stop/start applications
A friction plate attached to the end of the rotor is constantly under
friction via four cylindrical brake pads and springs. The resulting
braking torque is continuously applied to the motor even during
motor running. When power is removed, this friction results in
faster stopping of the motor.
3 phase induction motors (pages 20-29)
➤
➤
➤
continuous rating S1
thermally protected
class E insulation
Three phase induction motors deliver improved torque performance over single phase models.
The 230V versions suit variable speed running with the
Panasonic Micro-Inverter. The 400V versions are designed to be
connected directly to 3 phase supplies.
1 & 3 phase brake motors (pages 30-39)
➤
➤
➤
spring applied electromagnetic brake
built-in rectifier
gives static holding torque with power off
The brake releases automatically when the motor is powered,
leaving no residual torque. When the motor is switched off the
brake re-engages. Motor overun is typically 2-4 revolutions and
the brake is rated for six operations per minute.
Panasonic G-series
variable speed solutions
If variable speed is required the 230V 3 phase geared motors can be used with the Panasonic Micro-inverter. This combination
offers excellent speed/torque characteristics and good dynamic motor performance. If greater functionality is required, the
Lenze smd inverter offers further options including its unique EPM memory chip.
Micro-Inverter (pages 40-43)
The Panasonic Micro-Inverter can be used with any 3
phase motor, rated for 230V operation.
There are two versions available: one suitable for the 25
and 40W motors and another for the 60 and 90W motors.
Features include built-in or external speed potentiometer,
dynamic braking and acceleration/deceleration ramp.
➤
➤
➤
➤
5
Excellent speed/torque characteristics
Large speed range
Suits 3 phase 230V motors; 25-90W
Simple set up and operation
smd inverter
Designed for general purpose applications, Lenze smd
inverters offer compact design, simple installation and
fast set-up.
➤
➤
➤
➤
➤
Integrated RFI filter
Innovative EPM plug-in memory chip
Compliant CE, UL, cUL
Quick commissioning, integrated
keypad and pre-configured settings
Options of DIN rail mounting, dc
braking and remote keypad
The smd model ESMD251X2SAF has a rated output
power of 0.25kW and suits any G-series geared motors
rated for 230V 3 phase input. This inverter input is 180264V, 48-62Hz, Dimensions are 93 wide x 146 high x 83
deep.
Accessories
The smd drive features the innovative EPM memory chip
which contains the entire drive and motor configuration.
The EPM can easily be removed and replaced for fast and
efficent program changes, saving time and money.
Features include up to 3 pre-set jog speeds, voltage boost,
dc injection braking, adjustable chopper frequency
between 4 and 10Hz, digital and analog inputs and relay
output.
Options
➤
➤
➤
DIN rail mounting kit ESMD093DR
Pack of EPM memory chips ESMD01BP
EPM programmer, battery powered ESMD01EP
For more information see www.lenze.co.uk under
Products/Frequency inverters.
The EPM programmer is battery powered and will copy an
EPM chip in less than 2 seconds. You can also copy from a
file to an EPM, and edit/create smd programs. A RS232
port for PC operation is included.
Panasonic G-series
6W 1 phase Standard & Quick Reversible
Standard induction motors suit fixed speed applications.
Quick reversing motors have a built-in braking systemfor reduced overrun and fast reversing.
M6GA gearbox
➤
➤
➤
➤
➤
➤
6
➤
Rated 230V ± 10% and 50 Hz
Continuous duty S1
Enclosure IP22 (cable downwards)
Class E insulation
Supplied with 0.6µF run capacitor
Thermal protection by impedance
current limiting
approved, UL on request
Standard Induction Motor
Model Number : M6IA6G4GE
Nominal
speed
r/min
500
300
200
150
100
75
60
50
30
20
15
12.5
10
8.3
7.5
6.0
5.0
3.0
2.0
1.5
1.3
1.0
0.8
Quick Reversible Motor
Model Number : M6RA6G4GE
Gearbox
Actual Rated
Actual Rated
model
speed torque
Assembly
speed torque
Assembly
Length Weight
number
@230V Nm
number
@230V
Nm
number
L
kg
M6GA 3B
408
0.11 PAN GS 006 IGE 500.0 A L1 408
0.11 PAN GS 006 RGE 500.0 A L1 133
M6GA 5B
245
0.18 PAN GS 006 IGE 300.0 A L1 245
0.18 PAN GS 006 RGE 300.0 A L1 133
M6GA 7.5B
163
0.27 PAN GS 006 IGE 200.0 A L1 163
0.27 PAN GS 006 RGE 200.0 A L1 133
M6GA 10B
123
0.33 PAN GS 006 IGE 150.0 A L1 123
0.33 PAN GS 006 RGE 150.0 A L1 133
M6GA 15B
82
0.5 PAN GS 006 IGE 100.0 A L1 82
0.5 PAN GS 006 RGE 100.0 A L1 133
M6GA 20B
61
0.66 PAN GS 006 IGE 075.0 A L1 61
0.66 PAN GS 006 RGE 075.0 A L1 142
M6GA 25B
49
0.83 PAN GS 006 IGE 060.0 A L1 49
0.83 PAN GS 006 RGE 060.0 A L1 142
1.0
M6GA 30B
41
1.0 PAN GS 006 IGE 050.0 A L1 41
1.0 PAN GS 006 RGE 050.0 A L1 142
M6GA 50B
25
1.7 PAN GS 006 IGE 030.0 A L1 25
1.7 PAN GS 006 RGE 030.0 A L1 142
M6GA 75B*
16.3
2.3 PAN GS 006 IGE 020.0 A L1 16.3
2.3 PAN GS 006 RGE 020.0 A L1 142
M6GA 100B* 12.3
2.5 PAN GS 006 IGE 015.0 A L1 12.3
2.5 PAN GS 006 RGE 015.0 A L1 142
M6GA 120B* 10.2
2.5 PAN GS 006 IGE 012.5 A L1 10.2
2.5 PAN GS 006 RGE 012.5 A L1 142
M6GA 150B*
8.2
2.5 PAN GS 006 IGE 010.0 A L1 8.2
2.5 PAN GS 006 RGE 010.0 A L1 142
M6GA 180B*
6.8
2.5 PAN GS 006 IGE 008.3 A L1 6.8
2.5 PAN GS 006 RGE 008.3 A L1 142
M6GA 10XM*
Additional gearbox M6GA 10XM must be used for speeds of 7.5 r/min and below
M6GA 20B*
6.1
2.5 PAN GS 006 IGE 007.5 A L1 6.1
2.5 PAN GS 006 RGE 006.0 A L1 165
M6GA 25B*
4.9
2.5 PAN GS 006 IGE 006.0 A L1 4.9
2.5 PAN GS 006 RGE 006.0 A L1 165
M6GA 30B*
4.1
2.5 PAN GS 006 IGE 005.0 A L1 4.1
2.5 PAN GS 006 RGE 005.0 A L1 165
M6GA 50B*
2.5
2.5 PAN GS 006 IGE 003.0 A L1 2.5
2.5 PAN GS 006 RGE 003.0 A L1 165
M6GA 75B*
1.6
2.5 PAN GS 006 IGE 002.0 A L1 1.6
2.5 PAN GS 006 RGE 002.0 A L1 165
1.2
M6GA 100B*
1.2
2.5 PAN GS 006 IGE 001.5 A L1 1.2
2.5 PAN GS 006 RGE 001.5 A L1 165
M6GA 120B*
1.0
2.5 PAN GS 006 IGE 001.3 A L1 1.0
2.5 PAN GS 006 RGE 001.3 A L1 165
M6GA 150B*
0.8
2.5 PAN GS 006 IGE 001.0 A L1 0.8
2.5 PAN GS 006 RGE 001.0 A L1 165
M6GA 180B*
0.7
2.5 PAN GS 006 IGE 000.8 A L1 0.7
2.5 PAN GS 006 RGE 000.8 A L1 165
* torque limiter recommended
1 signifies standard leadwire position 1 as shown. For further mounting positions please see page 48.
6W
1 phase
32
CABLE 300mm
26
12
ø25
ø62
7
10
CTRS
ø8 h7
4xM4 ON 70 PCD
7
(49.5)
75
60
L
Standard induction
Quick reversible
Nm
0.07
Nm
0.07
0.06
0.06
0.05
0.05
0.04
0.04
0.03
0.03
0.02
0.02
0.01
0.01
0
0
500
1000
1500
2000
Speed (r/min)
Motor speed-torque curve
0
0
500
1000
1500
2000
Speed (r/min.)
Motor speed-torque curve
230 V
230 V
Rated current
0.08 A
Rated current
0.10 A
Starting current
0.12 A
Starting current
0.12 A
Input power
19 W
Input power
22 W
1225 r/min
Rated speed
1225 r/min
Rated speed
Panasonic G-series
15W 1 phase Standard & Quick Reversible
Standard induction motors suit fixed speed applications.
Quick reversing motors have a built-in braking system
for reduced overrun and fast reversing.
M7GA gearbox
➤
➤
➤
➤
➤
➤
8
➤
Rated 230V ± 10% and 50 Hz
Continuous duty S1
Enclosure IP22 (cable downwards)
Class E insulation
Supplied with run capacitor (standard
1.2µF, 1.0µF for Quick Reversible)
Integrated thermal protection switch
(For external connection)
approved, UL on request
Standard Induction Motor
Model Number : M7IA15G4GE
Nominal
speed
r/min
500
300
200
150
100
75
60
50
30
20
15
12.5
10
8.3
7.5
6.0
5.0
3.0
2.0
1.5
1.3
1.0
0.8
Quick Reversible Motor
Model Number : M7RA15G4GE
Gearbox
Actual Rated
Actual Rated
model
speed torque
Assembly
speed torque
Assembly
Length Weight
number
@230V
Nm
number
@230V
Nm
number
L
kg
M7GA 3B
408
0.27 PAN GS 015 IGE 500.0 A L1 408
0.27 PAN GS 015 RGE 500.0 A L1 144
M7GA 5B
245
0.45 PAN GS 015 IGE 300.0 A L1 245
0.45 PAN GS 015 RGE 300.0 A L1 144
M7GA 7.5B
163
0.67 PAN GS 015 IGE 200.0 A L1 163
0.67 PAN GS 015 RGE 200.0 A L1 144
M7GA 10B
123
0.83 PAN GS 015 IGE 150.0 A L1 123
0.83 PAN GS 015 RGE 150.0 A L1 144
M7GA 15B
82
1.24 PAN GS 015 IGE 100.0 A L1 82
1.24 PAN GS 015 RGE 100.0 A L1 144
M7GA 20B
61
1.65 PAN GS 015 IGE 075.0 A L1 61
1.65 PAN GS 015 RGE 075.0 A L1 154
M7GA 25B
49
2.1 PAN GS 015 IGE 060.0 A L1 49
2.1
PAN GS 015 RGE 060.0 A L1 154
1.6
M7GA 30B
41
2.5 PAN GS 015 IGE 050.0 A L1 41
2.5
PAN GS 015 RGE 050.0 A L1 154
M7GA 50B
25
4.1 PAN GS 015 IGE 030.0 A L1 25
4.1
PAN GS 015 RGE 030.0 A L1 154
M7GA 75B*
16.3
4.9 PAN GS 015 IGE 020.0 A L1 16.3
4.9
PAN GS 015 RGE 020.0 A L1 154
M7GA 100B* 12.3
4.9 PAN GS 015 IGE 015.0 A L1 12.3
4.9
PAN GS 015 RGE 015.0 A L1 154
M7GA 120B* 10.2
4.9 PAN GS 015 IGE 012.5 A L1 10.2
4.9
PAN GS 015 RGE 012.5 A L1 154
M7GA 150B*
8.2
4.9 PAN GS 015 IGE 010.0 A L1 8.2
4.9
PAN GS 015 RGE 010.0 A L1 154
M7GA 180B*
6.8
4.9 PAN GS 015 IGE 008.3 A L1 6.8
4.9
PAN GS 015 RGE 008.3 A L1 154
M7GA 10XM*
Additional gearbox M7GA 10XM must be used for speeds of 7.5 r/min and below
M7GA 20B*
6.1
4.9 PAN GS 015 IGE 007.5 A L1 6.1
4.9
PAN GS 015 RGE 006.0 A L1 180
M7GA 25B*
4.9
4.9 PAN GS 015 IGE 006.0 A L1 4.9
4.9
PAN GS 015 RGE 006.0 A L1 180
M7GA 30B*
4.1
4.9 PAN GS 015 IGE 005.0 A L1 4.1
4.9
PAN GS 015 RGE 005.0 A L1 180
M7GA 50B*
2.5
4.9 PAN GS 015 IGE 003.0 A L1 2.5
4.9
PAN GS 015 RGE 003.0 A L1 180
M7GA 75B*
1.6
4.9 PAN GS 015 IGE 002.0 A L1 1.6
4.9
PAN GS 015 RGE 002.0 A L1 180
2.0
M7GA 100B*
1.2
4.9 PAN GS 015 IGE 001.5 A L1 1.2
4.9
PAN GS 015 RGE 001.5 A L1 180
M7GA 120B*
1.0
4.9 PAN GS 015 IGE 001.3 A L1 1.0
4.9
PAN GS 015 RGE 001.3 A L1 180
M7GA 150B*
0.8
4.9 PAN GS 015 IGE 001.0 A L1 0.8
4.9
PAN GS 015 RGE 001.0 A L1 180
M7GA 180B*
0.7
4.9 PAN GS 015 IGE 000.8 A L1 0.7
4.9
PAN GS 015 RGE 000.8 A L1 180
* torque limiter recommended
1 signifies standard leadwire position 1 as shown. For further mounting positions please see page 48.
15W
1 phase
32
CABLE 300mm
27
ø10 h7
25
ø72
ø30
4
15
CTRS
4xM5 ON 82 PCD
9
80
11.5
L
(58)
70
Standard induction
Quick reversible
Nm
0.15
Nm
0.15
0.125
0.125
0.1
0.10
0.075
0.075
0.05
0.05
0.025
0.025
0
0
250
500
750
1000
1250 1500
1750 2000
Speed (r/min)
Motor speed-torque curve
0
0
250
500
750
1000
1250 1500
1750 2000
Speed (r/min.)
Motor speed-torque curve
230 V
230 V
Rated current
0.13 A
Rated current
0.17 A
Starting current
0.23 A
Starting current
0.24 A
Input power
34 W
Input power
Rated speed
1225 r/min
Rated speed
38 W
1225 r/min
Panasonic G-series
25W 1 phase Standard & Quick Reversible
Standard induction motors suit fixed speed applications.
Quick reversing motors have a built-in braking system
for reduced overrun and fast reversing.
