TABLE OF CONTENTS
Introduction
2-3 | Supplier Line Card
4 | Motor FLA Reference Guide
5 | Industry Definitions (NEMA Standards)
6-7 | Control Panels & Electric Motor Controls
120 | Capabilities/Products/Service Highlights
121 | Quote/Order Form
122-123 | Terms & Conditions
CH - Assembled Motor Starters
8-17 | ES4 Series
64-73 | ES4XP Series
FVNR Non-Combination Motor Starters
FVNR Non-Combination Motor Starters
1/4 HP - 500 HP
1/4 HP - 500 HP, NEMA 4X Enclosed, Polyester Enclosure
18-27 | CS4 Series
74-83 | CS4XP Series
FVNR Combination Motor Starters
FVNR Combination Motor Starters
1/4 HP - 500 HP
1/4 HP - 500 HP, NEMA 4X Enclosed, Polyester Enclosure
28-35 | ENS4 Series
84-93 | ES4XS Series
NEMA Rated Non-Combination Motor Starters
FVNR Non-Combination Motor Starters
1/4 HP - 500 HP, NEMA 4X Enclosed, Stainless Steel Enclosure
Sizes 0 - 7
94-103 | CS4XS Series
36-43 | CNS4 Series
FVNR Combination Motor Starters
1/4 HP - 500 HP, NEMA 4X Enclosed, Stainless Steel Enclosure
NEMA Rated Combination Motor Starters
Sizes 0 - 7
104-111 | ENSX-K Series
44-53 | ESX-K Series
Explosion Proof FVNR Non-Combination Motor Starters
NEMA 7/9, 1/4 HP - 500 HP
Explosion Proof FVNR Non-Combination Motor Starters
NEMA 7/9, 1/4 HP - 500 HP
112-119 | CNSX-K Series
54-63 | CSX-K Series
Explosion Proof FVNR Combination Motor Starters
NEMA 7/9, 1/4 HP - 500 HP
Explosion Proof FVNR Combination Motor Starters
NEMA 7/9, 1/4 HP - 500 HP
Cordyne’s Outside Sales Team
Brings extensive knowledge of the leading edge industrial-electrical motor controls/components technology and resources.
In addition, Cordyne maintains a valuable network of operating executives and strategic partners that we leverage to help
our customers achieve success.
Cordyne’s Inside Sales Team
Is ready to assist you with any and all questions, placing orders, checking stock, cross referencing part numbers, and quote
requests.
Cordyne’s Engineering Department
Is here to help you with application information, custom projects, and technical information.
Cordyne, Inc. Industrial Controls, Motors & Drives
Mail To: 9820 Drysdale Lane Houston, Texas 77041
Local: (713) 460-5151
Toll Free: 1(800) 324-1484
Fax: (713) 460-5186
Hours of Operation
Monday-Friday
7:00 AM - 5:00 PM CST
24 Hour Service Available
sales@cordyne.com | www.cordyne.com | www.store.cordyne.com
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
1
SUPPLIER LINE CARD
AKRON ELECTRIC
Explosion Proof (NEMA 7) Enclosures, Fittings, Pilot Devices, Junction Boxes & Remote Stations
ALTECH CORPORATION
Terminal Blocks, Circuit Breakers & Enclosures
BABBITT
INTERNATIONAL INC
BABBITT INTERNATIONAL
Level Sensors, Ultra Sonic & Radar Level Transmitters, Bag house Pressure Transmitters, Dry material flow switch,
Dust emission monitor
BRAD HARRISON/WOODHEAD
Cable Assemblies & Quick-Disconnects
C3 CONTROLS
Non-fused Disconnect Switches, IEC Contactors, IEC Overload Relays, IEC Motor Protection Circuit Breakers, CAM
Switches, Hermetically Sealed Relays, Proximity Sensors
CARLO GAVAZZI
Photoelectric & Proximity Sensors, Level Switches & Dupline
COOPER BUSSMANN
Fuses, Circuit Protection Devices, Fuse Blocks (AC & Medium Voltage)
EATON/CUTLER-HAMMER
Circuit Breakers, Contactors, Relays, PLCs, Industrial Systems, Starters, Motor Control Centers, AC Drives & Switchgear
EUCHNER
Limit Switches & Human Safety Switches
FERRAZ SHAWMUT (MERSEN)
Fuses, Fuse Blocks & Holders, Power Distribution Blocks, Surge Protection Devices, Circuit Protection Accessories,
Disconnect Switches & High Power Switches
GE INDUSTRIAL
Circuit Breakers, Contactors, Relays, PLCs, Industrial Systems, Starters, Motor Control Centers, AC Drives & Switchgear
GE MULTILIN (ITI)
Transformers (Control, Potential, Voltage & Control Power 600V Class & Current Voltage) & Ground-fault and Sensing
Relays
HOFFMAN
Enclosures, Boxes, Cabinets, Panels, Cable Support, Wireway, and Trough
HAMMOND MANUFACTURING
NEMA & Stainless Steel Enclosures, Electrical Racks & Cooling Packages
HUBBELL KILLARK
Fittings, NEMA 7/9 Enclosures, Pilot Devices, Lighting, Pilots & Receptacles
HAMMOND POWER SOLUTIONS
Dry Type, Transformers, Reactors & DV/DT Filters
2
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
SUPPLIER LINE CARD
HOMEWOOD/ WESTING HOUSE MOTORS
Motor & Related, Switchgear, Control, Nuclear
Custom Engineered Motors, Induction Motors, Synchronous Motors, DC Motors, Wind Generators
MAGNECRAFT
Industrial Relays (Socket Compatible, Flange Mounted, Solid State, Time Delay, Latching, Sequence, Stepper,
Printed Circuit Board)
PEPPERL + FUCHS
Proximity & Ultrasonic, Photo Sensors, Encoders & Barriers
PHOENIX CONTACT
Contactors & Motor Control, Terminal Blocks, Protective Devices, Fieldbus Components & Systems, Controllers
& PLC’s
PULS POWER
Single and Three-phase AC/DC Power Supplies, AC/DC Converter, Redundant and AS-interface Power Supplies
and Buffer Modules
RED LION CONTROLS
Mag-Pickup, Encoders, Digital Panel Meters, Operator Interfaces & Controls
RK ELECTRONICS
Motor Protection, Surge Suppressors & Timing Relays
SOLA/HEVI-DUTY
DC Power Supplies & Transformers
SPRECHER + SCHUH
Contactors, Pilot Devices, Overloads, Terminal Blocks & Motor Circuit Protection
SUNX SENSORS USA
Photoelectric, Micro & Ultrasonic Area Sensors, Safety Curtains
TOSHIBA
AC Drives, Electric Motors, PLCs, UPS Systems & Vacuum Contactors
TRANSCOIL, INC.
Line Reactors & Drive Filters
GE OILFIELD TRANSFORMERS
Transformers
WEIDMULLER
Circuit Protection, Connectors, Sensors, Enclosures & Terminal Blocks
WIEGMANN
Enclosures and Accessories
WEG MOTORS
Motors-Explosion Proof, Vertical Hollow Shaft, IEC Metric, Fractional HP General Purpose, NEMA Premium,
Crusher Duty, Soft Starters and Control Products
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
3
MOTOR FLA REFERENCE GUIDE
AC INDUCTION MOTOR
HP
Single Phase
115 Volt
0.25
0.5
0.75
1
1.5
2
3
5
7.5
10
15
20
25
30
40
50
60
75
100
125
150
200
250
300
350
400
450
500
5.8
9.8
13.8
16
20
24
34
56
80
100
135
230 Volt
2.9
4.9
6.9
8
10
12
17
28
40
50
68
88
110
136
176
216
Three Phase
230 Volt
380 Volt
460 Volt
1.4
2.2
3.2
4.2
6
6.8
9.6
15.2
22
28
42
54
68
80
104
130
154
192
248
312
360
480
602
0.75
1.3
1.8
2.3
3.3
4.3
6.1
9.7
14
18
27
34
43
51
66
83
103
128
165
208
240
320
403
482
560
636
711
786
0.7
1.1
1.6
2.1
3
3.4
4.8
7.6
11
14
21
27
34
40
52
65
77
96
124
156
180
240
302
361
414
477
515
590
575 Volt
0.64
0.9
1.3
1.7
2.4
2.7
3.9
6.1
9
11
17
22
27
32
41
52
62
77
99
125
144
192
242
289
336
382
412
472
The information in this chart was derived from Table 430-148 & 430-150 of the NEC and Table 52.2 of UL standard 508. The voltages listed are
rated motor voltages. The current listed shall be permitted for system voltage ranges of 110 -120, 220 - 240, 440 - 480 and 550 - 600 volts.
The full-load current values are for motors running at usual speeds and motors with normal torque characteristics. Motors built for especially
low speeds or high torques may have higher full-load currents, and multi-speed motors will have full-load currents varying with speed. In these
cases, the nameplate current ranges shall be used.
CAUTION: The actual motor amps may be higher or lower than the average listed above. For more reliable motor protection, use the actual
motor current as listed on the motor nameplate. Use this table as a guide only.
4
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
Definitions Pertaining to
Non Hazardous Locations
Type 1 Enclosures constructed for indoor use to provide a degree of
protection to personnel against incidental contact with the enclosed
equipment, and to provide a degree of protection against falling dirt.
NEMA 250-1997.
Type 12 Enclosures constructed (without knockouts) for indoor use to
provide a degree of protection to personnel against incidental contact
with the enclosed equipment, to provide a degree of protection against
falling dirt; against circulating dust, lint and fiber flyings; and against
dripping and light splashing of liquids. NEMA 250-1997.
Type 2 Enclosures constructed for indoor use to provide a degree of
protection to personnel against incidental contact with the enclosed
equipment, to provide a degree of protection against falling dirt, and to
provide a degree of protection against dripping and light splashing of
liquids. NEMA 250-1997.
Type 3 Enclosures constructed for either indoor or outdoor use to provide
a degree of protection to personnel against incidental contact with the
enclosed equipment, to provide a degree of protection against falling dirt,
rain, sleet, snow, and windblown dust; and that will be undamaged by the
external formation of ice on the enclosure. NEMA 250-1997.
Type 3R Enclosures constructed for either indoor or outdoor use to
provide a degree of protection to personnel against incidental contact
with the enclosed equipment, to provide a degree of protection against
falling dirt, rain, sleet, snow; and that will be undamaged by the external
formation of ice on the enclosure. NEMA 250-1997.
Type 3S Enclosures constructed for either indoor or outdoor use to provide
a degree of protection to personnel against incidental contact with the
enclosed equipment, to provide a degree of protection against falling dirt,
rain, sleet, snow; and windblown dust; and in which the external mechanism
(s) remain operable when ice laden. NEMA 250-1997.
Type 4 Enclosures constructed for either indoor or outdoor use to provide
a degree of protection to personnel against incidental contact with the
enclosed equipment, to provide a degree of protection against falling dirt,
rain, sleet, snow; windblown dust, splashing water, and hose-directed water;
and that will be undamaged by the external formation of ice on the enclosure.
NEMA 250-1997.
Type 4X Enclosures constructed for either indoor or outdoor use to provide
a degree of protection to personnel against incidental contact with the
enclosed equipment, to provide a degree of protection against falling dirt,
rain, sleet, snow; windblown dust, splashing water, hose-directed water; and
corrosion; and that will be undamaged by the external formation of ice on the
enclosure. NEMA 250-1997.
Type 5 Enclosures constructed for indoor use to provide a degree of
protection to personnel against incidental contact with the enclosed
equipment, to provide a degree of protection against falling dirt; against
settling airborne dust, lint and fiber flyings; and to provide a degree of
protection against dripping and light splashing of liquids. NEMA 250-1997.
Type 6 Enclosures constructed for either indoor or outdoor use to provide
a degree of protection to personnel against incidental contact with the
enclosed equipment, to provide a degree of protection against falling dirt;
against hose-directed water and the entry of water during occasional
temporary submersion at a limited depth; and that will be undamaged by the
external formation of ice on the enclosure. NEMA 250-1997.
Type 6P Enclosures constructed for either indoor or outdoor use to provide
a degree of protection to personnel against incidental contact with the
enclosed equipment, to provide a degree of protection against falling dirt;
against hose-directed water and the entry of water during prolonged
submersion at a limited depth; and that will be undamaged by the external
formation of ice on the enclosure. NEMA 250-1997.
(NEMA Standards)
INDUSTRY DEFINITIONS
Type 12K Enclosures constructed (with knockouts) for indoor use to
provide a degree of protection to personnel against incidental contact
with the enclosed equipment, to provide a degree of protection against
falling dirt; against circulating dust, lint and fiber flyings; and against
dripping and light splashing of liquids. NEMA 250-1997.
Type 13 Enclosures constructed for indoor use to provide a degree of
protection to personnel against incidental contact with the enclosed
equipment, to provide a degree of protection against falling dirt;
against circulating dust, lint and fiber flyings; and against spraying,
splashing and seepage of water, oil and non-corrosive coolants.
NEMA 250-1997.
Definitions Pertaining to
Hazardous (Classified) Locations
Type 7 Enclosures constructed for indoor use in hazardous locations
classified as Class I, Division 1, Groups A, B, C or D, as defined in
NFPA70. NEMA 250-1997
Type 8 Enclosures constructed for either indoor or outdoor use in
hazardous locations classified as Class 1, Division 1, Groups A,
B, C or D, as defined in NFPA70. NEMA 250-1997
Type 9 Enclosures constructed for indoor use in hazardous locations
classified as Class II, Division 1, Groups E, F or G, as defined in
NFPA70. NEMA 250-1997
Type 10 Enclosures constructed to meet the requirements of the Mine
Safety and Health Administration, 30 CFR, Part 18. NEMA 250-1997.
INDUSTRY STANDARD ENCLOSURE
RATING CROSSOVER CHART
ENCLOSURE TYPE RATING VS. IP RATING
Electrical enclosures are rated by type
(NEMA 250 / UL 50), and/or IP rated
(IEC 60529) based on the degree of protection
provided.
Type ratings and IP ratings have only the
following in common:
1. A degree of protection for persons from
hazardous components inside the enclosure.
2. A degree of protection for equipment inside
the enclosure from ingress of solid foreign
objects, including dust.
3. A degree of protection for equipment inside
the enclosure from ingress of water.
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
ENCLOSURE RATING
NEMA
IP
TYPE 1
IP20
TYPE 3
IP64
TYPE 3R
IP22
3RX
TYPE 4
IP66
TYPE 4X IP66
TYPE 6
IP67
TYPE 12
IP55
12K
TYPE13 IP65
5
CONTROL PANELS & ELECTRIC MOTOR CONTROLS
Cordyne, Inc. specializes in custom assemblies to meet all your electrical needs
From our relatively simple “Motor Starters” to our sophisticated “VFD Assemblies and High Voltage Power Stations”.
Our experienced and skilled personnel will help you meet your specific application and design requirements.
CH-ES4 Series
FVNR Motor Starters 1/4 HP – 500 HP
Heavy duty enclosure which is painted steel with ANSI61 gray powder coating. All components are mounted
to enclosure’s back- pan. Enclosure is rated for NEMA 4, 3R, 13, 12, 1 applications. IEC Contactor with
adjustable thermal overload (Class 10). NEMA, UL, CSA & IEC rated components only. A wide range of
standard options make it possible to adapt a “standard” control to your particular needs. Oversized Control
Power Transformer (optional). Units are assembled, pre-wired and ready to go straight out of the box.
CH-CS4 Series
FVNR Combination Motor Starters 1/4 HP – 500 HP
Heavy duty enclosure which is painted steel with ANSI61 gray powder coating. All components are mounted
to enclosure’s back- pan. Enclosure is rated for NEMA 4, 3R, 13, 12, 1 applications. IEC Contactor with
adjustable thermal overload (Class 10). NEMA, UL, CSA & IEC rated components only. A wide range of
standard options make it possible to adapt a “standard” control to your particular needs. Oversized Control
Power Transformer (optional). Units are assembled, pre-wired and ready to go straight out of the box.
Molded Case Circuit Breaker with through-the-door handle.
CH-ENS4 Series
NEMA Rated Motor Starters (Sizes 0 – 7)
Heavy duty enclosure which is painted steel with ANSI61 gray powder coating. All components are mounted
to enclosure’s back-pan. Enclosure is rated for NEMA 4, 3R, 13, 12, 1 applications. NEMA Rated
Non-Reversing motor starter with three leg protection overload heaters (included standard-sized to rated
chart amps). Reset pushbutton is standard on all units. NEMA, UL, CSA & IEC rated components only. A wide
range of standard options make it possible to adapt a “standard” control to your particular needs. Oversized
Control Power Transformer (optional). Units are assembled, pre-wired and ready to go straight out of the box.
CH-CNS4 Series
NEMA Rated Motor Starters (Sizes 0 – 7)
Heavy duty enclosure which is painted steel with ANSI61 gray powder coating. All components are mounted
to enclosure’s back pan. Enclosure is rated for NEMA 4, 3R, 13, 12, 1 applications. NEMA Rated
Non-Reversing motor starter with three leg protection overload heaters (included standard-sized to rated
chart amps). Reset pushbutton is standard on all units. NEMA, UL, CSA & IEC rated components only. A wide
range of standard options make it possible to adapt a “standard” control to your particular needs. Oversized
Control Power Transformer (optional). Units are assembled, pre-wired and ready to go straight out of the box.
Includes a Molded Case Circuit Breaker with through-the-door handle.
CH-ESX-K Series (Enclosure Manufacturer: Hubbell-Killark)
Explosion Proof FVNR Motor Starters – NEMA 7/9 1/4 HP – 500 HP
IEC Contactor with adjustable thermal Overload (Class 10) Oversized Control Power Transformer (optional),
External Machined Flange Joint Design. Units are assembled, pre-wired and ready to go. Integral Cast
Mounting Feet. Units come standard with Hinged Covers. S.S. (316) Captive Quick Thread Cover Bolts
(optional) Ground Lug Package Steel mounting pan. Enclosures Cast From Copper – Free Aluminum –
Max 0.25% Copper Content. Aluminum, Stainless Steel Shot or Sandblasted Natural Finish. Enclosures
Suitable for NEMA 4X. Cast Aluminum and Stainless Steel Hinge.
CH-CSX-K Series (Enclosure Manufacturer: Hubbell-Killark)
Explosion Proof FVNR Combination Motor Starters – NEMA 7/9 1/4 HP – 500 HP
IEC Contactor with adjustable thermal Overload (Class 10) Oversized Control Power Transformer (optional),
External Machined Flange Joint Design. Units are assembled, pre-wired and ready to go. Integral Cast
Mounting Feet. Units come standard with Hinged Covers. S.S. (316) Captive Quick Thread Cover Bolts
(optional) Ground Lug Package Steel mounting pan. Enclosures Cast From Copper – Free Aluminum –
Max 0.25% Copper Content. Aluminum, Stainless Steel Shot or Sandblasted Natural Finish. Enclosures
Suitable for NEMA 4X. Cast Aluminum and Stainless Steel Hinge. Includes a Molded Case Circuit Breaker
with through-the-door handle.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
6
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
MOTOR CONTROLS PRODUCT OFFERING
We specialize in:
• Starter Packages
• Explosion Proof Starters
• Inverter Packages
• NEMA Enclosure Packaging
• Customer DesignSpecial Fabricated Enclosures
• OEM Packages
• Distribution & Drive Duty
• Transformers & Reactors
• PLC & Monitoring Systems
• Electric Motor & Starter Packages
CH-ES4XP Series
FVNR Motor Starters 1/4 HP – 500 HP, NEMA 4X Enclosed, Polyester Enclosure
Heavy Duty, Corrosion Resistant, Molded Fiberglass Enclosure with gray injection coloring. All components
are mounted to enclosure’s back-pan. The enclosure is rated for NEMA 4X applications. IEC contactor
with adjustable thermal overload (Class 10). NEMA, UL, CSA & IEC rated components only. A wide range
of standard options make it possible to adapt a “standard” control to your particular needs. Oversized
Control Power Transformer (optional). Units are assembled, pre-wired and ready to go straight out of the
box.
CH-CS4XP Series
FVNR Combination Motor Starters 1/4 HP – 500 HP, NEMA 4X Enclosed, Polyester
Enclosure Heavy Duty, Corrosion Resistant, Molded Fiberglass Enclosure with gray injection coloring. All
components are mounted to enclosure’s back-pan. The enclosure is rated for NEMA 4X applications. IEC
contactor with adjustable thermal overload (Class 10). NEMA, UL, CSA & IEC rated components only. A
wide range of standard options make it possible to adapt a “standard” control to your particular needs.
Oversized Control Power Transformer optional. Molded case circuit breaker with through-the door 4X
handle. Units are assembled, pre-wired and ready to go straight out of the box.
CH-ES4XS Series
FVNR Motor Starters 1/4 HP – 500 HP, NEMA 4X Enclosed, Stainless Steel Enclosure
Heavy Duty, Corrosion Resistant, 14 gauge Stainless Steel Enclosure with brushed finish. All components
are mounted to enclosure’s back-pan. The enclosure is rated for NEMA 4X applications. IEC contactor
with adjustable thermal overload (Class 10). NEMA, UL, CSA & IEC rated components only. A wide range
of standard options make it possible to adapt a “standard” control to your particular needs. Oversized
Control Power Transformer optional. Units are assembled, pre-wired and ready to go straight out of the box.
CH-CS4XS Series
FVNR Combination Motor Starters 1/4 HP – 500 HP,
NEMA 4X Enclosed, Stainless Steel Enclosure
Heavy Duty, Corrosion Resistant, 14 gauge Stainless Steel Enclosure with brushed finish. All components
are mounted to enclosure’s back-pan. The enclosure is rated for NEMA 4X applications. IEC contactor
with adjustable thermal overload (Class 10). NEMA, UL, CSA & IEC rated components only. A wide range
of standard options make it possible to adapt a “standard” control to your particular needs. Oversized
Control Power Transformer optional. Molded case circuit breaker with through-the door 4X handle.
Units are assembled, pre-wired & ready to go straight out of the box.
CH-ENSX-K Series (Enclosure Manufacturer: Hubbell-Killark)
Explosion Proof FVNR Motor Starters, NEMA 7/9, 1/4 HP – 500 HP
NEMA rated Contactor with Adjustable Thermal Overload (Class10), Oversized Control Power Transformer
(optional). External Machined Flange Joint Design. Units are assembled, pre-wired and ready to go.
Integral Cast Mounting Feet. Units come standard with Hinged Covers, S.S. 316 Captive Quick Thread
Cover Bolts (optional) Ground Lug Package, Steel mounting pan. Enclosures cast from Copper-Free
Aluminum – Max 0.25% Copper Content. Aluminum, Stainless Steel Shot or Sandblasted Natural Finish.
Enclosures suitable for NEMA 4X Applications. Cast aluminum and Stainless Steel Hinge.
CH-CNSX-K Series (Enclosure Manufacturer: Hubbell-Killark)
Explosion Proof Combination FVNR Motor Starters, NEMA 7/9, 1/4 HP – 500 HP
NEMA rated Contactor with Adjustable Thermal Overload (Class10), Oversized Control Power Transformer
(optional). External Machined Flange Joint Design. Units are assembled, pre-wired and ready to go.
Integral Cast Mounting Feet. Units come standard with Hinged Covers, S.S. 316 Captive Quick Thread
Cover Bolts (optional) Ground Lug Package, Steel mounting pan. Enclosures cast from Copper-Free
Aluminum – Max 0.25% Copper Content. Aluminum, Stainless Steel Shot or Sandblasted Natural Finish.
Enclosures suitable for NEMA 4X Applications. Cast aluminum and Stainless Steel Hinge. Includes a
Molded Case Circuit Breaker and external operating handle.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
7
FVNR Non- Combination Motor Starters 1/4 HP – 500 HP
ES4 SERIES
Heavy duty enclosure which is painted steel with ANSI 61 gray powder coating. All
components are mounted to enclosure’s back pan. Enclosure is rated for NEMA 4, 3R, 13,
12, 1 applications. IEC Contactor with adjustable thermal overload (Class 10). NEMA, UL,
CSA & IEC rated components only. A wide range of standard options make it possible to
adapt a “standard” control to your particular needs. Oversized Control Power Transformer
(optional). Units are assembled, pre-wired and ready to go straight out of the box.
Technical Data and Specifications
ENCLOSURE
Applications
• Designed to enclose electrical and/or electronic equipment and
protect against harsh, industrial environments.
Standards
• UL 508 Type 3R, 4, 12 and 13
• CSA Type 3R, 4, 12 and 13
Complies with:
• NEMA Type 3R, 4, 12 and 13
• IEC 529, IP66
Construction
• Body and cover are formed from 16 gauge steel.
• Smooth, continuously welded seams without knockouts, cutouts,
or holes.
• Formed lip on enclosure to exclude flowing liquids and
contaminants.
• 14 gauge welded brackets provide for enclosure mounting.
• Continuously hinged cover has 304 stainless steel hinges and
provides 180º opening.
• Door latches feature the added safety of quarter turn slot requiring
use of tool for opening.
• Quarter turn latches formed from black zinc diecast.
• Oil resistant gaskets are permanently secured.
• Models larger than 4”x4” include a removable 14 gauge
galvanized inner panel.
Finish
• Cover and enclosure are finished in recoatable smooth ANSI/ASA
61 gray powder coating.
• Inner panels are unpainted galvanized steel, (50-200HP) and
above are painted white.
CONTACTOR
Standards
• Compact frame sizes from 7A to 250A
• Common accessories for all contactor sizes
• Panel or 35mm DIN rail mountable
• Simple to exchange coils
• Finger-touch protection
• Front and side mountable auxiliary contact blocks
• Replaceable main contacts for entire line
• Positively driven contacts and operations
• Front and side mounted auxiliary contacts
• Wide coil voltage selection
• Designed to perform over 1 million electrical and 10 million
mechanical operations
Certifications:
• cULus
• IEC 60947
• CE
• Test/Reset button
• Selectable Manual or Automatic Reset
• Separate mounting capability via screws or DIN rail
CONTROL POWER TRANSFORMER
Standards
• Control Power Transformers meet or exceeds the
standards established by UL, CSA, IRC, ANSI, NEMA.
Standard
UL (ANSI/UL 506)
CSA (C22-2 No. 66)
IEC 989
NEMA (ST-1)
File No.
E50394
LR3902
VA Size
All Units
All Units
All Molded Units
All Units
Core & Coils
• High quality, high permeability silicon steel laminations.
• All-welded construction.
• Computer designed copper wound coils with optimum turns ratio.
Finger Safe Terminal Covers
• Finger safe terminal covers for both fused and un-fused terminals, in
a clear, see through finish, are available for all molded transformer
series units.
Standard Secondary Fuse Clips
• Each transformer has a single secondary and comes with a factory
installed secondary fuse kit. (fuses are not included.)
• Accommodates 13/32” x 1-1/2” Midget Fuse.
PUSH BUTTONS
Standards: IEC/EN 60947-5-1, VDE 0660,
NFC63140, UL 508, UL 50, CENELEC EN50007
Degree of Protection: IP66 (IEC/EN60529)
UL Ratings: Type 1,2,3,3R,3S,4,4X,5,12,12K e 13
Contacts Resistance: ≤ 25mΩ (IEC/EN 60255)
Electrical Shock Protection: Class II
Temperature Range: -25ºC to 70ºC
Vibration Resistance (IEC/EN 6068-2-6): 16g with frequency
range from 40 to 500HZ and max shifting 0.75mm (peak-to-peak)
FUSES
• Time Delay, Rejection Type Fast Acting; Branch Circuit Fuse
Class CC, Class CC- Rejection Feature
Voltage Rating: 600 Volts AC or Less
Interrupting Rating: 200,000A RMS Sym
Agency Approvals: Std. 248-4, Class CC, UL Listed, Guide JDDZ,
File E4273, CSA Certified, Class 1422-01, File 53787
OVERLOAD
Standards
• Phase failure/unbalance sensitivity
• Ambient temperature compensation
• Isolated N.C. “Trip” and N.O. “Alarm” auxiliary contacts
• Class 10 tripping characteristics
• “Trip Free” design
• Field adjustable trip current setting
8
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
Technical Drawing
ES4 SERIES
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
9
ES4 SERIES
Non-Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 4, 3R, 12, 1
1/4 HP - 250 HP (230V)
Standard Features:
• Motor Starters are in stock and ready to go.
• Heavy duty enclosure which is painted steel with ANSI 61 gray powder coating.
• All components are mounted to enclosure back pan.
• Enclosure is rated for NEMA 4, 3R, 13, 12, 1 applications.
• IEC Contactor with adjustable thermal overload (Class 10).
• NEMA, UL, CSA & IEC rated components only.
• A wide range of standard options make it possible to adapt a “standard” control
to your particular needs.
• Oversized Control Power Transformer (optional).
• Units are assembled, pre-wired and ready to go straight out of the box.
HP
0.25
FULL LOAD AMPS @
230V/3PHASE/60HZ
1.4
OVERALL
DIMENSIONS
OVERALL
MOUNTING
BASE PART NUMBER
LIST PRICE
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-0.25-230-000000
$699.00
CH-ES4-0.5-230-000000
$699.00
0.5
2.2
10”H x 10”W x 6”D
10.75”H x 8”W
0.75
3.2
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-0.75-230-000000
$699.00
1
4.2
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-1-230-000000
$699.00
1.5
6.0
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-1.5-230-000000
$699.00
2
6.8
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-2-230-000000
$699.00
3
9.6
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-3-230-000000
$711.00
5
15.2
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-5-230-000000
$764.00
7.5
22
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-7.5-230-000000
$801.00
CH-ES4-10-230-000000
$870.00
10
28
10”H x 10”W x 6”D
10.75”H x 8”W
15
42
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-15-230-000000
$960.00
20
54
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4-20-230-000000
$1,009.00
25
68
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4-25-230-000000
$1,030.00
30
80
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4-30-230-000000
$1,206.00
40
104
16”H x 14”W x 10”D
16.75”H x 12”W
CH-ES4-40-230-000000
$1,548.00
50
130
16”H x 14”W x 10”D
16.75”H x 12”W
CH-ES4-50-230-000000
$1,684.00
60
154
20”H x 20”W x 12”D
21.5”H x 18.5”W
CH-ES4-60-230-000000
$2,542.00
CH-ES4-75-230-000000
$4,006.00
75
192
20”H x 20”W x 12”D
21.5”H x 18.5”W
100
248
20”H x 20”W x 12”D
21.5”H x 18.5”W
CH-ES4-100-230-000000
$4,803.00
125
312
20”H x 20”W x 12”D
21.5”H x 18.5”W
CH-ES4-125-230-000000
$5,458.00
150
360
20”H x 20”W x 12”D
21.5”H x 18.5”W
CH-ES4-150-230-000000
$6,109.00
200
480
20”H x 20”W x 12”D
21.5”H x 18.5”W
CH-ES4-200-230-000000
$9,489.00
250
602
24”H x 24”W x 16”D
25.5”H x 22.5”W
CH-ES4-250-230-000000
$13,166.00
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
10
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
ES4 SERIES: STANDARD OPTIONS
Non-Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 4, 3R, 12, 1
(230V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$38.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$76.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$36.00
2
H-O-A Switch
$34.00
3
ON-OFF Switch
$24.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages. Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
0
1
2
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 15 HP)
$125.00
None
$0.00
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 60hp
$36.00
2
120VAC Transformer (20 - 30 HP)
$147.00
• 75hp –250hp
$63.00
3
120VAC Transformer (40 - 50 HP)
$179.00
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 10hp
$59.00
4
120VAC Transformer (60 - 100 HP)
$200.00
• 15hp - 250hp
$125.00
5
120VAC Transformer (125 - 250 HP)
$238.00
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
two-pole primary fuse block. Fuses are installed in both the primary and
Examples are 15HP, 230 V Starter in a NEMA 4 enclosure with H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
BASIC
MODEL
HP
CH ES4
15
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
VOLTS
230 OPTION CODES
A B C D E F
0 2 0 2 1 1
11
ES4 SERIES
Non-Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 4, 3R, 12, 1
1/4 HP - 300 HP (380V)
Standard Features:
• Motor Starters are in stock and ready to go.
• Heavy duty enclosure which is painted steel with ANSI 61 gray powder coating.
• All components are mounted to enclosure back pan.
• Enclosure is rated for NEMA 4, 3R, 13, 12, 1 applications.
• IEC Contactor with adjustable thermal overload (Class 10).
• NEMA, UL, CSA & IEC rated components only.
• A wide range of standard options make it possible to adapt a “standard” control
to your particular needs.
• Oversized Control Power Transformer (optional).
• Units are assembled, pre-wired and ready to go straight out of the box.
HP
0.25
FULL LOAD AMPS @
380V/3PHASE/50HZ
0.75
OVERALL
DIMENSIONS
OVERALL
MOUNTING
10”H x 10”W x 6”D
BASE PART NUMBER
LIST PRICE
10.75”H x 8”W
CH-ES4-0.25-380-000000
$713.00
$713.00
0.5
1.3
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-0.5-380-000000
0.75
1.8
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-0.75-380-000000
$713.00
1
2.3
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-1-380-000000
$713.00
1.5
3.3
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-1.5-380-000000
$713.00
2
4.3
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-2-380-000000
$713.00
3
6.1
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-3-380-000000
$713.00
5
9.7
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-5-380-000000
$725.00
7.5
14
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-7.5-380-000000
$764.00
$823.00
10
18
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-10-380-000000
15
27
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-15-380-000000
$894.00
20
34
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4-20-380-000000
$973.00
25
43
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4-25-380-000000
$1,021.00
30
51
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4-30-380-000000
$1,041.00
40
66
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4-40-380-000000
$1,240.00
50
83
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4-50-380-000000
$1,353.00
60
103
16”H x 14”W x 10”D
16.75”H x 12”W
CH-ES4-60-380-000000
$1,603.00
CH-ES4-75-380-000000
$2,129.00
75
128
16”H x 14”W x 10”D
16.75”H x 12”W
100
165
16”H x 14”W x 10”D
16.75”H x 12”W
CH-ES4-100-380-000000
$2,571.00
125
208
20”H x 20”W x 12”D
21.5”H x 18.5”W
CH-ES4-125-380-000000
$3,187.00
150
240
20”H x 20”W x 12”D
21.5”H x 18.5”W
CH-ES4-150-380-000000
$5,117.00
200
320
20”H x 20”W x 12”D
21.5”H x 18.5”W
CH-ES4-200-380-000000
$5,458.00
250
403
20”H x 20”W x 12”D
21.5”H x 18.5”W
CH-ES4-250-380-000000
$6,652.00
300
482
20”H x 20”W x 12”D
21.5”H x 18.5”W
CH-ES4-300-380-000000
$10,222.00
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
12
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
ES4 SERIES: STANDARD OPTIONS
Non-Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 4, 3R, 12, 1
(380V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$38.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$76.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$36.00
2
H-O-A Switch
$34.00
3
ON-OFF Switch
$24.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages. Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
0
1
2
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 10 HP)
$152.00
None
$0.00
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 100hp
$36.00
2
120VAC Transformer (15 - 50 HP)
$182.00
• 125hp - 300hp
$63.00
3
120VAC Transformer (60 - 100 HP)
$226.00
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 100hp
$59.00
4
120VAC Transformer (125 - 200 HP)
$254.00
• 125hp - 300hp
$125.00
5
120VAC Transformer (250 - 300 HP)
$306.00
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
two-pole primary fuse block. Fuses are installed in both the primary and
Examples are 15HP, 380V Starter in a NEMA 4 enclosure with H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
CH BASIC
MODEL
HP
VOLTS
ES4
15
380 SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
13
ES4 SERIES
Non-Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 4, 3R, 12, 1
1/4 HP - 500 HP (460V)
Standard Features:
• Motor Starters are in stock and ready to go.
• Heavy duty enclosure which is painted steel with ANSI 61 gray powder coating.
• All components are mounted to enclosure back pan.
• Enclosure is rated for NEMA 4, 3R, 13, 12, 1 applications.
• IEC Contactor with adjustable thermal overload (Class 10).
• NEMA, UL, CSA & IEC rated components only.
• A wide range of standard options make it possible to adapt a “standard” control
to your particular needs.
• Oversized Control Power Transformer (optional).
• Units are assembled, pre-wired and ready to go straight out of the box.
HP
FULL LOAD AMPS @
460V/3PHASE/60HZ
OVERALL
DIMENSIONS
OVERALL
MOUNTING
BASE PART NUMBER
LIST PRICE
0.25
0.7
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-0.25-460-000000
$713.00
0.5
1.1
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-0.5-460-000000
$713.00
0.75
1.6
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-0.75-460-000000
$713.00
CH-ES4-1-460-000000
$713.00
1
2.1
10”H x 10”W x 6”D
10.75”H x 8”W
1.5
3
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-1.5-460-000000
$713.00
2
3.4
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-2-460-000000
$713.00
$713.00
3
4.8
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-3-460-000000
5
7.6
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-5-460-000000
$725.00
7.5
11
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-7.5-460-000000
$752.00
10
14
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-10-460-000000
$764.00
15
21
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-15-460-000000
$823.00
CH-ES4-20-460-000000
$894.00
20
27
10”H x 10”W x 6”D
10.75”H x 8”W
25
34
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4-25-460-000000
$973.00
30
40
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4-30-460-000000
$991.00
$1,021.00
40
52
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4-40-460-000000
50
65
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4-50-460-000000
$1,041.00
60
77
16”H x 14”W x 10”D
16.75”H x 12”W
CH-ES4-60-460-000000
$1,401.00
$1,603.00
75
96
16”H x 14”W x 10”D
16.75”H x 12”W
CH-ES4-75-460-000000
100
124
16”H x 14”W x 10”D
16.75”H x 12”W
CH-ES4-100-460-000000
$1,717.00
CH-ES4-125-460-000000
$2,575.00
125
156
20”H x 20”W x 12”D
21.5”H x 18.5”W
150
180
20”H x 20”W x 12”D
21.5”H x 18.5”W
CH-ES4-150-460-000000
$3,187.00
200
240
20”H x 20”W x 12”D
21.5”H x 18.5”W
CH-ES4-200-460-000000
$5,117.00
$5,458.00
250
302
20”H x 20”W x 12”D
21.5”H x 18.5”W
CH-ES4-250-460-000000
300
361
20”H x 20”W x 12”D
21.5”H x 18.5”W
CH-ES4-300-460-000000
$6,537.00
350
414
20”H x 20”W x 12”D
21.5”H x 18.5”W
CH-ES4-350-460-000000
$10,222.00
$10,222.00
400
477
20”H x 20”W x 12”D
21.5”H x 18.5”W
CH-ES4-400-460-000000
450
515
24”H x 24”W x 16”D
25.5”H x 22.5”W
CH-ES4-450-460-000000
$14,245.00
24”H x 24”W x 16”D
25.5”H x 22.5”W
CH-ES4-500-460-000000
$14,245.00
500
590
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
14
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
ES4 SERIES: STANDARD OPTIONS
Non-Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 4, 3R, 12, 1
(460V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$38.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$76.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$36.00
2
H-O-A Switch
$34.00
3
ON-OFF Switch
$24.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages. Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
0
1
2
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 25 HP)
$125.00
None
$0.00
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 125hp
$36.00
2
120VAC Transformer (30 - 50 HP)
$147.00
• 150hp - 500hp
$63.00
3
120VAC Transformer (60 - 100 HP)
$179.00
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 20hp
$59.00
4
120VAC Transformer (125 - 200 HP)
$200.00
$125.00
5
120VAC Transformer (250 - 500 HP)
$238.00
• 25hp - 500hp
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
two-pole primary fuse block. Fuses are installed in both the primary and
Examples are 15HP, 460 V Starter in a NEMA 4 enclosure with H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
CH BASIC
MODEL
HP
VOLTS
ES4
15
460 SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
15
ES4 SERIES
Non-Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 4, 3R, 12, 1
1/4 HP - 500 HP (575V)
Standard Features:
• Motor Starters are in stock and ready to go.
• Heavy duty enclosure which is painted steel with ANSI 61 gray powder coating.
• All components are mounted to enclosure back pan.
• Enclosure is rated for NEMA 4, 3R, 13, 12, 1 applications.
• IEC Contactor with adjustable thermal overload (Class 10).
• NEMA, UL, CSA & IEC rated components only.
• A wide range of standard options make it possible to adapt a “standard” control
to your particular needs.
• Oversized Control Power Transformer (optional).
• Units are assembled, pre-wired and ready to go straight out of the box.
FULL LOAD AMPS @
HP
575V/3PHASE/60HZ
OVERALL
DIMENSIONS
OVERALL
MOUNTING
BASE PART NUMBER
LIST PRICE
0.25
0.64
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-0.25-575-000000
$713.00
0.5
0.9
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-0.5-575-000000
$713.00
0.75
1.3
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-0.75-575-000000
$713.00
1
1.7
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-1-575-000000
$713.00
1.5
2.4
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-1.5-575-000000
$713.00
$713.00
2
2.7
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-2-575-000000
3
3.9
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-3-575-000000
$713.00
5
6.1
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-5-575-000000
$713.00
7.5
9
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-7.5-575-000000
$725.00
10
11
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-10-575-000000
$752.00
15
17
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-15-575-000000
$783.00
20
22
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-20-575-000000
$823.00
25
27
10”H x 10”W x 6”D
10.75”H x 8”W
CH-ES4-25-575-000000
$894.00
$973.00
30
32
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4-30-575-000000
40
41
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4-40-575-000000
$991.00
50
52
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4-50-575-000000
$1,021.00
60
62
16”H x 14”W x 10”D
16.75”H x 12”W
CH-ES4-60-575-000000
$1,191.00
75
77
16”H x 14”W x 10”D
16.75”H x 12”W
CH-ES4-75-575-000000
$1,401.00
100
99
16”H x 14”W x 10”D
16.75”H x 12”W
CH-ES4-100-575-000000
$1,603.00
125 1
125
20”H x 20”W x 12”D
21.5”H x 18.5”W
CH-ES4-125-575-000010
$2,130.00
150 1
144
20”H x 20”W x 12”D
21.5”H x 18.5”W
CH-ES4-150-575-000010
$2,542.00
$4,006.00
200
1
192
20”H x 20”W x 12”D
21.5”H x 18.5”W
CH-ES4-200-575-000010
250
1
242
20”H x 20”W x 12”D
21.5”H x 18.5”W
CH-ES4-250-575-000010
$4,803.00
300 1
289
20”H x 20”W x 12”D
21.5”H x 18.5”W
CH-ES4-300-575-000010
$5,458.00
1
336
20”H x 20”W x 12”D
21.5”H x 18.5”W
CH-ES4-350-575-000010
$6,109.00
400 1
382
20”H x 20”W x 12”D
21.5”H x 18.5”W
CH-ES4-400-575-000010
$6,109.00
450 1
412
24”H x 24”W x 16”D
25.5”H x 22.5”W
CH-ES4-450-575-000010
$9,732.00
1
472
24”H x 24”W x 16”D
25.5”H x 22.5”W
CH-ES4-500-575-000010
$9,732.00
350
500
1 For Starters 575V, 125 HP - 500 HP, Option E must be selected.
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
16
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
ES4 SERIES: STANDARD OPTIONS
Non-Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 4, 3R, 12, 1
(575V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$38.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$76.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$36.00
2
H-O-A Switch
$34.00
3
ON-OFF Switch
$24.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages. Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
0
1
2
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 25 HP)
$160.00
None
$0.00
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 150hp
$36.00
2
120VAC Transformer (30 - 50 HP)
$193.00
• 200hp - 500hp
$63.00
3
120VAC Transformer (60 - 100 HP)
$240.00
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 25hp
$59.00
4
120VAC Transformer (125 - 200 HP)
$271.00
• 30hp - 500hp
$125.00
5
120VAC Transformer (250 - 500 HP)
$327.00
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
two-pole primary fuse block. Fuses are installed in both the primary and
Examples are 15HP, 575V Starter in a NEMA 4 enclosure with H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
CH BASIC
MODEL
HP
VOLTS
ES4
15
575
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
17
FVNR Combination Motor Starters 1/4 HP – 500 HP
CS4 SERIES
18
Heavy duty enclosure which is painted steel with ANSI 61 gray powder coating. All components
are mounted to enclosure’s back pan. Enclosure is rated for NEMA 4, 3R, 13, 12, 1 applications.
IEC Contactor with adjustable thermal overload (Class 10). NEMA, UL, CSA & IEC rated components
only. A wide range of standard options make it possible to adapt a “standard” control to your particular
needs. Oversized Control Power Transformer (optional). Units are assembled, pre-wired and ready to go
straight out of the box. Molded Case Circuit Breaker with through-the-door handle.
Technical Data and Specifications
Core & Coils
• High quality, high permeability silicon steel laminations.
• All-welded construction.
• Computer designed copper wound coils with optimum turns ratio.
Finger Safe Terminal Covers
• Finger safe terminal covers for both fused and un-fused terminals, in
a clear, see through finish, are available for all molded transformer
series units.
Standard Secondary Fuse Clips
• Each transformer has a single secondary and comes with a factory
installed secondary fuse kit. (fuses are not included.)
• Accommodates 13/32” x 1-1/2” Midget Fuse.
CIRCUIT BREAKERS
Thermal-Magnetic Circuit Breaker with Non-interchangeable
Trip Units
• 15 –600 Amperes.
• 120, 240, 277, 480Y/277, 600Y/347, 690V AC 50/60Hz, 125,
125/250V DC.
• 1, 2 and 3 poles.
Standards and Certifications
Molded case circuit breakers are designed to conform with
the following standards:
• Underwriters Laboratories, Inc., Standard UL489, Molded Case Circuit Breakers &
Circuit Breaker Enclosures.
• National Electrical Manufacturers Association Standard Publication
No. AB1-1993, Molded Case Circuit Breakers.
• Australian Standard AS 2184, Molded Case Circuit Breakers.
• British Standards Institution Standard BS 4752: Part 1,Switchgear & Control Gear
Part 1: Circuit Breakers.
• Canadian Standards Association Standard C22.2 No. 5, Service Entrance & Branch
Circuit Breakers.
• International Electrotechnical Commission Recommendations IEC 157-1, Circuit
Breakers.
• Japanese T-Mark Standard Molded Case Circuit Breakers.
• South African Bureau of Standards, Standard SABS 156, Standard Specification for
Molded Case Circuit Breakers.
• Swiss Electro-Technical Association Standard SEV 157-1, Safety
Regulations for Circuit Breakers.
• Union Technique de l’Electricite Switchgear & Control Gear Circuit Breaker
Requirements.
• Verband Deutscher Elektrotechniker (Association of German Electrical Engineers)
Standard VDE 0660, Low Voltage Switchgear & Control Gear, CBs.
Conformance with these standards satisfies most local and international codes,
assuming user acceptability and simplified application.
Innovation
New innovative design allows higher MCP-Starter combination interrupting ratings.
Operator
Door mounted, front rotary operating handle allows for external operation of the
interior mounted motor circuit protector. The unit is pad-lockable and includes a door
interlock mechanism. Available in NEMA 1, 3R, 12 and 4/4X ratings to cover a wide
array of applications and environments.
Molded case circuit breakers equal or exceed Federal Specification Classification
W-C 475b requirements for the particular class associated with the circuit breaker
frame being considered.
PUSH BUTTONS
Standards: IEC/EN 60947-5-1, VDE 0660,
NFC63140, UL 508, UL 50, CENELEC EN50007
Degree of Protection: IP66 (IEC/EN60529)
UL Ratings: Type 1,2,3,3R,3S,4,4X,5,12,12K e 13
Contacts Resistance: ≤ 25mΩ (IEC/EN 60255)
Electrical Shock Protection: Class II
Temperature Range: -25ºC to 70ºC
Vibration Resistance (IEC/EN 6068-2-6): 16g with frequency
range from 40 to 500HZ and max shifting 0.75mm (peak-to-peak)
FUSES
• Time Delay, Rejection Type Fast Acting; Branch Circuit Fuse
Class CC, Class CC- Rejection Feature
Voltage Rating: 600 Volts AC or Less
Interrupting Rating: 200,000A RMS Sym
Agency Approvals: Std. 248-4, Class CC, UL Listed, Guide JDDZ,
File E4273, CSA Certified, Class 1422-01, File 53787
ENCLOSURE
Applications
• Designed to enclose electrical and/or electronic equipment and
protect against harsh, industrial environments.
Standards
• UL 508 Type 3R, 4, 12 and 13
• CSA Type 3R, 4, 12 and 13
Complies with:
• NEMA Type 3R, 4, 12 and 13
• IEC 529, IP66
Construction
• Body and cover are formed from 16 gauge steel.
• Smooth, continuously welded seams without knockouts, cutouts,
or holes.
• Formed lip on enclosure to exclude flowing liquids and
contaminants.
• 14 gauge welded brackets provide for enclosure mounting.
• Continuously hinged cover has 304 stainless steel hinges and
provides 180º opening.
• Door latches feature the added safety of quarter turn slot requiring
use of tool for opening.
• Quarter turn latches formed from black zinc diecast.
• Oil resistant gaskets are permanently secured.
• Models larger than 4”x4” include a removable 14 gauge
galvanized inner panel.
Finish
• Cover and enclosure are finished in recoatable smooth ANSI/ASA
61 gray powder coating.
• Inner panels are unpainted galvanized steel, (50-200HP) and
above are painted white.
CONTACTOR
Standards
• Compact frame sizes from 7A to 250A
• Common accessories for all contactor sizes
• Panel or 35mm DIN rail mountable
• Simple to exchange coils
• Finger-touch protection
• Front and side mountable auxiliary contact blocks
• Replaceable main contacts for entire line
• Positively driven contacts and operations
• Front and side mounted auxiliary contacts
• Wide coil voltage selection
• Designed to perform over 1 million electrical and 10 million
mechanical operations
Certifications:
• cULus
• IEC 60947
• CE
OVERLOAD
Standards
• Phase failure/unbalance sensitivity
• Ambient temperature compensation
• Isolated N.C. “Trip” and N.O. “Alarm” auxiliary contacts
• Class 10 tripping characteristics
• “Trip Free” design
• Field adjustable trip current setting
• Test/Reset button
• Selectable Manual or Automatic Reset
• Separate mounting capability via screws or DIN rail
CONTROL POWER TRANSFORMER
Standards
• Control Power Transformers meet or exceeds the
standards established by UL, CSA, IRC, ANSI, NEMA.
Standard
File No.
VA Size
All Units
UL (ANSI/UL 506)
E50394
All Units
CSA (C22-2 No. 66)
LR3902
All Molded Units
IEC 989
All Units
NEMA (ST-1)
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
Technical Drawing
CS4 SERIES
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
19
CS4 SERIES
Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 4, 3R, 12, 1
1/4 HP - 250 HP (230V)
Standard Features:
• Motor Starters are in stock and ready to go.
• Heavy duty enclosure is painted steel with ANSI 61 gray powder coating.
• All components are mounted to enclosure back pan.
• Enclosure is rated for NEMA 4, 3R, 13, 12, 1 applications.
• IEC Contactor with adjustable thermal overload (Class 10).
• NEMA, UL, CSA & IEC rated components only.
• A wide range of standard options make it possible to adapt a “standard” control
to your particular needs.
• Oversized Control Power Transformer (optional).
• Molded case circuit breaker with through-the-door handle.
• Units are assembled, pre-wired and ready to go straight out of the box.
HP
0.25
FULL LOAD AMPS @
230V/3PHASE/60HZ
1.4
OVERALL
DIMENSIONS
OVERALL
MOUNTING
14”H x 12”W x 8”D
BASE PART NUMBER
LIST PRICE
14.75”H x 10”W
CH-CS4-0.25-230-000000
$1,293.00
$1,293.00
0.5
2.2
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-0.5-230-000000
0.75
3.2
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-0.75-230-000000
$1,293.00
1
4.2
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-1-230-000000
$1,293.00
1.5
6.0
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-1.5-230-000000
$1,293.00
2
6.8
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-2-230-000000
$1,293.00
3
9.6
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-3-230-000000
$1,305.00
5
15.2
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-5-230-000000
$1,358.00
7.5
22
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-7.5-230-000000
$1,395.00
$1,575.00
10
28
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-10-230-000000
15
42
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-15-230-000000
$1,665.00
20
54
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CS4-20-230-000000
$2,094.00
25
68
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CS4-25-230-000000
$2,115.00
30
80
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CS4-30-230-000000
$2,291.00
40
104
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CS4-40-230-000000
$2,855.00
50
130
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CS4-50-230-000000
$2,991.00
60
154
24”H x 24”W x 12”D
25.5”H x 22.5”W
CH-CS4-60-230-000000
$4,244.00
$5,708.00
75
192
24”H x 24”W x 12”D
25.5”H x 22.5”W
CH-CS4-75-230-000000
100
248
24”H x 24”W x 12”D
25.5”H x 22.5”W
CH-CS4-100-230-000000
$8,300.00
125
312
36”H x 30”W x 16”D
37.5”H x 28.5”W
CH-CS4-125-230-000000
$9,516.00
150
360
36”H x 30”W x 16”D
37.5”H x 28.5”W
CH-CS4-150-230-000000
$10,166.00
200
480
36”H x 30”W x 16”D
37.5”H x 28.5”W
CH-CS4-200-230-000000
$15,648.00
250
602
48”H x 36”W x 16”D
49.5”H x 34.5”W
CH-CS4-250-230-000000
$23,898.00
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
20
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
CS4 SERIES: STANDARD OPTIONS
Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 4, 3R, 12, 1
(230V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$38.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$76.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$36.00
2
H-O-A Switch
$34.00
3
ON-OFF Switch
$24.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages. Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
0
1
2
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 15 HP)
$125.00
None
$0.00
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 60hp
$36.00
2
120VAC Transformer (20 - 30 HP)
$147.00
• 75hp - 250hp
$63.00
3
120VAC Transformer (40 - 50 HP)
$179.00
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 10hp
$59.00
4
120VAC Transformer (60 - 100 HP)
$200.00
• 15hp - 250hp
$125.00
5
120VAC Transformer (125 - 250 HP)
$238.00
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
two-pole primary fuse block. Fuses are installed in both the primary and
Examples are 15HP, 230 V Starter in a NEMA 4 enclosure with H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
CH BASIC
MODEL
HP
VOLTS
CS4
15
230
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
21
CS4 SERIES
Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 4, 3R, 12, 1
1/4 HP - 300 HP (380V)
Standard Features:
• Motor Starters are in stock and ready to go.
• Heavy duty enclosure is painted steel with ANSI 61 gray powder coating.
• All components are mounted to enclosure back pan.
• Enclosure is rated for NEMA 4, 3R, 13, 12, 1 applications.
• IEC Contactor with adjustable thermal overload (Class 10).
• NEMA, UL, CSA & IEC rated components only.
• A wide range of standard options make it possible to adapt a “standard” control
to your particular needs.
• Oversized Control Power Transformer (optional).
• Molded case circuit breaker with through-the-door handle.
• Units are assembled, pre-wired and ready to go straight out of the box.
HP
FULL LOAD AMPS @
380V/3PHASE/50HZ
OVERALL
DIMENSIONS
OVERALL
MOUNTING
BASE PART NUMBER
LIST PRICE
0.25
0.75
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-0.25-380-000000
$1,306.00
0.5
1.3
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-0.5-380-000000
$1,306.00
0.75
1.8
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-0.75-380-000000
$1,306.00
1
2.3
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-1-380-000000
$1,306.00
CH-CS4-1.5-380-000000
$1,306.00
1.5
3.3
14”H x 12”W x 8”D
14.75”H x 10”W
2
4.3
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-2-380-000000
$1,306.00
3
6.1
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-3-380-000000
$1,306.00
5
9.7
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-5-380-000000
$1,319.00
7.5
14
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-7.5-380-000000
$1,358.00
10
18
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-10-380-000000
$1,417.00
15
27
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-15-380-000000
$1,786.00
20
34
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-20-380-000000
$1,660.00
CH-CS4-25-380-000000
$1,708.00
25
43
14”H x 12”W x 8”D
14.75”H x 10”W
30
51
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CS4-30-380-000000
$1,768.00
40
66
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CS4-40-380-000000
$2,326.00
50
83
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CS4-50-380-000000
$2,439.00
60
103
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CS4-60-380-000000
$2,910.00
75
128
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CS4-75-380-000000
$3,436.00
100
165
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CS4-100-380-000000
$4,105.00
125
208
24”H x 24”W x 12”D
25.5”H x 22.5”W
CH-CS4-125-380-000000
$4,889.00
150
240
24”H x 24”W x 12”D
25.5”H x 22.5”W
CH-CS4-150-380-000000
$8,614.00
200
320
24”H x 24”W x 12”D
25.5”H x 22.5”W
CH-CS4-200-380-000000
$8,955.00
250
403
36”H x 30”W x 16”D
37.5”H x 28.5”W
CH-CS4-250-380-000000
$10,710.00
300
482
36”H x 30”W x 16”D
37.5”H x 28.5”W
CH-CS4-300-380-000000
$16,381.00
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
22
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
CS4 SERIES: STANDARD OPTIONS
Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 4, 3R, 12, 1
(380V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$38.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$76.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$36.00
2
H-O-A Switch
$34.00
3
ON-OFF Switch
$24.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages. Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
0
1
2
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 10 HP)
$152.00
None
$0.00
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 100hp
$36.00
2
120VAC Transformer (15 - 50 HP)
$182.00
• 125hp - 300hp
$63.00
3
120VAC Transformer (60 - 100 HP)
$126.00
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 15hp
$59.00
4
120VAC Transformer (125 - 200 HP)
$254.00
• 20p - 300hp
$125.00
5
120VAC Transformer (250 - 300 HP)
$306.00
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
two-pole primary fuse block. Fuses are installed in both the primary and
Examples are 15HP, 380 V Starter in a NEMA 4 enclosure with H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
CH BASIC
MODEL
HP
VOLTS
CS4
15
380
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
23
CS4 SERIES
Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 4, 3R, 12, 1
1/4 HP - 300 HP (460V)
Standard Features:
• Motor Starters are in stock and ready to go.
• Heavy duty enclosure is painted steel with ANSI 61 gray powder coating.
• All components are mounted to enclosure back pan.
• Enclosure is rated for NEMA 4, 3R, 13, 12, 1 applications.
• IEC Contactor with adjustable thermal overload (Class 10).
• NEMA, UL, CSA & IEC rated components only.
• A wide range of standard options make it possible to adapt a “standard” control
to your particular needs.
• Oversized Control Power Transformer (optional).
• Molded case circuit breaker with through-the-door handle.
• Units are assembled, pre-wired and ready to go straight out of the box.
HP
FULL LOAD AMPS @
460V/3PHASE/60HZ
OVERALL
DIMENSIONS
OVERALL
MOUNTING
BASE PART NUMBER
LIST PRICE
0.25
0.7
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-0.25-460-000000
$1,306.00
0.5
1.1
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-0.5-460-000000
$1,306.00
0.75
1.6
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-0.75-460-000000
$1,306.00
CH-CS4-1-460-000000
$1,306.00
1
2.1
14”H x 12”W x 8”D
14.75”H x 10”W
1.5
3
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-1.5-460-000000
$1,306.00
2
3.4
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-2-460-000000
$1,306.00
3
4.8
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-3-460-000000
$1,306.00
5
7.6
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-5-460-000000
$1,319.00
7.5
11
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-7.5-460-000000
$1,346.00
10
14
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-10-460-000000
$1,358.00
15
21
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-15-460-000000
$1,417.00
CH-CS4-20-460-000000
$1,599.00
20
27
14”H x 12”W x 8”D
14.75”H x 10”W
25
34
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-25-460-000000
$1,660.00
30
40
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CS4-30-460-000000
$1,718.00
40
52
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CS4-40-460-000000
$1,748.00
50
65
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CS4-50-460-000000
$2,126.00
60
77
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CS4-60-460-000000
$2,336.00
75
96
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CS4-75-460-000000
$2,910.00
100
124
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CS4-100-460-000000
$3,024.00
125
156
24”H x 24”W x 12”D
25.5”H x 22.5”W
CH-CS4-125-460-000000
$4,277.00
150
180
24”H x 24”W x 12”D
25.5”H x 22.5”W
CH-CS4-150-460-000000
$4,889.00
200
240
24”H x 24”W x 12”D
25.5”H x 22.5”W
CH-CS4-200-460-000000
$8,614.00
250
302
36”H x 30”W x 16”D
37.5”H x 28.5”W
CH-CS4-250-460-000000
$9,516.00
300
361
36”H x 30”W x 16”D
37.5”H x 28.5”W
CH-CS4-300-460-000000
$10,594.00
350
414
36”H x 30”W x 16”D
37.5”H x 28.5”W
CH-CS4-350-460-000000
$16,381.00
400
477
36”H x 30”W x 16”D
37.5”H x 28.5”W
CH-CS4-400-460-000000
$16,381.00
450
515
48”H x 36”W x 16”D
49.5”H x 34.5”W
CH-CS4-450-460-000000
$24,977.00
590
48”H x 36”W x 16”D
49.5”H x 34.5”W
CH-CS4-500-460-000000
$24,977.00
500
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
24
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
CS4 SERIES: STANDARD OPTIONS
Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 4, 3R, 12, 1
(460V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$38.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$76.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$36.00
2
H-O-A Switch
$34.00
3
ON-OFF Switch
$24.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages. Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
0
1
2
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 25 HP)
$125.00
None
$0.00
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 125hp
$36.00
2
120VAC Transformer (30 - 50 HP)
$147.00
• 150hp - 500hp
$63.00
3
120VAC Transformer (60 - 100 HP)
$179.00
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 20hp
$59.00
4
120VAC Transformer (125 - 200 HP)
$200.00
• 25hp - 500hp
$125.00
5
120VAC Transformer (250 - 500 HP)
$238.00
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
two-pole primary fuse block. Fuses are installed in both the primary and
Examples are 15HP, 460 V Starter in a NEMA 4 enclosure with H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
CH BASIC
MODEL
HP
VOLTS
CS4
15
460
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
25
CS4 SERIES
Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 4, 3R, 12, 1
1/4 HP - 500 HP (575V)
Standard Features:
• Motor Starters are in stock and ready to go.
• Heavy duty enclosure is painted steel with ANSI 61 gray powder coating.
• All components are mounted to enclosure back pan.
• Enclosure is rated for NEMA 4, 3R, 13, 12, 1 applications.
• IEC Contactor with adjustable thermal overload (Class 10).
• NEMA, UL, CSA & IEC rated components only.
• A wide range of standard options make it possible to adapt a “standard” control
to your particular needs.
• Oversized Control Power Transformer (optional).
• Molded case circuit breaker with through-the-door handle.
• Units are assembled, pre-wired and ready to go straight out of the box.
FULL LOAD AMPS @
HP
575V/3PHASE/50HZ
OVERALL
DIMENSIONS
OVERALL
MOUNTING
BASE PART NUMBER
LIST PRICE
0.25
0.64
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-0.25-575-000000
$1,306.00
0.5
0.9
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-0.5-575-000000
$1,306.00
0.75
1.3
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-0.75-575-000000
$1,306.00
$1,306.00
1
1.7
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-1-575-000000
1.5
2.4
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-1.5-575-000000
$1,306.00
2
2.7
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-2-575-000000
$1,306.00
3
3.9
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-3-575-000000
$1,306.00
5
6.1
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-5-575-000000
$1,306.00
7.5
9
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-7.5-575-000000
$1,319.00
10
11
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-10-575-000000
$1,346.00
15
17
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-15-575-000000
$1,376.00
$1,417.00
20
22
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-20-575-000000
25
27
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4-25-575-000000
$1,599.00
30
32
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CS4-30-575-000000
$1,700.00
40
41
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CS4-40-575-000000
$1,718.00
50
52
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CS4-50-575-000000
$1,748.00
60
62
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CS4-60-575-000000
$2,126.00
75
77
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CS4-75-575-000000
$2,336.00
100
99
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CS4-100-575-000000
$2,910.00
$3,604.00
125 1
125
24”H x 24”W x 12”D
25.5”H x 22.5”W
CH-CS4-125-575-000010
150 1
144
24”H x 24”W x 12”D
25.5”H x 22.5”W
CH-CS4-150-575-000010
$4,244.00
200 1
192
24”H x 24”W x 12”D
25.5”H x 22.5”W
CH-CS4-200-575-000010
$5,708.00
1
242
36”H x 30”W x 16”D
37.5”H x 28.5”W
CH-CS4-250-575-000010
$8,861.00
300 1
289
36”H x 30”W x 16”D
37.5”H x 28.5”W
CH-CS4-300-575-000010
$9,516.00
350 1
336
36”H x 30”W x 16”D
37.5”H x 28.5”W
CH-CS4-350-575-000010
$10,166.00
400 1
382
36”H x 30”W x 16”D
37.5”H x 28.5”W
CH-CS4-400-575-000010
$12,267.00
450 1
412
48”H x 36”W x 16”D
49.5”H x 34.5”W
CH-CS4-450-575-000010
$16,138.00
48”H x 36”W x 16”D
49.5”H x 34.5”W
CH-CS4-500-575-000010
$16,138.00
250
500
1
472
1 For Starters 575V, 125 HP - 500 HP, Option E must be selected.
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
26
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
CS4 SERIES: STANDARD OPTIONS
Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 4, 3R, 12, 1
(575V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$38.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$76.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$36.00
2
H-O-A Switch
$34.00
3
ON-OFF Switch
$24.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages. Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
0
1
2
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 25 HP)
$160.00
None
$0.00
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 150hp
$36.00
2
120VAC Transformer (30 - 50 HP)
$193.00
• 200hp - 500hp
$63.00
3
120VAC Transformer (60 - 100 HP)
$240.00
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 25hp
$59.00
4
120VAC Transformer (125 - 200 HP)
$271.00
• 30hp - 500hp
$125.00
5
120VAC Transformer (250 - 500 HP)
$327.00
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
two-pole primary fuse block. Fuses are installed in both the primary and
Examples are 15HP, 575 V Starter in a NEMA 4 enclosure with H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
CH BASIC
MODEL
HP
VOLTS
CS4
15
575
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
27
NEMA Rated Non-Combination Motor Starters (Sizes 0 – 7)
ENS4 SERIES
28
Heavy duty enclosure which is painted steel with ANSI 61 gray powder coating. All components
are mounted to enclosure’s back pan. Enclosure is rated for NEMA 4, 3R, 13, 12, 1 applications.
NEMA Rated Non-Reversing motor starter with three leg protection overload heaters (included
standard-sized to rated chart amps). Reset pushbutton is standard on all units. NEMA, UL, CSA
& IEC rated components only. A wide range of standard options make it possible to adapt a
“standard” control to your particular needs. Oversized Control Power Transformer (optional).
Units are assembled, pre-wired and ready to go straight out of the box.
Technical Data and Specifications
STARTER
Contactor and overload combinations designed
to meet NEMA standards and are extremely rugged.
• Meets or exceeds all NEMA, UL and CSA standards.
• Sizes based on standard NEMA classifications.
• Designed and built for a variety of demanding applications.
• Easy coil change and inspectable/replaceable contacts
• Adjustable/interchangeable heater packs for flexibility.
• Heaters available in ambient compensated and non-ambient
compensated.
ENCLOSURE
Applications
• Designed to enclose electrical and/or electronic equipment and
protect against harsh, industrial environments.
Standards
• UL 508 Type 3R, 4, 12 and 13
• CSA Type 3R, 4, 12 and 13
Complies with:
• NEMA Type 3R, 4, 12 and 13
• IEC 529, IP66
Construction
• Body and cover are formed from 16 gauge steel.
• Smooth, continuously welded seams without knockouts, cutouts,
or holes.
• Formed lip on enclosure to exclude flowing liquids and
contaminants.
• 14 gauge welded brackets provide for enclosure mounting.
• Continuously hinged cover has 304 stainless steel hinges and
provides 180º opening.
• Door latches feature the added safety of quarter turn slot requiring
use of tool for opening.
• Quarter turn latches formed from black zinc diecast.
• Oil resistant gaskets are permanently secured.
• Models larger than 4”x4” include a removable 14 gauge
galvanized inner panel.
Finish
• Cover and enclosure are finished in recoatable smooth ANSI/ASA
61 gray powder coating.
• Inner panels are unpainted galvanized steel, (50-200HP) and
above are painted white.
• Test/Reset button
• Selectable Manual or Automatic Reset
• Separate mounting capability via screws or DIN rail
CONTROL POWER TRANSFORMER
Standards
• Control Power Transformers meet or exceeds the
standards established by UL, CSA, IRC, ANSI, NEMA.
Standard
UL (ANSI/UL 506)
CSA (C22-2 No. 66)
IEC 989
NEMA (ST-1)
File No.
E50394
LR3902
VA Size
All Units
All Units
All Molded Units
All Units
Core & Coils
• High quality, high permeability silicon steel laminations.
• All-welded construction.
• Computer designed copper wound coils with optimum turns ratio.
Finger Safe Terminal Covers
• Finger safe terminal covers for both fused and un-fused terminals, in
a clear, see through finish, are available for all molded transformer
series units.
Standard Secondary Fuse Clips
• Each transformer has a single secondary and comes with a factory
installed secondary fuse kit. (fuses are not included.)
• Accommodates 13/32” x 1-1/2” Midget Fuse.
PUSH BUTTONS
Standards: IEC/EN 60947-5-1, VDE 0660,
NFC63140, UL 508, UL 50, CENELEC EN50007
Degree of Protection: IP66 (IEC/EN60529)
UL Ratings: Type 1,2,3,3R,3S,4,4X,5,12,12K e 13
Contacts Resistance: ≤ 25mΩ (IEC/EN 60255)
Electrical Shock Protection: Class II
Temperature Range: -25ºC to 70ºC
Vibration Resistance (IEC/EN 6068-2-6): 16g with frequency
range from 40 to 500HZ and max shifting 0.75mm (peak-to-peak)
FUSES
• Time Delay, Rejection Type Fast Acting; Branch Circuit Fuse
Class CC, Class CC- Rejection Feature
Voltage Rating: 600 Volts AC or Less
Interrupting Rating: 200,000A RMS Sym
Agency Approvals: Std. 248-4, Class CC, UL Listed, Guide JDDZ,
File E4273, CSA Certified, Class 1422-01, File 53787
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
Technical Drawing
ENS4 SERIES
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
29
ENS4 SERIES
Non-Combination, FVNR, NEMA Configuration
Enclosure Ratings: NEMA 4, 3R, 12, 1
1/4 HP - 250 HP (230V)
Standard Features:
• Motor Starters are in stock and ready to go.
• Heavy duty enclosure is painted steel with ANSI 61 gray powder coating.
• All components are mounted to enclosure back pan.
• Enclosure is rated for NEMA 4, 3R, 13, 12, 1 applications.
• IEC Contactor with adjustable thermal overload (Class 10).
• NEMA, UL, CSA & IEC rated components only.
• A wide range of standard options make it possible to adapt a “standard” control
to your particular needs.
• Oversized Control Power Transformer (optional).
• Molded case circuit breaker with through-the-door handle.
• Units are assembled, pre-wired and ready to go straight out of the box.
OVERALL
MOUNTING
NEMA
SIZE
1
2
3
4
5
6
FULL LOAD AMPS @
230V/3PHASE/60HZ
OVERALL
DIMENSIONS
0.5
2.2
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ENS4-0.5-230-000000
$895.00
0.75
1
3.2
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ENS4-0.75-230-000000
$895.00
4.2
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ENS4-1-230-000000
$895.00
1.5
6.0
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ENS4-1.5-230-000000
$895.00
2
3
6.8
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ENS4-2-230-000000
$895.00
9.6
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ENS4-3-230-000000
$895.00
5
15.2
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ENS4-5-230-000000
$956.00
7.5
22
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ENS4-7.5-230-000000
$956.00
10
15
28
16”H x 14”W x 8”D
16.75”H x 12”W
CH-ENS4-10-230-000000
$1,481.00
42
16”H x 14”W x 8”D
16.75”H x 12”W
CH-ENS4-15-230-000000
$1,481.00
$2,344.00
HP
HP
0.25
OVERALL
MOUNTING
DIMENSIONS
FULL LOAD AMPS @
12”H x 12”W x 6”D
12.75”H x 10”W
1.4
MOUNTING
OVERALL
BASE PART NUMBER
LIST PRICE
BASE CH-ENS4-0.25-230-000000
PART NUMBER
LIST PRICE
$895.00
54
20”H x 16”W x 10”D
21.5”H x 14.5”W
CH-ENS4-20-230-000000
68
20”H x 16”W x 10”D
21.5”H x 14.5”W
CH-ENS4-25-230-000000
$2,344.00
80
20”H x 16”W x 10”D
21.5”H x 14.5”W
CH-ENS4-30-230-000000
$2,344.00
104
20”H x 16”W x 10”D
21.5”H x 14.5”W
CH-ENS4-40-230-000000
$4,203.00
50
130
20”H x 16”W x 10”D
21.5”H x 14.5”W
CH-ENS4-50-230-000000
$4,203.00
60
154
30”H x 24”W x 12”D
31.5”H x 22.5”W
CH-ENS4-60-230-000000
$9,547.00
75
192
30”H x 24”W x 12”D
31.5”H x 22.5”W
CH-ENS4-75-230-000000
$9,547.00
100
248
30”H x 24”W x 12”D
31.5”H x 22.5”W
CH-ENS4-100-230-000000
$9,547.00
$19,594.00
20
25
30
40
125
312
36”H x 30”W x 16”D
37.5”H x 28.5”W
CH-ENS4-125-230-000000
150
360
36”H x 30”W x 16”D
37.5”H x 28.5”W
CH-ENS4-150-230-000000
$19,594.00
200
480
36”H x 30”W x 16”D
37.5”H x 28.5”W
CH-ENS4-200-230-000000
$19,594.00
250
602
48”H x 36”W x 16”D
49.5”H x 34.5”W
CH-ENS4-250-230-000000
Call Cordyne
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
30
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
ENS4 SERIES: STANDARD OPTIONS
Non-Combination, FVNR, NEMA Configuration,
Enclosure Ratings: NEMA 4, 3R, 12, 1
(230V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$38.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$76.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$36.00
2
H-O-A Switch
$34.00
3
ON-OFF Switch
$24.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages.Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
0
1
2
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
None
$0.00
1
120VAC Transformer (0.25 - 7.5 HP)
$125.00
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 15hp
• 20hp –100hp
• 125hp - 250hp
$68.00
$136.00
$444.00
2
120VAC Transformer (10 - 15 HP)
$147.00
3
120VAC Transformer (20 - 30 HP)
$179.00
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 15hp
• 20hp –100hp
• 125hp - 250hp
$136.00
$271.00
$888.00
4
120VAC Transformer (40 - 50 HP)
$200.00
5
120VAC Transformer (60 - 200 HP)
$238.00
6
120VAC Transformer (250 HP)
$347.00
Auxiliary contacts are stackable and mount to the side of the contactor
(left or right side).
Examples are 15HP, 230 V Starter in a NEMA 4 enclosure with H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
Control Power Transformers come standard with secondary fuse clip and a
two-pole primary fuse block. Fuses are installed in both the primary and
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
CH BASIC
MODEL
HP
VOLTS
ENS4
15
230
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
31
ENS4 SERIES
Non-Combination, FVNR, NEMA Configuration
Enclosure Ratings: NEMA 4, 3R, 12, 1
1/4 HP - 500 HP (460V)
Standard Features:
• Motor Starters are in stock and ready to go.
• Heavy duty enclosure which is painted steel with ANSI 61 gray powder coating.
• All components are mounted to enclosure back pan.
• Enclosure is rated for NEMA 4, 3R, 13, 12, 1 applications.
• NEMA rated non-reversing magnetic motor starter.
• Heavy duty enclosure for a variety of applications/NEMA ratings.
• Reset pushbutton is standard on all units.
• A wide range of standard options make it possible to adapt a “standard” control
to your particular needs.
• Oversized Control Power Transformer (optional).
• Three leg protection – overload heaters (included standard-sized to rated chart amps).
• All components are UL, CSA rated.
• Units are assembled, pre-wired and ready to go straight out of the box.