➤
➤
➤
➤
➤
10
➤
➤
Rated 230V ± 10% and 50 Hz
Continuous duty S1
Enclosure IP54
Class E insulation
Supplied with run capacitor (1.5µF
for standard, 1.8µF for Quick
Reversible)
Integrated thermal protection switch
(For external connection)
approved, UL on request
Standard Induction Motor
Model Number : M8IA25G4GE
Nominal
speed
r/min
500
300
200
150
100
75
60
50
30
20
15
12.5
10
8.3
7.5
6.0
5.0
3.0
2.0
1.5
1.3
1.0
0.8
M8GA gearbox
Quick Reversible Motor
Model Number : M8RA25G4GE
Gearbox
Actual Rated
Actual Rated
model
speed torque
Assembly
speed torque
Assembly
Length Weight
number
@230V
Nm
number
@230V
Nm
number
L
kg
M8GA 3B
408
0.44 PAN GS 025 IGE 500.0 A K1 417
0.46 PAN GS 025 RGE 500.0 A K1 149
M8GA 5B
245
0.73 PAN GS 025 IGE 300.0 A K1 250
0.77 PAN GS 025 RGE 300.0 A K1 149
M8GA 7.5B
163
1.1 PAN GS 025 IGE 200.0 A K1 167
1.15 PAN GS 025 RGE 200.0 A K1 149
M8GA 10B
123
1.35 PAN GS 025 IGE 150.0 A K1 125
1.5 PAN GS 025 RGE 150.0 A K1 149
M8GA 15B
82
2.0 PAN GS 025 IGE 100.0 A K1 83
2.1 PAN GS 025 RGE 100.0 A K1 149
M8GA 20B
61
2.7 PAN GS 025 IGE 075.0 A K1 63
2.9 PAN GS 025 RGE 075.0 A K1 159
M8GA 25B
49
3.4 PAN GS 025 IGE 060.0 A K1 50
3.6 PAN GS 025 RGE 060.0 A K1 159
M8GA 30B
41
4.1 PAN GS 025 IGE 050.0 A K1 42
4.3 PAN GS 025 RGE 050.0 A K1 159
2.5
M8GA 50B
25
6.8 PAN GS 025 IGE 030.0 A K1 25
7.1 PAN GS 025 RGE 030.0 A K1 159
M8GA 75B*
16.3
7.8 PAN GS 025 IGE 020.0 A K1 16.7
7.8 PAN GS 025 RGE 020.0 A K1 159
M8GA 100B* 12.3
7.8 PAN GS 025 IGE 015.0 A K1 12.5
7.8 PAN GS 025 RGE 015.0 A K1 159
M8GA 120B* 10.2
7.8 PAN GS 025 IGE 012.5 A K1 10.4
7.8 PAN GS 025 RGE 012.5 A K1 159
M8GA 150B*
8.2
7.8 PAN GS 025 IGE 010.0 A K1 8.3
7.8 PAN GS 025 RGE 010.0 A K1 159
M8GA 180B*
6.8
7.8 PAN GS 025 IGE 008.3 A K1 6.9
7.8 PAN GS 025 RGE 008.3 A K1 159
M8GA 10XM*
Additional gearbox M8GA 10XM must be used for speeds of 7.5 r/min and below
M8GA 20B*
6.1
7.8 PAN GS 025 IGE 007.5 A K1 6.3
7.8 PAN GS 025 RGE 006.0 A K1 186
M8GA 25B*
4.9
7.8 PAN GS 025 IGE 006.0 A K1
5
7.8 PAN GS 025 RGE 006.0 A K1 186
M8GA 30B*
4.1
7.8 PAN GS 025 IGE 005.0 A K1 4.2
7.8 PAN GS 025 RGE 005.0 A K1 186
M8GA 50B*
2.5
7.8 PAN GS 025 IGE 003.0 A K1 2.5
7.8 PAN GS 025 RGE 003.0 A K1 186
M8GA 75B*
1.6
7.8 PAN GS 025 IGE 002.0 A K1 1.7
7.8 PAN GS 025 RGE 002.0 A K1 186
2.9
M8GA 100B*
1.2
7.8 PAN GS 025 IGE 001.5 A K1 1.3
7.8 PAN GS 025 RGE 001.5 A K1 186
M8GA 120B*
1.0
7.8 PAN GS 025 IGE 001.3 A K1 1.0
7.8 PAN GS 025 RGE 001.3 A K1 186
M8GA 150B*
0.8
7.8 PAN GS 025 IGE 001.0 A K1 0.8
7.8 PAN GS 025 RGE 001.0 A K1 186
M8GA 180B*
0.7
7.8 PAN GS 025 IGE 000.8 A K1 0.7
7.8 PAN GS 025 RGE 000.8 A K1 186
* torque limiter recommended
1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 48.
25W
1 phase
67
32
11.5
75
1
30
MAX
26
10ø h7
ø82
ø30
4
15
CTRS
44
25
4xM5 ON 94 PCD
(66.5)
85
80
L
Standard induction
Quick reversible
Nm
3.0
Nm
3.0
2.5
2.5
2.0
2.0
1.5
1.5
1.0
1.0
0.5
0.5
0
0
500
1000
1500
2000
Speed (r/min.)
Motor speed-torque curve
0
0
500
1000
1500
2000
Speed (r/min.)
Motor speed-torque curve
230 V
230 V
Rated current
0.23 A
Rated current
0.25 A
Starting current
0.37 A
Starting current
0.43 A
Input power
Rated speed
50 W
Input power
57 W
1225 r/min
Rated speed
1250 r/min
11
Panasonic G-series
40W 1 phase Standard & Quick Reversible
Standard induction motors suit fixed speed applications.
Quick reversing motors have a built-in braking system
for reduced overrun and fast reversing.
M9GA gearbox
➤
➤
➤
➤
➤
➤
12
➤
Rated 230V ± 10% and 50 Hz
Standard induction motor rated
continuous duty S1
Quick reversing motor rated
intermittent duty S2
Enclosure IP54
Class E insulation
Supplied with run capacitor
(Standard induction 2.5 µF, quick
reversible 3.0µF)
Integrated thermal protection switch
(For external connection)
➤
approved, UL on request
Standard Induction Motor
Model Number : M9IA40K4GE
Nominal
speed
r/min
500
300
200
150
100
75
60
50
30
20
15
12.5
10
8.3
7.5
6.0
5.0
3.0
2.0
1.5
1.3
1.0
0.8
Quick Reversible Motor
Model Number : M9RA40K4GE
Gearbox
Actual Rated
Actual Rated
model
speed torque
Assembly
speed torque
Assembly
Length Weight
number
@230V
Nm
number
@230V Nm
number
L
kg
M9GA 3B
400
0.75 PAN GS 040 IGE 500.0 A K1 392
0.8 PAN GS 040 RGE 500.0 A K1 179
M9GA 5B
240
1.26 PAN GS 040 IGE 300.0 A K1 235
1.3 PAN GS 040 RGE 300.0 A K1 179
M9GA 7.5B
160
1.9 PAN GS 040 IGE 200.0 A K1 157
2.0 PAN GS 040 RGE 200.0 A K1 179
M9GA 10B
120
2.3 PAN GS 040 IGE 150.0 A K1 118
2.5 PAN GS 040 RGE 150.0 A K1 179
M9GA 15B
80
3.5 PAN GS 040 IGE 100.0 A K1
78
3.7 PAN GS 040 RGE 100.0 A K1 179
M9GA 20B
60
4.7 PAN GS 040 IGE 075.0 A K1
59
5.0 PAN GS 040 RGE 075.0 A K1 197
M9GA 25B
48
5.8 PAN GS 040 IGE 060.0 A K1
47
6.2 PAN GS 040 RGE 060.0 A K1 197
4.0
M9GA 30B
40
7.0 PAN GS 040 IGE 050.0 A K1
39
7.4 PAN GS 040 RGE 050.0 A K1 197
M9GA 50B
24
9.8 PAN GS 040 IGE 030.0 A K1
24
9.8 PAN GS 040 RGE 030.0 A K1 197
M9GA 75B*
16
9.8 PAN GS 040 IGE 020.0 A K1
16
9.8 PAN GS 040 RGE 020.0 A K1 197
M9GA 100B*
12
9.8 PAN GS 040 IGE 015.0 A K1
12
9.8 PAN GS 040 RGE 015.0 A K1 197
M9GA 120B*
10
9.8 PAN GS 040 IGE 012.5 A K1
12
9.8 PAN GS 040 RGE 012.5 A K1 197
M9GA 150B*
8
9.8 PAN GS 040 IGE 010.0 A K1 9.8
9.8 PAN GS 040 RGE 010.0 A K1 197
M9GA 180B*
6.7
9.8 PAN GS 040 IGE 008.3 A K1 6.5
9.8 PAN GS 040 RGE 008.3 A K1 197
M9GA 10XM*
Additional gearbox M9GA 10XM must be used for speeds of 7.5 r/min and below
M9GA 20B*
6.0
9.8 PAN GS 040 IGE 007.5 A K1 5.9
9.8 PAN GS 040 RGE 006.0 A K1 229
M9GA 25B*
4.8
9.8 PAN GS 040 IGE 006.0 A K1 4.7
9.8 PAN GS 040 RGE 006.0 A K1 229
M9GA 30B*
4.0
9.8 PAN GS 040 IGE 005.0 A K1 3.9
9.8 PAN GS 040 RGE 005.0 A K1 229
M9GA 50B*
2.4
9.8 PAN GS 040 IGE 003.0 A K1 2.4
9.8 PAN GS 040 RGE 003.0 A K1 229
M9GA 75B*
1.6
9.8 PAN GS 040 IGE 002.0 A K1 1.6
9.8 PAN GS 040 RGE 002.0 A K1 229
4.7
M9GA 100B*
1.2
9.8 PAN GS 040 IGE 001.5 A K1 1.2
9.8 PAN GS 040 RGE 001.5 A K1 229
M9GA 120B*
1.0
9.8 PAN GS 040 IGE 001.3 A K1 1.0
9.8 PAN GS 040 RGE 001.3 A K1 229
M9GA 150B*
0.8
9.8 PAN GS 040 IGE 001.0 A K1 0.8
9.8 PAN GS 040 RGE 001.0 A K1 229
M9GA 180B*
0.7
9.8 PAN GS 040 IGE 000.8 A K1 0.7
9.8 PAN GS 040 RGE 000.8 A K1 229
* torque limiter recommended
1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 48.
40W
1 phase
67
32
27
25
30
MAX
ø12 h7
75
ø92
ø36
4
18
CTRS
44
13.5
1
13
(73.5)
4xM6 ON 104 PCD
105
90
L
Standard induction
Quick reversible
Nm
0.7
Nm
0.7
0.6
0.6
0.5
0.5
0.4
0.4
0.3
0.3
0.2
0.2
0.1
0.1
0
0
500
1000
1500
2000
Speed (r/min.)
Motor speed-torque curve
0
duty S2
0
500
1000
1500
2000
Speed (r/min.)
Motor speed-torque curve
230 V
230 V
Rated current
0.36 A
Rated current
0.41 A
Starting current
0.60 A
Starting current
0.63 A
Input power
79 W
Input power
94 W
1200 r/min
Rated speed
1175 r/min
Rated speed
Panasonic G-series
60W 1 phase Standard & Quick Reversible
Standard induction motors suit fixed speed applications.
Quick reversing motors have a built-in braking system
for reduced overrun and fast reversing. Both models are
available with flanged or square gearboxes.
Flanged M9GC
gearbox
➤ Rated 230V ± 10% and 50 Hz
➤ Continuous duty S1
➤ Enclosure IP54
➤ Class E insulation
➤ Supplied with run capacitor
14
➤
➤
Square M9GD
gearbox
(Standard 4.0µF, QR 5.0µF)
Integrated thermal protection switch
(For external connection)
approved, UL on request
Ordering specification and example
Replace the letter # from the assembly number with a ‘C’ for flanged gearbox or ‘D’ for
square gearbox as required. Examples:
100 r/min flanged with standard induction motor
5 r/min square with quick reversible motor
PAN GS 060 IGE 100.0 C K1
PAN GS 060 RGE 005.0 D K1
See page 48 for terminal box positions and feet.
Standard Induction Motor
Model Number : M9IC60GK4GE
Nominal
speed
r/min
500
300
200
150
100
75
60
50
30
20
15
12.5
10
7.5
6.0
5.0
3.0
2.0
1.5
1.3
1.0
0.8
Quick Reversible Motor
Model Number : M9RC60GK4GE
Gearbox
Actual Rated
Actual Rated
model
speed torque
Assembly
speed torque
Assembly
Length Weight
number
@230V
Nm
number
@230V
Nm
number
L
kg
M9G# 3B
408
1.1 PAN GS 060 IGE 500.0 # K1 433
1.1 PAN GS 060 RGE 500.0 # K1 225
M9G# 5B
245
1.9 PAN GS 060 IGE 300.0 # K1 260
1.8 PAN GS 060 RGE 300.0 # K1 225
M9G# 7.5B
163
2.9 PAN GS 060 IGE 200.0 # K1 173
2.7 PAN GS 060 RGE 200.0 # K1 225
M9G# 10B
123
3.5 PAN GS 060 IGE 150.0 # K1 130
3.35 PAN GS 060 RGE 150.0 # K1 225
M9G# 15B
82
5.3 PAN GS 060 IGE 100.0 # K1 87
5
PAN GS 060 RGE 100.0 # K1 225
M9G# 20B
61
6.6 PAN GS 060 IGE 075.0 # K1 65
6.2 PAN GS 060 RGE 075.0 # K1 225
M9G# 25B
49
8.2 PAN GS 060 IGE 060.0 # K1 52
7.7 PAN GS 060 RGE 060.0 # K1 225
4.5
M9G# 30B
41
9.9 PAN GS 060 IGE 050.0 # K1 43
9.2 PAN GS 060 RGE 050.0 # K1 225
M9G# 50B
25
16.5 PAN GS 060 IGE 030.0 # K1 26
15.4 PAN GS 060 RGE 030.0 # K1 225
M9G# 75B*
16.3
19.6 PAN GS 060 IGE 020.0 # K1 17.3
19.6 PAN GS 060 RGE 020.0 # K1 225
M9G# 100B* 12.3
19.6 PAN GS 060 IGE 015.0 # K1 13.0
19.6 PAN GS 060 RGE 015.0 # K1 225
M9G# 120B* 10.2
19.6 PAN GS 060 IGE 012.5 # K1 10.8
19.6 PAN GS 060 RGE 012.5 # K1 225
M9G# 150B*
8.2
19.6 PAN GS 060 IGE 010.0 # K1 8.7
19.6 PAN GS 060 RGE 010.0 # K1 225
M9G# 200B*
6.1
19.6 PAN GS 060 IGE 007.5 # K1 6.5
19.6 PAN GS 060 RGE 007.5 # K1 225
M9GC 10XB*
Additional gearbox M9GC 10XB must be used for speeds of 7.5 r/min and below
M9G# 25B*
4.9
19.6 PAN GS 060 IGE 006.0 # K1 5.2
19.6 PAN GS 060 RGE 006.0 # K1 265
M9G# 30B*
4.1
19.6 PAN GS 060 IGE 005.0 # K1 4.3
19.6 PAN GS 060 RGE 005.0 # K1 265
M9G# 50B*
2.5
19.6 PAN GS 060 IGE 003.0 # K1 2.6
19.6 PAN GS 060 RGE 003.0 # K1 265
M9G# 75B*
1.6
19.6 PAN GS 060 IGE 002.0 # K1 1.7
19.6 PAN GS 060 RGE 002.0 # K1 265
5.1
M9G# 100B*
1.2
19.6 PAN GS 060 IGE 001.5 # K1 1.3
19.6 PAN GS 060 RGE 001.5 # K1 265
M9G# 120B*
1.0
19.6 PAN GS 060 IGE 001.3 # K1 1.1
19.6 PAN GS 060 RGE 001.3 # K1 265
M9G# 150B*
0.8
19.6 PAN GS 060 IGE 001.0 # K1 0.9
19.6 PAN GS 060 RGE 001.0 # K1 265
M9G# 200B*
0.7
19.6 PAN GS 060 IGE 000.8 # K1 0.7
19.6 PAN GS 060 RGE 000.8 # K1 265
HIGHER TORQUES – available from 30 r/min and slower speeds, see following 60W high torque pages.
* torque limiter recommended
1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 48.
60W
1 phase
67
1
5
38
75
30
MAX
12
29
17
Ø34
92
36
60
(73.5)
Ø34
18
Ø15 h7
44
25
31
4 HOLES Ø8.5
90
120
4 x M6 ON 104 PCD
15
L
110
130
1
67
75
30
MAX
38
5
92
(73.5)
Ø34
18
4 x M6
ON 104 P.C.D.
17
Ø15 h7
29
25
31
120
90
L
Standard induction
Quick reversible
Nm
0.7
Nm
0.7
0.6
0.6
0.5
0.5
0.4
0.4
0.3
0.3
0.2
0.2
0.1
0.1
0
0
500
1000
1500
2000
Speed (r/min.)
Motor speed-torque curve
0
0
500
1000
1500
2000
Speed (r/min.)
Motor speed-torque curve
230 V
230 V
Rated current
0.51 A
Rated current
0.57 A
Starting current
0.85 A
Starting current
1.05 A
Input power
118 W
Input power
127 W
Rated speed
1225 r/min
Rated speed
1300 r/min
Panasonic G-series
60W HT 1 phase Standard & Quick Reversible
For speeds of 30 r/min and below high torque gearboxes are available, giving torques up to 29.4 Nm. Standard
induction motors suit fixed speed applications.
Flanged M9GS
gearbox
Quick reversing motors have a built-in braking system
for reduced overrun and fast reversing. Both models are
available with flanged or square gearboxes.
➤ Rated 230V ± 10% and 50 Hz
➤ Continuous duty S1
➤ Enclosure IP54
➤ Class E insulation
➤ Supplied with run capacitor (Standard
16
➤
➤
Square M9GT
gearbox
4.0µF, QR 5.0µF)
Integrated thermal protection switch
(For external connection)
approved, UL on request
Ordering specification and example
Replace the letter # from the assembly number with a ‘S’ for flanged gearbox or ‘T’ for
square gearbox as required. Examples:
30 r/min flanged with standard induction motor
1.5 r/min square with quick reversible motor
PAN GS 060 IGE 030.0 S K1
PAN GS 060 RGE 001.5 T K1
See page 48 for terminal box positions and feet.
Standard Induction Motor
Model Number : M9IC60GK4GE
Nominal
speed
r/min
30
20
15
12.5
10
7.5
3.0
2.0
1.5
1.3
1.0
0.8
Quick Reversible Motor
Model Number : M9RC60GK4GE
Gearbox
Actual Rated
Actual Rated
model
speed torque
Assembly
speed torque
Assembly
Length Weight
number
@230V
Nm
number
@230V
Nm
number
L
kg
M9G# 50B
25
16.5 PAN GS 060 IGE 030.0 # K1
26
15.4 PAN GS 060 RGE 030.0 # K1 252
M9G# 75B*
16.3
22.9 PAN GS 060 IGE 020.0 # K1
17
21.5 PAN GS 060 RGE 020.0 # K1 252
M9G# 100B* 12.3
29.4 PAN GS 060 IGE 015.0 # K1
13
29.4 PAN GS 060 RGE 015.0 # K1 252
4.9
M9G# 120B* 10.2
29.4 PAN GS 060 IGE 012.5 # K1 10.8
29.4 PAN GS 060 RGE 012.5 # K1 252
M9G# 150B*
8.2
29.4 PAN GS 060 IGE 010.0 # K1 8.7
29.4 PAN GS 060 RGE 010.0 # K1 252
M9G# 200B*
6.1
29.4 PAN GS 060 IGE 007.5 # K1 6.5
29.4 PAN GS 060 RGE 007.5 # K1 252
M9GC 10XB*
Additional gearbox M9GC 10XB must be used for speeds of 7.5 r/min and below
M9G# 50B*
2.5
29.4 PAN GS 060 IGE 003.0 # K1 2.6
29.4 PAN GS 060 RGE 003.0 # K1 292
M9G# 75B*
1.6
29.4 PAN GS 060 IGE 002.0 # K1 1.7
29.4 PAN GS 060 RGE 002.0 # K1 292
M9G# 100B*
1.2
29.4 PAN GS 060 IGE 001.5 # K1 1.3
29.4 PAN GS 060 RGE 001.5 # K1 292
5.5
M9G# 120B*
1.0
29.4 PAN GS 060 IGE 001.3 # K1 1.1
29.4 PAN GS 060 RGE 001.3 # K1 292
M9G# 150B*
0.8
29.4 PAN GS 060 IGE 001.0 # K1 0.9
29.4 PAN GS 060 RGE 001.0 # K1 292
M9G# 200B*
0.7
29.4 PAN GS 060 IGE 000.8 # K1 0.7
29.4 PAN GS 060 RGE 000.8 # K1 292
HIGHER SPEEDS – see the 60W and 90W selections on adjacent pages
* torque limiter recommended
1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 48.
60W
1 phase
high torque
67
1
45
6
75
30
MAX
12
92
36
60
(73.5)
Ø40
18
CTRS
44
Ø18 h7
20.5
35
30
38
4 HOLES Ø8.5
120
90
110
130
L
67
1
45
35
30
MAX
75
12
Ø18 h7
20.5
30
92
Ø40
(73.5)
Ø40
18
CTRS
44
4 HOLES Ø8.5
ON 104 P.C.D.
Ø18 h7
6
17
38
90
120
L
Standard induction
Quick reversible
Nm
0.7
Nm
0.7
0.6
0.6
0.5
0.5
0.4
0.4
0.3
0.3
0.2
0.2
0.1
0.1
0
0
500
1000
1500
2000
Speed (r/min.)
Motor speed-torque curve
0
0
500
1000
1500
2000
Speed (r/min.)
Motor speed-torque curve
230 V
230 V
Rated current
0.51 A
Rated current
0.57 A
Starting current
0.85 A
Starting current
1.05 A
Input power
118 W
Input power
127 W
Rated speed
1225 r/min
Rated speed
1300 r/min
Panasonic G-series
90W 1 phase Standard & Quick Reversible
Standard induction motors suit fixed speed applications.
Quick reversing motors have a built-in braking system
for reduced overrun and fast reversing. Both models are
available with flanged or square gearboxes.
Flanged M9GC
gearbox
➤ Rated 230V ± 10% and 50 Hz
➤ Standard motor rated continuous
duty S1, quick reversing duty S2
Enclosure IP54
➤
➤ Class E insulation
➤ Supplied with run capacitor
18
Square M9GD
gearbox
(Standard 4.5µF, QR 5.5µF)
➤ Integrated thermal protection switch
➤
(For external connection)
approved, UL on request
Ordering specification and example
Replace the letter # from the assembly number with a ‘C’ for flanged gearbox or ‘D’ for
square gearbox as required. Examples:
100 r/min flanged with standard induction motor
5 r/min square with quick reversible motor
PAN GS 090 IGE 100.0 C K1
PAN GS 090 RGE 005.0 D K1
See page 48 for terminal box positions and feet.
Standard Induction Motor
Model Number : M9IC90GK4GE
Nominal
speed
r/min
500
300
200
150
100
75
60
50
30
20
15
12.5
10
7.5
6.0
5.0
Quick Reversible Motor
Model Number : M9RC90GK4GE
Gearbox
Actual Rated
Actual Rated
model
speed torque
Assembly
speed torque
Assembly
Length Weight
number
@230V Nm
number
@230V Nm
number
L
kg
M9G# 3B
442
1.5 PAN GS 090 IGE 500.0 # K1 350
1.9 PAN GS 090 RGE 500.0 # K1 240
M9G# 5B
265
2.6 PAN GS 090 IGE 300.0 # K1 210
3.1 PAN GS 090 RGE 300.0 # K1 240
M9G# 7.5B
177
3.8 PAN GS 090 IGE 200.0 # K1 140
4.6 PAN GS 090 RGE 200.0 # K1 240
M9G# 10B
133
4.7 PAN GS 090 IGE 150.0 # K1 105
5.7 PAN GS 090 RGE 150.0 # K1 240
M9G# 15B
88
7.1 PAN GS 090 IGE 100.0 # K1
70
8.6 PAN GS 090 RGE 100.0 # K1 240
M9G# 20B
66
8.8 PAN GS 090 IGE 075.0 # K1
53
10.6 PAN GS 090 RGE 075.0 # K1 240
M9G# 25B
53
11 PAN GS 090 IGE 060.0 # K1
42
13.3 PAN GS 090 RGE 060.0 # K1 240
4.5
M9G# 30B
44
13.2 PAN GS 090 IGE 050.0 # K1
35
16.0 PAN GS 090 RGE 050.0 # K1 240
M9G# 50B
26.5
19.6 PAN GS 090 IGE 030.0 # K1
21
19.6 PAN GS 090 RGE 030.0 # K1 240
M9G# 75B*
17.7
19.6 PAN GS 090 IGE 020.0 # K1
14
19.6 PAN GS 090 RGE 020.0 # K1 240
M9G# 100B* 13.3
19.6 PAN GS 090 IGE 015.0 # K1 10.5
19.6 PAN GS 090 RGE 015.0 # K1 240
M9G# 120B*
11
19.6 PAN GS 090 IGE 012.5 # K1 8.8
19.6 PAN GS 090 RGE 012.5 # K1 240
M9G# 150B*
8.8
19.6 PAN GS 090 IGE 010.0 # K1
7
19.6 PAN GS 090 RGE 010.0 # K1 240
M9G# 200B*
6.6
19.6 PAN GS 090 IGE 007.5 # K1 5.3
19.6 PAN GS 090 RGE 007.5 # K1 240
M9GC 10XB*
Additional gearbox M9GC 10XB must be used for speeds of 7.5 r/min and below
M9G# 25B*
5.3
19.6 PAN GS 060 IGE 006.0 # K1 4.2
19.6 PAN GS 090 RGE 006.0 # K1 280
5.4
M9G# 30B*
4.4
19.6 PAN GS 060 IGE 005.0 # K1 3.5
19.6 PAN GS 090 RGE 005.0 # K1 280
HIGHER TORQUES – available from 20 r/min and slower speeds, see previous 60W high torque pages.
* torque limiter recommended
1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 48.
90W
1 phase
67
1
5
38
30
MAX
75
12
17
92
Ø34
36
60
(73.5)
18
Ø15 h7
44
29
25
31
4 HOLES Ø8.5
90
110
130
135
4 x M6 ON 104 PCD
19
L
1
67
75
30
MAX
38
5
Ø15 h7
92
(73.5)
Ø34
18
17
29
25
4 x M6
ON 104 P.C.D.
31
135
90
L
Standard induction
Quick reversible
Nm
1.5
Nm
1.5
1.0
1.0
0.5
0.5
0
0
500
1000
1500
2000
Speed (r/min.)
Motor speed-torque curve
0
duty S2
0
500
1000
1500
2000
Speed (r/min.)
Motor speed-torque curve
230 V
230 V
Rated current
0.67 A
Rated current
0.84 A
Starting current
1.40 A
Starting current
1.08 A
Input power
153 W
Input power
194 W
Rated speed
1325 r/min
Rated speed
1050 r/min
Panasonic G-series
25W 3 phase
These 3 phase induction motors deliver high starting
torques. 400V versions suit fixed speed applications.
230V versions are ideal for use with inverters such as
the Panasonic Micro-Inverter.
➤ Rated 230V or 400V ± 10%
➤ Continuous duty S1
➤ Enclosure IP54
➤ Class E insulation
➤ Integrated thermal protection switch
➤
20
M8GA gearbox
(For external connection)
approved, UL on request
230V 3 phase Motor
400V 3 phase Motor
Model Number : M8MA25GKP4W1 Model Number : M8MA25GK4CE1
Nominal
speed
r/min
500
300
200
150
100
75
60
50
30
20
15
12.5
10
8.3
7.5
6.0
5.0
3.0
2.0
1.5
1.3
1.0
0.8
Gearbox
Actual
model
speed
number
@230V
M8GA 3B
458
M8GA 5B
275
M8GA 7.5B
183
M8GA 10B
138
M8GA 15B
92
M8GA 20B
69
M8GA 25B
55
M8GA 30B
46
M8GA 50B
27.5
M8GA 75B*
18.3
M8GA 100B* 13.8
M8GA 120B* 11.5
M8GA 150B*
9.2
M8GA 180B*
7.6
M8GA 10XM*
M8GA 20B*
6.9
M8GA 25B*
5.5
M8GA 30B*
4.6
M8GA 50B*
2.8
M8GA 75B*
1.8
M8GA 100B*
1.4
M8GA 120B*
1.1
M8GA 150B*
0.9
M8GA 180B*
0.8
Rated
Actual Rated
torque
Assembly
speed torque
Assembly
Length Weight
Nm
number
@400V Nm
number
L
kg
0.41 PAN GS 025 MPW 500.0 A K1 450
0.41 PAN GS 025 MCE 500.0 A K1 149
0.69 PAN GS 025 MPW 300.0 A K1 270
0.69 PAN GS 025 MCE 300.0 A K1 149
1
PAN GS 025 MPW 200.0 A K1 180
1
PAN GS 025 MCE 200.0 A K1 149
1.3 PAN GS 025 MPW 150.0 A K1 135
1.3 PAN GS 025 MCE 150.0 A K1 149
1.9 PAN GS 025 MPW 100.0 A K1 90
1.9 PAN GS 025 MCE 100.0 A K1 149
2.6 PAN GS 025 MPW 075.0 A K1 68
2.6 PAN GS 025 MCE 075.0 A K1 159
3.2 PAN GS 025 MPW 060.0 A K1 54
3.2 PAN GS 025 MCE 060.0 A K1 159
2.8
3.8 PAN GS 025 MPW 050.0 A K1 45
3.8 PAN GS 025 MCE 050.0 A K1 159
6.4 PAN GS 025 MPW 030.0 A K1 27
6.4 PAN GS 025 MCE 030.0 A K1 159
7.8 PAN GS 025 MPW 020.0 A K1 18
7.8 PAN GS 025 MCE 020.0 A K1 159
7.8 PAN GS 025 MPW 015.0 A K1 13.5
7.8 PAN GS 025 MCE 015.0 A K1 159
7.8 PAN GS 025 MPW 012.5 A K1 11.3
7.8 PAN GS 025 MCE 012.5 A K1 159
7.8 PAN GS 025 MPW 010.0 A K1
9
7.8 PAN GS 025 MCE 010.0 A K1 159
7.8 PAN GS 025 MPW 008.3 A K1 7.5
7.8 PAN GS 025 MCE 008.3 A K1 159
Additional gearbox M8GA 10XM must be used for speeds of 7.5 r/min and below
7.8 PAN GS 025 MPW 007.5 A K1 6.8
7.8 PAN GS 025 MCE 007.5 A K1 186
7.8 PAN GS 025 MPW 006.0 A K1 5.4
7.8 PAN GS 025 MCE 006.0 A K1 186
7.8 PAN GS 025 MPW 005.0 A K1 4.5
7.8 PAN GS 025 MCE 005.0 A K1 186
7.8 PAN GS 025 MPW 003.0 A K1 2.7
7.8 PAN GS 025 MCE 003.0 A K1 186
7.8 PAN GS 025 MPW 002.0 A K1 1.8
7.8 PAN GS 025 MCE 002.0 A K1 186
2.9
7.8 PAN GS 025 MPW 001.5 A K1 1.4
7.8 PAN GS 025 MCE 001.5 A K1 186
7.8 PAN GS 025 MPW 001.3 A K1 1.1
7.8 PAN GS 025 MCE 001.3 A K1 186
7.8 PAN GS 025 MPW 001.0 A K1 0.9
7.8 PAN GS 025 MCE 001.0 A K1 186
7.8 PAN GS 025 MPW 000.8 A K1 0.8
7.8 PAN GS 025 MCE 000.8 A K1 186
* torque limiter recommended
1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 48.