NEMA
SIZE
HP
HP
0.25
1
2
3
4
6
7
460V/3PHASE/60HZ
FULL LOAD AMPS @
0.7
OVERALL
DIMENSIONS
OVERALL
MOUNTING
DIMENSIONS
12.75”H x 10”W
12”H x 12”W
x 6”D
MOUNTING
OVERALL
BASE PART NUMBER
LIST PRICE
BASE PART
NUMBER
LIST PRICE$895.00
CH-ENS4-0.25-460-000000
0.5
1.1
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ENS4-0.5-460-000000
$895.00
0.75
1.6
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ENS4-0.75-460-000000
$895.00
1
2.1
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ENS4-1-460-000000
$895.00
1.5
3
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ENS4-1.5-460-000000
$895.00
2
3.4
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ENS4-2-460-000000
$895.00
3
4.8
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ENS4-3-460-000000
$895.00
5
7.6
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ENS4-5-460-000000
$895.00
CH-ENS4-7.5-460-000000
$956.00
7.5
11
12”H x 12”W x 6”D
12.75”H x 10”W
10
14
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ENS4-10-460-000000
$956.00
15
21
16”H x 14”W x 8”D
16.75”H x 12”W
CH-ENS4-15-460-000000
$1,481.00
20
27
16”H x 14”W x 8”D
16.75”H x 12”W
CH-ENS4-20-460-000000
$1,481.00
25
34
16”H x 14”W x 8”D
16.75”H x 12”W
CH-ENS4-25-460-000000
$1,481.00
30
40
20”H x 16”W x 10”D
21.5”H x 14.5”W
CH-ENS4-30-460-000000
$2,344.00
40
52
20”H x 16”W x 10”D
21.5”H x 14.5”W
CH-ENS4-40-460-000000
$2,344.00
50
65
20”H x 16”W x 10”D
21.5”H x 14.5”W
CH-ENS4-50-460-000000
$2,344.00
77
20”H x 16”W x 10”D
21.5”H x 14.5”W
CH-ENS4-60-460-000000
$4,203.00
60
5
FULL LOAD AMPS @
75
96
20”H x 16”W x 10”D
21.5”H x 14.5”W
CH-ENS4-75-460-000000
$4,203.00
100
124
20”H x 16”W x 10”D
21.5”H x 14.5”W
CH-ENS4-100-460-000000
$4,203.00
125
156
30”H x 24”W x 12”D
31.5”H x 22.5”W
CH-ENS4-125-460-000000
$9,547.00
150
180
30”H x 24”W x 12”D
31.5”H x 22.5”W
CH-ENS4-150-460-000000
$9,547.00
200
240
30”H x 24”W x 12”D
31.5”H x 22.5”W
CH-ENS4-200-460-000000
$9,547.00
250
302
36”H x 30”W x 16”D
37.5”H x 28.5”W
CH-ENS4-250-460-000000
$19,594.00
300
361
36”H x 30”W x 16”D
37.5”H x 28.5”W
CH-ENS4-300-460-000000
$19,594.00
350
414
36”H x 30”W x 16”D
37.5”H x 28.5”W
CH-ENS4-350-460-000000
$19,594.00
400
477
36”H x 30”W x 16”D
37.5”H x 28.5”W
CH-ENS4-400-460-000000
$19,594.00
450
515
36”H x 30”W x 16”D
37.5”H x 28.5”W
CH-ENS4-450-460-000000
Call Cordyne
500
590
48”H x 36”W x 16”D
49.5”H x 34.5”W
CH-ENS4-500-460-000000
Call Cordyne
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
32
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
ENS4 SERIES: STANDARD OPTIONS
Non-Combination, FVNR, NEMA Configuration,
Enclosure Ratings: NEMA 4, 3R, 12, 1
(460V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$38.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$76.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$36.00
2
H-O-A Switch
$34.00
3
ON-OFF Switch
$24.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages.Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
0
1
2
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
None
$0.00
1
120VAC Transformer (0.25 - 10 HP)
$125.00
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 25hp
• 30hp –200hp
• 125hp - 500hp
$68.00
$136.00
$444.00
2
120VAC Transformer (15 - 25 HP)
$147.00
3
120VAC Transformer (30 - 50 HP)
$179.00
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 25hp
• 30hp –200hp
• 250hp - 500hp
$136.00
$271.00
$888.00
4
120VAC Transformer (60 - 100 HP)
$200.00
5
120VAC Transformer (125 - 400 HP)
$238.00
6
120VAC Transformer (450 - 500 HP)
$347.00
Auxiliary contacts are stackable and mount to the side of the contactor
(left or right side).
Examples are 15HP, 460 V Starter in a NEMA 4 enclosure with H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
Control Power Transformers come standard with secondary fuse clip and a
two-pole primary fuse block. Fuses are installed in both the primary and
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
CH BASIC
MODEL
HP
VOLTS
ENS4
15
460
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
33
ENS4 SERIES
Non-Combination, FVNR, NEMA Configuration
Enclosure Ratings: NEMA 4, 3R, 12, 1
1/4 HP - 500 HP (575V)
Standard Features:
• Motor Starters are in stock and ready to go.
• Heavy duty enclosure which is painted steel with ANSI 61 gray powder coating.
• All components are mounted to enclosure back pan.
• Enclosure is rated for NEMA 4, 3R, 13, 12, 1 applications.
• NEMA rated non-reversing magnetic motor starter.
• Heavy duty enclosure for a variety of applications/NEMA ratings.
• Reset pushbutton is standard on all units.
• A wide range of standard options make it possible to adapt a “standard” control
to your particular needs.
• Oversized Control Power Transformer (optional).
• Three leg protection – overload heaters (included standard-sized to rated chart amps).
• All components are UL, CSA rated.
• Units are assembled, pre-wired and ready to go straight out of the box.
NEMA
SIZE
1
HP
3
4
5
6
7
460V/3PHASE/60HZ
OVERALL
OVERALL
DIMENSIONS
DIMENSIONS
MOUNTING
MOUNTING
0.25
0.64
12”H x 12”W x 6”D
12.75”H x 10”W
BASE
PART NUMBER LIST PRICE
LIST PRICE
BASE PART
NUMBER
CH-ENS4-0.25-575-000000
$895.00
0.5
0.9
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ENS4-0.5-575-000000
$895.00
0.75
1.3
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ENS4-0.75-575-000000
$895.00
1
1.7
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ENS4-1-575-000000
$895.00
1.5
2.4
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ENS4-1.5-575-000000
$895.00
2
2.7
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ENS4-2-575-000000
$895.00
3
3.9
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ENS4-3-575-000000
$895.00
5
6.1
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ENS4-5-575-000000
$895.00
9
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ENS4-7.5-575-000000
$956.00
10
11
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ENS4-10-575-000000
$956.00
15
17
16”H x 14”W x 8”D
16.75”H x 12”W
CH-ENS4-15-575-000000
$1,481.00
20
22
16”H x 14”W x 8”D
16.75”H x 12”W
CH-ENS4-20-575-000000
$1,481.00
25
27
16”H x 14”W x 8”D
16.75”H x 12”W
CH-ENS4-25-575-000000
$1,481.00
30
32
20”H x 16”W x 10”D
21.5”H x 14.5”W
CH-ENS4-30-575-000000
$2,344.00
40
41
20”H x 16”W x 10”D
21.5”H x 14.5”W
CH-ENS4-40-575-000000
$2,344.00
50
52
20”H x 16”W x 10”D
21.5”H x 14.5”W
CH-ENS4-50-575-000000
$2,344.00
CH-ENS4-60-575-000000
$4,203.00
7.5
2
FULL LOAD AMPS @
60
62
20”H x 16”W x 10”D
21.5”H x 14.5”W
75
77
20”H x 16”W x 10”D
21.5”H x 14.5”W
CH-ENS4-75-575-000000
$4,203.00
100
99
20”H x 16”W x 10”D
21.5”H x 14.5”W
CH-ENS4-100-575-000000
$4,203.00
125
125
30”H x 24”W x 12”D
31.5”H x 22.5”W
CH-ENS4-125-575-000000
$9,547.00
150
144
30”H x 24”W x 12”D
31.5”H x 22.5”W
CH-ENS4-150-575-000000
$9,547.00
200
192
30”H x 24”W x 12”D
31.5”H x 22.5”W
CH-ENS4-200-575-000000
$9,547.00
250
242
36”H x 30”W x 16”D
37.5”H x 28.5”W
CH-ENS4-250-575-000000
$19,594.00
300
289
36”H x 30”W x 16”D
37.5”H x 28.5”W
CH-ENS4-300-575-000000
$19,594.00
350
336
36”H x 30”W x 16”D
37.5”H x 28.5”W
CH-ENS4-350-575-000000
$19,594.00
400
382
36”H x 30”W x 16”D
37.5”H x 28.5”W
CH-ENS4-400-575-000000
$19,594.00
450
412
36”H x 30”W x 16”D
37.5”H x 28.5”W
CH-ENS4-450-575-000000
Call Cordyne
500
472
48”H x 36”W x 16”D
49.5”H x 34.5”W
CH-ENS4-500-575-000000
Call Cordyne
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
34
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
ENS4 SERIES: STANDARD OPTIONS
Non-Combination, FVNR, NEMA Configuration,
Enclosure Ratings: NEMA 4, 3R, 12, 1
(575V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$38.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$76.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$36.00
2
H-O-A Switch
$34.00
3
ON-OFF Switch
$24.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages.Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
0
1
2
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
None
$0.00
1
120VAC Transformer (0.25 - 10 HP)
$160.00
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 25hp
• 30hp –200hp
• 125hp - 500hp
$68.00
$136.00
$444.00
2
120VAC Transformer (15 - 25 HP)
$193.00
3
120VAC Transformer (30 - 50 HP)
$240.00
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 25hp
• 30hp –200hp
• 250hp - 500hp
$136.00
$271.00
$888.00
4
120VAC Transformer (60 - 100 HP)
$271.00
5
120VAC Transformer (125 - 400 HP)
$327.00
6
120VAC Transformer (450 - 500 HP)
$486.00
Auxiliary contacts are stackable and mount to the side of the contactor
(left or right side).
Examples are 15HP, 575 V Starter in a NEMA 4 enclosure with H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
Control Power Transformers come standard with secondary fuse clip and a
two-pole primary fuse block. Fuses are installed in both the primary and
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
BASIC
MODEL
HP
VOLTS
CH ENS4
15
575
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
35
NEMA Rated Combination Motor Starters (Sizes 0 – 7)
CNS4 SERIES
36
Heavy duty enclosure which is painted steel with ANSI 61 gray powder coating. All components
are mounted to enclosure’s back pan. Enclosure is rated for NEMA 4, 3R, 13, 12, 1 applications.
NEMA Rated Non-Reversing motor starter with three leg protection overload heaters (included
standard-sized to rated chart amps). Reset pushbutton is standard on all units. NEMA, UL, CSA & IEC
rated components only. A wide range of standard options make it possible to adapt a “standard” control
to your particular needs. Oversized Control Power Transformer (optional). Units are assembled, pre-wired
and ready to go straight out of the box. Includes a Molded Case Circuit Breaker with through-the-door handle.
Technical Data and Specifications
STARTER
Contactor and overload combinations designed
to meet NEMA standards and are extremely rugged.
• Meets or exceeds all NEMA, UL and CSA standards.
• Sizes based on standard NEMA classifications.
• Designed and built for a variety of demanding applications.
• Easy coil change and inspectable/replaceable contacts
• Adjustable/interchangeable heater packs for flexibility.
• Heaters available in ambient compensated and non-ambient
compensated.
ENCLOSURE
Applications
• Designed to enclose electrical and/or electronic equipment and
protect against harsh, industrial environments.
Standards
• UL 508 Type 3R, 4, 12 and 13
• CSA Type 3R, 4, 12 and 13
Complies with:
• NEMA Type 3R, 4, 12 and 13
• IEC 529, IP66
Construction
• Body and cover are formed from 16 gauge steel.
• Smooth, continuously welded seams without knockouts, cutouts,
or holes.
• Formed lip on enclosure to exclude flowing liquids and
contaminants.
• 14 gauge welded brackets provide for enclosure mounting.
• Continuously hinged cover has 304 stainless steel hinges and
provides 180º opening.
• Door latches feature the added safety of quarter turn slot requiring
use of tool for opening.
• Quarter turn latches formed from black zinc diecast.
• Oil resistant gaskets are permanently secured.
• Models larger than 4”x4” include a removable 14 gauge
galvanized inner panel.
Finish
• Cover and enclosure are finished in recoatable smooth ANSI/ASA
61 gray powder coating.
• Inner panels are unpainted galvanized steel, (50-200HP) and
above are painted white.
CONTROL POWER TRANSFORMER
Standards
• Control Power Transformers meet or exceeds the
standards established by UL, CSA, IRC, ANSI, NEMA.
Standard
File No.
VA Size
All Units
UL (ANSI/UL 506)
E50394
All Units
CSA (C22-2 No. 66)
LR3902
All Molded Units
IEC 989
All Units
NEMA (ST-1)
Core & Coils
• High quality, high permeability silicon steel laminations.
• All-welded construction.
• Computer designed copper wound coils with optimum turns ratio.
Finger Safe Terminal Covers
• Finger safe terminal covers for both fused and un-fused terminals, in
a clear, see through finish, are available for all molded transformer
series units.
Standard Secondary Fuse Clips
• Each transformer has a single secondary and comes with a factory
installed secondary fuse kit. (fuses are not included.)
• Accommodates 13/32” x 1-1/2” Midget Fuse.
CIRCUIT BREAKERS
Thermal-Magnetic Circuit Breaker with Non-interchangeable
Trip Units
• 15 –600 Amperes.
• 120, 240, 277, 480Y/277, 600Y/347, 690V AC 50/60Hz, 125,
125/250V DC.
• 1, 2 and 3 poles.
Standards and Certifications
Molded case circuit breakers are designed to conform with
the following standards:
• Underwriters Laboratories, Inc., Standard UL489, Molded Case Circuit
Breakers & Circuit Breaker Enclosures.
• National Electrical Manufacturers Association Standard Publication
No. AB1-1993, Molded Case Circuit Breakers.
• Australian Standard AS 2184, Molded Case Circuit Breakers.
• British Standards Institution Standard BS 4752: Part 1,Switchgear &
Control Gear Part 1: Circuit Breakers.
• Canadian Standards Association Standard C22.2 No. 5, Service
Entrance & Branch Circuit Breakers.
• International Electrotechnical Commission Recommendations IEC 157-1,
Circuit Breakers.
• Japanese T-Mark Standard Molded Case Circuit Breakers.
• South African Bureau of Standards, Standard SABS 156, Standard
Specification for Molded Case Circuit Breakers.
• Swiss Electro-Technical Association Standard SEV 157-1, Safety
Regulations for Circuit Breakers.
• Union Technique de l’Electricite Switchgear & Control Gear Circuit
Breaker Requirements.
• Verband Deutscher Elektrotechniker (Association of German Electrical
Engineers) Standard VDE 0660, Low Voltage Switchgear & Control Gear,
CBs. Conformance with these standards satisfies most local and
international codes, assuming user acceptability and simplified application.
Innovation
New innovative design allows higher MCP-Starter combination interrupting
ratings.
Operator
Door mounted, front rotary operating handle allows for external operation
of the interior mounted motor circuit protector. The unit is pad-lockable
and includes a door interlock mechanism. Available in NEMA 1, 3R, 12
and 4/4X ratings to cover a wide array of applications and environments.
Molded case circuit breakers equal or exceed Federal Specification
Classification W-C 475b requirements for the particular class associated
with the circuit breaker frame being considered.
PUSH BUTTONS
Standards: IEC/EN 60947-5-1, VDE 0660,
NFC63140, UL 508, UL 50, CENELEC EN50007
Degree of Protection: IP66 (IEC/EN60529)
UL Ratings: Type 1,2,3,3R,3S,4,4X,5,12,12K e 13
Contacts Resistance: ≤ 25mΩ (IEC/EN 60255)
Electrical Shock Protection: Class II
Temperature Range: -25ºC to 70ºC
Vibration Resistance (IEC/EN 6068-2-6): 16g with frequency
range from 40 to 500HZ and max shifting 0.75mm (peak-to-peak)
FUSES
• Time Delay, Rejection Type Fast Acting; Branch Circuit Fuse
Class CC, Class CC- Rejection Feature
Voltage Rating: 600 Volts AC or Less
Interrupting Rating: 200,000A RMS Sym
Agency Approvals: Std. 248-4, Class CC, UL Listed, Guide JDDZ,
File E4273, CSA Certified, Class 1422-01, File 53787
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
Technical Drawing
CNS4 SERIES
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
37
CNS4 SERIES
Combination, FVNR, NEMA Configuration
Enclosure Ratings: NEMA 4, 3R, 12, 1
1/4 HP - 250 HP (230V)
Standard Features:
• NEMA Rated Non-Reversing magnetic motor starter with a molded case circuit
breaker with through-the-door handle.
• Heavy duty enclosure for a variety of applications/NEMA ratings.
• Reset pushbutton is standard on all units.
• Heavy duty enclosure which is painted steel with ANSI 61 gray powder coating.
• All components are mounted to enclosure back pan.
• Enclosure is rated for NEMA 4, 3R, 13, 12, 1 applications.
• A wide range of standard options make it possible to adapt a “standard” control
to your particular needs.
• Oversized Control Power Transformer (optional).
• Three leg protection-overload heaters
(included standard-sized to rated chart amps).
• All components are UL, CSA rated.
• Units are assembled, pre-wired and ready to go straight out of the box.
OVERALL
MOUNTING
NEMA
SIZE
1
2
3
4
5
6
HP
HP
0.25
FULL LOAD AMPS @
230V/3PHASE/60HZ
FULL LOAD AMPS @
1.4
OVERALL
DIMENSIONS
OVERALL
MOUNTING
DIMENSIONS
16.75”H x 12”W
16”H x 14”W x 8”D
MOUNTING
OVERALL
BASE PART NUMBER
LIST PRICE
BASE PART
NUMBER
LIST PRICE
CH-CNS4-0.25-230-000000
$1,585.00
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CNS4-0.5-230-000000
$1,585.00
3.2
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CNS4-0.75-230-000000
$1,585.00
1
4.2
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CNS4-1-230-000000
$1,585.00
1.5
6.0
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CNS4-1.5-230-000000
$1,585.00
2
6.8
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CNS4-2-230-000000
$1,585.00
3
9.6
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CNS4-3-230-000000
$1,585.00
5
15.2
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CNS4-5-230-000000
$1,646.00
7.5
22
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CNS4-7.5-230-000000
$1,646.00
10
28
20”H x 16”W x 8”D
21.5”H x 14.5”W
CH-CNS4-10-230-000000
$2,488.00
15
42
20”H x 16”W x 8”D
21.5”H x 14.5”W
CH-CNS4-15-230-000000
$2,488.00
20
54
24”H x 16”W x 10”D
25.5”H x 14.5”W
CH-CNS4-20-230-000000
$3,438.00
25
68
24”H x 16”W x 10”D
25.5”H x 14.5”W
CH-CNS4-25-230-000000
$3,438.00
30
80
24”H x 16”W x 10”D
25.5”H x 14.5”W
CH-CNS4-30-230-000000
$3,438.00
40
104
24”H x 20”W x 10”D
25.5”H x 18.5”W
CH-CNS4-40-230-000000
$5,752.00
50
130
24”H x 20”W x 10”D
25.5”H x 18.5”W
CH-CNS4-50-230-000000
$5,752.00
60
154
36”H x 30”W x 12”D
37.5”H x 28.5”W
CH-CNS4-60-230-000000
$11,260.00
0.5
2.2
0.75
75
192
36”H x 30”W x 12”D
37.5”H x 28.5”W
CH-CNS4-75-230-000000
$11,260.00
100
248
36”H x 30”W x 12”D
37.5”H x 28.5”W
CH-CNS4-100-230-000000
$13,055.00
125
312
42”H x 36”W x 16”D
43.5”H x 34.5”W
CH-CNS4-125-230-000000
$23,057.00
150
360
42”H x 36”W x 16”D
43.5”H x 34.5”W
CH-CNS4-150-230-000000
$23,057.00
200
480
42”H x 36”W x 16”D
43.5”H x 34.5”W
CH-CNS4-200-230-000000
$25,158.00
250
602
48”H x 36”W x 16”D
49.5”H x 34.5”W
CH-CNS4-250-230-000000
Call Cordyne
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
38
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
CNS4 SERIES: STANDARD OPTIONS
Combination, FVNR, NEMA Configuration,
Enclosure Ratings: NEMA 4, 3R, 12, 1
(230V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$38.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$76.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$36.00
2
H-O-A Switch
$34.00
3
ON-OFF Switch
$24.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages.Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
0
1
2
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
None
$0.00
1
120VAC Transformer (0.25 - 7.5 HP)
$125.00
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 15hp
• 20hp –100hp
• 125hp - 250hp
$68.00
$136.00
$444.00
2
120VAC Transformer (10 - 15 HP)
$147.00
3
120VAC Transformer (20 - 30 HP)
$179.00
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 15hp
• 20hp –100hp
• 125hp - 250hp
$136.00
$271.00
$888.00
4
120VAC Transformer (40 - 50 HP)
$200.00
5
120VAC Transformer (60 - 200 HP)
$238.00
6
120VAC Transformer (250 HP)
$347.00
Auxiliary contacts are stackable and mount to the side of the contactor
(left or right side).
Examples are 15HP, 230 V Starter in a NEMA 4 enclosure with H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
Control Power Transformers come standard with secondary fuse clip and a
two-pole primary fuse block. Fuses are installed in both the primary and
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
CH BASIC
MODEL
HP
VOLTS
CNS4
15
230
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
39
CNS4 SERIES
Combination, FVNR, NEMA Configuration
Enclosure Ratings: NEMA 4, 3R, 12, 1
1/4 HP - 500 HP (460V)
Standard Features:
• NEMA Rated Non-Reversing magnetic motor starter with a molded case circuit
breaker with through-the-door handle.
• Heavy duty enclosure for a variety of applications/NEMA ratings.
• Reset pushbutton is standard on all units.
• Heavy duty enclosure which is painted steel with ANSI 61 gray powder coating.
• All components are mounted to enclosure back pan.
• Enclosure is rated for NEMA 4, 3R, 13, 12, 1 applications.
• A wide range of standard options make it possible to adapt a “standard” control
to your particular needs.
• Oversized Control Power Transformer (optional).
• Three leg protection-overload heaters
(included standard-sized to rated chart amps).
• All components are UL, CSA rated.
• Units are assembled, pre-wired and ready to go straight out of the box.
OVERALL
MOUNTING
NEMA
SIZE
1
2
3
4
5
6
7
HP
HP
0.25
FULL LOAD AMPS @
460V/3PHASE/60HZ
FULL LOAD AMPS @
0.7
OVERALL
DIMENSIONS
OVERALL
MOUNTING
DIMENSIONS
16.75”H x 12”W
16”H x 14”W x 8”D
MOUNTING
OVERALL
BASE PART NUMBER
LIST PRICE
BASE PART
NUMBER
LIST PRICE$1,585.00
CH-CNS4-0.25-460-000000
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CNS4-0.5-460-000000
$1,585.00
1.6
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CNS4-0.75-460-000000
$1,585.00
2.1
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CNS4-1-460-000000
$1,585.00
CH-CNS4-1.5-460-000000
$1,585.00
0.5
1.1
0.75
1
1.5
3
16”H x 14”W x 8”D
16.75”H x 12”W
2
3.4
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CNS4-2-460-000000
$1,585.00
3
4.8
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CNS4-3-460-000000
$1,585.00
5
7.6
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CNS4-5-460-000000
$1,585.00
7.5
11
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CNS4-7.5-460-000000
$1,646.00
10
14
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CNS4-10-460-000000
$1,646.00
15
21
20”H x 16”W x 8”D
21.5”H x 14.5”W
CH-CNS4-15-460-000000
$2,377.00
20
27
20”H x 16”W x 8”D
21.5”H x 14.5”W
CH-CNS4-20-460-000000
$2,488.00
CH-CNS4-25-460-000000
$2,488.00
25
34
20”H x 16”W x 8”D
21.5”H x 14.5”W
30
40
24”H x 16”W x 10”D
25.5”H x 14.5”W
CH-CNS4-30-460-000000
$3,080.00
40
52
24”H x 16”W x 10”D
25.5”H x 14.5”W
CH-CNS4-40-460-000000
$3,080.00
50
65
24”H x 16”W x 10”D
25.5”H x 14.5”W
CH-CNS4-50-460-000000
$3,438.00
60
77
24”H x 20”W x 10”D
25.5”H x 18.5”W
CH-CNS4-60-460-000000
$5,381.00
75
96
24”H x 20”W x 10”D
25.5”H x 18.5”W
CH-CNS4-75-460-000000
$5,752.00
100
124
24”H x 20”W x 10”D
25.5”H x 18.5”W
CH-CNS4-100-460-000000
$5,752.00
125
156
36”H x 30”W x 12”D
37.5”H x 28.5”W
CH-CNS4-125-460-000000
$11,260.00
150
180
36”H x 30”W x 12”D
37.5”H x 28.5”W
CH-CNS4-150-460-000000
$11,260.00
200
240
36”H x 30”W x 12”D
37.5”H x 28.5”W
CH-CNS4-200-460-000000
$13,055.00
250
302
42”H x 36”W x 16”D
43.5”H x 34.5”W
CH-CNS4-250-460-000000
$23,057.00
300
361
42”H x 36”W x 16”D
43.5”H x 34.5”W
CH-CNS4-300-460-000000
$23,057.00
350
414
42”H x 36”W x 16”D
43.5”H x 34.5”W
CH-CNS4-350-460-000000
$25,158.00
400
477
42”H x 36”W x 16”D
43.5”H x 34.5”W
CH-CNS4-400-460-000000
$25,158.00
450
515
42”H x 36”W x 16”D
43.5”H x 34.5”W
CH-CNS4-450-460-000000
Call Cordyne
500
590
48”H x 36”W x 16”D
49.5”H x 34.5”W
CH-CNS4-500-460-000000
Call Cordyne
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
40
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
CNS4 SERIES: STANDARD OPTIONS
Combination, FVNR, NEMA Configuration,
Enclosure Ratings: NEMA 4, 3R, 12, 1
(460V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$38.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$76.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$36.00
2
H-O-A Switch
$34.00
3
ON-OFF Switch
$24.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages.Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
0
1
2
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
None
$0.00
1
120VAC Transformer (0.25 - 10 HP)
$125.00
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 25hp
• 30hp –200hp
• 250hp - 500hp
$68.00
$136.00
$444.00
2
120VAC Transformer (15 - 25 HP)
$147.00
3
120VAC Transformer (30 - 50 HP)
$179.00
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 25hp
• 30hp –200hp
• 250hp - 500hp
$136.00
$271.00
$888.00
4
120VAC Transformer (60 - 100 HP)
$200.00
5
120VAC Transformer (125 - 400 HP)
$238.00
6
120VAC Transformer (450 - 500 HP)
$347.00
Auxiliary contacts are stackable and mount to the side of the contactor
(left or right side).
Examples are 15HP, 460 V Starter in a NEMA 4 enclosure with H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
Control Power Transformers come standard with secondary fuse clip and a
two-pole primary fuse block. Fuses are installed in both the primary and
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
CH BASIC
MODEL
HP
VOLTS
CNS4
15
460
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
41
CNS4 SERIES
Combination, FVNR, NEMA Configuration
Enclosure Ratings: NEMA 4, 3R, 12, 1
1/4 HP - 500 HP (575V)
Standard Features:
• NEMA Rated Non-Reversing magnetic motor starter with a molded case circuit
breaker with through-the-door handle.
• Heavy duty enclosure for a variety of applications/NEMA ratings.
• Reset pushbutton is standard on all units.
• Heavy duty enclosure which is painted steel with ANSI 61 gray powder coating.
• All components are mounted to enclosure back pan.
• Enclosure is rated for NEMA 4, 3R, 13, 12, 1 applications.
• A wide range of standard options make it possible to adapt a “standard” control
to your particular needs.
• Oversized Control Power Transformer (optional).
• Three leg protection-overload heaters
(included standard-sized to rated chart amps).
• All components are UL, CSA rated.
• Units are assembled, pre-wired and ready to go straight out of the box.
OVERALL
MOUNTING
NEMA
SIZE
HP
HP
0.25
2
3
4
5
6
7
575V/3PHASE/60HZ
OVERALL
DIMENSIONS
OVERALL
BASE PART NUMBER
LIST PRICE
MOUNTING
DIMENSIONS
FULL LOAD AMPS @
NUMBER
LIST PRICE
$1,585.00
CH-CNS4-0.25-575-000000
16.75”H x 12”W BASE PART
16”H x 14”W x 8”D
0.64
MOUNTING
OVERALL
0.9
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CNS4-0.5-575-000000
$1,585.00
0.75
1.3
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CNS4-0.75-575-000000
$1,585.00
1
1.7
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CNS4-1-575-000000
$1,585.00
$1,585.00
0.5
1
FULL LOAD AMPS @
1.5
2.4
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CNS4-1.5-575-000000
2
2.7
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CNS4-2-575-000000
$1,585.00
3
3.9
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CNS4-3-575-000000
$1,585.00
5
6.1
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CNS4-5-575-000000
$1,585.00
7.5
9
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CNS4-7.5-575-000000
$1,646.00
10
11
16”H x 14”W x 8”D
16.75”H x 12”W
CH-CNS4-10-575-000000
$1,646.00
15
17
20”H x 16”W x 8”D
21.5”H x 14.5”W
CH-CNS4-15-575-000000
$2,377.00
20
22
20”H x 16”W x 8”D
21.5”H x 14.5”W
CH-CNS4-20-575-000000
$2,377.00
$2,488.00
25
27
20”H x 16”W x 8”D
21.5”H x 14.5”W
CH-CNS4-25-575-000000
30
32
24”H x 16”W x 10”D
25.5”H x 14.5”W
CH-CNS4-30-575-000000
$3,080.00
40
41
24”H x 16”W x 10”D
25.5”H x 14.5”W
CH-CNS4-40-575-000000
$3,080.00
50
52
24”H x 16”W x 10”D
25.5”H x 14.5”W
CH-CNS4-50-575-000000
$3,080.00
60
62
24”H x 20”W x 10”D
25.5”H x 18.5”W
CH-CNS4-60-575-000000
$5,381.00
75
77
24”H x 20”W x 10”D
25.5”H x 18.5”W
CH-CNS4-75-575-000000
$5,381.00
100
99
24”H x 20”W x 10”D
25.5”H x 18.5”W
CH-CNS4-100-575-000000
$5,752.00
125
125
36”H x 30”W x 12”D
37.5”H x 28.5”W
CH-CNS4-125-575-000000
$11,032.00
150
144
36”H x 30”W x 12”D
37.5”H x 28.5”W
CH-CNS4-150-575-000000
$11,260.00
200
192
36”H x 30”W x 12”D
37.5”H x 28.5”W
CH-CNS4-200-575-000000
$11,260.00
250
242
42”H x 36”W x 16”D
43.5”H x 34.5”W
CH-CNS4-250-575-000000
$23,057.00
300
289
42”H x 36”W x 16”D
43.5”H x 34.5”W
CH-CNS4-300-575-000000
$23,057.00
350
336
42”H x 36”W x 16”D
43.5”H x 34.5”W
CH-CNS4-350-575-000000
$23,057.00
400
382
42”H x 36”W x 16”D
43.5”H x 34.5”W
CH-CNS4-400-575-000000
$25,158.00
450
412
42”H x 36”W x 16”D
43.5”H x 34.5”W
CH-CNS4-450-575-000000
Call Cordyne
500
472
48”H x 36”W x 16”D
49.5”H x 34.5”W
CH-CNS4-500-575-000000
Call Cordyne
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
42
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
CNS4 SERIES: STANDARD OPTIONS
Combination, FVNR, NEMA Configuration,
Enclosure Ratings: NEMA 4, 3R, 12, 1
(575V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$38.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$76.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$36.00
2
H-O-A Switch
$34.00
3
ON-OFF Switch
$24.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages.Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
0
1
2
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
None
$0.00
1
120VAC Transformer (0.25 - 10 HP)
$160.00
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 25hp
• 30hp –200hp
• 250hp - 500hp
$68.00
$136.00
$444.00
2
120VAC Transformer (15 - 25 HP)
$193.00
3
120VAC Transformer (30 - 50 HP)
$240.00
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 25hp
• 30hp –200hp
• 250hp - 500hp
$136.00
$271.00
$888.00
4
120VAC Transformer (60 - 100 HP)
$271.00
5
120VAC Transformer (125 - 400 HP)
$327.00
6
120VAC Transformer (450 - 500 HP)
$486.00
Auxiliary contacts are stackable and mount to the side of the contactor
(left or right side).
Examples are 15HP, 575 V Starter in a NEMA 4 enclosure with H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
Control Power Transformers come standard with secondary fuse clip and a
two-pole primary fuse block. Fuses are installed in both the primary and
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
BASIC
MODEL
HP
VOLTS
CH CNS4
15
575
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
43
ESX-K SERIES
Explosion Proof FVNR Non-Combination Motor Starters – NEMA 7/9 1/4 HP – 500 HP
(Enclosure Manufacturer: Hubbell-Killark)
IEC Contactor with adjustable thermal Overload (Class 10). Oversized Control Power Transformer
(optional). External Machined Flange Joint Design. Units are assembled, pre-wired and ready to go.
Integral Cast Mounting Feet. Units come standard with Hinged Covers. S.S. (316) Captive Quick
Thread Cover Bolts (optional). Ground Lug Package. Steel Mounting Pan. Enclosures Cast From
Copper – Free Aluminum – Max 0.25% Copper Content. Aluminum, Stainless Steel Shot or Sandblasted
Natural Finish. Enclosures Suitable for NEMA 4X. Cast Aluminum and Stainless Steel Hinge.
Technical Data and Specifications
ENCLOSURE
Applications
• Designed to enclose electrical and/or electronic equipment and
protect against harsh, industrial environments.
Standards
• UL 508 Type 3R, 4, 12 and 13
• CSA Type 3R, 4, 12 and 13
Complies with:
• NEMA Type 3R, 4, 12 and 13
• IEC 529, IP66
Construction
• Body and cover are formed from 16 gauge steel.
• Smooth, continuously welded seams without knockouts, cutouts,
or holes.
• Formed lip on enclosure to exclude flowing liquids and
contaminants.
• 14 gauge welded brackets provide for enclosure mounting.
• Continuously hinged cover has 304 stainless steel hinges and
provides 180º opening.
• Door latches feature the added safety of quarter turn slot requiring
use of tool for opening.
• Quarter turn latches formed from black zinc diecast.
• Oil resistant gaskets are permanently secured.
• Models larger than 4”x4” include a removable 14 gauge
galvanized inner panel.
Finish
• Cover and enclosure are finished in recoatable smooth ANSI/ASA
61 gray powder coating.
• Inner panels are unpainted galvanized steel, (50-200HP) and
above are painted white.
CONTACTOR
Standards
• Compact frame sizes from 7A to 250A
• Common accessories for all contactor sizes
• Panel or 35mm DIN rail mountable
• Simple to exchange coils
• Finger-touch protection
• Front and side mountable auxiliary contact blocks
• Replaceable main contacts for entire line
• Positively driven contacts and operations
• Front and side mounted auxiliary contacts
• Wide coil voltage selection
• Designed to perform over 1 million electrical and 10 million
mechanical operations
Certifications:
• cULus
• IEC 60947
• CE
• Test/Reset button
• Selectable Manual or Automatic Reset
• Separate mounting capability via screws or DIN rail
CONTROL POWER TRANSFORMER
Standards
• Control Power Transformers meet or exceeds the
standards established by UL, CSA, IRC, ANSI, NEMA.
Standard
UL (ANSI/UL 506)
CSA (C22-2 No. 66)
IEC 989
NEMA (ST-1)
File No.
E50394
LR3902
VA Size
All Units
All Units
All Molded Units
All Units
Core & Coils
• High quality, high permeability silicon steel laminations.
• All-welded construction.
• Computer designed copper wound coils with optimum turns ratio.
Finger Safe Terminal Covers
• Finger safe terminal covers for both fused and un-fused terminals, in
a clear, see through finish, are available for all molded transformer
series units.
Standard Secondary Fuse Clips
• Each transformer has a single secondary and comes with a factory
installed secondary fuse kit. (fuses are not included.)
• Accommodates 13/32” x 1-1/2” Midget Fuse.
PUSH BUTTONS
Standards: IEC/EN 60947-5-1, VDE 0660,
NFC63140, UL 508, UL 50, CENELEC EN50007
Degree of Protection: IP66 (IEC/EN60529)
UL Ratings: Type 1,2,3,3R,3S,4,4X,5,12,12K e 13
Contacts Resistance: ≤ 25mΩ (IEC/EN 60255)
Electrical Shock Protection: Class II
Temperature Range: -25ºC to 70ºC
Vibration Resistance (IEC/EN 6068-2-6): 16g with frequency
range from 40 to 500HZ and max shifting 0.75mm (peak-to-peak)
FUSES
• Time Delay, Rejection Type Fast Acting; Branch Circuit Fuse
Class CC, Class CC- Rejection Feature
Voltage Rating: 600 Volts AC or Less
Interrupting Rating: 200,000A RMS Sym
Agency Approvals: Std. 248-4, Class CC, UL Listed, Guide JDDZ,
File E4273, CSA Certified, Class 1422-01, File 53787
OVERLOAD
Standards
• Phase failure/unbalance sensitivity
• Ambient temperature compensation
• Isolated N.C. “Trip” and N.O. “Alarm” auxiliary contacts
• Class 10 tripping characteristics
• “Trip Free” design
• Field adjustable trip current setting
44
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
Technical Drawing
ESX-K SERIES
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
45
ESX-K SERIES
Non-Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 7/9 Mfg: Killark
1/4 HP - 250 HP (230V)
Standard Features:
• IEC Contactor with adjustable thermal overload (Class 10).
• Oversized control power transformer (optional).
• External machined flange joint design.
• Integral cast mounting feet.
• Units come standard with hinged covers.
• S.S. (316) captive quick thread cover bolts (optional).
• Ground lug package.
• Steel mounting pan enclosures.
• All enclosures suitable for drilling and tapping.
• Cast from copper – free aluminum – Max 0.25% copper content.
• Stainless steel shot or sandblasted natural finish.
• All enclosures suitable for NEMA 4X (optional).
• Cast aluminum and stainless steel hinge (optional).
• Units are assembled, pre-wired and ready to go straight out of the box.