25W
3 phase
67
32
11.5
1
75
30
MAX
26
10ø h7
ø82
ø30
4
15
CTRS
44
25
21
(66.5)
4xM5 ON 94 PCD
85
80
Variable speed operation
Panasonic G-series geared motors suit operation
with either the Panasonic Mirco-inverter or the Lenze
smd inverter. Both require only 1 phase mains input
to control 230V 3 phase motors.
Micro-Inverter
➤
➤
➤
➤
L
Nm
1.5
1.25
1.0
0.75
Very compact
Simple operation
30:1 speed range
Good torque performance
0.5
0.25
0
0
250
500
750
1000
1250 1500
see page 40
Lenze smd inverter
➤
➤
➤
➤
1750 2000
Speed (r/min.)
Motor speed-torque curve
1.5x overload for 60s
230 V
400 V
Integral RFI filter
Rated current
0.26 A
0.12 A
EPM memory chip
Starting current
0.68 A
0.31 A
250W version suits all G-series
Input power
53 W
51 W
Rated speed
1375r/min
1350r/min
See our website www.lenze.co.uk
Panasonic G-series
40W 3 phase
These 3 phase induction motors deliver high starting
torques. 400V versions suit fixed speed applications.
230V versions are ideal for use with inverters such as
the Panasonic Micro-Inverter.
➤ Rated 230V or 400V ± 10%
➤ Continuous duty S1
➤ Enclosure IP54
➤ Class E insulation
➤ Integrated thermal protection switch
➤
M9GA gearbox
(For external connection)
approved, UL on request
22
230V 3 phase Motor
400V 3 phase Motor
Model Number : M8MA40GKP4W1 Model Number : M8MA40GK4CE1
Nominal
speed
r/min
500
300
200
150
100
75
60
50
30
20
15
12.5
10
8.3
7.5
6.0
5.0
3.0
2.0
1.5
1.3
1.0
0.8
Gearbox
Actual Rated
Actual Rated
model
speed torque
Assembly
speed torque
Assembly
Length Weight
number
@230V Nm
number
@400V Nm
number
L
kg
M9GA 3B
458
0.66 PAN GS 040 MPW 500.0 A K1 458
0.63 PAN GS 040 MCE 500.0 A K1 179
M9GA 5B
275
1.1 PAN GS 040 MPW 300.0 A K1 275
1.1 PAN GS 040 MCE 300.0 A K1 179
M9GA 7.5B
183
1.6 PAN GS 040 MPW 200.0 A K1 183
1.6 PAN GS 040 MCE 200.0 A K1 179
M9GA 10B
138
2 PAN GS 040 MPW 150.0 A K1 138
1.9 PAN GS 040 MCE 150.0 A K1 179
M9GA 15B
92
3 PAN GS 040 MPW 100.0 A K1 92
2.9 PAN GS 040 MCE 100.0 A K1 179
M9GA 20B
69
4 PAN GS 040 MPW 075.0 A K1 69
3.9 PAN GS 040 MCE 075.0 A K1 197
M9GA 25B
55
5.1 PAN GS 040 MPW 060.0 A K1 55
4.9 PAN GS 040 MCE 060.0 A K1 197
4.0
M9GA 30B
46
6.1 PAN GS 040 MPW 050.0 A K1 46
5.9 PAN GS 040 MCE 050.0 A K1 197
M9GA 50B
27.5
9.8 PAN GS 040 MPW 030.0 A K1 27.5
9.8 PAN GS 040 MCE 030.0 A K1 197
M9GA 75B*
18.3
9.8 PAN GS 040 MPW 020.0 A K1 18.3
9.8 PAN GS 040 MCE 020.0 A K1 197
M9GA 100B* 13.8
9.8 PAN GS 040 MPW 015.0 A K1 13.8
9.8 PAN GS 040 MCE 015.0 A K1 197
M9GA 120B* 11.5
9.8 PAN GS 040 MPW 012.5 A K1 11.5
9.8 PAN GS 040 MCE 012.5 A K1 197
M9GA 150B*
9.2
9.8 PAN GS 040 MPW 010.0 A K1 9.2
9.8 PAN GS 040 MCE 010.0 A K1 197
M9GA 180B*
7.6
9.8 PAN GS 040 MPW 008.3 A K1 7.6
9.8 PAN GS 040 MCE 008.3 A K1 197
M9GA 10XM*
Additional gearbox M9GA 10XM must be used for speeds of 7.5 r/min and below
M9GA 20B*
6.9
9.8 PAN GS 040 MPW 007.5 A K1 6.9
9.8 PAN GS 040 MCE 007.5 A K1 229
M9GA 25B*
5.5
9.8 PAN GS 040 MPW 006.0 A K1 5.5
9.8 PAN GS 040 MCE 006.0 A K1 229
M9GA 30B*
4.6
9.8 PAN GS 040 MPW 005.0 A K1 4.6
9.8 PAN GS 040 MCE 005.0 A K1 229
M9GA 50B*
2.8
9.8 PAN GS 040 MPW 003.0 A K1 2.8
9.8 PAN GS 040 MCE 003.0 A K1 229
M9GA 75B*
1.8
9.8 PAN GS 040 MPW 002.0 A K1 1.8
9.8 PAN GS 040 MCE 002.0 A K1 229
4.7
M9GA 100B*
1.4
9.8 PAN GS 040 MPW 001.5 A K1 1.4
9.8 PAN GS 040 MCE 001.5 A K1 229
M9GA 120B*
1.1
9.8 PAN GS 040 MPW 001.3 A K1 1.1
9.8 PAN GS 040 MCE 001.3 A K1 229
M9GA 150B*
0.9
9.8 PAN GS 040 MPW 001.0 A K1 0.9
9.8 PAN GS 040 MCE 001.0 A K1 229
M9GA 180B*
0.8
9.8 PAN GS 040 MPW 000.8 A K1 0.8
9.8 PAN GS 040 MCE 000.8 A K1 229
* torque limiter recommended
1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 48.
40W
3 phase
67
32
13.5
1
75
30
MAX
27
ø12 h7
ø92
ø36
4
18
CTRS
44
25
23
(73.5)
4xM6 ON 104 PCD
105
90
Variable speed operation
L
Nm
1.5
Panasonic G-series geared motors suit operation
with either the Panasonic Mirco-inverter or the Lenze
smd inverter. Both require only 1 phase mains input
to control 230V 3 phase motors.
1.25
Micro-Inverter
0.75
➤
➤
➤
➤
1.0
Very compact
Simple operation
30:1 speed range
Good torque performance
0.5
0.25
0
0
250
500
see page 40
Lenze smd inverter
➤
➤
➤
➤
750
1000
1250 1500 1750 2000
Speed (r/min.)
Motor speed-torque curve
1.5x overload for 60s
230 V
400 V
Integral RFI filter
Rated current
0.33 A
0.15 A
EPM memory chip
Starting current
1.0 A
0.46 A
250W version suits all G-series
Input power
70 W
62 W
Rated speed
1375r/min
1350r/min
See our website www.lenze.co.uk
Panasonic G-series
60W 3 phase
These 3 phase induction motors deliver high starting
torques. 400V versions suit fixed speed applications.
230V versions are ideal for use with inverters such as
the Panasonic Micro-Inverter.
All 60W geared motors are available with flanged or
square gearboxes.
➤ Rated 230V or 400V ± 10%
➤ Continuous duty S1
➤ Enclosure IP54
➤ Class E insulation
➤ Integrated thermal protection switch
24
➤
Flanged M9GC
gearbox
Square M9GD
gearbox
(For external connection)
approved, UL on request
Ordering specification and example
Replace the letter # from the assembly number with a ‘C’ for flanged gearbox or ‘D’ for
square gearbox as required. Examples:
100 r/min flanged with 230V 3 phase motor
5 r/min square with 400V 3 phase motor
PAN GS 060 MPW 100.0 C K1
PAN GS 060 MCE 005.0 D K1
See page 48 for terminal box positions and feet.
230V 3 phase Motor
400V 3 phase Motor
Model Number : M9MC60GKP4W1 Model Number : M9MC60GK4CE1
Nominal
speed
r/min
500
300
200
150
100
75
60
50
30
20
15
12.5
10
7.5
7.5
6.0
5.0
3.0
2.0
1.5
1.3
1.0
0.8
Gearbox
Actual
model
speed
number
@230V
M9G# 3B
458
M9G# 5B
275
M9G# 7.5B
183
M9G# 10B
138
M9G# 15B
92
M9G# 20B
69
M9G# 25B
55
M9G# 30B
46
M9G# 50B
27.5
M9G# 75B*
18.3
M9G# 100B* 13.8
M9G# 120B* 11.5
M9G# 150B*
9.2
M9G# 200B*
7.6
M9GC 10XM*
M9G# 20B*
6.9
M9G# 25B*
5.5
M9G# 30B*
4.6
M9G# 50B*
2.8
M9G# 75B*
1.8
M9G# 100B*
1.4
M9G# 120B*
1.1
M9G# 150B*
0.9
M9G# 200B*
0.8
Rated
Actual Rated
torque
Assembly
speed torque
Assembly
Length Weight
Nm
number
@400V Nm
number
L
kg
1
PAN GS 060 MPW 500.0 # K1 458
1 PAN GS 060 MCE 500.0 # K1 225
1.7 PAN GS 060 MPW 300.0 # K1 275
1.71 PAN GS 060 MCE 300.0 # K1 225
2.5 PAN GS 060 MPW 200.0 # K1 183
2.5 PAN GS 060 MCE 200.0 # K1 225
3.1 PAN GS 060 MPW 150.0 # K1 138
3.1 PAN GS 060 MCE 150.0 # K1 225
4.6 PAN GS 060 MPW 100.0 # K1 92
4.6 PAN GS 060 MCE 100.0 # K1 225
5.7 PAN GS 060 MPW 075.0 # K1 69
5.7 PAN GS 060 MCE 075.0 # K1 225
7.2 PAN GS 060 MPW 060.0 # K1 55
7.2 PAN GS 060 MCE 060.0 # K1 225
4.5
8.6 PAN GS 060 MPW 050.0 # K1 46
8.6 PAN GS 060 MCE 050.0 # K1 225
14.4 PAN GS 060 MPW 030.0 # K1 27.5
14.4 PAN GS 060 MCE 030.0 # K1 225
19.6 PAN GS 060 MPW 020.0 # K1 18.3
19.6 PAN GS 060 MCE 020.0 # K1 225
19.6 PAN GS 060 MPW 015.0 # K1 13.8
19.6 PAN GS 060 MCE 015.0 # K1 225
19.6 PAN GS 060 MPW 012.5 # K1 11.5
19.6 PAN GS 060 MCE 012.5 # K1 225
19.6 PAN GS 060 MPW 010.0 # K1 9.2
19.6 PAN GS 060 MCE 010.0 # K1 225
19.6 PAN GS 060 MPW 008.3 # K1 7.6
19.6 PAN GS 060 MCE 008.3 # K1 225
Additional gearbox M9GC 10XB must be used for speeds of 7.5 r/min and below
19.6 PAN GS 060 MPW 007.5 # K1 6.9
19.6 PAN GS 060 MCE 007.5 # K1 265
19.6 PAN GS 060 MPW 006.0 # K1 5.5
19.6 PAN GS 060 MCE 006.0 # K1 265
19.6 PAN GS 060 MPW 005.0 # K1 4.6
19.6 PAN GS 060 MCE 005.0 # K1 265
19.6 PAN GS 060 MPW 003.0 # K1 2.8
19.6 PAN GS 060 MCE 003.0 # K1 265
19.6 PAN GS 060 MPW 002.0 # K1 1.8
19.6 PAN GS 060 MCE 002.0 # K1 265
5.1
19.6 PAN GS 060 MPW 001.5 # K1 1.4
19.6 PAN GS 060 MCE 001.5 # K1 265
19.6 PAN GS 060 MPW 001.3 # K1 1.1
19.6 PAN GS 060 MCE 001.3 # K1 265
19.6 PAN GS 060 MPW 001.0 # K1 0.9
19.6 PAN GS 060 MCE 001.0 # K1 265
19.6 PAN GS 060 MPW 000.8 # K1 0.8
19.6 PAN GS 060 MCE 000.8 # K1 265
HIGHER TORQUES – available from 30 r/min and slower speeds, see following 60W high torque pages.
* torque limiter recommended
1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 48.
60W
3 phase
1
67
5
38
30
MAX
75
12
92
Ø34
Ø34
36
60
(73.5)
18
Ø15 h7
17
44
29
25
31
4 HOLES Ø8.5
90
110
130
4 x M6 ON 104 PCD
120
D
25
L
67
1
5
38
29
25
92
Ø34
Ø34
(73.5)
18
Ø15 h7
17
4 x M6
ON 104 P.C.D.
30
MAX
75
31
120
90
L
Variable speed operation
Nm
1.5
Panasonic G-series geared motors suit operation
with either the Panasonic Mirco-inverter or the Lenze
smd inverter. Both require only 1 phase mains input
to control 230V 3 phase motors.
1.25
Micro-Inverter
0.75
➤
➤
➤
➤
1.0
Very compact
Simple operation
30:1 speed range
Good torque performance
0.5
0.25
0
0
250
500
see page 40
Lenze smd inverter
➤
➤
➤
➤
750
1000 1250 1500 1750 2000
Speed (r/min.)
Motor speed-torque curve
1.5x overload for 60s
230 V
400 V
Integral RFI filter
Rated current
0.46 A
0.21 A
EPM memory chip
Starting current
1.5 A
0.70 A
250W version suits all G-series
Input power
103 W
94 W
Rated speed
1375r/min
1375r/min
See our website www.lenze.co.uk
Panasonic G-series
60 HT 3 phase
For speeds of 30 r/min and below a high torque gearbox
is available to give torque up to 29.4 Nm.
These 3 phase induction motors deliver high starting
torques. 400V versions suit fixed speed applications.
230V versions are ideal for use with inverters such as
the Panasonic Micro-Inverter.
Flanged M9GS
gearbox
All 60W geared motors are available with flanged or
square gearboxes.
➤ Rated 230V or 400V ± 10%
➤ Continuous duty S1
➤ Enclosure IP54
➤ Class E insulation
➤ Integrated thermal protection switch
26
➤
Square M9GT
gearbox
(For external connection)
approved, UL on request
Ordering specification and example
Replace the letter # from the assembly number with a ‘S’ for flanged gearbox or ‘T’ for
square gearbox as required. Examples:
30 r/min flanged with 230V 3 phase motor
1.5 r/min square with 400V 3 phase motor
PAN GS 060 MPW 030.0 S K1
PAN GS 060 MCE 001.5 T K1
See page 48 for terminal box positions and feet.
230V 3 phase Motor
400V 3 phase Motor
Model Number : M9MC60GKP4W1 Model Number : M9MC60GK4CE1
Nominal
speed
r/min
30
20
15
12.5
10
7.5
3.0
2.0
1.5
1.3
1.0
0.8
Gearbox
Actual Rated
Actual Rated
model
speed torque
Assembly
speed torque
Assembly
Length Weight
number
@230V Nm
number
@400V Nm
number
L
kg
M9G# 50B
27.5
14.4 PAN GS 060 MPW 030.0 # K1 27.5
14.4 PAN GS 060 MCE 030.0 # K1 225
M9G# 75B*
18.3
20 PAN GS 060 MPW 020.0 # K1 18.3
20 PAN GS 060 MCE 020.0 # K1 225
M9G# 100B* 13.8
26.7 PAN GS 060 MPW 015.0 # K1 13.8
26.7 PAN GS 060 MCE 015.0 # K1 225
4.9
M9G# 120B* 11.5
29.6 PAN GS 060 MPW 012.5 # K1 11.5
29.6 PAN GS 060 MCE 012.5 # K1 225
M9G# 150B*
9.2
29.6 PAN GS 060 MPW 010.0 # K1 9.2
29.6 PAN GS 060 MCE 010.0 # K1 225
M9G# 200B*
6.9
29.6 PAN GS 060 MPW 007.5 # K1 6.9
29.6 PAN GS 060 MCE 007.5 # K1 265
M9GC 10XM*
Additional gearbox M9GC 10XB must be used for speeds of 7.5 r/min and below
M9G# 50B*
2.8
29.6 PAN GS 060 MPW 003.0 # K1 2.8
29.6 PAN GS 060 MCE 003.0 # K1 265
M9G# 75B*
1.8
29.6 PAN GS 060 MPW 002.0 # K1 1.8
29.6 PAN GS 060 MCE 002.0 # K1 265
5.5
M9G# 100B*
1.4
29.6 PAN GS 060 MPW 001.5 # K1 1.4
29.6 PAN GS 060 MCE 001.5 # K1 265
M9G# 120B*
1.1
29.6 PAN GS 060 MPW 001.3 # K1 1.1
29.6 PAN GS 060 MCE 001.3 # K1 265
M9G# 150B*
0.9
29.6 PAN GS 060 MPW 001.0 # K1 0.9
29.6 PAN GS 060 MCE 001.0 # K1 265
M9G# 180B*
0.8
29.6 PAN GS 060 MPW 000.8 # K1 0.8
29.6 PAN GS 060 MCE 000.8 # K1 265
HIGHER SPEEDS – see the 60W and 90W selections on adjacent pages
* torque limiter recommended
1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 48.
60W
3 phase
high torque
67
1
45
6
75
30
MAX
12
92
Ø40
36
60
(73.5)
18
CTRS
44
Ø18 h7
20.5
35
30
38
4 HOLES Ø8.5
120
90
110
130
L
67
1
45
35
6
75
30
MAX
12
Ø18 h7
20.5
30
92
Ø40
(73.5)
18
CTRS
44
4 HOLES Ø8.5
ON 104 P.C.D.
27
38
90
120
L
Variable speed operation
Nm
1.5
Panasonic G-series geared motors suit operation
with either the Panasonic Mirco-inverter or the Lenze
smd inverter. Both require only 1 phase mains input
to control 230V 3 phase motors.
1.25
Micro-Inverter
0.75
➤
➤
➤
➤
1.0
Very compact
Simple operation
30:1 speed range
Good torque performance
0.5
0.25
0
0
250
500
see page 40
Lenze smd inverter
➤
➤
➤
➤
750
1000 1250 1500 1750 2000
Speed (r/min.)
Motor speed-torque curve
1.5x overload for 60s
230 V
400 V
Integral RFI filter
Rated current
0.46 A
0.21 A
EPM memory chip
Starting current
1.5 A
0.70 A
250W version suits all G-series
Input power
103 W
94 W
Rated speed
1375r/min
1375r/min
See our website www.lenze.co.uk
Panasonic G-series
90W 3 phase
These 3 phase induction motors deliver high starting
torques. 400V versions suit fixed speed applications.
230V versions are ideal for use with inverters such as
the Panasonic Micro-Inverter.
Flanged M9GC
gearbox
All 90W geared motors are available with flanged or
square gearboxes.
➤ Rated 230V ± 10%
➤ Continuous duty S1
➤ Enclosure IP54 (cable downwards)
➤ Class E insulation
➤ Integrated thermal protection switch
28
➤
(For external connection)
approved, UL on request
Square M9GD
gearbox
Ordering specification and example
Replace the letter # from the assembly number with a ‘C’ for flanged gearbox or ‘D’ for
square gearbox as required. Examples:
100 r/min flanged with 230V 3 phase motor
5 r/min square with 400V 3 phase motor
PAN GS 100.0 MPW 100.0 C K1
PAN GS 100.0 MCE 005.0 D K1
See page 48 for terminal box positions and feet.
230V 3 phase Motor
400V 3 phase Motor
Model Number : M9MC90GKP4W1 Model Number : M9MC90GK4CE1
Nominal
speed
r/min
500
300
200
150
100
75
60
50
30
20
15
12.5
10
7.5
6.0
5.0
Gearbox
Actual Rated
Actual Rated
model
speed torque
Assembly
speed torque
Assembly
Length Weight
number
@230V Nm
number
@400V Nm
number
L
kg
M9G# 3B
458
1.5 PAN GS 060 MPW 500.0 # K1 458
1.4 PAN GS 060 MCE 500.0 # K1 240
M9G# 5B
275
2.5 PAN GS 060 MPW 300.0 # K1 275
2.4 PAN GS 060 MCE 300.0 # K1 240
M9G# 7.5B
183
3.8 PAN GS 060 MPW 200.0 # K1 183
3.5 PAN GS 060 MCE 200.0 # K1 240
M9G# 10B
138
4.7 PAN GS 060 MPW 150.0 # K1 138
4.4 PAN GS 060 MCE 150.0 # K1 240
M9G# 15B
92
7
PAN GS 060 MPW 100.0 # K1 92
6.5 PAN GS 060 MCE 100.0 # K1 240
M9G# 20B
69
8.7 PAN GS 060 MPW 075.0 # K1 69
8.1 PAN GS 060 MCE 075.0 # K1 240
M9G# 25B
55
10.8 PAN GS 060 MPW 060.0 # K1 55
10.2 PAN GS 060 MCE 060.0 # K1 240
4.8
M9G# 30B
46
13.0 PAN GS 060 MPW 050.0 # K1 46
12.2 PAN GS 060 MCE 050.0 # K1 240
M9G# 50B
27.5
19.6 PAN GS 060 MPW 030.0 # K1 27.5
19.6 PAN GS 060 MCE 030.0 # K1 240
M9G# 75B*
18.3
19.6 PAN GS 060 MPW 020.0 # K1 18.3
19.6 PAN GS 060 MCE 020.0 # K1 240
M9G# 100B* 13.8
19.6 PAN GS 060 MPW 015.0 # K1 13.8
19.6 PAN GS 060 MCE 015.0 # K1 240
M9G# 120B* 11.5
19.6 PAN GS 060 MPW 012.5 # K1 11.5
19.6 PAN GS 060 MCE 012.5 # K1 240
M9G# 150B*
9.2
19.6 PAN GS 060 MPW 010.0 # K1 9.2
19.6 PAN GS 060 MCE 010.0 # K1 240
M9G# 200B*
6.9
19.6 PAN GS 060 MPW 007.5 # K1 6.9
19.6 PAN GS 060 MCE 007.5 # K1 240
M9GC 10XM*
Additional gearbox M9GC 10XB must be used for speeds of 7.5 r/min and below
M9G# 25B*
5.5
19.6 PAN GS 060 MPW 006.0 # K1 5.5
19.6 PAN GS 060 MCE 006.0 # K1 280
5.4
M9G# 30B*
4.6
19.6 PAN GS 060 MPW 005.0 # K1 4.6
19.6 PAN GS 060 MCE 005.0 # K1 280
HIGHER TORQUES – available from 20 r/min and slower, see previous 60W high torque pages.
* torque limiter recommended
1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 48.
90W
3 phase
1
67
5
38
30
MAX
75
12
92
Ø34
36
60
(73.5)
18
Ø15 h7
17
44
29
25
31
4 HOLES Ø8.5
90
110
130
135
4 x M6 ON 104 PCD
29
L
1
67
5
75
92
Ø34
(73.5)
18
Ø15 h7
4 x M6
ON 104 P.C.D.
17
38
29
25
30
MAX
31
135
90
L
Variable speed operation
Nm
1.5
Panasonic G-series geared motors suit operation
with either the Panasonic Mirco-inverter or the Lenze
smd inverter. Both require only 1 phase mains input
to control 230V 3 phase motors.
1.25
Micro-Inverter
0.75
➤
➤
➤
➤
1.0
Very compact
Simple operation
30:1 speed range
Good torque performance
0.5
0.25
0
0
250
500
see page 40
Lenze smd inverter
➤
➤
➤
➤
750
1000 1250 1500 1750 2000
Speed (r/min.)
Motor speed-torque curve
1.5x overload for 60s
230 V
400 V
Integral RFI filter
Rated current
0.70 A
0.30 A
EPM memory chip
Starting current
2.2 A
0.95 A
250W version suits all G-series
Input power
145 W
132 W
Rated speed
1375r/min
1350r/min
See our website www.lenze.co.uk
Panasonic G-series
6W
1 phase
braked
geared brake motors
Brake motors feature a spring applied electromagnetic
brake suitable for fast stop and holding torques.
The brake is operated from mains supply connections.
Up to six stops/starts per minute are possible.
M6GA gearbox
➤ Rated 230V ± 10% and 50 Hz
➤ Continuous duty S1
➤ Enclosure IP22 (cable downloads)
➤ Class E insulation
➤ Supplied with 0.6µF run capacitor
➤ Thermal protection by impedance
30
➤
current limiting
approved, UL on request
1 phase Brake Motor
Model Number : M6RA6GB4GE
Nominal
speed
r/min
500
300
200
150
100
75
60
50
30
20
15
12.5
10
8.3
Gearbox
Actual Rated Braking
model
speed torque torque
Assembly
Length
number
@230V
Nm
Nm
number
L
M6GA 3B
408
0.11
0.12 PAN GS 006 BGE 500.0 A L1 173
M6GA 5B
245
0.18
0.2 PAN GS 006 BGE 300.0 A L1 173
M6GA 7.5B
163
0.27
0.3 PAN GS 006 BGE 200.0 A L1 173
M6GA 10B
123
0.33
0.37 PAN GS 006 BGE 150.0 A L1 173
M6GA 15B
82
0.5
0.55 PAN GS 006 BGE 100.0 A L1 173
M6GA 20B
61
0.66
0.75 PAN GS 006 BGE 075.0 A L1 182
M6GA 25B
49
0.83
0.92 PAN GS 006 BGE 060.0 A L1 182
M6GA 30B
41
1.0
1.1 PAN GS 006 BGE 050.0 A L1 182
M6GA 50B
25
1.7
1.84 PAN GS 006 BGE 030.0 A L1 182
M6GA 75B*
16.3
2.3
2.5 PAN GS 006 BGE 020.0 A L1 182
M6GA 100B* 12.3
2.5
2.5 PAN GS 006 BGE 015.0 A L1 182
M6GA 120B* 10.2
2.5
2.5 PAN GS 006 BGE 012.5 A L1 182
M6GA 150B*
8.2
2.5
2.5 PAN GS 006 BGE 010.0 A L1 182
M6GA 180B*
6.8
2.5
2.5 PAN GS 006 BGE 008.3 A L1 182
Weight
kg
1.01
Motor details
Rated current
Starting current
Input power
Rated speed
0.10A
1.12A
22W
1225r/min
* torque limiter recommended
1 signifies standard leadwire position 1 as shown. For further mounting positions please see page 48.
BRAKE CABLE 300mm
MOTOR CABLE 300mm
32
26
ø62
ø25
12
ø8 h7
7
CTRS
10
4xM4 ON 70 PCD
(49.5)
7
42
115
60
L
3
Panasonic G-series
15W
1 phase
braked
geared brake motors
Brake motors feature a spring applied electromagnetic
brake suitable for fast stop and holding torques.
The brake is operated from mains supply connections.
Up to six stops/starts per minute are possible.
M7GA gearbox
➤ Rated 230V ± 10% and 50 Hz
➤ Continuous duty S1
➤ Enclosure IP22 (cable downloads)
➤ Class E insulation
➤ Supplied with 1.2µF run capacitor
➤ Integrated thermal protection switch
➤
31
(For external connection)
approved, UL on request
1 phase Brake Motor
Model Number : M7RA15GB4GE
Nominal
speed
r/min
500
300
200
150
100
75
60
50
30
20
15
12.5
10
8.3
Gearbox
Actual Rated Braking
model
speed torque torque
Assembly
Length
number
@230V
Nm
Nm
number
L
M7GA 3B
408
0.27
0.19 PAN GS 015 BGE 500.0 A L1 184
M7GA 5B
245
0.45
0.32 PAN GS 015 BGE 300.0 A L1 184
M7GA 7.5B
163
0.67
0.47 PAN GS 015 BGE 200.0 A L1 184
M7GA 10B
123
0.83
0.59 PAN GS 015 BGE 150.0 A L1 184
M7GA 15B
82
1.24
0.88 PAN GS 015 BGE 100.0 A L1 184
M7GA 20B
61
1.65
1.17 PAN GS 015 BGE 075.0 A L1 194
M7GA 25B
49
2.1
1.46 PAN GS 015 BGE 060.0 A L1 194
M7GA 30B
41
2.5
1.8 PAN GS 015 BGE 050.0 A L1 194
M7GA 50B
25
4.1
2.9 PAN GS 015 BGE 030.0 A L1 194
M7GA 75B*
16.3
4.9
4.1 PAN GS 015 BGE 020.0 A L1 194
M7GA 100B* 12.3
4.9
4.9 PAN GS 015 BGE 015.0 A L1 194
M7GA 120B* 10.2
4.9
4.9 PAN GS 015 BGE 012.5 A L1 194
M7GA 150B*
8.2
4.9
4.9 PAN GS 015 BGE 010.0 A L1 194
M7GA 180B*
6.8
4.9
4.9 PAN GS 015 BGE 008.3 A L1 194
Weight
kg
Motor details
Rated current
Starting current
Input power
Rated speed
1.64
0.17A
1.24A
38W
1225r/min
* torque limiter recommended
1 signifies standard leadwire position 1 as shown. For further mounting positions please see page 48.