HP
FULL LOAD AMPS @
230V/3PHASE/60HZ
OVERALL
DIMENSIONS
Compliances:
N.E.C. CL. I, Div. 1&2 Groups B, C & D
CL, II, Div. 1&2 Groups E, F. & G
CL. III, Enclosures 4X
NEMA 3, 4X, 7 & 9
Approvals:
U.L. Listed – Standard 1203
CSA Certified – Standard C22.2 No. 30-M1916
CL. I, Div. 1&2 Groups B, C & D
CL. II, Div. 1&2 Groups E, F & G
CL. III, Enclosure 4X
NEMA 3, 4X, 7 & 9
OVERALL
MOUNTING
BASE PART NUMBER
LIST PRICE
0.25*
1.4
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-0.25-230-000000
$3,329.00
0.5*
2.2
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-0.5-230-000000
$3,329.00
0.75*
3.2
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-0.75-230-000000
$3,329.00
1*
4.2
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-1-230-000000
$3,329.00
1.5*
6.0
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-1.5-230-000000
$3,329.00
2*
6.8
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-2-230-000000
$3,329.00
3*
9.6
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-3-230-000000
$3,329.00
5*
15.2
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-5-230-000000
$3,394.00
7.5*
22
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-7.5-230-000000
$3,430.00
10*
28
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-10-230-000000
$3,500.00
15*
42
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-15-230-000000
$3,589.00
20
54
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-20-230-000000
$3,621.00
25
68
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-25-230-000000
$3,641.00
30
80
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-30-230-000000
$3,818.00
40
104
26.25”H x 12.5”W x 10.75”D
24.625”H x 5”W
CH-ESX-K-40-230-000000
$5,948.00
50
130
26.25”H x 12.5”W x 10.75”D
24.625”H x 5”W
CH-ESX-K-50-230-000000
$6,084.00
60
154
34.25”H x 16.5”W x 11.5”D
32.625”H x 9”W
CH-ESX-K-60-230-000000
$6,697.00
75
192
34.25”H x 16.5”W x 11.5”D
32.625”H x 9”W
CH-ESX-K-75-230-000000
$8,529.00
100
248
34.25”H x 16.5”W x 11.5”D
32.625”H x 9”W
CH-ESX-K-100-230-000000
$9,326.00
125
312
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ESX-K-125-230-000000
$26,925.00
150
360
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ESX-K-150-230-000000
$27,576.00
200
480
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ESX-K-200-230-000000
$30,957.00
250
602
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ESX-K-250-230-000000
$34,391.00
* If CPT option is NOT chosen for 0.25 to 15 HP, enclosure overall size will be 18”H X 11”W X 9.125”D (mounting dimensions 16.375”H X 3.625”W) and a
$150 deduction can be taken from the corresponding list price.
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
46
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
ESX-K SERIES: STANDARD OPTIONS
Non-Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 7/9 Mfg: Killark
(230V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
0
None
1
“Run” (Red) Indicator Light – Front Panel
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
OPTION
CODES
PRICE
ADDER
$0.00
0
None
$0.00
$187.00
2
Adds 2 Terminal Blocks
$6.00
$374.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 3/4” NPSM with an Epoxy Coated Guard. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$392.00
2
H-O-A Switch
$307.00
3
ON-OFF Switch
$307.00
OPTION
CODES
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages.Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 3/4” NPSM with a polished aluminum ring.
H-O-A (Hands-Off-Auto) Switches are 3/4” NPT and are three position
maintained. ON-OFF Switches are two position, 3/4” NPT, level style with
polished aluminum bezel.
OPTION F
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 15 HP)
$125.00
0
None
$0.00
$36.00
2
120VAC Transformer (20 - 30 HP)
$147.00
1
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 60hp
• 75hp - 250hp
$63.00
3
120VAC Transformer (40 - 50 HP)
$179.00
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 10hp
• 15hp - 250hp
$62.00
4
120VAC Transformer (60 - 100 HP)
$200.00
$125.00
5
120VAC Transformer (125 - 250 HP)
$238.00
2
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
two-pole primary fuse block. Fuses are installed in both the primary and
Examples are 15HP, 230V Starter in a NEMA 4 enclosure with H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
CH BASIC
MODEL
ESX-K
HP
15
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
VOLTS
230
OPTION CODES
A B C D E F
0 2 0 2 1 1
47
ESX-K SERIES
Non-Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 7/9 Mfg: Killark
1/4 HP - 300 HP (380V)
Standard Features:
• IEC Contactor with adjustable thermal overload (Class 10).
• Oversized control power transformer (optional).
• External machined flange joint design.
• Integral cast mounting feet.
• Units come standard with hinged covers.
• S.S. (316) captive quick thread cover bolts (optional).
• Ground lug package.
• Steel mounting pan enclosures.
• All enclosures suitable for drilling and tapping.
• Cast from copper – free aluminum – Max 0.25% copper content.
• Stainless steel shot or sandblasted natural finish.
• All enclosures suitable for NEMA 4X (optional).
• Cast aluminum and stainless steel hinge (optional).
• Units are assembled, pre-wired and ready to go straight out of the box.
HP
FULL LOAD AMPS @
380V/3PHASE/60HZ
OVERALL
DIMENSIONS
Compliances:
N.E.C. CL. I, Div. 1&2 Groups B, C & D
CL, II, Div. 1&2 Groups E, F. & G
CL. III, Enclosures 4X
NEMA 3, 4X, 7 & 9
Approvals:
U.L. Listed – Standard 1203
CSA Certified – Standard C22.2 No. 30-M1916
CL. I, Div. 1&2 Groups B, C & D
CL. II, Div. 1&2 Groups E, F & G
CL. III, Enclosure 4X
NEMA 3, 4X, 7 & 9
OVERALL
MOUNTING
BASE PART NUMBER
LIST PRICE
0.25*
0.75
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-0.25-380-000000
$3,342.00
0.5*
1.3
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-0.5-380-000000
$3,342.00
0.75*
1.8
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-0.75-380-000000
$3,342.00
1*
2.3
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-1-380-000000
$3,342.00
1.5*
3.3
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-1.5-380-000000
$3,342.00
2*
4.3
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-2-380-000000
$3,342.00
3*
6.1
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-3-380-000000
$3,342.00
5*
9.7
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-5-380-000000
$3,355.00
7.5*
14
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-7.5-380-000000
$3,393.00
10*
18
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-10-380-000000
$3,453.00
15*
27
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-15-380-000000
$3,524.00
20*
34
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-20-380-000000
$3,585.00
25*
43
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-25-380-000000
$3,632.00
30
51
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-30-380-000000
$3,653.00
40
66
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-40-380-000000
$4,219.00
50
83
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-50-380-000000
$4,332.00
60
103
26.25”H x 12.5”W x 10.75”D
24.625”H x 5”W
CH-ESX-K-60-380-000000
$6,484.00
75
128
26.25”H x 12.5”W x 10.75”D
24.625”H x 5”W
CH-ESX-K-75-380-000000
$6,896.00
100
165
26.25”H x 12.5”W x 10.75”D
24.625”H x 5”W
CH-ESX-K-100-380-000000
$7,338.00
125
208
34.25”H x 16.5”W x 11.5”D
32.625”H x 9”W
CH-ESX-K-125-380-000000
$7,709.00
150
240
34.25”H x 16.5”W x 11.5”D
32.625”H x 9”W
CH-ESX-K-150-380-000000
$9,639.00
200
320
34.25”H x 16.5”W x 11.5”D
32.625”H x 9”W
CH-ESX-K-200-380-000000
$9,980.00
250
403
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ESX-K-250-380-000000
$28,120.00
482
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ESX-K-300-380-000000
$31,690.00
300
* If CPT option is NOT chosen for 0.25 to 15 HP, enclosure overall size will be 18”H X 11”W X 9.125”D (mounting dimensions 16.375”H X 3.625”W) and a
$150 deduction can be taken from the corresponding list price.
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
48
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
ESX-K SERIES: STANDARD OPTIONS
Non-Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 7/9 Mfg: Killark
(380V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$187.00
2
Adds 2 Terminal Blocks
$6.00
“Run” (Red) & “Stop” (Green)
Indicator Lights
$374.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
2
Indicator Lights are 3/4” NPSM with an Epoxy Coated Guard. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$392.00
2
H-O-A Switch
$307.00
3
ON-OFF Switch
$307.00
OPTION
CODES
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages.Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 3/4” NPSM with a polished aluminum ring.
H-O-A (Hands-Off-Auto) Switches are 3/4” NPT and are three position
maintained. ON-OFF Switches are two position, 3/4” NPT, level style with
polished aluminum bezel.
OPTION F
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 15 HP)
$152.00
0
None
$0.00
$36.00
2
120VAC Transformer (20 - 30 HP)
$182.00
1
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 75hp
• 100hp - 300hp
$63.00
3
120VAC Transformer (40 - 50 HP)
$226.00
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 15hp
• 20hp - 300hp
$59.00
4
120VAC Transformer (60 - 100 HP)
$254.00
$125.00
5
120VAC Transformer (125 - 250 HP)
$306.00
2
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
two-pole primary fuse block. Fuses are installed in both the primary and
Examples are 15HP, 380V Starter in a NEMA 4 enclosure with H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
CH BASIC
MODEL
ESX-K
HP
15
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
VOLTS
380
OPTION CODES
A B C D E F
0 2 0 2 1 1
49
ESX-K SERIES
Non-Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 7/9 Mfg: Killark
1/4 HP - 500 HP (460V)
Standard Features:
• IEC Contactor with adjustable thermal overload (Class 10).
• Oversized control power transformer (optional).
• External machined flange joint design.
• Integral cast mounting feet.
• Units come standard with hinged covers.
• S.S. (316) captive quick thread cover bolts (optional).
• Ground lug package.
• Steel mounting pan enclosures.
• All enclosures suitable for drilling and tapping.
• Cast from copper – free aluminum – Max 0.25% copper content.
• Stainless steel shot or sandblasted natural finish.
• All enclosures suitable for NEMA 4X (optional).
• Cast aluminum and stainless steel hinge (optional).
• Units are assembled, pre-wired and ready to go straight out of the box.
HP
FULL LOAD AMPS @
460V/3PHASE/60HZ
OVERALL
DIMENSIONS
Compliances:
N.E.C. CL. I, Div. 1&2 Groups B, C & D
CL, II, Div. 1&2 Groups E, F. & G
CL. III, Enclosures 4X
NEMA 3, 4X, 7 & 9
Approvals:
U.L. Listed – Standard 1203
CSA Certified – Standard C22.2 No. 30-M1916
CL. I, Div. 1&2 Groups B, C & D
CL. II, Div. 1&2 Groups E, F & G
CL. III, Enclosure 4X
NEMA 3, 4X, 7 & 9
OVERALL
MOUNTING
BASE PART NUMBER
LIST PRICE
0.25*
0.7
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-0.25-460-000000
$3,342.00
0.5*
1.1
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-0.5-460-000000
$3,342.00
0.75*
1.6
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-0.75-460-000000
$3,342.00
CH-ESX-K-1-460-000000
$3,342.00
1*
2.1
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
1.5*
3
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-1.5-460-000000
$3,342.00
2*
3.4
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-2-460-000000
$3,342.00
3*
4.8
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-3-460-000000
$3,342.00
5*
7.6
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-5-460-000000
$3,355.00
7.5*
11
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-7.5-460-000000
$3,382.00
10*
14
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-10-460-000000
$3,393.00
15*
21
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-15-460-000000
$3,453.00
20*
27
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-20-460-000000
$3,524.00
25*
34
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-25-460-000000
$3,585.00
30
40
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-30-460-000000
$3,603.00
40
52
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-40-460-000000
$3,632.00
50
65
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-50-460-000000
$3,653.00
60
77
26.25”H x 12.5”W x 10.75”D
24.625”H x 5”W
CH-ESX-K-60-460-000000
$5,801.00
75
96
26.25”H x 12.5”W x 10.75”D
24.625”H x 5”W
CH-ESX-K-75-460-000000
$6,003.00
100
124
26.25”H x 12.5”W x 10.75”D
24.625”H x 5”W
CH-ESX-K-100-460-000000
$6,117.00
125
156
34.25”H x 16.5”W x 11.5”D
32.625”H x 9”W
CH-ESX-K-125-460-000000
$6,730.00
150
180
34.25”H x 16.5”W x 11.5”D
32.625”H x 9”W
CH-ESX-K-150-460-000000
$7,709.00
200
240
34.25”H x 16.5”W x 11.5”D
32.625”H x 9”W
CH-ESX-K-200-460-000000
$9,639.00
250
302
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ESX-K-250-460-000000
$26,925.00
300
361
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ESX-K-300-460-000000
$28,004.00
350
414
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ESX-K-350-460-000000
$31,690.00
400
477
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ESX-K-400-460-000000
$31,690.00
450
515
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ESX-K-450-460-000000
$35,470.00
590
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ESX-K-500-460-000000
$35,470.00
500
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
50
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2012
2013 CORDYNE, INC.
All Rights Reserved.
ESX-K SERIES: STANDARD OPTIONS
Non-Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 7/9 Mfg: Killark
(460V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$187.00
2
Adds 2 Terminal Blocks
$6.00
“Run” (Red) & “Stop” (Green)
Indicator Lights
$374.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
2
Indicator Lights are 3/4” NPSM with an Epoxy Coated Guard. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$392.00
2
H-O-A Switch
$307.00
3
ON-OFF Switch
$307.00
OPTION
CODES
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages.Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 3/4” NPSM with a polished aluminum ring.
H-O-A (Hands-Off-Auto) Switches are 3/4” NPT and are three position
maintained. ON-OFF Switches are two position, 3/4” NPT, level style with
polished aluminum bezel.
OPTION F
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 25 HP)
$125.00
0
None
$0.00
$36.00
2
120VAC Transformer (30 - 50 HP)
$147.00
1
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 125hp
• 150hp - 500hp
$63.00
3
120VAC Transformer (60 - 100 HP)
$179.00
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 20hp
• 25hp - 500hp
$59.00
4
120VAC Transformer (125 - 200 HP)
$200.00
$125.00
5
120VAC Transformer (250 - 500 HP)
$238.00
2
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
two-pole primary fuse block. Fuses are installed in both the primary and
Examples are 15HP, 460V Starter in a NEMA 4 enclosure with H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
CH BASIC
MODEL
ESX-K
HP
15
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
VOLTS
460
OPTION CODES
A B C D E F
0 2 0 2 1 1
51
ESX-K SERIES
Non-Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 7/9 Mfg: Killark
1/4 HP - 500 HP (575V)
Standard Features:
• IEC Contactor with adjustable thermal overload (Class 10).
• Oversized control power transformer (optional).
• External machined flange joint design.
• Integral cast mounting feet.
• Units come standard with hinged covers.
• S.S. (316) captive quick thread cover bolts (optional).
• Ground lug package.
• Steel mounting pan enclosures.
• All enclosures suitable for drilling and tapping.
• Cast from copper – free aluminum – Max 0.25% copper content.
• Stainless steel shot or sandblasted natural finish.
• All enclosures suitable for NEMA 4X (optional).
• Cast aluminum and stainless steel hinge (optional).
• Units are assembled, pre-wired and ready to go straight out of the box.
FULL LOAD AMPS @
HP
575V/3PHASE/60HZ
OVERALL
DIMENSIONS
Compliances:
N.E.C. CL. I, Div. 1&2 Groups B, C & D
CL, II, Div. 1&2 Groups E, F. & G
CL. III, Enclosures 4X
NEMA 3, 4X, 7 & 9
Approvals:
U.L. Listed – Standard 1203
CSA Certified – Standard C22.2 No. 30-M1916
CL. I, Div. 1&2 Groups B, C & D
CL. II, Div. 1&2 Groups E, F & G
CL. III, Enclosure 4X
NEMA 3, 4X, 7 & 9
OVERALL
MOUNTING
BASE PART NUMBER
LIST PRICE
0.64
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-0.25-575-000000
$3,342.00
0.5*
0.9
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-0.5-575-000000
$3,342.00
0.75*
1.3
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-0.75-575-000000
$3,342.00
1*
1.7
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-1-575-000000
$3,342.00
1.5*
2.4
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-1.5-575-000000
$3,342.00
2*
2.7
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-2-575-000000
$3,342.00
3*
3.9
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-3-575-000000
$3,342.00
5*
6.1
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-5-575-000000
$3,342.00
7.5*
9
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-7.5-575-000000
$3,355.00
10*
11
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-10-575-000000
$3,382.00
15*
17
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-15-575-000000
$3,412.00
20*
22
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-20-575-000000
$3,453.00
25*
27
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-25-575-000000
$3,524.00
30
32
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-30-575-000000
$3,585.00
40
41
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-40-575-000000
$3,603.00
50
52
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-50-575-000000
$3,632.00
60
62
26.25”H x 12.5”W x 10.75”D
24.625”H x 5”W
CH-ESX-K-60-575-000000
$5,591.00
75
77
26.25”H x 12.5”W x 10.75”D
24.625”H x 5”W
CH-ESX-K-75-575-000000
$5,801.00
100
99
26.25”H x 12.5”W x 10.75”D
24.625”H x 5”W
CH-ESX-K-100-575-000000
$6,003.00
125
1
125
34.25”H x 16.5”W x 11.5”D
32.625”H x 9”W
CH-ESX-K-125-575-000010
$6,285.00
150
1
144
34.25”H x 16.5”W x 11.5”D
32.625”H x 9”W
CH-ESX-K-150-575-000010
$6,697.00
200
1
192
34.25”H x 16.5”W x 11.5”D
32.625”H x 9”W
CH-ESX-K-200-575-000010
$8,529.00
250
1
242
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ESX-K-250-575-000010
$26,271.00
300
1
289
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ESX-K-300-575-000010
$26,925.00
350
1
336
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ESX-K-350-575-000010
$27,576.00
400
1
382
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ESX-K-400-575-000010
$27,576.00
450
1
412
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ESX-K-450-575-000010
$30,957.00
500
1
472
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ESX-K-500-575-000010
$30,957.00
0.25*
1 For Starters 575V, 125 HP - 500 HP, Option E must be selected.
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
52
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2012
2013 CORDYNE, INC.
All Rights Reserved.
ESX-K SERIES: STANDARD OPTIONS
Non-Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 7/9 Mfg: Killark
(575V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$187.00
2
Adds 2 Terminal Blocks
$6.00
“Run” (Red) & “Stop” (Green)
Indicator Lights
$374.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
2
Indicator Lights are 3/4” NPSM with an Epoxy Coated Guard. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$392.00
2
H-O-A Switch
$307.00
3
ON-OFF Switch
$307.00
Start-Stop Pushbuttons are 3/4” NPSM with a polished aluminum ring.
H-O-A (Hands-Off-Auto) Switches are 3/4” NPT and are three position
maintained. ON-OFF Switches are two position, 3/4” NPT, level style with
polished aluminum bezel.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
PRICE
ADDER
115VAC Contactor Coil for Remote Operation
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages.Contactor coils can be easily changed in
the field.
OPTION F
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION
CODES
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 25 HP)
$160.00
0
None
$0.00
$36.00
2
120VAC Transformer (30 - 50 HP)
$193.00
1
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 150hp
• 200hp - 500hp
$63.00
3
120VAC Transformer (60 - 100 HP)
$240.00
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 25hp
• 30hp - 500hp
$59.00
4
120VAC Transformer (125 - 200 HP)
$271.00
$125.00
5
120VAC Transformer (250 - 500 HP)
$327.00
2
Auxiliary contacts are stackable and mount to the side of the contactor
(left or right side).
Control Power Transformers come standard with secondary fuse clip and a
two-pole primary fuse block. Fuses are installed in both the primary and
Examples are 15HP, 575V Starter in a NEMA 4 enclosue with H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
BASIC
MODEL
HP
VOLTS
CH ESX-K
15
575
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
53
CSX-K SERIES
Explosion Proof FVNR Combination Motor Starters – NEMA 7/9, 1/4 HP – 500 HP
(Enclosure Manufacturer: Hubbell-Killark)
54
IEC Contactor with adjustable thermal Overload (Class 10). Oversized Control Power Transformer
(optional). External Machined Flange Joint Design. Units are assembled, pre-wired and ready to go.
Integral Cast Mounting Feet. Units come standard with Hinged Covers. S.S. (316) Captive Quick
Thread Cover Bolts (optional). Ground Lug Package. Steel Mounting Pan. Enclosures Cast From
Copper – Free Aluminum – Max 0.25% Copper Content. Aluminum, Stainless Steel Shot or Sandblasted
Natural Finish. Enclosures Suitable for NEMA 4X. Cast Aluminum and Stainless Steel Hinge. Includes
a Molded Case Circuit Breaker with through-the-door handle.
Technical Data and Specifications
Core & Coils
• High quality, high permeability silicon steel laminations.
• All-welded construction.
• Computer designed copper wound coils with optimum turns ratio.
Finger Safe Terminal Covers
• Finger safe terminal covers for both fused and un-fused terminals, in
a clear, see through finish, are available for all molded transformer
series units.
Standard Secondary Fuse Clips
• Each transformer has a single secondary and comes with a factory
installed secondary fuse kit. (fuses are not included.)
• Accommodates 13/32” x 1-1/2” Midget Fuse.
CIRCUIT BREAKERS
Thermal-Magnetic Circuit Breaker with Non-interchangeable
Trip Units
• 15 –600 Amperes.
• 120, 240, 277, 480Y/277, 600Y/347, 690V AC 50/60Hz, 125,
125/250V DC.
• 1, 2 and 3 poles.
Standards and Certifications
Molded case circuit breakers are designed to conform with
the following standards:
• Underwriters Laboratories, Inc., Standard UL489, Molded Case Circuit Breakers &
Circuit Breaker Enclosures.
• National Electrical Manufacturers Association Standard Publication
No. AB1-1993, Molded Case Circuit Breakers.
• Australian Standard AS 2184, Molded Case Circuit Breakers.
• British Standards Institution Standard BS 4752: Part 1,Switchgear & Control Gear
Part 1: Circuit Breakers.
• Canadian Standards Association Standard C22.2 No. 5, Service Entrance & Branch
Circuit Breakers.
• International Electrotechnical Commission Recommendations IEC 157-1, Circuit
Breakers.
• Japanese T-Mark Standard Molded Case Circuit Breakers.
• South African Bureau of Standards, Standard SABS 156, Standard Specification for
Molded Case Circuit Breakers.
• Swiss Electro-Technical Association Standard SEV 157-1, Safety
Regulations for Circuit Breakers.
• Union Technique de l’Electricite Switchgear & Control Gear Circuit Breaker
Requirements.
• Verband Deutscher Elektrotechniker (Association of German Electrical Engineers)
Standard VDE 0660, Low Voltage Switchgear & Control Gear, CBs.
Conformance with these standards satisfies most local and international codes,
assuming user acceptability and simplified application.
Innovation
New innovative design allows higher MCP-Starter combination interrupting ratings.
Operator
Door mounted, front rotary operating handle allows for external operation of the interior
mounted motor circuit protector. The unit is pad-lockable and includes a door interlock
mechanism. Available in NEMA 1, 3R, 12 and 4/4X ratings to cover a wide array of
applications and environments.
Molded case circuit breakers equal or exceed Federal Specification Classification
W-C 475b requirements for the particular class associated with the circuit breaker
frame being considered.
PUSH BUTTONS
Standards: IEC/EN 60947-5-1, VDE 0660,
NFC63140, UL 508, UL 50, CENELEC EN50007
Degree of Protection: IP66 (IEC/EN60529)
UL Ratings: Type 1,2,3,3R,3S,4,4X,5,12,12K e 13
Contacts Resistance: ≤ 25mΩ (IEC/EN 60255)
Electrical Shock Protection: Class II
Temperature Range: -25ºC to 70ºC
Vibration Resistance (IEC/EN 6068-2-6): 16g with frequency
range from 40 to 500HZ and max shifting 0.75mm (peak-to-peak)
FUSES
• Time Delay, Rejection Type Fast Acting; Branch Circuit Fuse
Class CC, Class CC- Rejection Feature
Voltage Rating: 600 Volts AC or Less
Interrupting Rating: 200,000A RMS Sym
Agency Approvals: Std. 248-4, Class CC, UL Listed, Guide JDDZ,
File E4273, CSA Certified, Class 1422-01, File 53787
ENCLOSURE
Applications
• Designed to enclose electrical and/or electronic equipment and
protect against harsh, industrial environments.
Standards
• UL 508 Type 3R, 4, 12 and 13
• CSA Type 3R, 4, 12 and 13
Complies with:
• NEMA Type 3R, 4, 12 and 13
• IEC 529, IP66
Construction
• Body and cover are formed from 16 gauge steel.
• Smooth, continuously welded seams without knockouts, cutouts,
or holes.
• Formed lip on enclosure to exclude flowing liquids and
contaminants.
• 14 gauge welded brackets provide for enclosure mounting.
• Continuously hinged cover has 304 stainless steel hinges and
provides 180º opening.
• Door latches feature the added safety of quarter turn slot requiring
use of tool for opening.
• Quarter turn latches formed from black zinc diecast.
• Oil resistant gaskets are permanently secured.
• Models larger than 4”x4” include a removable 14 gauge
galvanized inner panel.
Finish
• Cover and enclosure are finished in recoatable smooth ANSI/ASA
61 gray powder coating.
• Inner panels are unpainted galvanized steel, (50-200HP) and
above are painted white.
CONTACTOR
Standards
• Compact frame sizes from 7A to 250A
• Common accessories for all contactor sizes
• Panel or 35mm DIN rail mountable
• Simple to exchange coils
• Finger-touch protection
• Front and side mountable auxiliary contact blocks
• Replaceable main contacts for entire line
• Positively driven contacts and operations
• Front and side mounted auxiliary contacts
• Wide coil voltage selection
• Designed to perform over 1 million electrical and 10 million
mechanical operations
Certifications:
• cULus
• IEC 60947
• CE
OVERLOAD
Standards
• Phase failure/unbalance sensitivity
• Ambient temperature compensation
• Isolated N.C. “Trip” and N.O. “Alarm” auxiliary contacts
• Class 10 tripping characteristics
• “Trip Free” design
• Field adjustable trip current setting
• Test/Reset button
• Selectable Manual or Automatic Reset
• Separate mounting capability via screws or DIN rail
CONTROL POWER TRANSFORMER
Standards
• Control Power Transformers meet or exceeds the
standards established by UL, CSA, IRC, ANSI, NEMA.
Standard
File No.
VA Size
All Units
UL (ANSI/UL 506)
E50394
All Units
CSA (C22-2 No. 66)
LR3902
All Molded Units
IEC 989
All Units
NEMA (ST-1)
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
Technical Drawing
CSX-K SERIES
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
55
CSX-K SERIES
Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 7/9 Mfg: Killark
1/4 HP - 250 HP (230V)
Standard Features:
• IEC Contactor with adjustable thermal overload (Class 10).
• Oversized control power transformer (optional).
• External machined flange joint design.
• Integral cast mounting feet.
• Units come standard with hinged covers.
• S.S. (316) captive quick thread cover bolts (optional).
• Ground lug package.
• Steel mounting pan enclosures.
• All enclosures suitable for drilling and tapping.
• Cast from copper – free aluminum – Max 0.25% copper content.
• Stainless steel shot or sandblasted natural finish.
• All enclosures suitable for NEMA 4X (optional).
• Cast aluminum and stainless steel hinge (optional).
• Units are assembled, pre-wired and ready to go straight out of the box.
HP
FULL LOAD AMPS @
230V/3PHASE/60HZ
OVERALL
DIMENSIONS
Compliances:
N.E.C. CL. I, Div. 1&2 Groups B, C & D
CL, II, Div. 1&2 Groups E, F. & G
CL. III, Enclosures 4X
NEMA 3, 4X, 7 & 9
Approvals:
U.L. Listed – Standard 1203
CSA Certified – Standard C22.2 No. 30-M1916
CL. I, Div. 1&2 Groups B, C & D
CL. II, Div. 1&2 Groups E, F & G
CL. III, Enclosure 4X
NEMA 3, 4X, 7 & 9
OVERALL
MOUNTING
BASE PART NUMBER
LIST PRICE
0.25
1.4
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-0.25-230-000000
$3,750.00
0.5
2.2
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-0.5-230-000000
$3,750.00
$3,750.00
0.75
3.2
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-0.75-230-000000
1
4.2
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-1-230-000000
$3,750.00
1.5
6.0
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-1.5-230-000000
$3,750.00
2
6.8
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-2-230-000000
$3,750.00
3
9.6
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-3-230-000000
$3,762.00
5
15.2
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-5-230-000000
$3,815.00
7.5
22
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-7.5-230-000000
$3,851.00
10
28
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-10-230-000000
$4,032.00
CH-CSX-K-15-230-000000
$4,122.00
15
42
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
20
54
25.5”H x 14.5”W x 9.125”D
23.875”H x 7”W
CH-CSX-K-20-230-000000
$5,266.00
25
68
25.5”H x 14.5”W x 9.125”D
23.875”H x 7”W
CH-CSX-K-25-230-000000
$5,286.00
30
80
25.5”H x 14.5”W x 9.125”D
23.875”H x 7”W
CH-CSX-K-30-230-000000
$5,463.00
40
104
27.25”H x 17.875”W x 11”D
25.625”H x 10.375”W
CH-CSX-K-40-230-000000
$9,819.00
50
130
27.25”H x 17.875”W x 11”D
25.625”H x 10.375”W
CH-CSX-K-50-230-000000
$9,955.00
60
154
34.25”H x 21.5”W x 11.875”D
32.625”H x 14”W
CH-CSX-K-60-230-000000
$12,035.00
75
192
34.25”H x 21.5”W x 11.875”D
32.625”H x 14”W
CH-CSX-K-75-230-000000
$13,500.00
CH-CSX-K-100-230-000000
$16,070.00
100
248
34.25”H x 21.5”W x 11.875”D
32.625”H x 14”W
125
312
62.25”H x 20.25”W x 15”D
43.5”H x 18.5”W
CH-CSX-K-125-230-000000
$23,727.00
150
360
62.25”H x 20.25”W x 15”D
43.5”H x 18.5”W
CH-CSX-K-150-230-000000
$24,378.00
200
480
62.25”H x 20.25”W x 15”D
43.5”H x 18.5”W
CH-CSX-K-200-230-000000
$29,815.00
250
602
62.25”H x 20.25”W x 15”D
43.5”H x 18.5”W
CH-CSX-K-250-230-000000
$37,569.00
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
56
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
CSX-K SERIES: STANDARD OPTIONS
Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 7/9 Mfg: Killark
(230V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
0
None
1
“Run” (Red) Indicator Light – Front Panel
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
OPTION
CODES
PRICE
ADDER
$0.00
0
None
$0.00
$187.00
2
Adds 2 Terminal Blocks
$6.00
$374.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 3/4” NPSM with an Epoxy Coated Guard. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$392.00
2
H-O-A Switch
$307.00
3
ON-OFF Switch
$307.00
OPTION
CODES
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages.Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 3/4” NPSM with a polished aluminum ring.
H-O-A (Hands-Off-Auto) Switches are 3/4” NPT and are three position
maintained. ON-OFF Switches are two position, 3/4” NPT, level style with
polished aluminum bezel.
OPTION F
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 15 HP)
$125.00
0
None
$0.00
$36.00
2
120VAC Transformer (20 - 30 HP)
$147.00
1
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 60hp
• 75hp - 250hp
$63.00
3
120VAC Transformer (40 - 50 HP)
$179.00
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 10hp
• 15hp - 250hp
$59.00
4
120VAC Transformer (60 - 100 HP)
$200.00
5
120VAC Transformer (125 - 250 HP)
$238.00
2
$125.00
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
two-pole primary fuse block. Fuses are installed in both the primary and
Examples are 15HP, 230V Starter in a NEMA 4 enclosure with H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
CH BASIC
MODEL
CSX-K
HP
15
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
VOLTS
230
OPTION CODES
A B C D E F
0 2 0 2 1 1
57
CSX-K SERIES
Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 7/9 Mfg: Killark
1/4 HP - 300 HP (380V)
Standard Features:
• IEC Contactor with adjustable thermal overload (Class 10).
• Oversized control power transformer (optional).
• External machined flange joint design.
• Integral cast mounting feet.
• Units come standard with hinged covers.
• S.S. (316) captive quick thread cover bolts (optional).
• Ground lug package.
• Steel mounting pan enclosures.
• All enclosures suitable for drilling and tapping.
• Cast from copper – free aluminum – Max 0.25% copper content.
• Stainless steel shot or sandblasted natural finish.
• All enclosures suitable for NEMA 4X (optional).
• Cast aluminum and stainless steel hinge (optional).
• Units are assembled, pre-wired and ready to go straight out of the box.
HP
FULL LOAD AMPS @
380V/3PHASE/60HZ
OVERALL
DIMENSIONS
Compliances:
N.E.C. CL. I, Div. 1&2 Groups B, C & D
CL, II, Div. 1&2 Groups E, F. & G
CL. III, Enclosures 4X
NEMA 3, 4X, 7 & 9
Approvals:
U.L. Listed – Standard 1203
CSA Certified – Standard C22.2 No. 30-M1916
CL. I, Div. 1&2 Groups B, C & D
CL. II, Div. 1&2 Groups E, F & G
CL. III, Enclosure 4X
NEMA 3, 4X, 7 & 9
OVERALL
MOUNTING
BASE PART NUMBER
LIST PRICE
0.25
0.75
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-0.25-380-000000
$3,763.00
0.5
1.3
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-0.5-380-000000
$3,763.00
0.75
1.8
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-0.75-380-000000
$3,763.00
1
2.3
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-1-380-000000
$3,763.00
1.5
3.3
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-1.5-380-000000
$3,763.00
2
4.3
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-2-380-000000
$3,763.00
3
6.1
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-3-380-000000
$3,763.00
$3,776.00
5
9.7
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-5-380-000000
7.5
14
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-7.5-380-000000
$3,814.00
10
18
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-10-380-000000
$3,874.00
15
27
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-15-380-000000
$3,944.00
20
34
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-20-380-000000
$4,117.00
25
43
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-25-380-000000
$4,165.00
30
51
25.5”H x 14.5”W x 9.125”D
21.875”H x 7”W
CH-CSX-K-30-380-000000
$4,951.00
40
66
25.5”H x 14.5”W x 9.125”D
21.875”H x 7”W
CH-CSX-K-40-380-000000
$5,497.00
CH-CSX-K-50-380-000000
$5,610.00
50
83
25.5”H x 14.5”W x 9.125”D
21.875”H x 7”W
60
103
27.25”H x 17.875”W x 11”D
25.625”H x 10.375”W
CH-CSX-K-60-380-000000
$9,988.00
75
128
27.25”H x 17.875”W x 11”D
25.625”H x 10.375”W
CH-CSX-K-75-380-000000
$10,400.00
100
165
27.25”H x 17.875”W x 11”D
25.625”H x 10.375”W
CH-CSX-K-100-380-000000
$11,073.00
125
208
34.25”H x 21.5”W x 11.875”D
32.625”H x 14”W
CH-CSX-K-125-380-000000
$12,680.00
150
240
34.25”H x 21.5”W x 11.875”D
32.625”H x 14”W
CH-CSX-K-150-380-000000
$16,384.00
200
320
34.25”H x 21.5”W x 11.875”D
32.625”H x 14”W
CH-CSX-K-200-380-000000
$16,725.00
250
403
62.25”H x 20.25”W x 15”D
43.5”H x 18.5”W
CH-CSX-K-250-380-000000
$24,921.00
62.25”H x 20.25”W x 15”D
43.5”H x 18.5”W
CH-CSX-K-300-380-000000
$30,548.00
300
482
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
58
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
CSX-K SERIES: STANDARD OPTIONS
Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 7/9 Mfg: Killark
(380V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$187.00
2
Adds 2 Terminal Blocks
$6.00
“Run” (Red) & “Stop” (Green)
Indicator Lights
$374.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
2
Indicator Lights are 3/4” NPSM with an Epoxy Coated Guard. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$392.00
2
H-O-A Switch
$307.00
3
ON-OFF Switch
$307.00
OPTION
CODES
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages.Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 3/4” NPSM with a polished aluminum ring.
H-O-A (Hands-Off-Auto) Switches are 3/4” NPT and are three position
maintained. ON-OFF Switches are two position, 3/4” NPT, level style with
polished aluminum bezel.
OPTION F
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 10 HP)
$152.00
0
None
$0.00
$36.00
2
120VAC Transformer (15 - 50 HP)
$182.00
1
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 75hp
• 100hp - 300hp
$63.00
3
120VAC Transformer (60 - 100 HP)
$126.00
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 10hp
• 15hp - 300hp
$59.00
4
120VAC Transformer (125 - 200 HP)
$254.00
5
120VAC Transformer (250 - 300 HP)
$306.00
2
$125.00
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
two-pole primary fuse block. Fuses are installed in both the primary and
Examples are 15HP, 380V Starter in a NEMA 4 enclosure with H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
CH BASIC
MODEL
HP
VOLTS
CSX-K
15
380
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
59
CSX-K SERIES
Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 7/9 Mfg: Killark
1/4 HP - 500 HP (460V)
Standard Features:
Compliances:
N.E.C. CL. I, Div. 1&2 Groups B, C & D
CL, II, Div. 1&2 Groups E, F. & G
CL. III, Enclosures 4X
NEMA 3, 4X, 7 & 9
Approvals:
U.L. Listed – Standard 1203
CSA Certified – Standard C22.2 No. 30-M1916
CL. I, Div. 1&2 Groups B, C & D
CL. II, Div. 1&2 Groups E, F & G
CL. III, Enclosure 4X
NEMA 3, 4X, 7 & 9
• IEC Contactor with adjustable thermal overload (Class 10).
• Oversized control power transformer (optional).
• External machined flange joint design.
• Integral cast mounting feet.
• Units come standard with hinged covers.
• S.S. (316) captive quick thread cover bolts (optional).
• Ground lug package.
• Steel mounting pan enclosures.
• All enclosures suitable for drilling and tapping.
• Cast from copper – free aluminum – Max 0.25% copper content.
• Stainless steel shot or sandblasted natural finish.
• All enclosures suitable for NEMA 4X (optional).
• Cast aluminum and stainless steel hinge (optional).
• Units are assembled, pre-wired and ready to go straight out of the box.
HP
FULL LOAD AMPS @
460V/3PHASE/60HZ
OVERALL
DIMENSIONS
OVERALL
MOUNTING
BASE PART NUMBER
LIST PRICE
0.25
0.7
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-0.25-460-000000
$3,763.00
0.5
1.1
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-0.5-460-000000
$3,763.00
0.75
1.6
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-0.75-460-000000
$3,763.00
1
2.1
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-1-460-000000
$3,763.00
1.5
3
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-1.5-460-000000
$3,763.00
CH-CSX-K-2-460-000000
$3,763.00
2
3.4
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
3
4.8
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-3-460-000000
$3,763.00
5
7.6
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-5-460-000000
$3,776.00
7.5
11
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-7.5-460-000000
$3,803.00
10
14
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-10-460-000000
$3,814.00
15
21
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-15-460-000000
$3,874.00
20
27
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-20-460-000000
$4,056.00
25
34
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-25-460-000000
$4,117.00
30
40
25.5”H x 14.5”W x 9.125”D
21.875”H x 7”W
CH-CSX-K-30-460-000000
$4,901.00
40
52
25.5”H x 14.5”W x 9.125”D
21.875”H x 7”W
CH-CSX-K-40-460-000000
$4,930.00
50
65
25.5”H x 14.5”W x 9.125”D
21.875”H x 7”W
CH-CSX-K-50-460-000000
$5,298.00
60
77
27.25”H x 17.875”W x 11”D
25.625”H x 10.375”W
CH-CSX-K-60-460-000000
$9,300.00
75
96
27.25”H x 17.875”W x 11”D
25.625”H x 10.375”W
CH-CSX-K-75-460-000000
$9,874.00
100
124
27.25”H x 17.875”W x 11”D
25.625”H x 10.375”W
CH-CSX-K-100-460-000000
$9,988.00
125
156
34.25”H x 21.5”W x 11.875”D
32.625”H x 14”W
CH-CSX-K-125-460-000000
$12,068.00
150
180
34.25”H x 21.5”W x 11.875”D
32.625”H x 14”W
CH-CSX-K-150-460-000000
$12,680.00
200
240
34.25”H x 21.5”W x 11.875”D
32.625”H x 14”W
CH-CSX-K-200-460-000000
$16,384.00
250
302
62.25”H x 20.25”W x 15”D
43.5”H x 18.5”W
CH-CSX-K-250-460-000000
$23,727.00
300
361
62.25”H x 20.25”W x 15”D
43.5”H x 18.5”W
CH-CSX-K-300-460-000000
$24,806.00
350
414
62.25”H x 20.25”W x 15”D
43.5”H x 18.5”W
CH-CSX-K-350-460-000000
$30,548.00
400
477
62.25”H x 20.25”W x 15”D
43.5”H x 18.5”W
CH-CSX-K-400-460-000000
$30,548.00
450
515
62.25”H x 20.25”W x 15”D
43.5”H x 18.5”W
CH-CSX-K-450-460-000000
$38,647.00
500
590
62.25”H x 20.25”W x 15”D
43.5”H x 18.5”W
CH-CSX-K-500-460-000000
$38,647.00
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
60
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
CSX-K SERIES: STANDARD OPTIONS
Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 7/9 Mfg: Killark
(460V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
0
None
1
“Run” (Red) Indicator Light – Front Panel
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
OPTION
CODES
PRICE
ADDER
$0.00
0
None
$0.00
$187.00
2
Adds 2 Terminal Blocks
$6.00
$374.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 3/4” NPSM with an Epoxy Coated Guard. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$392.00
2
H-O-A Switch
$307.00
3
ON-OFF Switch
$307.00
OPTION
CODES
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages.Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 3/4” NPSM with a polished aluminum ring.
H-O-A (Hands-Off-Auto) Switches are 3/4” NPT and are three position
maintained. ON-OFF Switches are two position, 3/4” NPT, level style with
polished aluminum bezel.
OPTION F
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 25 HP)
$125.00
0
None
$0.00
$36.00
2
120VAC Transformer (30 - 50 HP)
$147.00
1
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 125hp
• 130hp - 500hp
$63.00
3
120VAC Transformer (60 - 100 HP)
$179.00
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 20hp
• 25hp - 500hp
$59.00
4
120VAC Transformer (125 - 200 HP)
$200.00
5
120VAC Transformer (250 - 500 HP)
$238.00
2
$125.00
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
two-pole primary fuse block. Fuses are installed in both the primary and
Examples are 15HP, 460V Starter in a NEMA 4 enclosure with H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
BASIC
MODEL
HP
VOLTS
CH CSX-K
15
460
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
61
CSX-K SERIES
Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 7/9 Mfg: Killark
1/4 HP - 500 HP (575V)
Standard Features:
Compliances:
N.E.C. CL. I, Div. 1&2 Groups B, C & D
CL, II, Div. 1&2 Groups E, F. & G
CL. III, Enclosures 4X
NEMA 3, 4X, 7 & 9
Approvals:
U.L. Listed – Standard 1203
CSA Certified – Standard C22.2 No. 30-M1916
CL. I, Div. 1&2 Groups B, C & D
CL. II, Div. 1&2 Groups E, F & G
CL. III, Enclosure 4X
NEMA 3, 4X, 7 & 9
• IEC Contactor with adjustable thermal overload (Class 10).
• Oversized control power transformer (optional).
• External machined flange joint design.
• Integral cast mounting feet.
• Units come standard with hinged covers.
• S.S. (316) captive quick thread cover bolts (optional).
• Ground lug package.
• Steel mounting pan enclosures.
• All enclosures suitable for drilling and tapping.
• Cast from copper – free aluminum – Max 0.25% copper content.
• Stainless steel shot or sandblasted natural finish.
• All enclosures suitable for NEMA 4X (optional).
• Cast aluminum and stainless steel hinge (optional).
• Units are assembled, pre-wired and ready to go straight out of the box.
FULL LOAD AMPS @
HP
575V/3PHASE/60HZ
OVERALL
DIMENSIONS
OVERALL
MOUNTING
BASE PART NUMBER
LIST PRICE
0.25
0.64
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-0.25-575-000000
$3,763.00
0.5
0.9
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-0.5-575-000000
$3,763.00
0.75
1.3
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-0.75-575-000000
$3,763.00
1
1.7
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-1-575-000000
$3,763.00
1.5
2.4
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-1.5-575-000000
$3,763.00
2
2.7
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-2-575-000000
$3,763.00
3
3.9
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-3-575-000000
$3,763.00
5
6.1
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-5-575-000000
$3,763.00
7.5
9
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-7.5-575-000000
$3,776.00
10
11
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-10-575-000000
$3,803.00
15
17
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-15-575-000000
$3,833.00
20
22
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-20-575-000000
$3,874.00
25
27
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CSX-K-25-575-000000
$4,056.00
30
32
25.5”H x 14.5”W x 9.125”D
21.875”H x 7”W
CH-CSX-K-30-575-000000
$4,883.00
40
41
25.5”H x 14.5”W x 9.125”D
21.875”H x 7”W
CH-CSX-K-40-575-000000
$4,901.00
50
52
25.5”H x 14.5”W x 9.125”D
21.875”H x 7”W
CH-CSX-K-50-575-000000
$4,930.00
60
62
27.25”H x 17.875”W x 11”D
25.625”H x 10.375”W
CH-CSX-K-60-575-000000
$9,090.00
75
77
27.25”H x 17.875”W x 11”D
25.625”H x 10.375”W
CH-CSX-K-75-575-000000
$9,300.00
100
99
27.25”H x 17.875”W x 11”D
25.625”H x 10.375”W
CH-CSX-K-100-575-000000
$9,874.00
125
1
125
34.25”H x 21.5”W x 11.875”D
32.625”H x 14”W
CH-CSX-K-125-575-000010
$11,392.00
150
1
144
34.25”H x 21.5”W x 11.875”D
32.625”H x 14”W
CH-CSX-K-150-575-000010
$12,035.00
200
1
192
34.25”H x 21.5”W x 11.875”D
32.625”H x 14”W
CH-CSX-K-200-575-000010
$13,500.00
250
1
242
62.25”H x 20.25”W x 15”D
43.5”H x 18.5”W
CH-CSX-K-250-575-000010
$23,073.00
300
1
289
62.25”H x 20.25”W x 15”D
43.5”H x 18.5”W
CH-CSX-K-300-575-000010
$23,727.00
350
1
336
62.25”H x 20.25”W x 15”D
43.5”H x 18.5”W
CH-CSX-K-350-575-000010
$24,378.00
400
1
382
62.25”H x 20.25”W x 15”D
43.5”H x 18.5”W
CH-CSX-K-400-575-000010
$26,434.00
450
1
412
62.25”H x 20.25”W x 15”D
43.5”H x 18.5”W
CH-CSX-K-450-575-000010
$29,815.00
500
1
472
62.25”H x 20.25”W x 15”D
43.5”H x 18.5”W
CH-CSX-K-500-575-000010
$29,815.00
1 For Starters 575V, 125 HP - 500 HP, Option E must be selected.
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
62
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
CSX-K SERIES: STANDARD OPTIONS
Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 7/9 Mfg: Killark
(575V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$187.00
2
Adds 2 Terminal Blocks
$6.00
“Run” (Red) & “Stop” (Green)
Indicator Lights
$374.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
2
Indicator Lights are 3/4” NPSM with an Epoxy Coated Guard. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$392.00
2
H-O-A Switch
$307.00
3
ON-OFF Switch
$307.00
OPTION
CODES
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages.Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 3/4” NPSM with a polished aluminum ring.
H-O-A (Hands-Off-Auto) Switches are 3/4” NPT and are three position
maintained. ON-OFF Switches are two position, 3/4” NPT, level style with
polished aluminum bezel.
OPTION F
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 25 HP)
$160.00
0
None
$0.00
$36.00
2
120VAC Transformer (30 - 50 HP)
$193.00
1
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 150hp
• 200hp - 500hp
$63.00
3
120VAC Transformer (60 - 100 HP)
$240.00
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 25hp
• 30hp - 500hp
$59.00
4
120VAC Transformer (125 - 200 HP)
$271.00
5
120VAC Transformer (250 - 500 HP)
$327.00
2
$125.00
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
two-pole primary fuse block. Fuses are installed in both the primary and
Examples are 15HP, 575V Starter in a NEMA 4 enclosure with H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
BASIC
MODEL
HP
VOLTS
CH CSX-K
15
575
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
63
FVNR Non-Combination Motor Starters 1/4 HP – 500 HP, NEMA 4X Enclosed, Polyester Enclosure
ES4XP SERIES
Heavy Duty, Corrosion Resistant, Molded Fiberglass Enclosure with gray injection coloring.
All components are mounted to enclosure’s back-pan. The enclosure is rated for NEMA 4X
applications. IEC contactor with adjustable thermal overload (Class 10). NEMA, UL, CSA &
IEC rated components only. A wide range of standard options make it possible to adapt a
“standard” control to your particular needs. Oversized Control Power Transformer (optional).
Units are assembled, pre-wired and ready to go straight out of the box.
Technical Data and Specifications
ENCLOSURE
Applications
• Designed to enclose electrical and/or electronic equipment and
protect against harsh, industrial environments.
Standards
• UL 508 Type 3R, 4, 12 and 13
• CSA Type 3R, 4, 12 and 13
Complies with:
• NEMA Type 3R, 4, 12 and 13
• IEC 529, IP66
Construction
• Body and cover are formed from 16 gauge steel.
• Smooth, continuously welded seams without knockouts, cutouts,
or holes.
• Formed lip on enclosure to exclude flowing liquids and
contaminants.
• 14 gauge welded brackets provide for enclosure mounting.
• Continuously hinged cover has 304 stainless steel hinges and
provides 180º opening.
• Door latches feature the added safety of quarter turn slot requiring
use of tool for opening.
• Quarter turn latches formed from black zinc diecast.
• Oil resistant gaskets are permanently secured.
• Models larger than 4”x4” include a removable 14 gauge
galvanized inner panel.
Finish
• Cover and enclosure are finished in recoatable smooth ANSI/ASA
61 gray powder coating.
• Inner panels are unpainted galvanized steel, (50-200HP) and
above are painted white.
CONTACTOR
Standards
• Compact frame sizes from 7A to 250A
• Common accessories for all contactor sizes
• Panel or 35mm DIN rail mountable
• Simple to exchange coils
• Finger-touch protection
• Front and side mountable auxiliary contact blocks
• Replaceable main contacts for entire line
• Positively driven contacts and operations
• Front and side mounted auxiliary contacts
• Wide coil voltage selection
• Designed to perform over 1 million electrical and 10 million
mechanical operations
Certifications:
• cULus
• IEC 60947
• CE
• Test/Reset button
• Selectable Manual or Automatic Reset
• Separate mounting capability via screws or DIN rail
CONTROL POWER TRANSFORMER
Standards
• Control Power Transformers meet or exceeds the
standards established by UL, CSA, IRC, ANSI, NEMA.
Standard
UL (ANSI/UL 506)
CSA (C22-2 No. 66)
IEC 989
NEMA (ST-1)
File No.
E50394
LR3902
VA Size
All Units
All Units
All Molded Units
All Units
Core & Coils
• High quality, high permeability silicon steel laminations.
• All-welded construction.
• Computer designed copper wound coils with optimum turns ratio.
Finger Safe Terminal Covers
• Finger safe terminal covers for both fused and un-fused terminals, in
a clear, see through finish, are available for all molded transformer
series units.
Standard Secondary Fuse Clips
• Each transformer has a single secondary and comes with a factory
installed secondary fuse kit. (fuses are not included.)
• Accommodates 13/32” x 1-1/2” Midget Fuse.
PUSH BUTTONS
Standards: IEC/EN 60947-5-1, VDE 0660,
NFC63140, UL 508, UL 50, CENELEC EN50007
Degree of Protection: IP66 (IEC/EN60529)
UL Ratings: Type 1,2,3,3R,3S,4,4X,5,12,12K e 13
Contacts Resistance: ≤ 25mΩ (IEC/EN 60255)
Electrical Shock Protection: Class II
Temperature Range: -25ºC to 70ºC
Vibration Resistance (IEC/EN 6068-2-6): 16g with frequency
range from 40 to 500HZ and max shifting 0.75mm (peak-to-peak)
FUSES
• Time Delay, Rejection Type Fast Acting; Branch Circuit Fuse
Class CC, Class CC- Rejection Feature
Voltage Rating: 600 Volts AC or Less
Interrupting Rating: 200,000A RMS Sym
Agency Approvals: Std. 248-4, Class CC, UL Listed, Guide JDDZ,
File E4273, CSA Certified, Class 1422-01, File 53787
OVERLOAD
Standards
• Phase failure/unbalance sensitivity
• Ambient temperature compensation
• Isolated N.C. “Trip” and N.O. “Alarm” auxiliary contacts
• Class 10 tripping characteristics
• “Trip Free” design
• Field adjustable trip current setting
64
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
Technical Drawing
ES4XP SERIES
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
65
ES4XP SERIES
Non-Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 4X Polyester
1/4 HP - 200 HP (230V)
Standard Features:
• Heavy Duty, Corrosion Resistant.
• Molded Fiberglass Enclosure with gray injection coloring.
• All components are mounted to enclosure’s back-pan.
• The enclosure is rated for NEMA 4X applications.
• IEC contactor with adjustable thermal overload (Class 10).
• NEMA, UL, CSA & IEC rated components only.
• A wide range of standard options make it possible to adapt a “standard”
control to your particular needs.
• Oversized Control Power Transformer (optional).
• Units are assembled, pre-wired and ready to go straight out of the box
HP
FULL LOAD AMPS @
230V/3PHASE/60HZ
OVERALL
DIMENSIONS
OVERALL
MOUNTING
BASE PART NUMBER
LIST PRICE
0.25
1.4
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-0.25-230-000000
$719.00
0.5
2.2
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-0.5-230-000000
$719.00
0.75
3.2
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-0.75-230-000000
$719.00
1
4.2
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-1-230-000000
$719.00
1.5
6.0
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-1.5-230-000000
$719.00
2
6.8
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-2-230-000000
$719.00
3
9.6
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-3-230-000000
$730.00
$784.00
5
15.2
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-5-230-000000
7.5
22
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-7.5-230-000000
$820.00
10
28
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-10-230-000000
$889.00
15
42
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-15-230-000000
$979.00
20
54
14.13”H x 12.26”W x 6.13”D
15.19”H x 11.01”W
CH-ES4XP-20-230-000000
$1,056.00
25
68
14.13”H x 12.26”W x 6.13”D
15.19”H x 11.01”W
CH-ES4XP-25-230-000000
$1,077.00
30
80
14.13”H x 12.26”W x 6.13”D
15.19”H x 11.01”W
CH-ES4XP-30-230-000000
$1,253.00
40
104
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-ES4XP-40-230-000000
$1,487.00
$1,623.00
50
130
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-ES4XP-50-230-000000
60
154
24”H x 20”W x 10.13”D
25.06”H x 18.75”W
CH-ES4XP-60-230-000000
$2,899.00
75
192
24”H x 20”W x 10.13”D
25.06”H x 18.75”W
CH-ES4XP-75-230-000000
$4,363.00
100
248
24”H x 20”W x 10.13”D
25.06”H x 18.75”W
CH-ES4XP-100-230-000000
$5,160.00
125
312
24”H x 24”W x 10.13”D
25.06”H x 22.75”W
CH-ES4XP-125-230-000000
$5,909.00
150
360
24”H x 24”W x 10.13”D
25.06”H x 22.75”W
CH-ES4XP-150-230-000000
$6,560.00
200
480
24”H x 24”W x 10.13”D
25.06”H x 22.75”W
CH-ES4XP-200-230-000000
$9,940.00
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
66
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
ES4XP SERIES: STANDARD OPTIONS
Non-Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 4X Polyester
(230V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$38.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$76.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$36.00
2
H-O-A Switch
$34.00
3
ON-OFF Switch
$24.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages. Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
0
OPTION
CODES
PRICE
ADDER
None
Adds 1 N.O. & 1 N. C. Aux Contact
1
• 0.25hp - 60hp
• 75hp - 200hp
2
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 10hp
• 15hp - 200hp
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 15 HP)
$125.00
$36.00
2
120VAC Transformer (20 - 30 HP)
$147.00
$63.00
3
120VAC Transformer (40 - 50 HP)
$179.00
$59.00
4
120VAC Transformer (60 - 100 HP)
$200.00
$125.00
5
120VAC Transformer (125 - 200 HP)
$238.00
$0.00
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
Examples are
are 15HP,
15HP, 230V
Starter in
in a
a NEMA
NEMA 4
4 enclosure
enclosure with
with H-O-A
H-O-A
Examples
V Starter
Switch, 2
2 Terminal
Terminal Blocks,
Blocks, 115VAC
115VAC Contactor
Contactor Coil
Coil &
& CPT
CPT. Add
Addprices
prices
Switch,
for options
options to
to price
price for
for Basic
Basic Enclosed
Enclosed Starter.
Starter.
for
two-pole primary fuse block. Fuses are installed in both the primary and
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
CH BASIC
MODEL
HP
VOLTS
ES4XP
15
230
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
67
ES4XP SERIES
Non-Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 4X Polyester
1/4 HP - 300 HP (380V)
Standard Features:
• Heavy Duty, Corrosion Resistant.
• Molded Fiberglass Enclosure with gray injection coloring.
• All components are mounted to enclosure’s back-pan.
• The enclosure is rated for NEMA 4X applications.
• IEC contactor with adjustable thermal overload (Class 10).
• NEMA, UL, CSA & IEC rated components only.
• A wide range of standard options make it possible to adapt a “standard”
control to your particular needs.
• Oversized Control Power Transformer (optional).
• Units are assembled, pre-wired and ready to go straight out of the box
HP
FULL LOAD AMPS @
380V/3PHASE/60HZ
OVERALL
DIMENSIONS
OVERALL
MOUNTING
BASE PART NUMBER
LIST PRICE
0.25
0.75
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-0.25-380-000000
$732.00
0.5
1.3
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-0.5-380-000000
$732.00
0.75
1.8
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-0.75-380-000000
$732.00
1
2.3
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-1-380-000000
$732.00
1.5
3.3
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-1.5-380-000000
$732.00
2
4.3
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-2-380-000000
$732.00
3
6.1
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-3-380-000000
$732.00
5
9.7
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-5-380-000000
$744.00
7.5
14
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-7.5-380-000000
$783.00
10
18
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-10-380-000000
$842.00
15
27
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-15-380-000000
$913.00
20
34
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-20-380-000000
$974.00
25
43
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-25-380-000000
$1,022.00
30
51
14.13”H x 12.26”W x 6.13”D
15.19”H x 11.01”W
CH-ES4XP-30-380-000000
$1,088.00
40
66
14.13”H x 12.26”W x 6.13”D
15.19”H x 11.01”W
CH-ES4XP-40-380-000000
$1,287.00
50
83
14.13”H x 12.26”W x 6.13”D
15.19”H x 11.01”W
CH-ES4XP-50-380-000000
$1,400.00
60
103
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-ES4XP-60-380-000000
$1,542.00
75
128
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-ES4XP-75-380-000000
$2,068.00
100
165
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-ES4XP-100-380-000000
$2,509.00
125
208
24”H x 20”W x 10.13”D
25.06”H x 18.75”W
CH-ES4XP-125-380-000000
$3,544.00
150
240
24”H x 20”W x 10.13”D
25.06”H x 18.75”W
CH-ES4XP-150-380-000000
$5,424.00
200
320
24”H x 20”W x 10.13”D
25.06”H x 18.75”W
CH-ES4XP-200-380-000000
$5,815.00
250
403
24”H x 24”W x 10.13”D
25.06”H x 22.75”W
CH-ES4XP-250-380-000000
$7,103.00
300
482
24”H x 24”W x 10.13”D
25.06”H x 22.75”W
CH-ES4XP-300-380-000000
$10,673.00
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
68
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
ES4XP SERIES: STANDARD OPTIONS
Non-Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 4X Polyester
(380V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$38.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$76.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$36.00
2
H-O-A Switch
$34.00
3
ON-OFF Switch
$24.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages. Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
0
None
Adds 1 N.O. & 1 N. C. Aux Contact
1
• 0.25hp - 75hp
• 100hp - 300hp
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
2
OPTION
CODES
PRICE
ADDER
• 0.25hp - 15hp
• 20hp - 300hp
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 10 HP)
$152.00
$36.00
2
120VAC Transformer (15 - 50 HP)
$182.00
$63.00
3
120VAC Transformer (60 - 100 HP)
$126.00
$59.00
4
120VAC Transformer (125 - 200 HP)
$254.00
$125.00
5
120VAC Transformer (250 - 300 HP)
$306.00
$0.00
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
Examples are
are 15HP,
15HP, 380V
Starter in
in a
a NEMA
NEMA 4
4 enclosure
enclosure with
with H-O-A
H-O-A
Examples
V Starter
Switch, 2
2 Terminal
Terminal Blocks,
Blocks, 115VAC
115VAC Contactor
Contactor Coil
Coil &
& CPT
CPT. Add
Addprices
prices
Switch,
for options
options to
to price
price for
for Basic
Basic Enclosed
Enclosed Starter.
Starter.
for
two-pole primary fuse block. Fuses are installed in both the primary and
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
CH BASIC
MODEL
HP
VOLTS
ES4XP
15
380
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
69
ES4XP SERIES
Non-Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 4X Polyester
1/4 HP - 400 HP (460V)
Standard Features:
• Heavy Duty, Corrosion Resistant.
• Molded Fiberglass Enclosure with gray injection coloring.
• All components are mounted to enclosure’s back-pan.
• The enclosure is rated for NEMA 4X applications.
• IEC contactor with adjustable thermal overload (Class 10).
• NEMA, UL, CSA & IEC rated components only.
• A wide range of standard options make it possible to adapt a “standard”
control to your particular needs.
• Oversized Control Power Transformer (optional).
• Units are assembled, pre-wired and ready to go straight out of the box.
HP
FULL LOAD AMPS @
460V/3PHASE/60HZ
OVERALL
DIMENSIONS
OVERALL
MOUNTING
BASE PART NUMBER
LIST PRICE
0.25
0.7
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-0.25-460-000000
$732.00
0.5
1.1
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-0.5-460-000000
$732.00
0.75
1.6
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-0.75-460-000000
$732.00
$732.00
1
2.1
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-1-460-000000
1.5
3
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-1.5-460-000000
$732.00
2
3.4
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-2-460-000000
$732.00
3
4.8
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-3-460-000000
$732.00
5
7.6
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-5-460-000000
$744.00
7.5
11
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-7.5-460-000000
$771.00
10
14
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-10-460-000000
$783.00
15
21
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-15-460-000000
$842.00
$913.00
20
27
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-20-460-000000
25
34
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-25-460-000000
$974.00
30
40
14.13”H x 12.26”W x 6.13”D
15.19”H x 11.01”W
CH-ES4XP-30-460-000000
$1,038.00
40
52
14.13”H x 12.26”W x 6.13”D
15.19”H x 11.01”W
CH-ES4XP-40-460-000000
$1,068.00
50
65
14.13”H x 12.26”W x 6.13”D
15.19”H x 11.01”W
CH-ES4XP-50-460-000000
$1,088.00
60
77
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-ES4XP-60-460-000000
$1,340.00
75
96
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-ES4XP-75-460-000000
$1,542.00
100
124
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-ES4XP-100-460-000000
$1,656.00
$2,932.00
125
156
24”H x 20”W x 10.13”D
25.06”H x 18.75”W
CH-ES4XP-125-460-000000
150
180
24”H x 20”W x 10.13”D
25.06”H x 18.75”W
CH-ES4XP-150-460-000000
$3,544.00
200
240
24”H x 20”W x 10.13”D
25.06”H x 18.75”W
CH-ES4XP-200-460-000000
$5,474.00
250
302
24”H x 24”W x 10.13”D
25.06”H x 22.75”W
CH-ES4XP-250-460-000000
$5,909.00
300
361
24”H x 24”W x 10.13”D
25.06”H x 22.75”W
CH-ES4XP-300-460-000000
$6,988.00
350
414
24”H x 24”W x 10.13”D
25.06”H x 22.75”W
CH-ES4XP-350-460-000000
$10,673.00
400
477
24”H x 24”W x 10.13”D
25.06”H x 22.75”W
CH-ES4XP-400-460-000000
$10,673.00
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
70
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
ES4XP SERIES: STANDARD OPTIONS
Non-Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 4X Polyester
(460V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$38.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$76.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$36.00
2
H-O-A Switch
$34.00
3
ON-OFF Switch
$24.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages. Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
0
None
Adds 1 N.O. & 1 N. C. Aux Contact
1
• 0.25hp - 125hp
• 150hp - 400hp
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
2
OPTION
CODES
PRICE
ADDER
• 0.25hp - 20hp
• 25hp - 400hp
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 25 HP)
$125.00
$36.00
2
120VAC Transformer (30 - 50 HP)
$147.00
$63.00
3
120VAC Transformer (60 - 100 HP)
$179.00
$59.00
4
120VAC Transformer (125 - 200 HP)
$200.00
$125.00
5
120VAC Transformer (250 - 400 HP)
$238.00
$0.00
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
two-pole primary fuse block. Fuses are installed in both the primary and
Examples are 15HP, 460 V Starter in a NEMA 4 enclosure with H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
CH BASIC
MODEL
HP
VOLTS
ES4XP
15
460
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
71
ES4XP SERIES
Non-Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 4X Polyester
1/4 HP - 400 HP (575V)
Standard Features:
• Heavy Duty, Corrosion Resistant.
• Molded Fiberglass Enclosure with gray injection coloring.
• All components are mounted to enclosure’s back-pan.
• The enclosure is rated for NEMA 4X applications.
• IEC contactor with adjustable thermal overload (Class 10).
• NEMA, UL, CSA & IEC rated components only.
• A wide range of standard options make it possible to adapt a “standard”
control to your particular needs.
• Oversized Control Power Transformer (optional).
• Units are assembled, pre-wired and ready to go straight out of the box.
575V/3PHASE/60HZ
OVERALL
DIMENSIONS
OVERALL
MOUNTING
0.25
0.64
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-0.25-575-000000
$732.00
0.5
0.9
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-0.5-575-000000
$732.00
0.75
1.3
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-0.75-575-000000
$732.00
1
1.7
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-1-575-000000
$732.00
1.5
2.4
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-1.5-575-000000
$732.00
2
2.7
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-2-575-000000
$732.00
3
3.9
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-3-575-000000
$732.00
5
6.1
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-5-575-000000
$732.00
7.5
9
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-7.5-575-000000
$744.00
10
11
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-10-575-000000
$771.00
15
17
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-15-575-000000
$802.00
20
22
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-20-575-000000
$842.00
25
27
12.13”H x 10.26”W x 6.13”D
13.19”H x 9.01”W
CH-ES4XP-25-575-000000
$913.00
30
32
14.13”H x 12.26”W x 6.13”D
15.19”H x 11.01”W
CH-ES4XP-30-575-000000
$1,020.00
40
41
14.13”H x 12.26”W x 6.13”D
15.19”H x 11.01”W
CH-ES4XP-40-575-000000
$1,038.00
50
52
14.13”H x 12.26”W x 6.13”D
15.19”H x 11.01”W
CH-ES4XP-50-575-000000
$1,068.00
60
62
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-ES4XP-60-575-000000
$1,130.00
75
77
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-ES4XP-75-575-000000
$1,340.00
100
99
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-ES4XP-100-575-000000
$1,542.00
FULL LOAD AMPS @
HP
BASE PART NUMBER
LIST PRICE
125
1
125
24”H x 20”W x 10.13”D
25.06”H x 18.75”W
CH-ES4XP-125-575-000010
$2,487.00
150
1
144
24”H x 20”W x 10.13”D
25.06”H x 18.75”W
CH-ES4XP-150-575-000010
$2,899.00
200
1
192
24”H x 20”W x 10.13”D
25.06”H x 18.75”W
CH-ES4XP-200-575-000010
$4,363.00
250
1
242
24”H x 24”W x 10.13”D
25.06”H x 22.75”W
CH-ES4XP-250-575-000010
$5,254.00
300
1
289
24”H x 24”W x 10.13”D
25.06”H x 22.75”W
CH-ES4XP-300-575-000010
$5,909.00
350
1
336
24”H x 24”W x 10.13”D
25.06”H x 22.75”W
CH-ES4XP-350-575-000010
$6,560.00
400
1
382
24”H x 24”W x 10.13”D
25.06”H x 22.75”W
CH-ES4XP-400-575-000010
$6,560.00
1 For Starters 575V, 125 HP - 500 HP, Option E must be selected.
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
72
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
ES4XP SERIES: STANDARD OPTIONS
Non-Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 4X Polyester
(575V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$38.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$76.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$36.00
2
H-O-A Switch
$34.00
3
ON-OFF Switch
$24.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages. Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 25 HP)
$160.00
0
None
$0.00
$36.00
2
120VAC Transformer (30 - 50 HP)
1
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 150hp
• 125hp - 400hp
$193.00
$63.00
3
120VAC Transformer (60 - 100 HP)
$240.00
$59.00
4
120VAC Transformer (125 - 200 HP)
$271.00
$125.00
5
120VAC Transformer (250 - 400 HP)
$327.00
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
2
• 0.25hp - 25hp
• 30hp - 400hp
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
Examples
are
575V
Starter
a
enclosure
with
H-O-A
Examples
are 15HP,
15HP,
V 115VAC
Starter in
inContactor
a NEMA
NEMA 4
4Coil
enclosure
with
H-O-A
Switch,
2
Terminal
Blocks,
&
CPT.
Addprices
prices
Switch,
2
Terminal
Blocks,
115VAC
Contactor
Coil
&
CPT
Add
for
options
to
price
for
Basic
Enclosed
Starter.
for options to price for Basic Enclosed Starter.
two-pole primary fuse block. Fuses are installed in both the primary and
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
CH BASIC
MODEL
HP
VOLTS
ES4XP
15
575
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
73
FVNR Combination Motor Starters 1/4 HP – 500 HP, NEMA 4X Enclosed, Polyester Enclosure
CS4XP SERIES
74
Heavy Duty, Corrosion Resistant, Molded Fiberglass Enclosure with gray injection coloring.
All components are mounted to enclosure’s back-pan. The enclosure is rated for NEMA 4X
applications. IEC contactor with adjustable thermal overload (Class 10). NEMA, UL, CSA &
IEC rated components only. A wide range of standard options make it possible to adapt a
“standard” control to your particular needs. Oversized Control Power Transformer (optional).
Molded case circuit breaker with through-the door 4X handle. Units are assembled, pre-wired
and ready to go straight out of the box.
Technical Data and Specifications
Core & Coils
• High quality, high permeability silicon steel laminations.
• All-welded construction.
• Computer designed copper wound coils with optimum turns ratio.
Finger Safe Terminal Covers
• Finger safe terminal covers for both fused and un-fused terminals, in
a clear, see through finish, are available for all molded transformer
series units.
Standard Secondary Fuse Clips
• Each transformer has a single secondary and comes with a factory
installed secondary fuse kit. (fuses are not included.)
• Accommodates 13/32” x 1-1/2” Midget Fuse.
CIRCUIT BREAKERS
Thermal-Magnetic Circuit Breaker with Non-interchangeable
Trip Units
• 15 –600 Amperes.
• 120, 240, 277, 480Y/277, 600Y/347, 690V AC 50/60Hz, 125,
125/250V DC.
• 1, 2 and 3 poles.
Standards and Certifications
Molded case circuit breakers are designed to conform with
the following standards:
• Underwriters Laboratories, Inc., Standard UL489, Molded Case Circuit Breakers &
Circuit Breaker Enclosures.
• National Electrical Manufacturers Association Standard Publication
No. AB1-1993, Molded Case Circuit Breakers.
• Australian Standard AS 2184, Molded Case Circuit Breakers.
• British Standards Institution Standard BS 4752: Part 1,Switchgear & Control Gear
Part 1: Circuit Breakers.
• Canadian Standards Association Standard C22.2 No. 5, Service Entrance & Branch
Circuit Breakers.
• International Electrotechnical Commission Recommendations IEC 157-1, Circuit
Breakers.
• Japanese T-Mark Standard Molded Case Circuit Breakers.
• South African Bureau of Standards, Standard SABS 156, Standard Specification for
Molded Case Circuit Breakers.
• Swiss Electro-Technical Association Standard SEV 157-1, Safety
Regulations for Circuit Breakers.
• Union Technique de l’Electricite Switchgear & Control Gear Circuit Breaker
Requirements.
• Verband Deutscher Elektrotechniker (Association of German Electrical Engineers)
Standard VDE 0660, Low Voltage Switchgear & Control Gear, CBs.
Conformance with these standards satisfies most local and international codes,
assuming user acceptability and simplified application.
Innovation
New innovative design allows higher MCP-Starter combination interrupting ratings.
Operator
Door mounted, front rotary operating handle allows for external operation of the interior
mounted motor circuit protector. The unit is pad-lockable and includes a door interlock
mechanism. Available in NEMA 1, 3R, 12 and 4/4X ratings to cover a wide array of
applications and environments.
Molded case circuit breakers equal or exceed Federal Specification Classification
W-C 475b requirements for the particular class associated with the circuit breaker
frame being considered.
PUSH BUTTONS
Standards: IEC/EN 60947-5-1, VDE 0660,
NFC63140, UL 508, UL 50, CENELEC EN50007
Degree of Protection: IP66 (IEC/EN60529)
UL Ratings: Type 1,2,3,3R,3S,4,4X,5,12,12K e 13
Contacts Resistance: ≤ 25mΩ (IEC/EN 60255)
Electrical Shock Protection: Class II
Temperature Range: -25ºC to 70ºC
Vibration Resistance (IEC/EN 6068-2-6): 16g with frequency
range from 40 to 500HZ and max shifting 0.75mm (peak-to-peak)
FUSES
• Time Delay, Rejection Type Fast Acting; Branch Circuit Fuse
Class CC, Class CC- Rejection Feature
Voltage Rating: 600 Volts AC or Less
Interrupting Rating: 200,000A RMS Sym
Agency Approvals: Std. 248-4, Class CC, UL Listed, Guide JDDZ,
File E4273, CSA Certified, Class 1422-01, File 53787
ENCLOSURE
Applications
• Designed to enclose electrical and/or electronic equipment and
protect against harsh, industrial environments.
Standards
• UL 508 Type 3R, 4, 12 and 13
• CSA Type 3R, 4, 12 and 13
Complies with:
• NEMA Type 3R, 4, 12 and 13
• IEC 529, IP66
Construction
• Body and cover are formed from 16 gauge steel.
• Smooth, continuously welded seams without knockouts, cutouts,
or holes.
• Formed lip on enclosure to exclude flowing liquids and
contaminants.
• 14 gauge welded brackets provide for enclosure mounting.
• Continuously hinged cover has 304 stainless steel hinges and
provides 180º opening.
• Door latches feature the added safety of quarter turn slot requiring
use of tool for opening.
• Quarter turn latches formed from black zinc diecast.
• Oil resistant gaskets are permanently secured.
• Models larger than 4”x4” include a removable 14 gauge
galvanized inner panel.
Finish
• Cover and enclosure are finished in recoatable smooth ANSI/ASA
61 gray powder coating.
• Inner panels are unpainted galvanized steel, (50-200HP) and
above are painted white.
CONTACTOR
Standards
• Compact frame sizes from 7A to 250A
• Common accessories for all contactor sizes
• Panel or 35mm DIN rail mountable
• Simple to exchange coils
• Finger-touch protection
• Front and side mountable auxiliary contact blocks
• Replaceable main contacts for entire line
• Positively driven contacts and operations
• Front and side mounted auxiliary contacts
• Wide coil voltage selection
• Designed to perform over 1 million electrical and 10 million
mechanical operations
Certifications:
• cULus
• IEC 60947
• CE
OVERLOAD
Standards
• Phase failure/unbalance sensitivity
• Ambient temperature compensation
• Isolated N.C. “Trip” and N.O. “Alarm” auxiliary contacts
• Class 10 tripping characteristics
• “Trip Free” design
• Field adjustable trip current setting
• Test/Reset button
• Selectable Manual or Automatic Reset
• Separate mounting capability via screws or DIN rail
CONTROL POWER TRANSFORMER
Standards
• Control Power Transformers meet or exceeds the
standards established by UL, CSA, IRC, ANSI, NEMA.
Standard
File No.
VA Size
All Units
UL (ANSI/UL 506)
E50394
All Units
CSA (C22-2 No. 66)
LR3902
All Molded Units
IEC 989
All Units
NEMA (ST-1)
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
Technical Drawing
CS4XP SERIES
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
75
CS4XP SERIES
Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 4X Polyester
1/4 HP - 100 HP (230V)
Standard Features:
• Heavy Duty, Corrosion Resistant.
• Molded Fiberglass Enclosure with gray injection coloring.
• All components are mounted to enclosure’s back-pan.