MOTOR CABLE 300mm
BRAKE CABLE 300mm
ø10 h7
32
27
11.5
(58)
70
ø72
ø30
4
15
CTRS
4xM5 ON 82 PCD
25
7
42
120
L
3
Panasonic G-series
geared brake motors
25W
braked
Brake motors feature a spring applied electromagnetic
brake suitable for fast stop and holding torques.
The brake is operated from mains supply connections.
Up to six stops/starts per minute are possible.
M8GA gearbox
➤ Rated 230V ± 10% and 50 Hz
➤ Continuous duty S1
➤ Enclosure IP44
➤ Class E insulation
➤ Supplied phase model supplied with
32
➤
➤
1.8µF run capcitor
Integrated thermal protection switch
(For external connection)
approved, UL on request
1 phase Brake Motor
Model Number : M8RA25GBK4GE
Nominal
speed
r/min
500
300
200
150
100
75
60
50
30
20
15
12.5
10
8.3
Gearbox
Actual
model
speed
number
@230V
M8GA 3B
417
M8GA 5B
150
M8GA 7.5B
167
M8GA 10B
125
M8GA 15B
83
M8GA 20B
63
M8GA 25B
50
M8GA 30B
42
M8GA 50B
255
M8GA 75B*
16.7
M8GA 100B* 12.5
M8GA 120B* 10.4
M8GA 150B*
8.3
M8GA 180B*
6.9
3 phase Brake Motor
Model Number : M8MA25GBK4W1
Rated Braking
Actual Rated Braking
torque torque
Assembly
speed torque torque
Assembly
Length
Nm
Nm
number
@230V
Nm
Nm
number
L
0.46
0.24 PAN GS 025 BGE 500.0 A K1 458
0.41
0.24 PAN GS 025 BPW 500.0 A K1 194
0.77
0.4 PAN GS 025 BGE 300.0 A K1 275
0.69
0.4 PAN GS 025 BPW 300.0 A K1 194
1.15
0.6 PAN GS 025 BGE 200.0 A K1 183
1
0.6 PAN GS 025 BPW 200.0 A K1 194
1.4
0.74 PAN GS 025 BGE 150.0 A K1 138
1.3
0.74 PAN GS 025 BPW 150.0 A K1 194
2.1
1.1 PAN GS 025 BGE 100.0 A K1 92
1.9
1.1 PAN GS 025 BPW 100.0 A K1 194
2.9
1.5 PAN GS 025 BGE 075.0 A K1 69
2.6
1.5 PAN GS 025 BPW 075.0 A K1 204
3.6
1.8 PAN GS 025 BGE 060.0 A K1 55
3.2
1.8 PAN GS 025 BPW 060.0 A K1 204
4.3
2.2 PAN GS 025 BGE 050.0 A K1 46
3.8
2.2 PAN GS 025 BPW 050.0 A K1 204
7.1
3.7 PAN GS 025 BGE 030.0 A K1 27.5
6.4
3.7 PAN GS 025 BPW 030.0 A K1 204
7.8
5.2 PAN GS 025 BGE 020.0 A K1 18.3
7.8
5.2 PAN GS 025 BPW 020.0 A K1 204
7.8
6.9 PAN GS 025 BGE 015.0 A K1 13.8
7.8
6.9 PAN GS 025 BPW 015.0 A K1 204
7.8
7.8 PAN GS 025 BGE 012.5 A K1 11.5
7.8
7.8 PAN GS 025 BPW 012.5 A K1 204
7.8
7.8 PAN GS 025 BGE 010.0 A K1 9.2
7.8
7.8 PAN GS 025 BPW 010.0 A K1 204
7.8
7.8 PAN GS 025 BGE 008.3 A K1 7.6
7.8
7.8 PAN GS 025 BPW 008.3 A K1 204
Geared motor weight = 2.8kg
* torque limiter recommended
1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 48.
Motor details:
1 phase rated current 0.25A, starting current 0.43A, rated speed 1250r/min
67
32
26
30 BRAKE CABLE 300mm
MAX
75
10ø h7
1
(66.5)
4xM5 ON 94 PCD
ø82
ø30
4
15
CTRS
44
11.5
25
7.5
48
130
80
L
2
Panasonic G-series
geared brake motors
40W
braked
Brake motors feature a spring applied electromagnetic
brake suitable for fast stop and holding torques.
The brake is operated from mains supply connections.
Up to six stops/starts per minute are possible.
M9GA gearbox
➤ Rated 230V ± 10% and 50 Hz
➤ 1 phase models intermittent duty S2
3 phase models, continuous duty S1
➤ Enclosure IP44
➤ Class E insulation
➤ Supplied phase model supplied with
➤
➤
33
3.0µF run capcitor
Integrates thermal protection switch
(For external connection)
approved, UL on request
1 phase Brake Motor
Model Number : M9RA40GBK4GE
Nominal
speed
r/min
500
300
200
150
100
75
60
50
30
20
15
12.5
10
8.3
Gearbox
Actual
model
speed
number
@230V
M9GA 3B
392
M9GA 5B
235
M9GA 7.5B
157
M9GA 10B
118
M9GA 15B
78
M9GA 20B
59
M9GA 25B
47
M9GA 30B
39
M9GA 50B*
23.5
M9GA 75B*
15.7
M9GA 100B* 11.8
M9GA 120B*
9.8
M9GA 150B*
7.8
M9GA 180B*
6.5
3 phase Brake Motor
Model Number : M9MA40GBK4W1
Rated Braking
Actual Rated Braking
torque torque
Assembly
speed torque torque
Assembly
Length
Nm
Nm
number
@230V Nm
Nm
number
L
0.8
0.48 PAN GS 040 BGE 500.0 A L1 458
0.66
0.48 PAN GS 040 BPW 500.0 A L1 227
1.34
0.79 PAN GS 040 BGE 300.0 A L1 275
1.1
0.79 PAN GS 040 BPW 300.0 A L1 227
2
1.19 PAN GS 040 BGE 200.0 A L1 183
1.6
1.19 PAN GS 040 BPW 200.0 A L1 227
2.48
1.47 PAN GS 040 BGE 150.0 A L1 138
2
1.47 PAN GS 040 BPW 150.0 A L1 227
3.7
2.2 PAN GS 040 BGE 100.0 A L1 92
3
2.2 PAN GS 040 BPW 100.0 A L1 227
5
2.9 PAN GS 040 BGE 075.0 A L1 69
4
2.9 PAN GS 040 BPW 075.0 A L1 245
5.8
3.7 PAN GS 040 BGE 060.0 A L1 55
5.1
3.7 PAN GS 040 BPW 060.0 A L1 245
7.0
4.4 PAN GS 040 BGE 050.0 A L1 46
6.1
4.4 PAN GS 040 BPW 050.0 A L1 245
9.8
7.3 PAN GS 040 BGE 030.0 A L1 27.5
9.8
7.3 PAN GS 040 BPW 030.0 A L1 245
9.8
9.8 PAN GS 040 BGE 020.0 A L1 18.3
9.8
9.8 PAN GS 040 BPW 020.0 A L1 245
9.8
9.8 PAN GS 040 BGE 015.0 A L1 13.8
9.8
9.8 PAN GS 040 BPW 015.0 A L1 245
9.8
9.8 PAN GS 040 BGE 012.5 A L1 11.5
9.8
9.8 PAN GS 040 BPW 012.5 A L1 245
9.8
9.8 PAN GS 040 BGE 010.0 A L1 9.2
9.8
9.8 PAN GS 040 BPW 010.0 A L1 245
9.8
9.8 PAN GS 040 BGE 008.3 A L1 7.6
9.8
9.8 PAN GS 040 BPW 008.3 A L1 245
Geared motor weight = 4.0kg
* torque limiter recommended
1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 48.
Motor details:
1 phase rated current 0.25A, starting current 0.43A, rated speed 1250r/min
67
32
27
(73.5)
90
75
BRAKE CABLE 300mm
30
MAX
ø12 h7
1
4xM6 ON 104 PCD
ø92
ø36
4
18
CTRS
44
13.5
25
7.5
50
152
L
Panasonic G-series
60W Braked Motor
Brake motors feature a spring applied electromagnetic
brake suitable for emergency stop and holding torques.
Flanged M9GC
gearbox
The brake is operated from mains supply connections.
Up to six stops/starts per minute are possible. Flanged
and square gearboxes are available.
230V 1 phase versions are available for fixed applications. 230V 3 phase versions are available for variable
speed applications when used with the Panasonic
micro-Inverter or Lenze smd inverter.
➤ Rated 230V ± 10% and 50 Hz
➤ Continuous duty S1
➤ Enclosure IP44
➤ Class E insulation
➤ Supplied phase model supplied with
34
➤
➤
Square M9GD
gearbox
5.0µF run capcitor
Integrated thermal protection switch
(For external connection)
approved, UL on request
Ordering specification and example
Replace the letter # from the assembly number with a ‘C’ for flanged gearbox or ‘D’ for
square gearbox as required. Examples:
100 r/min flanged with 1 phase brake motor
10 r/min square with 3 phase brake motor
PAN GS 060 BGE 100.0 C K1
PAN GS 060 BPW 010.0 D K1
See page 48 for terminal box positions and feet.
1 phase Brake Motor
Model Number : M9RC60GBK4GE
Nominal
speed
r/min
500
300
200
150
100
75
60
50
30
20
15
12.5
10
7.5
Gearbox
Actual
model
speed
number
@230V
M9G# 3B
433
M9G# 5B
260
M9G# 7.5B
173
M9G# 10B
130
M9G# 15B
87
M9G# 20B
65
M9G# 25B
52
M9G# 30B
43
M9G# 50B
26
M9G# 75B*
17.3
M9G# 100B*
13
M9G# 120B* 10.8
M9G# 150B*
8.7
M9G# 200B*
6.5
3 phase Brake Motor
Model Number : M9MC60GBK4W1
Rated Braking
Actual Rated Braking
torque torque
Assembly
speed torque torque
Assembly
Length
Nm
Nm
number
@230V Nm
Nm
number
L
1.1
0.95 PAN GS 060 BGE 500.0 # K1 458
1
0.95 PAN GS 060 BPW 500.0 # K1 274
1.9
1.59 PAN GS 060 BGE 300.0 # K1 275
1.7
1.59 PAN GS 060 BPW 300.0 # K1 274
2.9
2.4 PAN GS 060 BGE 200.0 # K1 183
2.5
2.4 PAN GS 060 BPW 200.0 # K1 274
3.5
2.9 PAN GS 060 BGE 150.0 # K1 138
3.1
2.9 PAN GS 060 BPW 150.0 # K1 274
5.3
4.4 PAN GS 060 BGE 100.0 # K1 92
4.6
4.4 PAN GS 060 BPW 100.0 # K1 274
6.6
5.5 PAN GS 060 BGE 075.0 # K1 69
5.7
5.5 PAN GS 060 BPW 075.0 # K1 274
8.2
6.9 PAN GS 060 BGE 060.0 # K1 55
7.2
6.9 PAN GS 060 BPW 060.0 # K1 274
9.9
8.2 PAN GS 060 BGE 050.0 # K1 46
8.6
8.2 PAN GS 060 BPW 050.0 # K1 274
16.5
13.7 PAN GS 060 BGE 030.0 # K1 27.5
14.4
13.7 PAN GS 060 BPW 030.0 # K1 274
19.6
19.1 PAN GS 060 BGE 020.0 # K1 18.3
19.6
19.1 PAN GS 060 BPW 020.0 # K1 274
19.6
19.6 PAN GS 060 BGE 015.0 # K1 13.8
19.6
19.6 PAN GS 060 BPW 015.0 # K1 274
19.6
19.6 PAN GS 060 BGE 012.5 # K1 11.5
19.6
19.6 PAN GS 060 BPW 012.5 # K1 274
19.6
19.6 PAN GS 060 BGE 010.0 # K1 9.2
19.6
19.6 PAN GS 060 BPW 010.0 # K1 274
19.6
19.6 PAN GS 060 BGE 007.5 # K1 6.9
19.6
19.6 PAN GS 060 BPW 007.5 # K1 274
HIGHER TORQUES – available from 30 r/min and slower, see following 60W high torque pages.
Geared motor weight = 4.5kg
* torque limiter recommended
1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 48.
60W
braked
38
31
29
67
1
75
30
MAX
BRAKE CABLE 300mm
92
ø34
36
60
(73.5)
ø34
CTRS
18
12
ø15 h7
17
44
5
4xø8.5
4xM6 ON
D 104 PCD
90
110
130
25
169
35
274
90
67
Ø34
1
5
38
75
30
MAX
67
BRAKE CABLE 300mm
17
92
136
18
29
25
4 X M6
ON 104 P.C.D.
Ø15
h7
7
169
274
1 phase motors
3 phase motors
Nm
0.7
Nm
1.5
0.6
1.25
0.5
1.0
0.4
0.75
0.3
0.2
0.5
0.1
0.25
0
0
500
1000
1500
2000
Speed (r/min.)
Motor speed-torque curve
0
0
250
500
750
1000 1250 1500 1750 2000
Speed (r/min.)
Motor speed-torque curve
230 V
230 V
Rated current
0.57 A
Rated current
0.46 A
Starting current
1.05 A
Starting current
1.5 A
Input power
127 W
Input power
103 W
Rated speed
1300 r/min
Rated speed
1375 r/min
Panasonic G-series
60W HT Braked Motor
Brake motors feature a spring applied electromagnetic
brake suitable for emergency stop and holding torques.
The brake is operated from mains supply connections.
Up to six stops/starts per minute are possible. Flanged
and square gearboxes are available.
Flanged M9GS
gearbox
230V 1 phase versions are available for fixed applications. 230V 3 phase versions are available for variable
speed applications when used with the Panasonic
micro-Inverter or Lenze smd inverter.
➤ Rated 230V ± 10% and 50 Hz
➤ Intermittent duty S1
➤ Enclosure IP44
➤ Class E insulation
➤ Supplied with 5.0µF run capcitor
➤ Single phase models supplied with
36
Square M9GT
gearbox
5.0µF run capcitor
➤ Integrated thermal protection switch
➤
(For external connection)
approved, UL on request
Ordering specification and example
Replace the letter # from the assembly number with a ‘S’ for flanged gearbox or ‘T’ for
square gearbox as required. Examples:
30 r/min 1 phase flanged brake motor
7.5 r/min 3 phase square brake motor motor
PAN GS 060 BGE 030.0 S K1
PAN GS 060 BPW 007.5 T K1
See page 48 for terminal box positions and feet.