• The enclosure is rated for NEMA 4X applications.
• IEC contactor with adjustable thermal overload (Class 10).
• NEMA, UL, CSA & IEC rated components only.
• A wide range of standard options make it possible to adapt a “standard”
control to your particular needs.
• Oversized Control Power Transformer (optional).
• Molded case circuit breaker with through-the door 4X handle.
• Units are assembled, pre-wired and ready to go straight out of the box.
FULL LOAD AMPS @
230V/3PHASE/60HZ
OVERALL
DIMENSIONS
0.25
1.4
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-0.25-230-000000
$1,373.00
0.5
2.2
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-0.5-230-000000
$1,373.00
0.75
3.2
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-0.75-230-000000
$1,373.00
1
4.2
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-1-230-000000
$1,373.00
1.5
6.0
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-1.5-230-000000
$1,373.00
2
6.8
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-2-230-000000
$1,373.00
3
9.6
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-3-230-000000
$1,384.00
5
15.2
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-5-230-000000
$1,438.00
7.5
22
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-7.5-230-000000
$1,474.00
10
28
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-10-230-000000
$1,655.00
15
42
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-15-230-000000
$1,745.00
20
54
18.40”H x 16.40”W x 8.13”D
19.28”H x 14.97”W
CH-CS4XP-20-230-000000
$2,260.00
25
68
18.40”H x 16.40”W x 8.13”D
19.28”H x 14.97”W
CH-CS4XP-25-230-000000
$2,281.00
30
80
18.40”H x 16.40”W x 8.13”D
19.28”H x 14.97”W
CH-CS4XP-30-230-000000
$2,457.00
40
104
18.40”H x 16.40”W x 8.13”D
19.28”H x 14.97”W
CH-CS4XP-40-230-000000
$3,021.00
50
130
18.40”H x 16.40”W x 8.13”D
19.28”H x 14.97”W
CH-CS4XP-50-230-000000
$3,157.00
60
154
24”H x 24”W x 10.13”D
25.06”H x 22.75”W
CH-CS4XP-60-230-000000
$3,683.00
75
192
24”H x 24”W x 10.13”D
25.06”H x 22.75”W
CH-CS4XP-75-230-000000
$5,147.00
25.06”H x 22.75”W
CH-CS4XP-100-230-000000
$8,685.00
HP
100
248
OVERALL
MOUNTING
24”H x 24”W x 10.13”D
BASE PART NUMBER
LIST PRICE
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
76
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
CS4XP SERIES: STANDARD OPTIONS
Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 4X Polyester
(230V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$38.00
2
Adds 2 Terminal Blocks
$6.00
“Run” (Red) & “Stop” (Green)
Indicator Lights
$76.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
2
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$36.00
2
H-O-A Switch
$34.00
3
ON-OFF Switch
$24.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages.Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
0
OPTION
CODES
PRICE
ADDER
None
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 15 HP)
$125.00
$36.00
2
120VAC Transformer (20 - 30 HP)
$147.00
$63.00
3
120VAC Transformer (40 - 50 HP)
$179.00
$59.00
4
120VAC Transformer (60 - 100 HP)
$200.00
$0.00
Adds 1 N.O. & 1 N. C. Aux Contact
1
• 0.25hp - 60hp
• 75hp - 100hp
2
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 10hp
• 15hp - 100hp
PRICE
ADDER
Control Power Transformers come standard with secondary fuse clip and a
$125.00
two-pole primary fuse block. Fuses are installed in both the primary and
Auxiliary contacts are stackable and mount to the side of the contactor
secondary of the transformers.
(left or right side).
Examples are 15HP, 230V Starter in a NEMA 4 enclosure with H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
BASIC
MODEL
HP
VOLTS
CH CS4XP
15
230
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
77
CS4XP SERIES
Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 4X Polyester
1/4 HP - 200 HP (380V)
Standard Features:
• Heavy Duty, Corrosion Resistant.
• Molded Fiberglass Enclosure with gray injection coloring.
• All components are mounted to enclosure’s back-pan.
• The enclosure is rated for NEMA 4X applications.
• IEC contactor with adjustable thermal overload (Class 10).
• NEMA, UL, CSA & IEC rated components only.
• A wide range of standard options make it possible to adapt a “standard”
control to your particular needs.
• Oversized Control Power Transformer (optional).
• Molded case circuit breaker with through-the door 4X handle.
• Units are assembled, pre-wired and ready to go straight out of the box.
HP
FULL LOAD AMPS @
380V/3PHASE/50HZ
OVERALL
DIMENSIONS
OVERALL
MOUNTING
BASE PART NUMBER
LIST PRICE
0.75
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-0.25-380-000000
$1,386.00
0.5
1.3
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-0.5-380-000000
$1,386.00
0.75
1.8
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-0.75-380-000000
$1,386.00
1
2.3
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-1-380-000000
$1,386.00
1.5
3.3
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-1.5-380-000000
$1,386.00
2
4.3
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-2-380-000000
$1,386.00
3
6.1
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-3-380-000000
$1,386.00
5
9.7
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-5-380-000000
$1,398.00
7.5
14
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-7.5-380-000000
$1,437.00
10
18
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-10-380-000000
$1,496.00
15
27
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-15-380-000000
$1,567.00
20
34
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-20-380-000000
$1,740.00
25
43
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-25-380-000000
$1,787.00
30
51
18.40”H x 16.40”W x 8.13”D
19.28”H x 14.97”W
CH-CS4XP-30-380-000000
$1,934.00
40
66
18.40”H x 16.40”W x 8.13”D
19.28”H x 14.97”W
CH-CS4XP-40-380-000000
$2,492.00
50
83
18.40”H x 16.40”W x 8.13”D
19.28”H x 14.97”W
CH-CS4XP-50-380-000000
$2,605.00
60
103
18.40”H x 16.40”W x 8.13”D
19.28”H x 14.97”W
CH-CS4XP-60-380-000000
$3,076.00
75
128
18.40”H x 16.40”W x 8.13”D
19.28”H x 14.97”W
CH-CS4XP-75-380-000000
$3,602.00
100
165
18.40”H x 16.40”W x 8.13”D
19.28”H x 14.97”W
CH-CS4XP-100-380-000000
$3,326.00
125
208
24”H x 24”W x 10.13”D
25.06”H x 22.75”W
CH-CS4XP-125-380-000000
$4,328.00
150
240
24”H x 24”W x 10.13”D
25.06”H x 22.75”W
CH-CS4XP-150-380-000000
$8,998.00
200
320
24”H x 24”W x 10.13”D
25.06”H x 22.75”W
CH-CS4XP-200-380-000000
$9,339.00
0.25
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
78
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
CS4XP SERIES: STANDARD OPTIONS
Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 4X Polyester
(380V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$38.00
2
Adds 2 Terminal Blocks
$6.00
“Run” (Red) & “Stop” (Green)
Indicator Lights
$76.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
2
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$36.00
2
H-O-A Switch
$34.00
3
ON-OFF Switch
$24.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages.Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
0
OPTION
CODES
PRICE
ADDER
None
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 10 HP)
$152.00
$36.00
2
120VAC Transformer (15 - 50 HP)
$182.00
$63.00
3
120VAC Transformer (60 - 100 HP)
$126.00
$59.00
4
120VAC Transformer (125 - 200 HP)
$254.00
$0.00
Adds 1 N.O. & 1 N. C. Aux Contact
1
• 0.25hp - 75hp
• 100hp - 200hp
2
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 15hp
• 20hp - 200hp
PRICE
ADDER
Control Power Transformers come standard with secondary fuse clip and a
$125.00
two-pole primary fuse block. Fuses are installed in both the primary and
Auxiliary contacts are stackable and mount to the side of the contactor
secondary of the transformers.
(left or right side).
Examples are 15HP, 380V Starter in a NEMA 4 enclosure with H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
BASIC
MODEL
HP
VOLTS
CH CS4XP
15
380
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
79
CS4XP SERIES
Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 4X Polyester
1/4 HP - 200 HP (460V)
Standard Features:
• Heavy Duty, Corrosion Resistant.
• Molded Fiberglass Enclosure with gray injection coloring.
• All components are mounted to enclosure’s back-pan.
• The enclosure is rated for NEMA 4X applications.
• IEC contactor with adjustable thermal overload (Class 10).
• NEMA, UL, CSA & IEC rated components only.
• A wide range of standard options make it possible to adapt a “standard”
control to your particular needs.
• Oversized Control Power Transformer (optional).
• Molded case circuit breaker with through-the door 4X handle.
• Units are assembled, pre-wired and ready to go straight out of the box.
HP
FULL LOAD AMPS @
460V/3PHASE/60HZ
OVERALL
DIMENSIONS
OVERALL
MOUNTING
BASE PART NUMBER
LIST PRICE
0.25
0.7
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-0.25-460-000000
$1,386.00
0.5
1.1
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-0.5-460-000000
$1,386.00
0.75
1.6
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-0.75-460-000000
$1,386.00
1
2.1
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-1-460-000000
$1,386.00
1.5
3
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-1.5-460-000000
$1,386.00
2
3.4
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-2-460-000000
$1,386.00
3
4.8
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-3-460-000000
$1,386.00
5
7.6
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-5-460-000000
$1,398.00
7.5
11
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-7.5-460-000000
$1,425.00
10
14
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-10-460-000000
$1,437.00
15
21
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-15-460-000000
$1,496.00
20
27
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-20-460-000000
$1,679.00
25
34
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-25-460-000000
$1,740.00
30
40
18.40”H x 16.40”W x 8.13”D
19.28”H x 14.97”W
CH-CS4XP-30-460-000000
$1,884.00
40
52
18.40”H x 16.40”W x 8.13”D
19.28”H x 14.97”W
CH-CS4XP-40-460-000000
$1,914.00
50
65
18.40”H x 16.40”W x 8.13”D
19.28”H x 14.97”W
CH-CS4XP-50-460-000000
$2,292.00
60
77
18.40”H x 16.40”W x 8.13”D
19.28”H x 14.97”W
CH-CS4XP-60-460-000000
$2,502.00
75
96
18.40”H x 16.40”W x 8.13”D
19.28”H x 14.97”W
CH-CS4XP-75-460-000000
$3,076.00
100
124
18.40”H x 16.40”W x 8.13”D
19.28”H x 14.97”W
CH-CS4XP-100-460-000000
$3,190.00
125
156
24”H x 24”W x 10.13”D
25.06”H x 22.75”W
CH-CS4XP-125-460-000000
$3,716.00
150
180
24”H x 24”W x 10.13”D
25.06”H x 22.75”W
CH-CS4XP-150-460-000000
$4,328.00
200
240
24”H x 24”W x 10.13”D
25.06”H x 22.75”W
CH-CS4XP-200-460-000000
$8,998.00
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
80
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
CS4XP SERIES: STANDARD OPTIONS
Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 4X Polyester
(460V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$38.00
2
Adds 2 Terminal Blocks
$6.00
“Run” (Red) & “Stop” (Green)
Indicator Lights
$76.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
2
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$36.00
0
None
$0.00
2
H-O-A Switch
$34.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
3
ON-OFF Switch
$24.00
Please call Cordyne for coil voltages.Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
0
OPTION
CODES
PRICE
ADDER
None
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 25 HP)
$125.00
$36.00
2
120VAC Transformer (30 - 50 HP)
$147.00
$63.00
3
120VAC Transformer (60 - 100 HP)
$179.00
$59.00
4
120VAC Transformer (125 - 200 HP)
$200.00
$0.00
Adds 1 N.O. & 1 N. C. Aux Contact
1
• 0.25hp - 100hp
• 125hp - 200hp
2
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 20hp
• 25hp - 200hp
PRICE
ADDER
Control Power Transformers come standard with secondary fuse clip and a
$125.00
two-pole primary fuse block. Fuses are installed in both the primary and
Auxiliary contacts are stackable and mount to the side of the contactor
secondary of the transformers.
(left or right side).
Examples are 15HP, 460V Starter in a NEMA 4 enclosure with H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
CH BASIC
MODEL
HP
VOLTS
CS4XP
15
460
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
81
CS4XP SERIES
Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 4X Polyester
1/4 HP - 200 HP (575V)
Standard Features:
• Heavy Duty, Corrosion Resistant.
• Molded Fiberglass Enclosure with gray injection coloring.
• All components are mounted to enclosure’s back-pan.
• The enclosure is rated for NEMA 4X applications.
• IEC contactor with adjustable thermal overload (Class 10).
• NEMA, UL, CSA & IEC rated components only.
• A wide range of standard options make it possible to adapt a “standard”
control to your particular needs.
• Oversized Control Power Transformer (optional).
• Molded case circuit breaker with through-the door 4X handle.
• Units are assembled, pre-wired and ready to go straight out of the box.
FULL LOAD AMPS @
HP
575V/3PHASE/60HZ
OVERALL
DIMENSIONS
OVERALL
MOUNTING
BASE PART NUMBER
LIST PRICE
0.25
0.64
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-0.25-575-000000
$1,386.00
0.5
0.9
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-0.5-575-000000
$1,386.00
0.75
1.3
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-0.75-575-000000
$1,386.00
1
1.7
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-1-575-000000
$1,386.00
1.5
2.4
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-1.5-575-000000
$1,386.00
2
2.7
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-2-575-000000
$1,386.00
3
3.9
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-3-575-000000
$1,386.00
5
6.1
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-5-575-000000
$1,386.00
7.5
9
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-7.5-575-000000
$1,398.00
10
11
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-10-575-000000
$1,425.00
15
17
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-15-575-000000
$1,456.00
20
22
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-20-575-000000
$1,496.00
25
27
16.27”H x 14.40”W x 8.13”D
17.19”H x 13.01”W
CH-CS4XP-25-575-000000
$1,679.00
30
32
18.40”H x 16.40”W x 8.13”D
19.28”H x 14.97”W
CH-CS4XP-30-575-000000
$1,866.00
40
41
18.40”H x 16.40”W x 8.13”D
19.28”H x 14.97”W
CH-CS4XP-40-575-000000
$1,884.00
50
52
18.40”H x 16.40”W x 8.13”D
19.28”H x 14.97”W
CH-CS4XP-50-575-000000
$1,914.00
60
62
18.40”H x 16.40”W x 8.13”D
19.28”H x 14.97”W
CH-CS4XP-60-575-000000
$2,292.00
75
77
18.40”H x 16.40”W x 8.13”D
19.28”H x 14.97”W
CH-CS4XP-75-575-000000
$2,502.00
99
18.40”H x 16.40”W x 8.13”D
19.28”H x 14.97”W
CH-CS4XP-100-575-000000
$3,076.00
125
1
125
24”H x 24”W x 10.13”D
25.06”H x 22.75”W
CH-CS4XP-125-575-000010
$3,988.00
150
1
144
24”H x 24”W x 10.13”D
25.06”H x 22.75”W
CH-CS4XP-150-575-000010
$3,683.00
200
1
192
24”H x 24”W x 10.13”D
25.06”H x 22.75”W
CH-CS4XP-200-575-000010
$5,147.00
100
1 For Starters 575V, 125 HP - 500 HP, Option E must be selected.
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
82
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
CS4XP SERIES: STANDARD OPTIONS
Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 4X Polyester
(575V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$38.00
2
Adds 2 Terminal Blocks
$6.00
“Run” (Red) & “Stop” (Green)
Indicator Lights
$76.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
2
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$36.00
0
None
$0.00
2
H-O-A Switch
$34.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
3
ON-OFF Switch
$24.00
Please call Cordyne for coil voltages.Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
0
OPTION
CODES
PRICE
ADDER
None
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 25 HP)
$160.00
$36.00
2
120VAC Transformer (30 - 50 HP)
$193.00
$63.00
3
120VAC Transformer (60 - 100 HP)
$240.00
$59.00
4
120VAC Transformer (125 - 200 HP)
$271.00
$0.00
Adds 1 N.O. & 1 N. C. Aux Contact
1
• 0.25hp - 150hp
• 200hp
2
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 25hp
• 30hp - 200hp
PRICE
ADDER
Control Power Transformers come standard with secondary fuse clip and a
$125.00
two-pole primary fuse block. Fuses are installed in both the primary and
Auxiliary contacts are stackable and mount to the side of the contactor
secondary of the transformers.
(left or right side).
Examples are 15HP, 575V Starter in a NEMA 4 enclosure with H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
BASIC
MODEL
HP
VOLTS
CH CS4XP
15
575
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
83
FVNR Non-Combination Motor Starters 1/4 HP – 500 HP, NEMA 4X Enclosed, Stainless Steel Enclosure
ES4XS SERIES
Heavy Duty, Corrosion Resistant, 14 gauge Stainless Steel Enclosure with brushed finish.
All components are mounted to enclosure’s back-pan. The enclosure is rated for NEMA 4X
applications. IEC contactor with adjustable thermal overload (Class 10). NEMA, UL, CSA &
IEC rated components only. A wide range of standard options make it possible to adapt a
“standard” control to your particular needs. Oversized Control Power Transformer (optional).
Units are assembled, pre-wired and ready to go straight out of the box.
Technical Data and Specifications
ENCLOSURE
Applications
• Designed to enclose electrical and/or electronic equipment and
protect against harsh, industrial environments.
Standards
• UL 508 Type 3R, 4, 12 and 13
• CSA Type 3R, 4, 12 and 13
Complies with:
• NEMA Type 3R, 4, 12 and 13
• IEC 529, IP66
Construction
• Body and cover are formed from 16 gauge steel.
• Smooth, continuously welded seams without knockouts, cutouts,
or holes.
• Formed lip on enclosure to exclude flowing liquids and
contaminants.
• 14 gauge welded brackets provide for enclosure mounting.
• Continuously hinged cover has 304 stainless steel hinges and
provides 180º opening.
• Door latches feature the added safety of quarter turn slot requiring
use of tool for opening.
• Quarter turn latches formed from black zinc diecast.
• Oil resistant gaskets are permanently secured.
• Models larger than 4”x4” include a removable 14 gauge
galvanized inner panel.
Finish
• Cover and enclosure are finished in recoatable smooth ANSI/ASA
61 gray powder coating.
• Inner panels are unpainted galvanized steel, (50-200HP) and
above are painted white.
CONTACTOR
Standards
• Compact frame sizes from 7A to 250A
• Common accessories for all contactor sizes
• Panel or 35mm DIN rail mountable
• Simple to exchange coils
• Finger-touch protection
• Front and side mountable auxiliary contact blocks
• Replaceable main contacts for entire line
• Positively driven contacts and operations
• Front and side mounted auxiliary contacts
• Wide coil voltage selection
• Designed to perform over 1 million electrical and 10 million
mechanical operations
Certifications:
• cULus
• IEC 60947
• CE
• Test/Reset button
• Selectable Manual or Automatic Reset
• Separate mounting capability via screws or DIN rail
CONTROL POWER TRANSFORMER
Standards
• Control Power Transformers meet or exceeds the
standards established by UL, CSA, IRC, ANSI, NEMA.
Standard
UL (ANSI/UL 506)
CSA (C22-2 No. 66)
IEC 989
NEMA (ST-1)
File No.
E50394
LR3902
VA Size
All Units
All Units
All Molded Units
All Units
Core & Coils
• High quality, high permeability silicon steel laminations.
• All-welded construction.
• Computer designed copper wound coils with optimum turns ratio.
Finger Safe Terminal Covers
• Finger safe terminal covers for both fused and un-fused terminals, in
a clear, see through finish, are available for all molded transformer
series units.
Standard Secondary Fuse Clips
• Each transformer has a single secondary and comes with a factory
installed secondary fuse kit. (fuses are not included.)
• Accommodates 13/32” x 1-1/2” Midget Fuse.
PUSH BUTTONS
Standards: IEC/EN 60947-5-1, VDE 0660,
NFC63140, UL 508, UL 50, CENELEC EN50007
Degree of Protection: IP66 (IEC/EN60529)
UL Ratings: Type 1,2,3,3R,3S,4,4X,5,12,12K e 13
Contacts Resistance: ≤ 25mΩ (IEC/EN 60255)
Electrical Shock Protection: Class II
Temperature Range: -25ºC to 70ºC
Vibration Resistance (IEC/EN 6068-2-6): 16g with frequency
range from 40 to 500HZ and max shifting 0.75mm (peak-to-peak)
FUSES
• Time Delay, Rejection Type Fast Acting; Branch Circuit Fuse
Class CC, Class CC- Rejection Feature
Voltage Rating: 600 Volts AC or Less
Interrupting Rating: 200,000A RMS Sym
Agency Approvals: Std. 248-4, Class CC, UL Listed, Guide JDDZ,
File E4273, CSA Certified, Class 1422-01, File 53787
OVERLOAD
Standards
• Phase failure/unbalance sensitivity
• Ambient temperature compensation
• Isolated N.C. “Trip” and N.O. “Alarm” auxiliary contacts
• Class 10 tripping characteristics
• “Trip Free” design
• Field adjustable trip current setting
84
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
Technical Drawing
ES4XS SERIES
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
85
ES4XS SERIES
Non-Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 4X Stainless Steel
1/4 HP - 250 HP (230V)
Standard Features:
• Heavy Duty, Corrosion Resistant
• 14 gauge Stainless Steel Enclosure with brushed finish.
• All components are mounted to enclosure’s back-pan.
• The enclosure is rated for NEMA 4X applications.
• IEC contactor with adjustable thermal overload (Class 10).
• NEMA, UL, CSA & IEC rated components only.
• A wide range of standard options make it possible to adapt a “standard”
control to your particular needs.
• Oversized Control Power Transformer (optional).
• Units are assembled, pre-wired and ready to go straight out of the box.
HP
FULL LOAD AMPS @
230V/3PHASE/60HZ
OVERALL
DIMENSIONS
OVERALL
MOUNTING
BASE PART NUMBER
LIST PRICE
0.25
1.4
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-0.25-230-000000
$1,313.00
0.5
2.2
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-0.5-230-000000
$1,313.00
0.75
3.2
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-0.75-230-000000
$1,313.00
1
4.2
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-1-230-000000
$1,313.00
1.5
6.0
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-1.5-230-000000
$1,313.00
2
6.8
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-2-230-000000
$1,313.00
3
9.6
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-3-230-000000
$1,324.00
5
15.2
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-5-230-000000
$1,378.00
7.5
22
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-7.5-230-000000
$1,414.00
10
28
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-10-230-000000
$1,483.00
15
42
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-15-230-000000
$1,573.00
20
54
14”H x 12”W x 6”D
14.75”H x 10”W
CH-ES4XS-20-230-000000
$1,681.00
25
68
14”H x 12”W x 6”D
14.75”H x 10”W
CH-ES4XS-25-230-000000
$1,702.00
30
80
14”H x 12”W x 6”D
14.75”H x 10”W
CH-ES4XS-30-230-000000
$1,878.00
40
104
16”H x 14”W x 10”D
16.75”H x 12”W
CH-ES4XS-40-230-000000
$2,381.00
50
130
16”H x 14”W x 10”D
16.75”H x 12”W
CH-ES4XS-50-230-000000
$2,517.00
60
154
24”H x 24”W x 12”D
25.25”H x 18”W
CH-ES4XS-60-230-000000
$4,535.00
75
192
24”H x 24”W x 12”D
25.25”H x 18”W
CH-ES4XS-75-230-000000
$6,000.00
100
248
24”H x 24”W x 12”D
25.25”H x 18”W
CH-ES4XS-100-230-000000
$6,797.00
125
312
24”H x 24”W x 12”D
25.25”H x 18”W
CH-ES4XS-125-230-000000
$7,452.00
150
360
24”H x 24”W x 12”D
25.25”H x 18”W
CH-ES4XS-150-230-000000
$8,102.00
200
480
24”H x 24”W x 12”D
25.25”H x 18”W
CH-ES4XS-200-230-000000
$11,483.00
250
602
30”H x 24”W x 16”D
31.25”H x 18”W
CH-ES4XS-250-230-000000
$15,658.00
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
86
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
ES4XS SERIES: STANDARD OPTIONS
Non-Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 4X Polyester Stainless Steel
(230V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$38.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$76.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$36.00
2
H-O-A Switch
$34.00
3
ON-OFF Switch
$24.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages. Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 15 HP)
$125.00
0
None
$0.00
1
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 60hp
• 75hp - 200hp
$36.00
2
120VAC Transformer (20 - 30 HP)
$147.00
$63.00
3
120VAC Transformer (40 - 50 HP)
$179.00
2
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 10hp
• 15hp - 200hp
$59.00
4
120VAC Transformer (60 - 100 HP)
$200.00
$125.00
5
120VAC Transformer (125 - 250 HP)
$238.00
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
two-pole primary fuse block. Fuses are installed in both the primary and
Examples are 15HP, 230V
V Starter in a NEMA 4 enclosure with H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
BASIC
MODEL
HP
VOLTS
CH ES4XS
15
230
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
87
ES4XS SERIES
Non-Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 4X Stainless Steel
1/4 HP - 300 HP (380V)
Standard Features:
• Heavy Duty, Corrosion Resistant
• 14 gauge Stainless Steel Enclosure with brushed finish.
• All components are mounted to enclosure’s back-pan.
• The enclosure is rated for NEMA 4X applications.
• IEC contactor with adjustable thermal overload (Class 10).
• NEMA, UL, CSA & IEC rated components only.
• A wide range of standard options make it possible to adapt a “standard”
control to your particular needs.
• Oversized Control Power Transformer (optional).
• Units are assembled, pre-wired and ready to go straight out of the box.
HP
FULL LOAD AMPS @
380V/3PHASE/50HZ
OVERALL
DIMENSIONS
OVERALL
MOUNTING
BASE PART NUMBER
LIST PRICE
0.25
0.75
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-0.25-380-000000
$1,326.00
0.5
1.3
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-0.5-380-000000
$1,326.00
0.75
1.8
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-0.75-380-000000
$1,326.00
1
2.3
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-1-380-000000
$1,326.00
1.5
3.3
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-1.5-380-000000
$1,326.00
2
4.3
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-2-380-000000
$1,326.00
3
6.1
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-3-380-000000
$1,326.00
CH-ES4XS-5-380-000000
$1,338.00
5
9.7
12”H x 12”W x 6”D
12.75”H x 10”W
7.5
14
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-7.5-380-000000
$1,377.00
10
18
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-10-380-000000
$1,436.00
15
27
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-15-380-000000
$1,507.00
20
34
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-20-380-000000
$1,568.00
25
43
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-25-380-000000
$1,616.00
30
51
14”H x 12”W x 6”D
14.75”H x 10”W
CH-ES4XS-30-380-000000
$1,713.00
40
66
14”H x 12”W x 6”D
14.75”H x 10”W
CH-ES4XS-40-380-000000
$1,913.00
50
83
14”H x 12”W x 6”D
14.75”H x 10”W
CH-ES4XS-50-380-000000
$2,025.00
60
103
16”H x 14”W x 10”D
16.75”H x 12”W
CH-ES4XS-60-380-000000
$2,435.00
75
128
16”H x 14”W x 10”D
16.75”H x 12”W
CH-ES4XS-75-380-000000
$2,962.00
100
165
16”H x 14”W x 10”D
16.75”H x 12”W
CH-ES4XS-100-380-000000
$3,403.00
125
208
24”H x 24”W x 12”D
25.25”H x 18”W
CH-ES4XS-125-380-000000
$5,180.00
150
240
24”H x 24”W x 12”D
25.25”H x 18”W
CH-ES4XS-150-380-000000
$7,111.00
200
320
24”H x 24”W x 12”D
25.25”H x 18”W
CH-ES4XS-200-380-000000
$7,452.00
250
403
24”H x 24”W x 12”D
25.25”H x 18”W
CH-ES4XS-250-380-000000
$8,646.00
482
24”H x 24”W x 12”D
25.25”H x 18”W
CH-ES4XS-300-380-000000
$12,216.00
300
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
88
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
ES4XS SERIES: STANDARD OPTIONS
Non-Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 4X Polyester Stainless Steel
(380V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$38.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$76.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$36.00
2
H-O-A Switch
$34.00
3
ON-OFF Switch
$24.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages. Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 10 HP)
$152.00
0
None
$0.00
1
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 75hp
• 100hp - 300hp
$36.00
2
120VAC Transformer (15 - 50 HP)
$182.00
$63.00
3
120VAC Transformer (60 - 100 HP)
$126.00
$59.00
4
120VAC Transformer (125 - 200 HP)
$254.00
$125.00
5
120VAC Transformer (250 - 300 HP)
$306.00
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
2
• 0.25hp - 15hp
• 20hp - 300hp
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
two-pole primary fuse block. Fuses are installed in both the primary and
Examples are 15HP, 380V
V Starter in a NEMA 4 enclosure with H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
BASIC
MODEL
HP
VOLTS
CH ES4XS
15
380
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
89
ES4XS SERIES
Non-Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 4X Stainless Steel
1/4 HP - 500 HP (460V)
Standard Features:
• Heavy Duty, Corrosion Resistant
• 14 gauge Stainless Steel Enclosure with brushed finish.
• All components are mounted to enclosure’s back-pan.
• The enclosure is rated for NEMA 4X applications.
• IEC contactor with adjustable thermal overload (Class 10).
• NEMA, UL, CSA & IEC rated components only.
• A wide range of standard options make it possible to adapt a “standard”
control to your particular needs.
• Oversized Control Power Transformer (optional).
• Units are assembled, pre-wired and ready to go straight out of the box.
HP
0.25
460V/3PHASE/60HZ
OVERALL
DIMENSIONS
OVERALL
MOUNTING
0.7
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-0.25-460-000000
$1,326.00
CH-ES4XS-0.5-460-000000
$1,326.00
FULL LOAD AMPS @
BASE PART NUMBER
LIST PRICE
0.5
1.1
12”H x 12”W x 6”D
12.75”H x 10”W
0.75
1.6
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-0.75-460-000000
$1,326.00
1
2.1
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-1-460-000000
$1,326.00
1.5
3
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-1.5-460-000000
$1,326.00
2
3.4
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-2-460-000000
$1,326.00
3
4.8
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-3-460-000000
$1,326.00
5
7.6
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-5-460-000000
$1,338.00
7.5
11
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-7.5-460-000000
$1,365.00
CH-ES4XS-10-460-000000
$1,377.00
10
14
12”H x 12”W x 6”D
12.75”H x 10”W
15
21
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-15-460-000000
$1,436.00
20
27
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-20-460-000000
$1,507.00
25
34
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-25-460-000000
$1,568.00
30
40
14”H x 12”W x 6”D
14.75”H x 10”W
CH-ES4XS-30-460-000000
$1,663.00
40
52
14”H x 12”W x 6”D
14.75”H x 10”W
CH-ES4XS-40-460-000000
$1,693.00
50
65
14”H x 12”W x 6”D
14.75”H x 10”W
CH-ES4XS-50-460-000000
$1,713.00
60
77
16”H x 14”W x 10”D
16.75”H x 12”W
CH-ES4XS-60-460-000000
$2,234.00
CH-ES4XS-75-460-000000
$2,435.00
75
96
16”H x 14”W x 10”D
16.75”H x 12”W
100
124
16”H x 14”W x 10”D
16.75”H x 12”W
CH-ES4XS-100-460-000000
$2,550.00
125
156
24”H x 24”W x 12”D
25.25”H x 18”W
CH-ES4XS-125-460-000000
$4,568.00
150
180
24”H x 24”W x 12”D
25.25”H x 18”W
CH-ES4XS-150-460-000000
$5,180.00
200
240
24”H x 24”W x 12”D
25.25”H x 18”W
CH-ES4XS-200-460-000000
$7,111.00
250
302
24”H x 24”W x 12”D
25.25”H x 18”W
CH-ES4XS-250-460-000000
$7,452.00
300
361
24”H x 24”W x 12”D
25.25”H x 18”W
CH-ES4XS-300-460-000000
$8,531.00
350
414
24”H x 24”W x 12”D
25.25”H x 18”W
CH-ES4XS-350-460-000000
$12,216.00
400
477
24”H x 24”W x 12”D
25.25”H x 18”W
CH-ES4XS-400-460-000000
$12,216.00
450
515
30”H x 24”W x 16”D
31.25”H x 18”W
CH-ES4XS-450-460-000000
$16,737.00
500
590
30”H x 24”W x 16”D
31.25”H x 18”W
CH-ES4XS-500-460-000000
$16,737.00
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
90
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
ES4XS SERIES: STANDARD OPTIONS
Non-Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 4X Polyester Stainless Steel
(460V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$38.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$76.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$36.00
2
H-O-A Switch
$34.00
3
ON-OFF Switch
$24.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages. Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 25 HP)
$125.00
0
None
$0.00
1
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 125hp
• 125hp - 500hp
$36.00
2
120VAC Transformer (30 - 50 HP)
$147.00
$63.00
3
120VAC Transformer (60 - 100 HP)
$179.00
2
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 25hp
• 30hp - 500hp
$59.00
4
120VAC Transformer (125 - 200 HP)
$200.00
$125.00
5
120VAC Transformer (250 - 500 HP)
$238.00
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
two-pole primary fuse block. Fuses are installed in both the primary and
Examples are 15HP, 460V
enclosue with
V Starter in a NEMA 4 enclosure
withH-O-A
H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
BASIC
MODEL
HP
VOLTS
CH ES4XS
15
460
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
91
ES4XS SERIES
Non-Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 4X Stainless Steel
1/4 HP - 500 HP (575V)
Standard Features:
• Heavy Duty, Corrosion Resistant
• 14 gauge Stainless Steel Enclosure with brushed finish.
• All components are mounted to enclosure’s back-pan.
• The enclosure is rated for NEMA 4X applications.
• IEC contactor with adjustable thermal overload (Class 10).
• NEMA, UL, CSA & IEC rated components only.
• A wide range of standard options make it possible to adapt a “standard”
control to your particular needs.
• Oversized Control Power Transformer (optional).
• Units are assembled, pre-wired and ready to go straight out of the box.
FULL LOAD AMPS @
HP
575V/3PHASE/60HZ
OVERALL
MOUNTING
OVERALL
DIMENSIONS
BASE PART NUMBER
LIST PRICE
0.25
0.64
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-0.25-575-000000
$1,326.00
0.5
0.9
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-0.5-575-000000
$1,326.00
0.75
1.3
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-0.75-575-000000
$1,326.00
1
1.7
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-1-575-000000
$1,326.00
1.5
2.4
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-1.5-575-000000
$1,326.00
2
2.7
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-2-575-000000
$1,326.00
3
3.9
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-3-575-000000
$1,326.00
5
6.1
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-5-575-000000
$1,326.00
7.5
9
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-7.5-575-000000
$1,338.00
10
11
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-10-575-000000
$1,365.00
15
17
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-15-575-000000
$1,396.00
20
22
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-20-575-000000
$1,436.00
25
27
12”H x 12”W x 6”D
12.75”H x 10”W
CH-ES4XS-25-575-000000
$1,507.00
30
32
14”H x 12”W x 6”D
14.75”H x 10”W
CH-ES4XS-30-575-000000
$1,645.00
40
41
14”H x 12”W x 6”D
14.75”H x 10”W
CH-ES4XS-40-575-000000
$1,663.00
50
52
14”H x 12”W x 6”D
14.75”H x 10”W
CH-ES4XS-50-575-000000
$1,693.00
60
62
16”H x 14”W x 10”D
16.75”H x 12”W
CH-ES4XS-60-575-000000
$2,024.00
75
77
16”H x 14”W x 10”D
16.75”H x 12”W
CH-ES4XS-75-575-000000
$2,234.00
100
99
16”H x 14”W x 10”D
16.75”H x 12”W
CH-ES4XS-100-575-000000
$2,435.00
125
24”H x 24”W x 12”D
25.25”H x 18”W
CH-ES4XS-125-575-000010
$4,124.00
24”H x 24”W x 12”D
25.25”H x 18”W
CH-ES4XS-150-575-000010
$4,535.00
125
1
150
1
144
200
1
192
24”H x 24”W x 12”D
25.25”H x 18”W
CH-ES4XS-200-575-000010
$6,000.00
24”H x 24”W x 12”D
25.25”H x 18”W
CH-ES4XS-250-575-000010
$6,797.00
1
242
300
1
289
24”H x 24”W x 12”D
25.25”H x 18”W
CH-ES4XS-300-575-000010
$7,452.00
350
1
336
24”H x 24”W x 12”D
25.25”H x 18”W
CH-ES4XS-350-575-000010
$8,102.00
400
1
382
24”H x 24”W x 12”D
25.25”H x 18”W
CH-ES4XS-400-575-000010
$8,102.00
450
1
412
30”H x 24”W x 16”D
31.25”H x 18”W
CH-ES4XS-450-575-000010
$12,224.00
500
1
472
30”H x 24”W x 16”D
31.25”H x 18”W
CH-ES4XS-500-575-000010
$12,224.00
250
1 For Starters 575V, 125 HP - 500 HP, Option E must be selected.
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
92
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
ES4XS SERIES: STANDARD OPTIONS
Non-Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 4X Polyester Stainless Steel
(575V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$38.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$76.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$36.00
2
H-O-A Switch
$34.00
3
ON-OFF Switch
$24.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages. Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 25 HP)
$160.00
0
None
$0.00
1
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 100hp
• 125hp - 500hp
$36.00
2
120VAC Transformer (30 - 50 HP)
$193.00
$63.00
3
120VAC Transformer (60 - 100 HP)
$240.00
2
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 25hp
• 30hp - 500hp
$59.00
4
120VAC Transformer (125 - 200 HP)
$271.00
$125.00
5
120VAC Transformer (250 - 500 HP)
$327.00
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
Examples
Examples are
are 15HP,
15HP, 575VV Starter
Starter in
in aa NEMA
NEMA44 enclosue
enclosurewith
withH-O-A
H-O-A
Switch,
Switch, 22 Terminal
Terminal Blocks,
Blocks, 115VAC
115VAC Contactor
Contactor Coil
Coil && CPT
CPTAdd
Add prices
prices
for
options
to
price
for
Basic
Enclosed
Starter.
for options to price for Basic Enclosed Starter.
two-pole primary fuse block. Fuses are installed in both the primary and
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
BASIC
MODEL
HP
VOLTS
CH ES4XS
15
575
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
93
FVNR Combination Motor Starters 1/4 HP – 500 HP, NEMA 4X Enclosed, Stainless Steel Enclosure
CS4XS SERIES
94
Heavy Duty, Corrosion Resistant, 14 gauge Stainless Steel Enclosure with brushed finish.
All components are mounted to enclosure’s back-pan. The enclosure is rated for NEMA 4X
applications. IEC contactor with adjustable thermal overload (Class 10). NEMA, UL, CSA &
IEC rated components only. A wide range of standard options make it possible to adapt a
“standard” control to your particular needs. Oversized Control Power Transformer (optional).
Molded case circuit breaker with through-the-door 4X handle. Units are assembled, pre-wired
and ready to go straight out of the box.
Technical Data and Specifications
Core & Coils
• High quality, high permeability silicon steel laminations.
• All-welded construction.
• Computer designed copper wound coils with optimum turns ratio.
Finger Safe Terminal Covers
• Finger safe terminal covers for both fused and un-fused terminals, in
a clear, see through finish, are available for all molded transformer
series units.
Standard Secondary Fuse Clips
• Each transformer has a single secondary and comes with a factory
installed secondary fuse kit. (fuses are not included.)
• Accommodates 13/32” x 1-1/2” Midget Fuse.
CIRCUIT BREAKERS
Thermal-Magnetic Circuit Breaker with Non-interchangeable
Trip Units
• 15 –600 Amperes.
• 120, 240, 277, 480Y/277, 600Y/347, 690V AC 50/60Hz, 125,
125/250V DC.
• 1, 2 and 3 poles.
Standards and Certifications
Molded case circuit breakers are designed to conform with
the following standards:
• Underwriters Laboratories, Inc., Standard UL489, Molded Case Circuit Breakers &
Circuit Breaker Enclosures.
• National Electrical Manufacturers Association Standard Publication
No. AB1-1993, Molded Case Circuit Breakers.
• Australian Standard AS 2184, Molded Case Circuit Breakers.
• British Standards Institution Standard BS 4752: Part 1,Switchgear & Control Gear
Part 1: Circuit Breakers.
• Canadian Standards Association Standard C22.2 No. 5, Service Entrance & Branch
Circuit Breakers.
• International Electrotechnical Commission Recommendations IEC 157-1, Circuit
Breakers.
• Japanese T-Mark Standard Molded Case Circuit Breakers.
• South African Bureau of Standards, Standard SABS 156, Standard Specification for
Molded Case Circuit Breakers.
• Swiss Electro-Technical Association Standard SEV 157-1, Safety
Regulations for Circuit Breakers.
• Union Technique de l’Electricite Switchgear & Control Gear Circuit Breaker
Requirements.
• Verband Deutscher Elektrotechniker (Association of German Electrical Engineers)
Standard VDE 0660, Low Voltage Switchgear & Control Gear, CBs.
Conformance with these standards satisfies most local and international codes,
assuming user acceptability and simplified application.
Innovation
New innovative design allows higher MCP-Starter combination interrupting ratings.
Operator
Door mounted, front rotary operating handle allows for external operation of the interior
mounted motor circuit protector. The unit is pad-lockable and includes a door interlock
mechanism. Available in NEMA 1, 3R, 12 and 4/4X ratings to cover a wide array of
applications and environments.
Molded case circuit breakers equal or exceed Federal Specification Classification
W-C 475b requirements for the particular class associated with the circuit breaker
frame being considered.
PUSH BUTTONS
Standards: IEC/EN 60947-5-1, VDE 0660,
NFC63140, UL 508, UL 50, CENELEC EN50007
Degree of Protection: IP66 (IEC/EN60529)
UL Ratings: Type 1,2,3,3R,3S,4,4X,5,12,12K e 13
Contacts Resistance: ≤ 25mΩ (IEC/EN 60255)
Electrical Shock Protection: Class II
Temperature Range: -25ºC to 70ºC
Vibration Resistance (IEC/EN 6068-2-6): 16g with frequency
range from 40 to 500HZ and max shifting 0.75mm (peak-to-peak)
FUSES
• Time Delay, Rejection Type Fast Acting; Branch Circuit Fuse
Class CC, Class CC- Rejection Feature
Voltage Rating: 600 Volts AC or Less
Interrupting Rating: 200,000A RMS Sym
Agency Approvals: Std. 248-4, Class CC, UL Listed, Guide JDDZ,
File E4273, CSA Certified, Class 1422-01, File 53787
ENCLOSURE
Applications
• Designed to enclose electrical and/or electronic equipment and
protect against harsh, industrial environments.
Standards
• UL 508 Type 3R, 4, 12 and 13
• CSA Type 3R, 4, 12 and 13
Complies with:
• NEMA Type 3R, 4, 12 and 13
• IEC 529, IP66
Construction
• Body and cover are formed from 16 gauge steel.
• Smooth, continuously welded seams without knockouts, cutouts,
or holes.
• Formed lip on enclosure to exclude flowing liquids and
contaminants.
• 14 gauge welded brackets provide for enclosure mounting.
• Continuously hinged cover has 304 stainless steel hinges and
provides 180º opening.
• Door latches feature the added safety of quarter turn slot requiring
use of tool for opening.
• Quarter turn latches formed from black zinc diecast.
• Oil resistant gaskets are permanently secured.
• Models larger than 4”x4” include a removable 14 gauge
galvanized inner panel.
Finish
• Cover and enclosure are finished in recoatable smooth ANSI/ASA
61 gray powder coating.
• Inner panels are unpainted galvanized steel, (50-200HP) and
above are painted white.
CONTACTOR
Standards
• Compact frame sizes from 7A to 250A
• Common accessories for all contactor sizes
• Panel or 35mm DIN rail mountable
• Simple to exchange coils
• Finger-touch protection
• Front and side mountable auxiliary contact blocks
• Replaceable main contacts for entire line
• Positively driven contacts and operations
• Front and side mounted auxiliary contacts
• Wide coil voltage selection
• Designed to perform over 1 million electrical and 10 million
mechanical operations
Certifications:
• cULus
• IEC 60947
• CE
OVERLOAD
Standards
• Phase failure/unbalance sensitivity
• Ambient temperature compensation
• Isolated N.C. “Trip” and N.O. “Alarm” auxiliary contacts
• Class 10 tripping characteristics
• “Trip Free” design
• Field adjustable trip current setting
• Test/Reset button
• Selectable Manual or Automatic Reset
• Separate mounting capability via screws or DIN rail
CONTROL POWER TRANSFORMER
Standards
• Control Power Transformers meet or exceeds the
standards established by UL, CSA, IRC, ANSI, NEMA.
Standard
File No.
VA Size
All Units
UL (ANSI/UL 506)
E50394
All Units
CSA (C22-2 No. 66)
LR3902
All Molded Units
IEC 989
All Units
NEMA (ST-1)
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
Technical Drawing
CS4XS SERIES
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
95
CS4XS SERIES
Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 4X Stainless Steel
1/4 HP - 250 HP (230V)
Standard Features:
• Heavy Duty, Corrosion Resistant
• 14 gauge Stainless Steel Enclosure with brushed finish.
• All components are mounted to enclosure’s back-pan.
• The enclosure is rated for NEMA 4X applications.
• IEC contactor with adjustable thermal overload (Class 10).
• NEMA, UL, CSA & IEC rated components only.
• A wide range of standard options make it possible to adapt a “standard”
control to your particular needs.
• Oversized Control Power Transformer (optional).
• Units are assembled, pre-wired and ready to go straight out of the box.
HP
FULL LOAD AMPS @
230V/3PHASE/60HZ
OVERALL
DIMENSIONS
OVERALL
MOUNTING
BASE PART NUMBER
LIST PRICE
0.25
1.4
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-0.25-230-000000
$1,807.00
0.5
2.2
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-0.5-230-000000
$1,807.00
0.75
3.2
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-0.75-230-000000
$1,807.00
1
4.2
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-1-230-000000
$1,807.00
1.5
6.0
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-1.5-230-000000
$1,807.00
2
6.8
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-2-230-000000
$1,807.00
3
9.6
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-3-230-000000
$1,818.00
CH-CS4XS-5-230-000000
$1,872.00
5
15.2
14”H x 12”W x 8”D
14.75”H x 10”W
7.5
22
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-7.5-230-000000
$1,908.00
10
28
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-10-230-000000
$2,089.00
15
42
14”H x 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-15-230-000000
$2,178.00
20
54
16”H x 14”W x 10”D
16.75”H x 12”W
CH-CS4XS-20-230-000000
$2,645.00
25
68
16”H x 14”W x 10”D
16.75”H x 12”W
CH-CS4XS-25-230-000000
$2,665.00
30
80
16”H x 14”W x 10”D
16.75”H x 12”W
CH-CS4XS-30-230-000000
$2,842.00
40
104
16”H x 14”W x 10”D
16.75”H x 12”W
CH-CS4XS-40-230-000000
$3,716.00
CH-CS4XS-50-230-000000
$3,852.00
50
130
16”H x 14”W x 10”D
16.75”H x 12”W
60
154
24”H x 24”W x 12”D
25.25”H x 18”W
CH-CS4XS-60-230-000000
$6,098.00
75
192
24”H x 24”W x 12”D
25.25”H x 18”W
CH-CS4XS-75-230-000000
$7,563.00
100
248
24”H x 24”W x 12”D
25.25”H x 18”W
CH-CS4XS-100-230-000000
$10,155.00
125
312
36”H x 30”W x 16”D
37.25”H x 24”W
CH-CS4XS-125-230-000000
$10,810.00
150
360
36”H x 30”W x 16”D
37.25”H x 24”W
CH-CS4XS-150-230-000000
$11,460.00
200
480
36”H x 30”W x 16”D
37.25”H x 24”W
CH-CS4XS-200-230-000000
$16,942.00
250
602
48”H x 36”W x 16”D
49.25”H x 30”W
CH-CS4XS-250-230-000000
$25,443.00
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
96
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
CS4XS SERIES: STANDARD OPTIONS
Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 4X Polyester Stainless Steel
(230V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$38.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$76.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$36.00
2
H-O-A Switch
$34.00
3
ON-OFF Switch
$24.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages. Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 15 HP)
$125.00
0
None
$0.00
1
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 60hp
• 75hp - 250hp
$36.00
2
120VAC Transformer (20 - 30 HP)
$147.00
$63.00
3
120VAC Transformer (40 - 50 HP)
$179.00
2
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 10hp
• 15hp - 250hp
$59.00
4
120VAC Transformer (60 - 100 HP)
$200.00
$125.00
5
120VAC Transformer (125 - 250 HP)
$238.00
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
Examples are
are 15HP,
15HP, 230V
Starter in
in a
a NEMA
NEMA 4
4 enclosure
enclosure with
with H-O-A
H-O-A
Examples
V Starter
Switch, 2
2 Terminal
Terminal Blocks,
Blocks, 115VAC
115VAC Contactor
Contactor Coil
Coil &
& CPT
CPT Add
Add prices
prices
Switch,
for options
options to
to price
price for
for Basic
Basic Enclosed
Enclosed Starter.
Starter.
for
two-pole primary fuse block. Fuses are installed in both the primary and
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
BASIC
MODEL
HP
VOLTS
CH CS4XS
15
230
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
97
CS4XS SERIES
Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 4X Stainless Steel
1/4 HP - 300 HP (380V)
Standard Features:
• Heavy Duty, Corrosion Resistant
• 14 gauge Stainless Steel Enclosure with brushed finish.
• All components are mounted to enclosure’s back-pan.
• The enclosure is rated for NEMA 4X applications.
• IEC contactor with adjustable thermal overload (Class 10).
• NEMA, UL, CSA & IEC rated components only.
• A wide range of standard options make it possible to adapt a “standard”
control to your particular needs.
• Oversized Control Power Transformer (optional).
• Units are assembled, pre-wired and ready to go straight out of the box.
HP
FULL LOAD AMPS @
380V/3PHASE/60HZ
OVERALL
DIMENSIONS
OVERALL
MOUNTING
BASE PART NUMBER
LIST PRICE
0.25
0.75
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-0.25-380-000000
$1,820.00
0.5
1.3
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-0.5-380-000000
$1,820.00
0.75
1.8
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-0.75-380-000000
$1,820.00
1
2.3
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-1-380-000000
$1,820.00
1.5
3.3
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-1.5-380-000000
$1,820.00
2
4.3
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-2-380-000000
$1,820.00
3
6.1
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-3-380-000000
$1,820.00
5
9.7
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-5-380-000000
$1,832.00
7.5
14
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-7.5-380-000000
$1,871.00
10
18
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-10-380-000000
$1,930.00
15
27
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-15-380-000000
$2,001.00
20
34
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-20-380-000000
$2,174.00
25
43
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-25-380-000000
$2,221.00
30
51
16”H x 14”W x 10”D
16.75”H x 12”W
CH-CS4XS-30-380-000000
$2,319.00
40
66
16”H x 14”W x 10”D
16.75”H x 12”W
CH-CS4XS-40-380-000000
$2,876.00
50
83
16”H x 14”W x 10”D
16.75”H x 12”W
CH-CS4XS-50-380-000000
$2,989.00
60
103
16”H x 14”W x 10”D
16.75”H x 12”W
CH-CS4XS-60-380-000000
$3,885.00
75
128
16”H x 14”W x 10”D
16.75”H x 12”W
CH-CS4XS-75-380-000000
$4,297.00
100
165
16”H x 14”W x 10”D
16.75”H x 12”W
CH-CS4XS-100-380-000000
$4,966.00
125
208
24”H x 24”W x 12”D
25.25”H x 18”W
CH-CS4XS-125-380-000000
$6,743.00
150
240
24”H x 24”W x 12”D
25.25”H x 18”W
CH-CS4XS-150-380-000000
$10,469.00
200
320
24”H x 24”W x 12”D
25.25”H x 18”W
CH-CS4XS-200-380-000000
$10,810.00
250
403
36”H x 30”W x 16”D
37.25”H x 24”W
CH-CS4XS-250-380-000000
$12,004.00
300
482
36”H x 30”W x 16”D
37.25”H x 24”W
CH-CS4XS-300-380-000000
$17,675.00
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard
Non-Standard Options:
Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
98
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
CS4XS SERIES: STANDARD OPTIONS
Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 4X Polyester Stainless Steel
(380V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$38.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$76.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$36.00
2
H-O-A Switch
$34.00
3
ON-OFF Switch
$24.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages. Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 15 HP)
$152.00
0
None
$0.00
1
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 75hp
• 100hp - 300hp
$36.00
2
120VAC Transformer (20 - 30 HP)
$182.00
$63.00
3
120VAC Transformer (40 - 50 HP)
$126.00
2
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 15hp
• 20hp - 300hp
$59.00
4
120VAC Transformer (60 - 100 HP)
$254.00
$125.00
5
120VAC Transformer (125 - 300 HP)
$306.00
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
Examples are
are 15HP,
15HP, 380V
Starter in
in a
a NEMA
NEMA 4
4 enclosure
enclosure with
with H-O-A
H-O-A
Examples
V Starter
Switch, 2
2 Terminal
Terminal Blocks,
Blocks, 115VAC
115VAC Contactor
Contactor Coil
Coil &
& CPT
CPT Add
Add prices
prices
Switch,
for options
options to
to price
price for
for Basic
Basic Enclosed
Enclosed Starter.
Starter.
for
two-pole primary fuse block. Fuses are installed in both the primary and
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
BASIC
MODEL
HP
VOLTS
CH CS4XS
15
380
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
99
CS4XS SERIES
Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 4X Stainless Steel
1/4 HP - 500 HP (460V)
Standard Features:
• Heavy Duty, Corrosion Resistant
• 14 gauge Stainless Steel Enclosure with brushed finish.
• All components are mounted to enclosure’s back-pan.
• The enclosure is rated for NEMA 4X applications.
• IEC contactor with adjustable thermal overload (Class 10).
• NEMA, UL, CSA & IEC rated components only.
• A wide range of standard options make it possible to adapt a “standard”
control to your particular needs.
• Oversized Control Power Transformer (optional).
• Units are assembled, pre-wired and ready to go straight out of the box.
460V/3PHASE/60HZ
OVERALL
DIMENSIONS
0.25
0.7
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-0.25-460-000000
$1,820.00
0.5
1.1
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-0.5-460-000000
$1,820.00
0.75
1.6
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-0.75-460-000000
$1,820.00
1
2.1
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-1-460-000000
$1,820.00
1.5
3
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-1.5-460-000000
$1,820.00
2
3.4
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-2-460-000000
$1,820.00
3
4.8
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-3-460-000000
$1,820.00
5
7.6
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-5-460-000000
$1,832.00
7.5
11
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-7.5-460-000000
$1,859.00
10
14
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-10-460-000000
$1,871.00
15
21
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-15-460-000000
$1,930.00
20
27
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-20-460-000000
$2,113.00
25
34
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-25-460-000000
$2,174.00
30
40
16”H x 14”W x 10”D
16.75”H x 12”W
CH-CS4XS-30-460-000000
$2,269.00
40
52
16”H x 14”W x 10”D
16.75”H x 12”W
CH-CS4XS-40-460-000000
$2,298.00
50
65
16”H x 14”W x 10”D
16.75”H x 12”W
CH-CS4XS-50-460-000000
$2,677.00
60
77
16”H x 14”W x 10”D
16.75”H x 12”W
CH-CS4XS-60-460-000000
$3,197.00
75
96
16”H x 14”W x 10”D
16.75”H x 12”W
CH-CS4XS-75-460-000000
$3,770.00
100
124
16”H x 14”W x 10”D
16.75”H x 12”W
CH-CS4XS-100-460-000000
$3,885.00
125
156
24”H x 24”W x 12”D
25.25”H x 18”W
CH-CS4XS-125-460-000000
$6,131.00
150
180
24”H x 24”W x 12”D
25.25”H x 18”W
CH-CS4XS-150-460-000000
$6,743.00
200
240
24”H x 24”W x 12”D
25.25”H x 18”W
CH-CS4XS-200-460-000000
$10,469.00
250
302
36”H x 30”W x 16”D
37.25”H x 24”W
CH-CS4XS-250-460-000000
$10,810.00
300
361
36”H x 30”W x 16”D
37.25”H x 24”W
CH-CS4XS-300-460-000000
$11,888.00
350
414
36”H x 30”W x 16”D
37.25”H x 24”W
CH-CS4XS-350-460-000000
$17,675.00
400
477
36”H x 30”W x 16”D
37.25”H x 24”W
CH-CS4XS-400-460-000000
$17,675.00
450
515
48”H x 36”W x 16”D
49.25”H x 30”W
CH-CS4XS-450-460-000000
$26,522.00
500
590
48”H x 36”W x 16”D
49.25”H x 30”W
CH-CS4XS-500-460-000000
$26,522.00
HP
FULL LOAD AMPS @
OVERALL
MOUNTING
BASE PART NUMBER
LIST PRICE
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
100
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
CS4XS SERIES: STANDARD OPTIONS
Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 4X Polyester Stainless Steel
(460V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$38.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$74.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$36.00
2
H-O-A Switch
$34.00
3
ON-OFF Switch
$24.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages. Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 25 HP)
$125.00
0
None
$0.00
1
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 125hp
• 150hp - 500hp
$36.00
2
120VAC Transformer (30 - 50 HP)
$147.00
$63.00
3
120VAC Transformer (60 - 100 HP)
$179.00
2
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 20hp
• 25hp - 500hp
$59.00
4
120VAC Transformer (125 - 200 HP)
$200.00
$125.00
5
120VAC Transformer (250 - 500 HP)
$238.00
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
Examples are
are 15HP,
15HP, 460V
Starter in
in a
a NEMA
NEMA 4
4 enclosure
enclosure with
with H-O-A
H-O-A
Examples
V Starter
Switch, 2
2 Terminal
Terminal Blocks,
Blocks, 115VAC
115VAC Contactor
Contactor Coil
Coil &
& CPT
CPT Add
Add prices
prices
Switch,
for options
options to
to price
price for
for Basic
Basic Enclosed
Enclosed Starter.
Starter.
for
two-pole primary fuse block. Fuses are installed in both the primary and
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
BASIC
MODEL
HP
VOLTS
CH CS4XS
15
460
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
101
CS4XS SERIES
Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 4X Stainless Steel
1/4 HP - 500 HP (575V)
Standard Features:
• Heavy Duty, Corrosion Resistant
• 14 gauge Stainless Steel Enclosure with brushed finish.
• All components are mounted to enclosure’s back-pan.
• The enclosure is rated for NEMA 4X applications.
• IEC contactor with adjustable thermal overload (Class 10).
• NEMA, UL, CSA & IEC rated components only.
• A wide range of standard options make it possible to adapt a “standard”
control to your particular needs.
• Oversized Control Power Transformer (optional).
• Units are assembled, pre-wired and ready to go straight out of the box.
FULL LOAD AMPS @
HP
575V/3PHASE/60HZ
OVERALL
DIMENSIONS
OVERALL
MOUNTING
BASE PART NUMBER
LIST PRICE
0.25
0.64
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-0.25-575-000000
$1,820.00
0.5
0.9
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-0.5-575-000000
$1,820.00
0.75
1.3
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-0.75-575-000000
$1,820.00
1
1.7
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-1-575-000000
$1,820.00
1.5
2.4
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-1.5-575-000000
$1,820.00
CH-CS4XS-2-575-000000
$1,820.00
2
2.7
14”Hx 12”W x 8”D
14.75”H x 10”W
3
3.9
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-3-575-000000
$1,820.00
5
6.1
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-5-575-000000
$1,820.00
7.5
9
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-7.5-575-000000
$1,832.00
10
11
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-10-575-000000
$1,859.00
15
17
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-15-575-000000
$1,890.00
20
22
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-20-575-000000
$1,930.00
25
27
14”Hx 12”W x 8”D
14.75”H x 10”W
CH-CS4XS-25-575-000000
$2,113.00
30
32
16”H x 14”W x 10”D
16.75”H x 12”W
CH-CS4XS-30-575-000000
$2,251.00
40
41
16”H x 14”W x 10”D
16.75”H x 12”W
CH-CS4XS-40-575-000000
$2,269.00
50
52
16”H x 14”W x 10”D
16.75”H x 12”W
CH-CS4XS-50-575-000000
$2,298.00
60
62
16”H x 14”W x 10”D
16.75”H x 12”W
CH-CS4XS-60-575-000000
$2,987.00
75
77
16”H x 14”W x 10”D
16.75”H x 12”W
CH-CS4XS-75-575-000000
$3,197.00
100
99
16”H x 14”W x 10”D
16.75”H x 12”W
CH-CS4XS-100-575-000000
$3,770.00
125
1
125
24”H x 24”W x 12”D
25.25”H x 18”W
CH-CS4XS-125-575-000010
$5,459.00
150
1
144
24”H x 24”W x 12”D
25.25”H x 18”W
CH-CS4XS-150-575-000010
$6,098.00
25.25”H x 18”W
CH-CS4XS-200-575-000010
$7,563.00
200
1
192
24”H x 24”W x 12”D
250
1
302
36”H x 30”W x 16”D
37.25”H x 24”W
CH-CS4XS-250-575-000010
$10,155.00
300
1
361
36”H x 30”W x 16”D
37.25”H x 24”W
CH-CS4XS-300-575-000010
$10,810.00
350
1
414
36”H x 30”W x 16”D
37.25”H x 24”W
CH-CS4XS-350-575-000010
$11,460.00
400
1
477
36”H x 30”W x 16”D
37.25”H x 24”W
CH-CS4XS-400-575-000010
$13,561.00
450
1
412
48”H x 36”W x 16”D
49.25”H x 30”W
CH-CS4XS-450-575-000010
$17,682.00
500
1
590
48”H x 36”W x 16”D
49.25”H x 30”W
CH-CS4XS-500-575-000010
$17,682.00
1 For Starters 575V, 125 HP - 500 HP, Option E must be selected.
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
102
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
CS4XS SERIES: STANDARD OPTIONS
Combination, FVNR, IEC Configuration,
Enclosure Ratings: NEMA 4X Polyester Stainless Steel
(575V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$38.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$76.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$36.00
2
H-O-A Switch
$34.00
3
ON-OFF Switch
$24.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages. Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 25 HP)
$160.00
0
None
$0.00
1
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 125hp
• 150hp - 500hp
$36.00
2
120VAC Transformer (30 - 50 HP)
$193.00
$63.00
3
120VAC Transformer (60 - 100 HP)
$240.00
2
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 25hp
• 30hp - 500hp
$59.00
4
120VAC Transformer (125 - 200 HP)
$271.00
$125.00
5
120VAC Transformer (250 - 500 HP)
$327.00
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
Examples are
are 15HP,
15HP, 575V
Starter in
in a
a NEMA
NEMA 4
4 enclosure
enclosure with
with H-O-A
H-O-A
Examples
V Starter
Switch, 2
2 Terminal
Terminal Blocks,
Blocks, 115VAC
115VAC Contactor
Contactor Coil
Coil &
& CPT
CPT Add
Add prices
prices
Switch,
for options
options to
to price
price for
for Basic
Basic Enclosed
Enclosed Starter.
Starter.
for
two-pole primary fuse block. Fuses are installed in both the primary and
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
BASIC
MODEL
HP
VOLTS
CH CS4XS
15
575
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
103
ENSX-K SERIES
Explosion Proof FVNR Non- Combination Motor Starters, NEMA 7/9, 1/4 HP – 500 HP
(Enclosure Manufacturer: Hubbell-Killark)
104
NEMA rated Contactor with Adjustable Thermal Overload (Class10). Oversized Control Power Transformer (optional).
External Machined Flange Joint Design. Units are assembled, pre-wired and ready to go straight out of the box. Integral
Cast Mounting Feet. Units come standard with Hinged Covers. S.S. 316 Captive Quick Thread Cover Bolts (optional).
Ground Lug Package,Steel mounting pan. Enclosures cast from Copper-Free Aluminum – Max 0.25% Copper Content.
Aluminum, Stainless Steel Shot or Sandblasted Natural Finish. Enclosures suitable for NEMA 4X Applications. Cast
aluminum and Stainless Steel Hinge.
Technical Data and Specifications
STARTER
Contactor and overload combinations designed
to meet NEMA standards and are extremely rugged.
• Meets or exceeds all NEMA, UL and CSA standards.
• Sizes based on standard NEMA classifications.
• Designed and built for a variety of demanding applications.
• Easy coil change and inspectable/replaceable contacts
• Adjustable/interchangeable heater packs for flexibility.
• Heaters available in ambient compensated and non-ambient
compensated.
ENCLOSURE
Applications
• Designed to enclose electrical and/or electronic equipment and
protect against harsh, industrial environments.
Standards
• UL 508 Type 3R, 4, 12 and 13
• CSA Type 3R, 4, 12 and 13
Complies with:
• NEMA Type 3R, 4, 12 and 13
• IEC 529, IP66
Construction
• Body and cover are formed from 16 gauge steel.
• Smooth, continuously welded seams without knockouts, cutouts,
or holes.
• Formed lip on enclosure to exclude flowing liquids and
contaminants.
• 14 gauge welded brackets provide for enclosure mounting.
• Continuously hinged cover has 304 stainless steel hinges and
provides 180º opening.
• Door latches feature the added safety of quarter turn slot requiring
use of tool for opening.
• Quarter turn latches formed from black zinc diecast.
• Oil resistant gaskets are permanently secured.
• Models larger than 4”x4” include a removable 14 gauge
galvanized inner panel.
Finish
• Cover and enclosure are finished in recoatable smooth ANSI/ASA
61 gray powder coating.
• Inner panels are unpainted galvanized steel, (50-200HP) and
above are painted white.
• Test/Reset button
• Selectable Manual or Automatic Reset
• Separate mounting capability via screws or DIN rail
CONTROL POWER TRANSFORMER
Standards
• Control Power Transformers meet or exceeds the
standards established by UL, CSA, IRC, ANSI, NEMA.
Standard
UL (ANSI/UL 506)
CSA (C22-2 No. 66)
IEC 989
NEMA (ST-1)
File No.
E50394
LR3902
VA Size
All Units
All Units
All Molded Units
All Units
Core & Coils
• High quality, high permeability silicon steel laminations.
• All-welded construction.
• Computer designed copper wound coils with optimum turns ratio.
Finger Safe Terminal Covers
• Finger safe terminal covers for both fused and un-fused terminals, in
a clear, see through finish, are available for all molded transformer
series units.
Standard Secondary Fuse Clips
• Each transformer has a single secondary and comes with a factory
installed secondary fuse kit. (fuses are not included.)
• Accommodates 13/32” x 1-1/2” Midget Fuse.
PUSH BUTTONS
Standards: IEC/EN 60947-5-1, VDE 0660,
NFC63140, UL 508, UL 50, CENELEC EN50007
Degree of Protection: IP66 (IEC/EN60529)
UL Ratings: Type 1,2,3,3R,3S,4,4X,5,12,12K e 13
Contacts Resistance: ≤ 25mΩ (IEC/EN 60255)
Electrical Shock Protection: Class II
Temperature Range: -25ºC to 70ºC
Vibration Resistance (IEC/EN 6068-2-6): 16g with frequency
range from 40 to 500HZ and max shifting 0.75mm (peak-to-peak)
FUSES
• Time Delay, Rejection Type Fast Acting; Branch Circuit Fuse
Class CC, Class CC- Rejection Feature
Voltage Rating: 600 Volts AC or Less
Interrupting Rating: 200,000A RMS Sym
Agency Approvals: Std. 248-4, Class CC, UL Listed, Guide JDDZ,
File E4273, CSA Certified, Class 1422-01, File 53787
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
Technical Drawing
ENSX-K SERIES
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
105
ENSX-K SERIES
Non- Combination, FVNR, NEMA Configuration
Enclosure Ratings: NEMA 7/9 Mfg: Killark
1/4 HP - 200 HP (230V)
Standard Features:
• NEMA rated Contactor with Adjustable Thermal Overload (Class10).
• Oversized Control Power Transformer (optional).
• External Machined Flange Joint Design.
• Units are assembled, pre-wired and ready to go straight out of the box.
• Integral Cast Mounting Feet.
• Units come standard with Hinged Covers.
• S.S. 316 Captive Quick Thread Cover Bolts (optional).
• Ground Lug Package.
• Steel mounting pan.
• Enclosures cast from Copper-Free Aluminum – Max 0.25% Copper Content.
• Aluminum, Stainless Steel Shot or Sandblasted Natural Finish.
• Enclosures suitable for NEMA 4X Applications.
• Cast aluminum and Stainless Steel Hinge.
OVERALL
MOUNTING
NEMA
SIZE
OVERALL
DIMENSIONS
2.2
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-0.5-230-000000
$3,581.00
0.75*
3.2
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-0.75-230-000000
$3,581.00
1*
4.2
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-1-230-000000
$3,581.00
1.5*
6.0
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-1.5-230-000000
$3,581.00
2*
6.8
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-2-230-000000
$3,581.00
3*
9.6
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-3-230-000000
$3,581.00
5*
15.2
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-5-230-000000
$3,642.00
7.5*
22
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-7.5-230-000000
$3,642.00
10
28
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-10-230-000000
$4,045.00
15
42
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-15-230-000000
$4,045.00
20
54
26.25”H x 12.5”W x 10.75”D
24.625”H x 5”W
CH-ENSX-K-20-230-000000
$6,505.00
25
68
26.25”H x 12.5”W x 10.75”D
24.625”H x 5”W
CH-ENSX-K-25-230-000000
$6,505.00
30
80
26.25”H x 12.5”W x 10.75”D
24.625”H x 5”W
CH-ENSX-K-30-230-000000
$6,505.00
40
104
34.25”H x 16.5”W x 11.5”D
32.625”H x 9”W
CH-ENSX-K-40-230-000000
$8,565.00
50
130
34.25”H x 16.5”W x 11.5”D
32.625”H x 9”W
CH-ENSX-K-50-230-000000
$8,565.00
60
154
34.25”H x 16.5”W x 11.5”D
31.56”H x 27.56”W
CH-ENSX-K-60-230-000000
$30,911.00
$30,911.00
HP
0.25*
0.5*
1
2
3
4
5
6
FULL LOAD AMPS @
230V/3PHASE/60HZ
HP
OVERALL
MOUNTING
DIMENSIONS
FULL LOAD AMPS @
18.375”H x 5”W
20”H x 12.5”W x 9.125”D
1.4
MOUNTING
OVERALL
BASE PART NUMBER
LIST PRICE
BASE
PART NUMBER
LIST PRICE$3,581.00
CH-ENSX-K-0.25-230-000000
75
192
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ENSX-K-75-230-000000
100
248
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ENSX-K-100-230-000000
$30,911.00
125
312
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ENSX-K-125-230-000000
$40,515.00
150
360
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ENSX-K-150-230-000000
$40,515.00
200
480
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ENSX-K-200-230-000000
$40,515.00
* If CPT option is NOT chosen for 0.25 to 15 HP, enclosure overall size will be 18”H X 11”W X 9.125”D (mounting dimensions 16.375”H X 3.625”W) and a
$150 deduction can be taken from the corresponding list price.
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
106
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
ENSX-K SERIES: STANDARD OPTIONS
Non-Combination, FVNR, NEMAConfiguration,
Enclosure Ratings: NEMA 7/9 Mfg: Killark
(230V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$187.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$374.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$392.00
2
H-O-A Switch
$307.00
3
ON-OFF Switch
$307.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages. Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
0
1
2
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 15 HP)
$125.00
None
$0.00
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 15hp
• 20hp – 100hp
• 125hp - 200hp
$68.00
$136.00
$444.00
2
120VAC Transformer (20 - 30 HP)
$147.00
3
120VAC Transformer (40 - 50 HP)
$179.00
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 15hp
• 20hp – 100hp
• 125hp - 200HP
$136.00
$271.00
$888.00
4
120VAC Transformer (60 - 100 HP)
$200.00
5
120VAC Transformer (125 - 200 HP)
$238.00
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
Examples are
are 15HP,
15HP, 230V
Starter in
in a
a NEMA
NEMA 4
4 enclosure
enclosure with
with H-O-A
H-O-A
Examples
V Starter
Switch, 2
2 Terminal
Terminal Blocks,
Blocks, 115VAC
115VAC Contactor
Contactor Coil
Coil &
& CPT
CPT Add
Add prices
prices
Switch,
for options
options to
to price
price for
for Basic
Basic Enclosed
Enclosed Starter.
Starter.
for
two-pole primary fuse block. Fuses are installed in both the primary and
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
CH BASIC
MODEL
ENSX-K
HP
VOLTS
15
230
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
107
ENSX-K SERIES
Non- Combination, FVNR, NEMA Configuration
Enclosure Ratings: NEMA 7/9 Mfg: Killark
1/4 HP - 400 HP (460V)
Standard Features:
• NEMA rated Contactor with Adjustable Thermal Overload (Class10).
• Oversized Control Power Transformer (optional).
• External Machined Flange Joint Design.
• Units are assembled, pre-wired and ready to go straight out of the box.
• Integral Cast Mounting Feet.
• Units come standard with Hinged Covers.
• S.S. 316 Captive Quick Thread Cover Bolts (optional).
• Ground Lug Package.
• Steel mounting pan.
• Enclosures cast from Copper-Free Aluminum – Max 0.25% Copper Content.
• Aluminum, Stainless Steel Shot or Sandblasted Natural Finish.
• Enclosures suitable for NEMA 4X Applications.
• Cast aluminum and Stainless Steel Hinge.
OVERALL
MOUNTING
NEMA
SIZE
1
2
3
4
5
6
HP
HP
0.25*
FULL LOAD AMPS @
OVERALL
MOUNTING
DIMENSIONS
FULL LOAD AMPS @
18.375”H x 5”W
20”H x 12.5”W
x 9.125”D
0.7
MOUNTING
OVERALL
460V/3PHASE/60HZ
OVERALL
DIMENSIONS
BASE PART NUMBER
LIST PRICE
BASE
PART NUMBER
LIST PRICE
$3,581.00
CH-ENSX-K-0.25-460-000000
CH-ENSX-K-0.5-460-000000
$3,581.00
0.5*
1.1
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
0.75*
1.6
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-0.75-460-000000
$3,581.00
1*
2.1
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-1-460-000000
$3,581.00
1.5*
3
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-1.5-460-000000
$3,581.00
2*
3.4
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-2-460-000000
$3,581.00
3*
4.8
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-3-460-000000
$3,581.00
5*
7.6
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-5-460-000000
$3,581.00
7.5*
11
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-7.5-460-000000
$3,642.00
CH-ENSX-K-10-460-000000
$3,642.00
10*
14
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
15
21
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-15-460-000000
$4,045.00
20
27
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-20-460-000000
$4,045.00
25
34
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-25-460-000000
$4,045.00
30
40
26.25”H x 12.5”W x 10.75”D
24.625”H x 5”W
CH-ENSX-K-30-460-000000
$6,505.00
40
52
26.25”H x 12.5”W x 10.75”D
24.625”H x 5”W
CH-ENSX-K-40-460-000000
$6,505.00
50
65
26.25”H x 12.5”W x 10.75”D
24.625”H x 5”W
CH-ENSX-K-50-460-000000
$6,505.00
60
77
34.25”H x 16.5”W x 11.5”D
32.625”H x 9”W
CH-ENSX-K-60-460-000000
$8,568.00
CH-ENSX-K-75-460-000000
$8,568.00
CH-ENSX-K-100-460-000000
$8,568.00
75
96
34.25”H x 16.5”W x 11.5”D
32.625”H x 9”W
100
124
34.25”H x 16.5”W x 11.5”D
32.625”H x 9”W
125
156
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ENSX-K-125-460-000000
$30,911.00
150
180
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ENSX-K-150-460-000000
$30,911.00
200
240
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ENSX-K-200-460-000000
$30,911.00
250
302
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ENSX-K-250-460-000000
$40,515.00
300
361
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ENSX-K-300-460-000000
$40,515.00
350
414
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ENSX-K-350-460-000000
$40,515.00
477
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ENSX-K-400-460-000000
$40,515.00
400
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
108
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
ENSX-K SERIES: STANDARD OPTIONS
Non-Combination, FVNR, NEMAConfiguration,
Enclosure Ratings: NEMA 7/9 Mfg: Killark
(460V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$187.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$374.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$392.00
2
H-O-A Switch
$307.00
3
ON-OFF Switch
$307.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages. Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
0
1
2
OPTION
CODES
PRICE
ADDER
None
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 25hp
• 30hp – 200hp
• 250hp - 400hp
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 25hp
• 30hp – 200hp
• 250hp - 400hp
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 25 HP)
$125.00
$68.00
$136.00
$444.00
2
120VAC Transformer (30 - 50 HP)
$147.00
3
120VAC Transformer (60 - 100 HP)
$179.00
$136.00
$271.00
$888.00
4
120VAC Transformer (125 - 200 HP)
$200.00
5
120VAC Transformer (250 - 400 HP)
$238.00
$0.00
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
Examples are
are 15HP,
15HP, 460V
Starter in
in a
a NEMA
NEMA 4
4 enclosure
enclosure with
with H-O-A
H-O-A
Examples
V Starter
Switch, 2
2 Terminal
Terminal Blocks,
Blocks, 115VAC
115VAC Contactor
Contactor Coil
Coil &
& CPT
CPT Add
Add prices
prices
Switch,
for options
options to
to price
price for
for Basic
Basic Enclosed
Enclosed Starter.