1 phase Brake Motor
Model Number : M9RC60BGK4GE
Nominal
speed
r/min
30
20
15
12.5
10
7.5
Gearbox
Actual
model
speed
number
@230V
M9G# 50B
26
M9G# 75B*
17.3
M9G# 100B*
13
M9G# 120B* 10.8
M9G# 150B*
8.7
M9G# 200B*
6.5
3 phase Brake Motor
Model Number : M9MC60GBK4W1
Rated Braking
Actual Rated Braking
torque torque
Assembly
speed torque torque
Assembly
Length
Nm
Nm
number
@230V
Nm
Nm
number
L
15.4
13.7 PAN GS 060 BGE 030.0 # K1 27.5
14.4
13.7 PAN GS 060 BPW 030.0 # K1 301
21.5
19.1 PAN GS 060 BGE 020.0 # K1 18.3
19.1
19.1 PAN GS 060 BPW 020.0 # K1 301
28.6
25.5 PAN GS 060 BGE 015.0 # K1 13.8
25.5
25.5 PAN GS 060 BPW 015.0 # K1 301
29.4
29.4 PAN GS 060 BGE 012.5 # K1 11.5
29.4
29.4 PAN GS 060 BPW 012.5 # K1 301
29.4
29.4 PAN GS 060 BGE 010.0 # K1 9.2
29.4
29.4 PAN GS 060 BPW 010.0 # K1 301
29.4
29.4 PAN GS 060 BGE 007.5 # K1 6.9
29.4
29.4 PAN GS 060 BPW 007.5 # K1 301
HIGHER SPEEDS – see the 60W and 90W selections on adjacent pages
Geared motor weight = 4.9kg
* torque limiter recommended
1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 48.
60W
braked
high torque
45
67
12
1
75
38
5
BRAKE CABLE 300mm
30
MAX
20.5
92
ø40
ø18 h7
ø40
60
(73.5)
36
CTRS
18
44
35
4xø8.5
4xM6 ON 104 PCD
90
169
30
301
110
37
130
90
67
1
Ø
Ø40
45
6
75
88
BRAKE CABLE 300mm
30
MAX
7
92
20.5
136
18
30
4 HOLES Ø8.5
ON 104 P.C.D.
35
169
12
Ø18 h7
301
3 phase motors
1 phase motors
Nm
0.7
Nm
1.5
0.6
1.25
0.5
1.0
0.4
0.75
0.3
0.2
0.5
0.1
0.25
0
0
500
1000
1500
2000
Speed (r/min.)
Motor speed-torque curve
0
0
250
500
750
1000 1250 1500 1750 2000
Speed (r/min.)
Motor speed-torque curve
230 V
230 V
Rated current
0.57 A
Rated current
0.46 A
Starting current
1.05 A
Starting current
1.5 A
Input power
127 W
Input power
103 W
Rated speed
1300 r/min
Rated speed
1375 r/min
Panasonic G-series
90W Braked Motor
Brake motors feature a spring applied electromagnetic
brake suitable for emergency stop and holding torques.
The brake is operated from mains supply connections.
Up to six stops/starts per minute are possible. Flanged
and square gearboxes are available.
Flanged M9GC
gearbox
230V 1 phase versions are available for fixed applications. 230V 3 phase versions are available for variable
speed applications when used with the Panasonic
micro-inverter or Lenze smd inverter.
➤ Rated 230V ± 10% and 50 Hz
➤ 1 phase models intermittent duty S2
➤ 3 phase models continuous duty S1
➤ Enclosure IP44
➤ Class E insulation
➤ Single phase models supplied with
38
Square M9GD
gearbox
5.5µF run capcitor
➤ Integrated thermal protection switch
➤
(For external connection)
approved, UL on request
Ordering specification and example
Replace the letter # from the assembly number with a ‘C’ for flanged gearbox or ‘D’ for
square gearbox as required. Examples:
100 r/min flanged with 1 phase brake motor
7.5 r/min square with 3 phase brake motor
PAN GS 090 BGE 100.0 C K1
PAN GS 090 BPW 007.5 D K1
See page 48 for terminal box positions and feet.
1 phase Brake Motor
Model Number : M9RC90GBK4GE
Nominal
speed
r/min
500
300
200
150
100
75
60
50
30
20
15
12.5
10
7.5
Gearbox
Actual
model
speed
number
@230V
M9G# 3B
350
M9G# 5B
210
M9G# 7.5B
140
M9G# 10B
105
M9G# 15B
70
M9G# 20B
53
M9G# 25B
42
M9G# 30B
35
M9G# 50B*
21
M9G# 75B*
14
M9G# 100B* 10.5
M9G# 120B*
8.8
M9G# 150B*
7
M9G# 200B*
5.3
3 phase Brake Motor
Model Number : M9MC90GBK4W1
Rated Braking
Actual Rated Braking
torque torque
Assembly
speed torque torque
Assembly
Length
Nm
Nm
number
@230V Nm
Nm
number
L
1.85
0.95 PAN GS 090 BGE 500.0 # K1 458
1.4
0.95 PAN GS 090 BPW 500.0 # K1 289
3.1
1.6
PAN GS 090 BGE 300.0 # K1 275
2.4
1.6
PAN GS 090 BPW 300.0 # K1 289
4.6
2.4
PAN GS 090 BGE 200.0 # K1 183
3.5
2.4
PAN GS 090 BPW 200.0 # K1 289
5.7
2.9
PAN GS 090 BGE 150.0 # K1 138
4.4
2.9
PAN GS 090 BPW 150.0 # K1 289
10.6
4.4
PAN GS 090 BGE 100.0 # K1 92
6.5
4.4
PAN GS 090 BPW 100.0 # K1 289
13.3
5.5
PAN GS 090 BGE 075.0 # K1 69
8.1
5.5
PAN GS 090 BPW 075.0 # K1 289
16.0
6.9
PAN GS 090 BGE 060.0 # K1 55
10.2
6.9
PAN GS 090 BPW 060.0 # K1 289
19.6
8.2
PAN GS 090 BGE 050.0 # K1 46
12.2
8.2
PAN GS 090 BPW 050.0 # K1 289
19.6
13.7 PAN GS 090 BGE 030.0 # K1 27.5
19.6
13.7 PAN GS 090 BPW 030.0 # K1 289
19.6
19.1 PAN GS 090 BGE 020.0 # K1 18.3
19.6
19.1 PAN GS 090 BPW 020.0 # K1 289
19.6
19.6 PAN GS 090 BGE 015.0 # K1 13.8
19.6
19.6 PAN GS 090 BPW 015.0 # K1 289
19.6
19.6 PAN GS 090 BGE 012.5 # K1 11.5
19.6
19.6 PAN GS 090 BPW 012.5 # K1 289
19.6
19.6 PAN GS 090 BGE 010.0 # K1 9.2
19.6
19.6 PAN GS 090 BPW 010.0 # K1 289
19.6
19.6 PAN GS 090 BGE 007.5 # K1 6.9
19.6
19.6 PAN GS 090 BPW 007.5 # K1 289
HIGHER TORQUES – available from 20 r/min and slower speeds, see previous 60W high torque pages.
Geared motor weight = 4.8kg
* torque limiter recommended
1 signifies standard terminal box position 1 as shown. For further mounting positions please see page 31.
90W
braked
67
12
38
5
1
75
30
31
BRAKE CABLE 300mm
MAX
17
92
34
ø34
ø15 h7
60
(73.5)
36
CTRS
18
44
29
4xø8.5
4xM6 ON 104 PCD
90
110
25
184
289
39
130
67
Ø34
1
5
38
75
BRAKE CABLE 300mm
30
MAX
67
17
92
136
18
29
25
4 X M6
ON 104 P.C.D.
Ø15
h7
7
184
289
1 phase motors
3 phase motors
Nm
3.0
Nm
1.5
duty S2
2.5
2.0
1.0
1.5
1.0
0.5
0.5
0
0
500
1000
1500
2000
Speed (r/min.)
Motor speed-torque curve
0
0
250
500
750
1000
1250 1500
1750 2000
Speed (r/min)
Motor speed-torque curve
230 V
230 V
Rated current
0.84 A
Rated current
0.70 A
Starting current
1.08 A
Starting current
2.2 A
Input power
194 W
Input power
145 W
Rated speed
1050 r/min
Rated speed
1375r/min
Panasonic G-series
Micro-Inverter
The Panasonic Micro-Inverter is suitable for variable
speed operation of 230V 3 phase G-series geared
motors.
The Panasonic Micro-Inverter can be used with any
3 phase motor, rated for 230V operation.
Quiet and efficient operation is achieved as a result of
the 12 kHz IGBT switching frequency.
➤ Compact and aesthetic design
➤ Simple operation
➤ Quick and easy installation
➤ approved
40
Features
➤
➤
➤
➤
➤
➤
➤
➤
➤
Front view
(cover in place)
*
High torque capacity
Good speed holding
In-built and external stop/start control
In-built and external forward/reverse
External dynamic braking control
Inverter trip output
Accel/decel ramp
Optional external analogue signal
Optional remote speed potentiometer
Primary fixing hole for permanent location of inverter front cover to limit
access to dip switches and accel/decel potentiometer.
Secondary†
Fixing hole
† Secondary fixing hole to allow access to dip switches and accel/decel
potentiometer.
Primary *
Fixing hole
Status
LED
Frequency
potentiometer
for speed
setting
Mains
power
terminals
Dip switches
for parameter
settings
Motor
power
connector
Run/Stop
switch
Earthing
point
Accel/Decel
potentiometer
External
I/O connector
CW/CCW
switch or
external speed
reference input
Front view
Primary
Fixing hole
(cover removed)
Rear view
Panasonic G-series
Micro-Inverter
Standard model – XE
External speed reference model – XEA
The XE version has a built-in potentiometer for simple
speed control and quick installation. Also incorporated
are a standard range of control functions.
To allow greater flexibility, the XEA version will accept
either an external speed potentiometer or an 0-5V analogue signal.
Type
Standard model
External speed reference model
52.5
12.5
Power W
25 - 40
60 - 90
25 - 40
60 - 90
Type number
PAN GS M1G4A2 V1XE
PAN GS M1G9A2 V1XE
PAN GS M1G4A2 V1XEA
PAN GS M1G9A2 V1XEA
13
105.5
60
41
Panasonic
L1
S
High
Low
V
E
MOTOR
90
80.5
L2
W U
RUN
STOP
I1
60/90W
I2
I3
01
COM
240V
CCW
CW
2xø4.5
4.5
(131)
Control method
Mains
supply
Output
ratings
Inverter specifications
Rated motor power (W)
Output capacity (VA) *1
Rated output current (A)
Rated output voltage *2
Supply voltage *3
Voltage tolerance
Supply frequency
Control method
Output frequency range *4
Acceleration/deceleration time
Overload current rating
Regenerative brake torque *5
DC brake
Frequency setting
In-built controls
External control
Protective functions
Ambient
conditions
Motor thermal overload setting
* 1:
* 2:
* 3:
* 4:
* 5:
Ambient temperature
Ambient humidity
Atmosphere
Enclosure
25/40
112/159
0.28/0.40
60/90
195/279
0.49/0.70
Three phase; 200 to 230 V
Single phase; 200 to 230 V
± 10%
50/60 Hz ± 5%
PWM; 12 kHz switching frequency
1.0 to 120 Hz (factory preset to 60 Hz)
0.05 to 30 seconds
150% continuous – 200% for 90s
100% deceleration torque – short term
Braking start frequency: 3 Hz Braking time: 0.5 sec
In-built potentiometer (XE) or external control (XEA)
Start/Stop switch, CW/CCW switch, frequency range,
motor thermal overload
(Inputs) – Start/stop, CW/CCW, Coast stop
(Output): Trip signal
Under-voltage, overcurrent, overvoltage, overload,
power failure, stall prevention, motor thermal overload
25 W/40 W
60 W/90 W
-10oC to +40oC
Relative humidity 90% max (no condensation)
Free from corrosive gas, mist, dust, etc.
IP20
The rated output capacity is based on a rated output voltage of 230V.
The rated output voltage will never exceed the mains supply voltage.
The mains supply voltage should not exceed the rated voltage of the motor
When used with G-Series geared motors, never exceed 60Hz operation.
The regenerative brake torque is not rated for continuous operation. No braking resistor is used.
100
POWER SUPPLY
R
Panasonic G-series
Micro-Inverter accessories
RFI filter
To achieve compliance to EN55011 class A (Industrial
Installations) or class B (Domestic Installations) it is
recommended that an RFI filter is used. Compliance
can be achieved for motor cables up to a maximum of
15 metres when the recommended installation procedures are followed.
Current rating
Weight
Type number
2A
0.2 kg
PANB1SF1494
2 HOLES
70
Ø4.5
21
50.5
37
42
85
6
49
97
Motor Supply cable
Control cable
External Speed Reference cable
Length (m)
Type number
Length (m)
Type number
Length (m)
Type number
1
2
3
5
10
15
PAN GS MIC P1P
PAN GS MIC P2P
PAN GS MIC P3P
PAN GS MIC P5P
PAN GS MIC P10P
PAN GS MIC P15P
1
2
3
5
PAN GS MIC C1P
PAN GS MIC C2P
PAN GS MIC C3P
PAN GS MIC C5P
1
2
3
5
PAN GS MIC X1P
PAN GS MIC X2P
PAN GS MIC X3P
PAN GS MIC X5P
Ordering example
(10) off Panasonic Micro-Inverters
Model XE 60 - 90W, with filter, 5m motor supply and 3m
control cables.
Type nos.
PAN GS M1G 9A2V1 XE
PAN B1 SF14 94
PAN GS MIC P5P
PAN GS MIC C3P
Panasonic G-series
Micro-Inverters performance
1500
Speed (r/min)
60Hz
50Hz
50Hz
500
30Hz
0
0
1800
1500
Speed (r/min)
60Hz
50Hz
1000
40Hz
500
30Hz
20Hz
10Hz
15Hz
15Hz
* G-Series geared motors are rated for operation up to 60 Hz. Above 60 Hz performance and lifetime can not be guaranteed.
0
0
1
0.2
5Hz
3
0.4
0.6
0.8
1.0
Nm
0
0.1
5Hz
10Hz
0.2
0.2
1Hz
100%
200%
Continuousworking range
60W G-Series
Speed (r/min)
1500
1000
500
30Hz
20Hz
0.3
0.4
0.5
Nm
3Hz
0.4
0.6
0.8
1.2
1800
100%
50Hz
40Hz
25W G-Series
1.0
Nm
0
0
0.1
0.2
60Hz
Continuous working range
200%
0.3
0.4
0.5
300%
NM
0.6
3Hz
5Hz
5Hz
10Hz
10Hz
15Hz
15Hz
20Hz
20Hz
1000
40Hz
90W G-Series
43
500
30Hz
1000
40Hz
40W G-Series
1800
100%
Continuous working range
200%
1500
Speed (r/min)
60Hz
1800
100%
200%
Continuous working range
The Panasonic Micro-Inverter offers excellent performance characteristics, with a starting torque of 200% motor full load
torque achievable. Although designed for use with any 3 phase; 230V motor, the Micro-Inverter is the ideal controller to
compliment the Panasonic G-Series geared motor range. See graphs below for speed/torque performance details for the
25W, 40W, 60W and 90W G-Series motors when operated with the Micro-Inverter.
Panasonic G-series
Standard feet
Standard feet are available for all square gearboxes.
These can be ordered and fitted to suit the required
mounting configuration, see page 48.
B
A
Flanged geared motors with powers 60-90W do not
accept feet.
44
J
4 HOLES øV
K
N
P
4 HOLES X
EQUI-SPACED
ON W P.C.D.
H
D
C
R
L
M
Dimensions
A
B
C
D
H
J
K
L
M
N
P
R
V
W
X
6W Feet
12
8
65
35
6
17
34
60
25
3
5.5
6
ø4.8
ø70
M4
15W Feet
13
12
75
40
6
20
40
70
31
3.5
5.5
7
ø4.8
ø82
M5
25W Feet
15
14
85
45
6
23
46
80
35
3.5
–
7
ø5.5
ø94
M5
20
20
95
50
8
28
56
90
46
3.5
–
8
ø7
ø104
M6
40W-90W Feet
Ordering
6W type No.
PAN GS M6 B2
25W type No.
PAN GS M8 B2
15W type No.
PAN GS M7 B2
40-90W type No.
PAN GS M9 B2
Panasonic G-series
Side fixing feet
Side fixing feet fit to the front of the gearbox and allow
360o access to the gearbox shaft. They are available for
powers 25W and higher.
See page 48 to specify the mounting position required.
A
Flanged geared motors with powers 60W-90W do not
accept feet.
B
S
45
J
T
K
4 HOLES Z
EQUI-SPACED
ON øW PCD
X
R
E
D
F
C
Y
N
L
M
Dimensions
A
B
C
D
H
J
K
L
M
N
R
S
T
U
W
X
Y
Z
25W Feet
35
9
89
48
8
51
102
128
60
3.5
7
5.4
8.4
54
ø94
90
81
M5
40W-90W Feet
40
9
98.5
53
10
56
112
130
67
3.5
10
5.4
8.4
60
ø104 100
91
M6
Ordering
25W type No.
PAN GS M8 B3
40W-90W type No.
PAN GS M9 B3
Panasonic G-series
3 phase
400V
3 phase
230V
3 phase
230V
Brake
M6IA6G4GE
M7IA15G4GE
M8IA25GK4GE
M9IA40GK4GE
M9IC60GK4GE
M9IC90GKG4GE
M6RA6G4GE
M7RA15G4GE
M8RA25GK4GE
M9RA40GK4GE
M9RC60GK4GE
M9RC90GK4GE
M6RA6GB4GE
M7RA15GB4GE
M8RA25GBK4GE
M9RA40GBK4GE
M9RA60GBK4GE
M9RA90GBK4GE
M8MA25GK4CE1
M9MA40GK4CE1
M9MA60GK4CE1
M9MA90GK4CE1
M8MA25GKP4W1
M9MA40GKP4W1
M9MA60GKP4W1
M9MA90GKP4W1
M8MA25GBKP4W1
M9MA40GBKP4W1
M9MA60GBKP4W1
M9MA90GBKP4W1
3 phase
230V
3 phase
400V
Brake
1 phase
Quick
Reversible
1 phase
Standard
1 phase
Model
3 phase
230V
Brake
46
Brake
1 phase
Quick
Reversible
1 phase
Standard
1 phase
Model
M6IA6G4GE
M7IA15G4GE
M8IA25GK4GE
M9IA40GK4GE
M9IC60GK4GE
M9IC90GKG4GE
M6RA6G4GE
M7RA15G4GE
M8RA25GK4GE
M9RA40GK4GE
M9RC60GK4GE
M9RC90GK4GE
M6RA6GB4GE
M7RA15GB4GE
M8RA25GBK4GE
M9RA40GBK4GE
M9RA60GBK4GE
M9RA90GBK4GE
M8MA25GK4CE1
M9MA40GK4CE1
M9MA60GK4CE1
M9MA90GK4CE1
M8MA25GKP4W1
M9MA40GKP4W1
M9MA60GKP4W1
M9MA90GKP4W1
M8MA25GBKP4W1
M9MA40GBKP4W1
M9MA60GBKP4W1
M9MA90GBKP4W1
Motor data
Voltage Freq
(V)
(Hz)
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
230
400
400
400
400
400
400
400
400
400
400
400
400
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
Capacitor
(uF/V)
0.6
1.0
1.5
2.5
4.0
4.5
0.6
1.2
1.8
3.0
5.0
5.5
0.6
1.2
1.8
3.0
5.0
5.5
430
430
430
430
430
430
430
430
430
430
430
430
430
430
430
430
430
430
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
Output Rated
Rated
Rated
Power Current
Input
Speed
(W)
(A)
Power (W) (r/min)
6
0.09
20
1225
15
0.15
34
1225
25
0.23
50
1225
40
0.36
79
1200
60
0.51
118
1225
90
0.67
153
1325
6
0.1
22
1225
15
0.17
38
1225
25
0.25
57
1250
40
0.41
94
1175
60
0.57
127
1300
90
0.84
194
1050
6
0.1
22
1225
15
0.17
38
1225
25
0.25
57
1250
40
0.41
94
1175
60
0.57
127
1300
90
0.84
194
1050
25
0.12
51
1350
40
0.15
62
1375
60
0.21
94
1375
90
0.3
132
1375
25
0.26
53
1375
40
0.33
70
1375
60
0.46
103
1375
90
0.7
145
1375
25
0.27
54
1375
40
0.32
66
1375
60
0.46
100
1375
90
0.65
145
1400
Rating
(IP)
Duty
Insulation
Class
Thermal
Switch
20
54
54
54
54
54
20
50
54
54
54
54
20
20
44
44
44
44
54
54
54
54
54
54
54
54
44
44
44
44
S1
S1
S1
S1
S1
S1
S2*
S2*
S2*
S2
S2*
S2
S2*
S2*
S2*
S2*
S2*
S2
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
S1
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
No
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
* Duty rating becomes S1 when combined with Panasonic gearbox.
Rated
Torque
(Nm)
0.044
0.11
0.18
0.31
0.47
0.63
0.044
0.11
0.19
0.33
0.44
0.76
0.04
0.11
0.19
0.33
0.44
0.76
0.17
0.26
0.41
0.58
0.17
0.27
0.41
0.62
0.17
0.27
0.41
0.62
Brake
Current
(A)
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.03
0.04
0.04
0.07
0.08
0.08
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.03
0.08
0.08
0.08
Starting Starting
Current Torque Pull-Out
Torque
(Nm)
(Nm)
0.12
0.047
0.062
0.23
0.09
0.14
0.37
0.13
0.23
0.60
0.23
0.39
0.85
0.49
0.68
1.40
0.49
0.96
0.12
0.049
0.065
0.24
0.093
0.15
0.43
0.18
0.28
0.63
0.29
0.45
1.05
0.56
0.83
1.08
0.62
0.83
0.12
0.049
0.065
0.24
0.093
0.15
0.43
0.18
0.28
0.63
0.29
0.45
1.05
0.56
0.83
1.08
0.62
0.83
0.31
0.56
0.56
0.46
0.72
0.72
0.70
1.05
1.05
0.95
1.56
1.56
0.68
0.65
0.65
1.00
0.88
0.88
1.50
1.11
1.11
2.20
1.96
1.96
0.67
0.66
0.66
1.10
0.78
0.78
1.50
1.18
1.18
2.20
1.96
1.96
Brake
Input
Power (W)
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
4
5
6
9
11
11
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
5
8
8
8
Brake
Holding
Torque (Nm)
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.05
0.08
0.10
0.20
0.39
0.39
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.1
0.2
0.39
0.39
Panasonic G-series
Part Number Breakdown
Motor
M
G
4
*
Frame size
6
7
8
9
Voltage
Power (W)
60mm
6
5
5
0
0
0
70mm
80mm
1
2
4
6
9
90mm
Type
I
M
R
G
4
C
K
B
Output
A
C
3ph 230V
1
1
3ph 400V
Specification
1 phase
3 phase
Quick reversible
or braked
1ph 230V
E
W
E
6-40W
Terminal box
Braked
*
Omit character if
leadwire
60-90W
optional character
Example
6W 1 phase 230V brake
motor
M6RA6GB4GE
Gearbox
M
G
B
*
*
Frame size
6
7
8
9
Gear ratio i
60mm
70mm
80mm
7
90mm
Gearbox type
A
D
T
C
S
6-40W Square
60-90W Square
60-90W Square H/T
60-90W Flanged
1
1
1
1
2
60-90W Flanged H/T
.
1
1
2
2
3
5
7
0
2
5
8
0
3
5
5
0
0
0
5
0
0
5
0
0
0
0
0
Example
60W flanged high torque
with i = 75
M9GS75B
*
optional character
Decimal Gearbox (required in addition for speeds 7.5 r/min and below)
M
1
G
Example
90W decimal gearbox
M9GC10XB
0
Frame size
6
7
8
9
60mm
70mm
80mm
90mm
Output
A
C
6-40W
60-90W
Bearing type
X
X
M
B
Sintered 6-40W
Ball 60-90W
Ordering
fast and simple
Panasonic G-series geared motors are built to order
from our extensive stocks of motors and gearheads.
Fast shipment is normal and same day shipment is
often possible.
When placing an order, please state the type number,
quantity required, gearbox mounting position and foot
mounting position (if required). See page 48 for details.
Ordering examples:
Type number
G-series geared motor, standard induction 1 phase 6W, output speed of 50 r/min,
lead wire position 2.
PAN GS 006 IGE 050.0 AL2
G-series geared motor, 3 phase 400V high torque 60W with square gearhead,
output speed 2 r/min, terminal box position 1, foot position 1 (specify standard
or side feet)
PAN GS 060 MCE 002.0 TKA
48
50
-
Micro-inverter
RFI filter
Motor cables - 3m
Control cables - 3m
External speed reference cable - 3m(only used with PAN GS M1 G4A2 V1XEA or
PAN GS M1 G9A2 V1XEA)
PAN GS M1G 9A2XE
PAN B1 SF 1494
PAN GS MIC P3P
PAN GS MIC C3P
PAN GS MIC X3P
Other products available from Panasonsic
B-series
For European sales & service
addresses see our website
A-series
S-series
www.Lenze.co.uk
Lenze Ltd
Caxton Rd
Bedford MK41 0TS
United Kingdom
Tel: +44 (0)1234 321321
Email: sales@lenze.co.uk
UKGSERIES0905
Panasonic G-series
P
A
N
G
Assembly part number coding
.
S
Power (W)
006 015 025 040 060 090
Mounting
position
Motor type
IGE
RGE
MCE
1ph 230V
1ph 230V quick reversible
3ph 400V
MPW
BGE
BPW
3ph 230V
1ph 230V brake motor
3ph 230V brake motor
Gearbox type
A
D
T
C
S
Nominal output speed r/min
500.0
060.0
010.0
002.0
300.0
050.0
008.0
001.5
200.0
030.0
007.5
001.3
150.0
020.0
006.5
001.0
100.0 075.0
015.0 012.5
005.0 003.0
000.8
Example
60W 230V 3 phase braked, 7.5r/min,
square gearbox, mounting position 1,
foot position 2
PAN GS 060 BPW 007.5 DKB
1
2
3
4
Termination
Leadwire
Terminal box
6-40W Square
without
feet
60-90W Square
60-90W Square H/T
90-90W Flanged
or Mounting
60-90W Flanged H/T
Mounting
position 1
A
B
C
D
L
K
Foot pos 1
Foot pos 2
Foot pos 3
Foot pos 4
Mounting
position 2
E
F
G
H
Foot pos 1
Foot pos 2
Foot pos 3
Foot pos 4
with feet
Mounting
position 3
I
J
K
L
Mounting
position 4
Foot pos 1
Foot pos 2
Foot pos 3
Foot pos 4
M
N
O
P
Foot pos 1
Foot pos 2
Foot pos 3
Foot pos 4
Terminal box/lead wire positions
The terminal box position is described when viewed from the output shaft end of the geared motor. Unless specified when ordering, the standard terminal box position 1 will be supplied.
POS 1
POS 2
POS 3
POS 4
Example
Foot position 2
Foot positions
The foot position is described when viewed from the output shaft end of the
geared motor.
Unless specified when ordering, the standard foot position 1 will be supplied.
POS 1
POS 2
POS 3
POS 4
Terminal box
position 2
49
48
Panasonic G-series
Gearbox data
Fitting and operating instructions
Tightening of fixing bolts
Panasonic AC geared motors comprise a totally
enclosed standard motor with grease lubricated bearings and a grease-filled gearbox, neither of which will
require any maintenance during the running of the
unit under normal operating conditions. On installation, the mounting of the motor must allow a free flow
of cooling air over the surface of the motor. This condition must be maintained under all circumstances. The
method of mounting should also limit the radial force
applied to the geared output shaft.
Radial and axial loads
Fitting instructions
For models 60W and above, it is recommended that the
shaft spigot is used for location, with the four mounting clearance holes on the gearbox used for securing
the unit to the machine. When tightening the fixing
bolts follow the sequence shown in the diagram.
In the event of the unit being separated, this will invalidate the warranty.
Type
60 mm2
70 mm2
80 mm2
90 mm2
90 mm2
90 mm2
It is recommended that a new O-ring is then fitted to
ensure proper sealing.
IMPORTANT
When face mounting the geared motor to an assembly,
DO NOT remove or twist the gearhead from or on the
motor. This will cause the O-ring to deform resulting in
grease leakage when reassembled. If the mounting orientation is modified or the identification label removed
from the geared motor, warranty of the goods may be
invalidated.
Permissible
radial load
(N)
Permissible
axial load
(N)
98
196
294
392
588
784
29
39
49
98
147
147
6W
15W
25W
40W
60-90W
HT 60-90W
Spare 'O' rings
Motor power
Motor size
Type number
6W
60 mm2
PAN GS ORING 60
15W
70 mm2
PAN GS ORING 70
25W
80 mm2
PAN GS ORING 80
40-90W
90 mm2
PAN GS ORING 90
Gearbox efficiency
Ball Bearings
Ratio
Metl Bush
Bearings
49
Radial load shows how much bending load may be
applied to the output shaft of the gearbox at 1/2
length position. This applies to the application when
the motor and machine are
connected with a chain or belt
but does not apply when a soft
flexible coupling is used. Since
excessive radial and axial loads
affect the life of the geared
motor, please do not exceed the
maximum stated loads.
For models 40W and below, it is recommended that the
output shaft bearing housing should be used as a
locating spigot for mounting the unit. Firstly, remove
the four fixing nuts, taking care that the motor and
gearbox do not separate. The four fixing bolts should
be used to secure the unit to the machine.
Alternatively, foot mounts can be supplied to ease
mounting.
Size
Type
60mm2
70mm2
80mm2
M6GAxxxB
M7GAxxxB
M8GAxxxB
M9GAxxxB
M9GCxxxB
M9GDxxxB
M9GSxxxB
M9GTxxxB
M6GAxxxM
M7GAxxxM
M8GAxxxM
M9GAxxxM
90mm2
60mm2
70mm2
80mm2
90mm2
3-9
10 - 18
81%
81%
75%
20 - 60
75 - 180
200
10:1
intermediate
75%
70%
n/a
56%
70%
65%
n/a
68%
58%
70%
63%
58%
n/a
46%