Starter.
for
two-pole primary fuse block. Fuses are installed in both the primary and
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
CH BASIC
MODEL
HP
VOLTS
ENSX-K
15
460
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
109
ENSX-K SERIES
Non- Combination, FVNR, NEMA Configuration
Enclosure Ratings: NEMA 7/9 Mfg: Killark
1/4 HP - 400 HP (575V)
Standard Features:
• NEMA rated Contactor with Adjustable Thermal Overload (Class10).
• Oversized Control Power Transformer (optional).
• External Machined Flange Joint Design.
• Units are assembled, pre-wired and ready to go straight out of the box.
• Integral Cast Mounting Feet.
• Units come standard with Hinged Covers.
• S.S. 316 Captive Quick Thread Cover Bolts (optional).
• Ground Lug Package.
• Steel mounting pan.
• Enclosures cast from Copper-Free Aluminum – Max 0.25% Copper Content.
• Aluminum, Stainless Steel Shot or Sandblasted Natural Finish.
• Enclosures suitable for NEMA 4X Applications.
• Cast aluminum and Stainless Steel Hinge.
OVERALL
MOUNTING
NEMA
SIZE
HP
HP
0.25*
2
3
4
5
6
OVERALL
MOUNTING
DIMENSIONS
FULL LOAD AMPS @
18.375”H x 5”W
20”H x 12.5”W x 9.125”D
0.64
MOUNTING
OVERALL
575V/3PHASE/60HZ
OVERALL
DIMENSIONS
BASE PART NUMBER
LIST PRICE
BASE
PART NUMBER
LIST PRICE
$3,581.00
CH-ENSX-K-0.25-575-000000
0.9
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-0.5-575-000000
$3,581.00
0.75*
1.3
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-0.75-575-000000
$3,581.00
1*
1.7
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-1-575-000000
$3,581.00
1.5*
2.4
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-1.5-575-000000
$3,581.00
2*
2.7
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-2-575-000000
$3,581.00
3*
3.9
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-3-575-000000
$3,581.00
5*
6.1
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-5-575-000000
$3,581.00
7.5*
9
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-7.5-575-000000
$3,642.00
10*
11
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-10-575-000000
$3,642.00
15
17
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-15-575-000000
$4,045.00
20
22
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-20-575-000000
$4,045.00
25
27
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ENSX-K-25-575-000000
$4,045.00
30
32
26.25”H x 12.5”W x 10.75”D
24.625”H x 5”W
CH-ENSX-K-30-575-000000
$6,505.00
40
41
26.25”H x 12.5”W x 10.75”D
24.625”H x 5”W
CH-ENSX-K-40-575-000000
$6,505.00
50
52
26.25”H x 12.5”W x 10.75”D
24.625”H x 5”W
CH-ENSX-K-50-575-000000
$6,505.00
60
62
34.25”H x 16.5”W x 11.5”D
32.625”H x 9”W
CH-ENSX-K-60-575-000000
$8,565.00
75
77
34.25”H x 16.5”W x 11.5”D
32.625”H x 9”W
CH-ENSX-K-75-575-000000
$8,565.00
100
99
34.25”H x 16.5”W x 11.5”D
32.625”H x 9”W
CH-ENSX-K-100-575-000000
$8,565.00
125
125
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ENSX-K-125-575-000000
$30,911.00
150
144
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ENSX-K-150-575-000000
$30,911.00
200
192
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ENSX-K-200-575-000000
$30,911.00
250
242
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ENSX-K-250-575-000000
$40,515.00
300
289
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ENSX-K-300-575-000000
$40,515.00
350
336
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ENSX-K-350-575-000000
$40,515.00
400
382
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ENSX-K-400-575-000000
$40,515.00
0.5*
1
FULL LOAD AMPS @
* If CPT option is NOT chosen for 0.25 to 15 HP, enclosure overall size will be 18”H X 11”W X 9.125”D (mounting dimensions 16.375”H X 3.625”W) and a
$150 deduction can be taken from the corresponding list price.
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
110
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
ENSX-K SERIES: STANDARD OPTIONS
Non-Combination, FVNR, NEMAConfiguration,
Enclosure Ratings: NEMA 7/9 Mfg: Killark
(575V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$187.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$374.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$392.00
2
H-O-A Switch
$307.00
3
ON-OFF Switch
$307.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages. Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
0
1
2
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 25 HP)
$160.00
None
$0.00
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 25hp
• 30hp – 200hp
• 250hp - 400hp
$68.00
$136.00
$444.00
2
120VAC Transformer (30 - 50 HP)
$193.00
3
120VAC Transformer (60 - 100 HP)
$240.00
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 25hp
• 30hp – 200hp
• 250hp - 400hp
$136.00
$271.00
$888.00
4
120VAC Transformer (125 - 200 HP)
$271.00
5
120VAC Transformer (250 - 400 HP)
$327.00
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
Examples are
are 15HP,
15HP, 575V
Starter in
in a
a NEMA
NEMA 4
4 enclosure
enclosure with
with H-O-A
H-O-A
Examples
V Starter
Switch, 2
2 Terminal
Terminal Blocks,
Blocks, 115VAC
115VAC Contactor
Contactor Coil
Coil &
& CPT
CPT Add
Add prices
prices
Switch,
for options
options to
to price
price for
for Basic
Basic Enclosed
Enclosed Starter.
Starter.
for
two-pole primary fuse block. Fuses are installed in both the primary and
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
CH BASIC
MODEL
HP
VOLTS
ENSX-K
15
575
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
111
CNSX-K SERIES
Explosion Proof FVNR Combination Motor Starters, NEMA 7/9, 1/4 HP – 500 HP
(Enclosure Manufacturer: Hubbell-Killark)
112
NEMA rated Contactor with Adjustable Thermal Overload (Class10). Oversized Control Power Transformer (optional).
External Machined Flange Joint Design. Units are assembled, pre-wired and ready to go straight out of the box. Integral
Cast Mounting Feet. Units come standard with Hinged Covers. S.S. 316 Captive Quick Thread Cover Bolts (optional).
Ground Lug Package. Steel mounting pan. Enclosures cast from Copper-Free Aluminum – Max 0.25% Copper Content.
Aluminum, Stainless Steel Shot or Sandblasted Natural Finish. Enclosures suitable for NEMA 4X Applications. Cast
aluminum and Stainless Steel Hinge. Includes a Molded Case Circuit Breaker and external operating handle.
Technical Data and Specifications
STARTER
Contactor and overload combinations designed
to meet NEMA standards and are extremely rugged.
• Meets or exceeds all NEMA, UL and CSA standards.
• Sizes based on standard NEMA classifications.
• Designed and built for a variety of demanding applications.
• Easy coil change and inspectable/replaceable contacts
• Adjustable/interchangeable heater packs for flexibility.
• Heaters available in ambient compensated and non-ambient
compensated.
ENCLOSURE
Applications
• Designed to enclose electrical and/or electronic equipment and
protect against harsh, industrial environments.
Standards
• UL 508 Type 3R, 4, 12 and 13
• CSA Type 3R, 4, 12 and 13
Complies with:
• NEMA Type 3R, 4, 12 and 13
• IEC 529, IP66
Construction
• Body and cover are formed from 16 gauge steel.
• Smooth, continuously welded seams without knockouts, cutouts,
or holes.
• Formed lip on enclosure to exclude flowing liquids and
contaminants.
• 14 gauge welded brackets provide for enclosure mounting.
• Continuously hinged cover has 304 stainless steel hinges and
provides 180º opening.
• Door latches feature the added safety of quarter turn slot requiring
use of tool for opening.
• Quarter turn latches formed from black zinc diecast.
• Oil resistant gaskets are permanently secured.
• Models larger than 4”x4” include a removable 14 gauge
galvanized inner panel.
Finish
• Cover and enclosure are finished in recoatable smooth ANSI/ASA
61 gray powder coating.
• Inner panels are unpainted galvanized steel, (50-200HP) and
above are painted white.
CONTROL POWER TRANSFORMER
Standards
• Control Power Transformers meet or exceeds the
standards established by UL, CSA, IRC, ANSI, NEMA.
Standard
File No.
VA Size
All Units
UL (ANSI/UL 506)
E50394
All Units
CSA (C22-2 No. 66)
LR3902
All Molded Units
IEC 989
All Units
NEMA (ST-1)
Core & Coils
• High quality, high permeability silicon steel laminations.
• All-welded construction.
• Computer designed copper wound coils with optimum turns ratio.
Finger Safe Terminal Covers
• Finger safe terminal covers for both fused and un-fused terminals, in
a clear, see through finish, are available for all molded transformer
series units.
Standard Secondary Fuse Clips
• Each transformer has a single secondary and comes with a factory
installed secondary fuse kit. (fuses are not included.)
• Accommodates 13/32” x 1-1/2” Midget Fuse.
CIRCUIT BREAKERS
Thermal-Magnetic Circuit Breaker with Non-interchangeable
Trip Units
• 15 –600 Amperes.
• 120, 240, 277, 480Y/277, 600Y/347, 690V AC 50/60Hz, 125,
125/250V DC.
• 1, 2 and 3 poles.
Standards and Certifications
Molded case circuit breakers are designed to conform with
the following standards:
• Underwriters Laboratories, Inc., Standard UL489, Molded Case Circuit
Breakers & Circuit Breaker Enclosures.
• National Electrical Manufacturers Association Standard Publication
No. AB1-1993, Molded Case Circuit Breakers.
• Australian Standard AS 2184, Molded Case Circuit Breakers.
• British Standards Institution Standard BS 4752: Part 1,Switchgear &
Control Gear Part 1: Circuit Breakers.
• Canadian Standards Association Standard C22.2 No. 5, Service
Entrance & Branch Circuit Breakers.
• International Electrotechnical Commission Recommendations IEC 157-1,
Circuit Breakers.
• Japanese T-Mark Standard Molded Case Circuit Breakers.
• South African Bureau of Standards, Standard SABS 156, Standard
Specification for Molded Case Circuit Breakers.
• Swiss Electro-Technical Association Standard SEV 157-1, Safety
Regulations for Circuit Breakers.
• Union Technique de l’Electricite Switchgear & Control Gear Circuit
Breaker Requirements.
• Verband Deutscher Elektrotechniker (Association of German Electrical
Engineers) Standard VDE 0660, Low Voltage Switchgear & Control Gear,
CBs. Conformance with these standards satisfies most local and
international codes, assuming user acceptability and simplified
application.
Innovation
New innovative design allows higher MCP-Starter combination interrupting
ratings.
Operator
Door mounted, front rotary operating handle allows for external operation
of the interior mounted motor circuit protector. The unit is pad-lockable
and includes a door interlock mechanism. Available in NEMA 1, 3R, 12
and 4/4X ratings to cover a wide array of applications and environments.
Molded case circuit breakers equal or exceed Federal Specification
Classification W-C 475b requirements for the particular class associated
with the circuit breaker frame being considered.
PUSH BUTTONS
Standards: IEC/EN 60947-5-1, VDE 0660,
NFC63140, UL 508, UL 50, CENELEC EN50007
Degree of Protection: IP66 (IEC/EN60529)
UL Ratings: Type 1,2,3,3R,3S,4,4X,5,12,12K e 13
Contacts Resistance: ≤ 25mΩ (IEC/EN 60255)
Electrical Shock Protection: Class II
Temperature Range: -25ºC to 70ºC
Vibration Resistance (IEC/EN 6068-2-6): 16g with frequency
range from 40 to 500HZ and max shifting 0.75mm (peak-to-peak)
FUSES
• Time Delay, Rejection Type Fast Acting; Branch Circuit Fuse
Class CC, Class CC- Rejection Feature
Voltage Rating: 600 Volts AC or Less
Interrupting Rating: 200,000A RMS Sym
Agency Approvals: Std. 248-4, Class CC, UL Listed, Guide JDDZ,
File E4273, CSA Certified, Class 1422-01, File 53787
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
Technical Drawing
CNSX-K SERIES
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
113
CNSX-K SERIES
Combination, FVNR, NEMA Configuration
Enclosure Ratings: NEMA 7/9 Mfg: Killark
1/4 HP - 100 HP (230V)
Standard Features:
• NEMA rated Contactor with Adjustable Thermal Overload (Class10).
• Oversized Control Power Transformer (optional).
• External Machined Flange Joint Design.
• Units are assembled, pre-wired and ready to go straight out of the box.
• Integral Cast Mounting Feet.
• Units come standard with Hinged Covers.
• S.S. 316 Captive Quick Thread Cover Bolts (optional).
• Ground Lug Package.
• Steel mounting pan.
• Enclosures cast from Copper-Free Aluminum – Max 0.25% Copper Content.
• Aluminum, Stainless Steel Shot or Sandblasted Natural Finish.
• Enclosures suitable for NEMA 4X Applications.
• Cast aluminum and Stainless Steel Hinge.
• Includes a Molded Case Circuit Breaker and external operating handle.
OVERALL
MOUNTING
NEMA
SIZE
1
2
3
4
5
FULL LOAD AMPS @
230V/3PHASE/60HZ
OVERALL
DIMENSIONS
0.5
2.2
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CNSX-K-0.5-230-000000
$4,001.00
0.75
3.2
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CNSX-K-0.75-230-000000
$4,001.00
1
4.2
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CNSX-K-1-230-000000
$4,001.00
1.5
6.0
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CNSX-K-1.5-230-000000
$4,001.00
2
6.8
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CNSX-K-2-230-000000
$4,001.00
3
9.6
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CNSX-K-3-230-000000
$4,001.00
5
15.2
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CNSX-K-5-230-000000
$4,063.00
7.5
22
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CNSX-K-7.5-230-000000
$4,063.00
10
28
25.5”H x 14.5”W x 9.125”D
21.875”H x 7”W
CH-CNSX-K-10-230-000000
$5,343.00
15
42
25.5”H x 14.5”W x 9.125”D
21.875”H x 7”W
CH-CNSX-K-15-230-000000
$5,343.00
20
54
27.25”H x 17.875”W x 11”D
25.625”H x 10.375”W
CH-CNSX-K-20-230-000000
$10,004.00
25
68
27.25”H x 17.875”W x 11”D
25.625”H x 10.375”W
CH-CNSX-K-25-230-000000
$10,004.00
30
80
27.25”H x 17.875”W x 11”D
25.625”H x 10.375”W
CH-CNSX-K-30-230-000000
$10,004.00
40
104
34.25”H x 21.5”W x 11.875”D
32.625”H x 14”W
CH-CNSX-K-40-230-000000
$13,672.00
50
130
34.25”H x 21.5”W x 11.875”D
32.625”H x 14”W
CH-CNSX-K-50-230-000000
$13,672.00
60
154
62.25”H x 20.25”W x 15”D
43.5”H x 18.5”W
CH-CNSX-K-60-230-000000
$25,860.00
75
192
62.25”H x 20.25”W x 15”D
43.5”H x 18.5”W
CH-CNSX-K-75-230-000000
$25,860.00
100
248
62.25”H x 20.25”W x 15”D
43.5”H x 18.5”W
CH-CNSX-K-100-230-000000
$27,634.00
HP
HP
0.25
OVERALL
MOUNTING
DIMENSIONS
FULL LOAD AMPS @
21.375”H x 7”W
23”H x 14.5”W
x 9.125”D
1.4
MOUNTING
OVERALL
BASE PART NUMBER
LIST PRICE
BASE
PART NUMBER
LIST PRICE
$4,001.00
CH-CNSX-K-0.25-230-000000
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
114
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
CNSX-K SERIES: STANDARD OPTIONS
Combination, FVNR, NEMA Configuration,
Enclosure Ratings: NEMA 7/9 Mfg: Killark
(230V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$187.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$374.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$392.00
2
H-O-A Switch
$307.00
3
ON-OFF Switch
$307.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages. Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 7.5 HP)
$125.00
0
None
$0.00
1
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 15hp
• 20hp – 100hp
$68.00
2
120VAC Transformer (10 - 15 HP)
$147.00
$136.00
3
120VAC Transformer (20 - 30 HP)
$179.00
2
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 15hp
• 20hp – 100hp
$136.00
4
120VAC Transformer (40 - 50 HP)
$200.00
$271.00
5
120VAC Transformer (60 - 100 HP)
$238.00
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
Examples are
are 15HP,
15HP, 230V
Starter in
in a
a NEMA
NEMA 4
4 enclosure
enclosure with
with H-O-A
H-O-A
Examples
V Starter
Switch, 2
2 Terminal
Terminal Blocks,
Blocks, 115VAC
115VAC Contactor
Contactor Coil
Coil &
& CPT
CPT Add
Add prices
prices
Switch,
for options
options to
to price
price for
for Basic
Basic Enclosed
Enclosed Starter.
Starter.
for
two-pole primary fuse block. Fuses are installed in both the primary and
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
CH BASIC
MODEL
HP
VOLTS
ENSX-K
15
230
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
115
CNSX-K SERIES
Combination, FVNR, NEMA Configuration
Enclosure Ratings: NEMA 7/9 Mfg: Killark
1/4 HP - 200 HP (460V)
Standard Features:
• NEMA rated Contactor with Adjustable Thermal Overload (Class10).
• Oversized Control Power Transformer (optional).
• External Machined Flange Joint Design.
• Units are assembled, pre-wired and ready to go straight out of the box.
• Integral Cast Mounting Feet.
• Units come standard with Hinged Covers.
• S.S. 316 Captive Quick Thread Cover Bolts (optional).
• Ground Lug Package.
• Steel mounting pan.
• Enclosures cast from Copper-Free Aluminum – Max 0.25% Copper Content.
• Aluminum, Stainless Steel Shot or Sandblasted Natural Finish.
• Enclosures suitable for NEMA 4X Applications.
• Cast aluminum and Stainless Steel Hinge.
• Includes a Molded Case Circuit Breaker and external operating handle.
OVERALL
MOUNTING
NEMA
SIZE
HP
HP
0.25
2
3
4
5
OVERALL
DIMENSIONS
OVERALL
MOUNTING
DIMENSIONS
FULL LOAD AMPS @
21.375”H x 7”W
23”H x 14.5”W x 9.125”D
0.7
MOUNTING
OVERALL
OVERALL
BASE PART NUMBER
LIST PRICE
BASE
PART NUMBER
LIST PRICE
$4,001.00
CH-CNSX-K-0.25-460-000000
1.1
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CNSX-K-0.5-460-000000
$4,001.00
0.75
1.6
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CNSX-K-0.75-460-000000
$4,001.00
1
2.1
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CNSX-K-1-460-000000
$4,001.00
1.5
3
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CNSX-K-1.5-460-000000
$4,001.00
2
3.4
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CNSX-K-2-460-000000
$4,001.00
3
4.8
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CNSX-K-3-460-000000
$4,001.00
5
7.6
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CNSX-K-5-460-000000
$4,001.00
7.5
11
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CNSX-K-7.5-460-000000
$4,063.00
10
14
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CNSX-K-10-460-000000
$4,063.00
15
21
25.5”H x 14.5”W x 9.125”D
21.875”H x 7”W
CH-CNSX-K-15-460-000000
$5,232.00
20
27
25.5”H x 14.5”W x 9.125”D
21.875”H x 7”W
CH-CNSX-K-20-460-000000
$5,343.00
25
34
25.5”H x 14.5”W x 9.125”D
21.875”H x 7”W
CH-CNSX-K-25-460-000000
$5,343.00
30
40
27.25”H x 17.875”W x 11”D
25.625”H x 10.375”W
CH-CNSX-K-30-460-000000
$9,657.00
40
52
27.25”H x 17.875”W x 11”D
25.625”H x 10.375”W
CH-CNSX-K-40-460-000000
$9,657.00
50
65
27.25”H x 17.875”W x 11”D
25.625”H x 10.375”W
CH-CNSX-K-50-460-000000
$10,004.00
60
77
34.25”H x 21.5”W x 11.875”D
32.625”H x 14”W
CH-CNSX-K-60-460-000000
$13,300.00
75
96
34.25”H x 21.5”W x 11.875”D
32.625”H x 14”W
CH-CNSX-K-75-460-000000
$13,672.00
100
124
34.25”H x 21.5”W x 11.875”D
32.625”H x 14”W
CH-CNSX-K-100-460-000000
$13,672.00
125
156
62.25”H x 20.25”W x 15”D
43.5”H x 18.5”W
CH-CNSX-K-125-460-000000
$25,860.00
150
180
62.25”H x 20.25”W x 15”D
43.5”H x 18.5”W
CH-CNSX-K-150-460-000000
$25,860.00
200
240
62.25”H x 20.25”W x 15”D
43.5”H x 18.5”W
CH-CNSX-K-200-460-000000
$27,634.00
0.5
1
FULL LOAD AMPS @
460V/3PHASE/60HZ
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
116
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
CNSX-K SERIES: STANDARD OPTIONS
Non-Combination, FVNR, NEMA Configuration,
Enclosure Ratings: NEMA 7/9 Mfg: Killark
(460V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$187.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$374.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$392.00
2
H-O-A Switch
$307.00
3
ON-OFF Switch
$307.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages. Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 10 HP)
$125.00
0
None
$0.00
$68.00
2
120VAC Transformer (15 - 25 HP)
1
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 25hp
• 30hp – 200hp
$147.00
$136.00
3
120VAC Transformer (30 - 50 HP)
$179.00
2
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 25hp
• 30hp – 200hp
$136.00
4
120VAC Transformer (60 - 100 HP)
$200.00
$271.00
5
120VAC Transformer (125 - 200 HP)
$238.00
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
two-pole primary fuse block. Fuses are installed in both the primary and
Examples are 15HP, 460 V Starter in a NEMA 4 enclosure with H-O-A
Switch, 2 Terminal Blocks, 115VAC Contactor Coil & CPT Add prices
for options to price for Basic Enclosed Starter.
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
CH BASIC
MODEL
HP
VOLTS
CNSX-K
15
460
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
117
CNSX-K SERIES
Combination, FVNR, NEMA Configuration
Enclosure Ratings: NEMA 7/9 Mfg: Killark
1/4 HP - 200 HP (575V)
Standard Features:
• NEMA rated Contactor with Adjustable Thermal Overload (Class10).
• Oversized Control Power Transformer (optional).
• External Machined Flange Joint Design.
• Units are assembled, pre-wired and ready to go straight out of the box.
• Integral Cast Mounting Feet.
• Units come standard with Hinged Covers.
• S.S. 316 Captive Quick Thread Cover Bolts (optional).
• Ground Lug Package.
• Steel mounting pan.
• Enclosures cast from Copper-Free Aluminum – Max 0.25% Copper Content.
• Aluminum, Stainless Steel Shot or Sandblasted Natural Finish.
• Enclosures suitable for NEMA 4X Applications.
• Cast aluminum and Stainless Steel Hinge.
• Includes a Molded Case Circuit Breaker and external operating handle.
OVERALL
MOUNTING
NEMA
SIZE
HP
HP
0.25
2
3
4
5
OVERALL
MOUNTING
DIMENSIONS
FULL LOAD AMPS @
21.375”H x 7”W
23”H x 14.5”W x 9.125”D
0.64
MOUNTING
OVERALL
575V/3PHASE/60HZ
OVERALL
DIMENSIONS
BASE PART NUMBER
LIST PRICE
BASECH-CNSX-K-0.25-575-000000
PART NUMBER
LIST PRICE
$4,001.00
0.9
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CNSX-K-0.5-575-000000
$4,001.00
0.75
1.3
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CNSX-K-0.75-575-000000
$4,001.00
1
1.7
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CNSX-K-1-575-000000
$4,001.00
1.5
2.4
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CNSX-K-1.5-575-000000
$4,001.00
2
2.7
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CNSX-K-2-575-000000
$4,001.00
3
3.9
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CNSX-K-3-575-000000
$4,001.00
5
6.1
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CNSX-K-5-575-000000
$4,001.00
7.5
9
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CNSX-K-7.5-575-000000
$4,063.00
10
11
23”H x 14.5”W x 9.125”D
21.375”H x 7”W
CH-CNSX-K-10-575-000000
$4,063.00
15
17
25.5”H x 14.5”W x 9.125”D
21.875”H x 7”W
CH-CNSX-K-15-575-000000
$5,232.00
20
22
25.5”H x 14.5”W x 9.125”D
21.875”H x 7”W
CH-CNSX-K-20-575-000000
$5,233.00
25
27
25.5”H x 14.5”W x 9.125”D
21.875”H x 7”W
CH-CNSX-K-25-575-000000
$5,343.00
30
32
27.25”H x 17.875”W x 11”D
25.625”H x 10.375”W
CH-CNSX-K-30-575-000000
$9,657.00
40
41
27.25”H x 17.875”W x 11”D
25.625”H x 10.375”W
CH-CNSX-K-40-575-000000
$9,657.00
50
52
27.25”H x 17.875”W x 11”D
25.625”H x 10.375”W
CH-CNSX-K-50-575-000000
$9,657.00
60
62
34.25”H x 21.5”W x 11.875”D
32.625”H x 14”W
CH-CNSX-K-60-575-000000
$13,300.00
0.5
1
FULL LOAD AMPS @
75
77
34.25”H x 21.5”W x 11.875”D
32.625”H x 14”W
CH-CNSX-K-75-575-000000
$13,300.00
100
99
34.25”H x 21.5”W x 11.875”D
32.625”H x 14”W
CH-CNSX-K-100-575-000000
$13,672.00
125
125
62.25”H x 20.25”W x 15”D
43.5”H x 18.5”W
CH-CNSX-K-125-575-000000
$25,628.00
150
144
62.25”H x 20.25”W x 15”D
43.5”H x 18.5”W
CH-CNSX-K-150-575-000000
$25,860.00
200
192
62.25”H x 20.25”W x 15”D
43.5”H x 18.5”W
CH-CNSX-K-200-575-000000
$25,860.00
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
118
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
CNSX-K SERIES: STANDARD OPTIONS
Combination, FVNR, NEMA Configuration,
Enclosure Ratings: NEMA 7/9 Mfg: Killark
(575V)
OPTION A
OPTION D
Terminals for External Connections
Indicator Light, for connection across contactor coil
OPTION
CODES
PRICE
ADDER
OPTION
CODES
PRICE
ADDER
0
None
$0.00
0
None
$0.00
1
“Run” (Red) Indicator Light – Front Panel
$187.00
2
Adds 2 Terminal Blocks
$6.00
2
“Run” (Red) & “Stop” (Green)
Indicator Lights
$374.00
4
Adds 4 Terminal Blocks
$8.00
6
Adds 6 Terminal Blocks
$10.00
Indicator Lights are 22.5mm with a chrome bezel ring. They are LED
style bulbs which give them a longer life span than most conventional bulbs.
Terminal blocks are mounted on din-rail and include end stops and anchor.
Indicator Lights come standard with a metal nameplate with inscription.
If custom terminal block labeling is needed, please specify at the time of order.
Terminal blocks are standard feed-through style blocks.
OPTION B
OPTION E
Front Panel Operators
OPTION
CODES
115VAC Contactor Coil for Remote Operation
PRICE
ADDER
0
None
$0.00
1
Start-Stop Pushbuttons
$392.00
2
H-O-A Switch
$307.00
3
ON-OFF Switch
$307.00
OPTION
CODES
PRICE
ADDER
0
None
$0.00
1
(Coil supplied for incoming line voltage)
Contactor supplied with 115VAC coil
$0.00
Please call Cordyne for coil voltages. Contactor coils can be easily changed in
the field.
Start-Stop Pushbuttons are 22.5mm with a chrome bezel ring. H-O-A
(Hands-Off-Auto) Switches are 22.5mm and are three position maintained.
OPTION F
ON-OFF Switches are two position, 22.5mm, lever style with chrome bezel.
115VAC, CPT (Control Power Transformer)
Primary & Secondary Fuse Block and fuses are included.
OPTION C
Extra Auxiliary Contacts
OPTION
CODES
OPTION
CODES
PRICE
ADDER
PRICE
ADDER
0
No Transformer
$0.00
1
120VAC Transformer (0.25 - 10 HP)
$160.00
0
None
$0.00
1
Adds 1 N.O. & 1 N. C. Aux Contact
• 0.25hp - 25hp
• 30hp – 200hp
$68.00
2
120VAC Transformer (15 - 25 HP)
$193.00
$136.00
3
120VAC Transformer (30 - 50 HP)
$240.00
2
Adds 2 N.O. & 2 N. C. Aux Contacts (MAX)
• 0.25hp - 25hp
• 30hp – 200hp
$136.00
4
120VAC Transformer (60 - 100 HP)
$271.00
$271.00
5
120VAC Transformer (125 - 200 HP)
$327.00
Auxiliary contacts are stackable and mount to the side of the contactor
Control Power Transformers come standard with secondary fuse clip and a
(left or right side).
Examples are
are 15HP,
15HP, 575V
Starter in
in a
a NEMA
NEMA 4
4 enclosure
enclosure with
with H-O-A
H-O-A
Examples
V Starter
Switch, 2
2 Terminal
Terminal Blocks,
Blocks, 115VAC
115VAC Contactor
Contactor Coil
Coil &
& CPT
CPT Add
Add prices
prices
Switch,
for options
options to
to price
price for
for Basic
Basic Enclosed
Enclosed Starter.
Starter.
for
two-pole primary fuse block. Fuses are installed in both the primary and
secondary of the transformers.
To Order:
• Specify model number, horsepower, voltage & options.
• Add prices of base part number and options.
• Call Cordyne at 1-800-324-1484 or 713-460-5151,
Monday through Friday From 7:00 AM to 5:00 PM CST.
• Discounts available for quantity purchases.
Note: Option code entries may end at last option, but please
do not leave any blank spaces between selected options.
Use a “0” to omit an option.
Option Code Examples:
PARTS
MANUFACTURER
CH BASIC
MODEL
ENSX-K
HP
VOLTS
15
575
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
OPTION CODES
A B C D E F
0 2 0 2 1 1
119
CORDYNE CAPABILITIES
120
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
QUOTE/ORDER FORM
Please Complete All Fields Below
BILLING INFORMATION
SHIPPING INFORMATION
Company:
Company:
Address:
Address:
City:
City:
State:
Zip Code:
State:
Zip Code:
Contact:
Contact:
Phone No.:
Phone No.:
Fax No.:
Fax No.:
E-mail Address:
E-mail Address:
Purchase Order No:
Delivery Date:
Ship Via:
ORDER DESCRIPTION:
OPTIONS
HP
VA
A B C D E F
ES4 0.75
230
1 3 0 1 0 1
NO. QTY. MFG. SRS.
EX
2
CH
DESCRIPTION
TOTAL
Call our sales staff with your order information toll free at 1-800-324-1484/local 713-460-5151 or
Fax the order form to 713-460-5186. Order ONLINE at www.store.cordyne.com
Qty: Quantity
Manufacturers:
Eaton/Cutler-Hammer (CH)
Mfg: Manufacturer
HP: Horse Power General Electric (GE)
WEG Electric (WG)
Sprecher+Schuh (SS)
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
121
TERMS & CONDITIONS OF SALE
1.
Entire Agreement: This document, together with any additional writings signed by Cordyne Industrial Controls (“CORDYNE, INC.”) pertaining to the goods (“Goods”) described on the face hereof, constitutes the entire agreement (“Agreement”) between CORDYNE, INC. and the customer named on the face hereof (“Buyer”) with respect
to the Goods and supersedes all prior written or oral understandings relating to the sale of the Goods by CORDYNE, INC. to Buyer. The Agreement formed hereby may not
be modified, supplemented, waived, canceled, or changed in any way (whether by oral testimony, Buyer’s purchase order or course of dealing) except by a written instrument
signed by Buyer and a corporate officer of CORDYNE, INC. CORDYNE, INC.’s agreement to sell the Goods to Buyer covered by this Agreement is expressly made conditional
on Buyer’s assent to all of the terms and conditions in this Agreement and Buyer’s assent is conclusively established by Buyer’s execution of this Agreement or by acceptance
of any goods provided under this Agreement. In the event Buyer offers to purchase from CORDYNE, INC. the Goods covered by this Agreement and CORDYNE, INC.’s acceptance, through this document, states terms additional to or different from those offered by Buyer, CORDYNE, INC.’s acceptance is expressly made conditional on Buyer’s
assent to the additional and different terms contained in this document.
2. Applicable Law: The Agreement formed hereby is made under and shall be construed and interpreted in accordance with the laws of the State of Texas. Any cause of action
arising under or related to the Agreement in any way shall be brought in Harris County, Texas. Buyer hereby submits to the jurisdiction of the State and Federal courts in the
State of Texas and hereby designates the Secretary of State for the State of Texas as authorized agent to accept service of any and all process on behalf of Buyer in the State
of Texas and in connection with this Agreement.
3. Quotations and Prices: All quotations, offers and prices are merely estimates. THE PRICE FOR THE GOODS COVERED BY THIS AGREEMENT SHALL BE CORDYNE, INC.’s PRICE IN EFFECT AT THE DATE OF DELIVERY. All quotations, offers and prices are F.O.B. CORDYNE, INC.’s plant unless otherwise noted. Buyer shall be
responsible for all federal, state and local taxes (except income taxes of CORDYNE, INC.) applicable to the sale of Goods whether in effect on the date of this Agreement or
subsequently increased, enacted, or levied, irrespective of whether such taxes are quoted on the face hereof. In the even the law specifically provides that such payment must
be made by CORDYNE, INC., Buyer agrees to promptly reimburse CORDYNE, INC. for the amount of such tax. Transportation charges, custom duties, insurance charges,
consular fees and other similar charges are not included in quotations or selling prices and shall be borne by Buyer.
4. Delivery: ALL DELIVERY DATES GIVEN ARE APPROXIMATE. It is recognized & agreed that delivery dates may vary, depending on differences with workmen, local labor
shortages, fire, flood, or other casualty, government regulations or requirements, shortages of raw materials, supplies, fuel, power or transportation, breakdown of equipment,
quality control checks, & numerous other causes. Moreover, it is agreed that CORDYNE, INC. shall have the right to apportion or allocate its production among its customers,
or to assign priorities to accepted orders, in such a manner as CORDYNE, INC. may consider to be equitable. As a result, it is agreed that IN NO EVENT SHALL CORDYNE,
INC. BE RESPONSIBLE FOR OR LIABLE TO BUYER OR TO ANY THIRD PARTY FOR DAMAGES OR LOSSES OF ANY KIND WHATSOEVER, WHETHER DIRECT, INCIDENTAL, CONSEQUENTIAL OR OTHERWISE, SUSTAINED ON ACCOUNT OF CORDYNE, INC.’s FAILURE TO MEET DELIVERY DATES FOR ANY REASON. CORDYNE,
INC. reserves the right to invoice & Buyer agrees to pay for any or all finished material or Goods ready for delivery when delivery is held up pursuant to Buyer’s instructions or
for reason beyond CORDYNE, INC.’s control. All sales are F.O.B. CORDYNE, INC.’s plant unless otherwise noted. In the event Buyer wishes for CORDYNE, INC. to ship the
Goods to Buyer and CORDYNE, INC. so agrees, CORDYNE, INC. shall ship the Goods to Buyer (at Buyer’s expense) at the agreed shipping address by any commercially
reasonable means. CORDYNE, INC. shall have the option of selecting the particular route and carrier for the shipment of Goods to Buyer.
5. Risk of Loss: The risk of loss with respect to the Goods (including transportation delays and losses) shall pass to Buyer upon delivery of the Goods by CORDYNE, INC. to the
Buyer or to a carrier for transportation to Buyer. After delivering the Goods or providing the services to Buyer, CORDYNE, INC. shall not be liable for and Buyer assumes all
liability & responsibility for all death or injury to persons or injury or damage to property resulting from the handling, possession or use of the Goods. No loss, injury or destruction of the Goods subsequent to their delivery to Buyer shall release Buyer from any obligation with respect to the Goods, including without limitation, the obligation to pay for
the Goods. No Goods may be returned for credit or adjustment without written permission from CORDYNE, INC.’s home office. No shipments are insured by CORDYNE, INC.
against damage or loss in transit.
6. Inspection: Buyer shall, as its sole expense, inspect the Goods prior to taking delivery FOB CORDYNE, INC.’s plant, or, in the case that CORDYNE, INC. and Buyer have
agreed that CORDYNE, INC. shall ship the Goods to Buyer, prior to CORDYNE, INC.’s delivery of the Goods to the Carrier. If Buyer refuses or fails to actually inspect the
Goods as required in the preceding sentence, Buyer will nevertheless be deemed to have inspected the Goods upon delivery of the Goods by CORDYNE, INC. to Buyer or to
Carrier for delivery to Buyer. Within fifteen (15) days after Buyer inspects the Goods or is deemed to have inspected the Goods, Buyer shall determine if Buyer will accept or
reject the goods. Buyer agrees that rejection of the Goods may be affected ONLY for defects or non-conformities (including shortages) substantially impairing the value of the
Goods, and Buyer’s sole remedy for lesser defects or non-conformities shall be that specified in the Limited Express Warranty of Quality provided below.
7. Payment Terms: Unless otherwise provided on the face hereof or on the invoice as submitted by CORDYNE, INC. to Buyer, Buyer shall pay for the Goods in cash in United
States dollars thirty (30) days net from date of invoice. However, if otherwise provided on the face hereof or on the invoices submitted by CORDYNE, INC. to Buyer, then Buyer
agrees to pay for the Goods as specified on the face hereof or in such invoices. All past due accounts shall bear interest at the rate of one and one-half (1½%) percent per
month from due date until paid. CORDYNE, INC.’s right to charge interest under this provision is in addition to its rights and remedies under this Agreement and under the laws
to terminate and recover damages. Buyer shall also pay all collection costs, including attorney’s fees, incurred by CORDYNE, INC. in collecting past due accounts.
8. Security Interest: Buyer grants to CORDYNE, INC. as security for the payment of all sums owing and to be owing by Buyer to CORDYNE, INC., including without limitation, the sums owing and to be owing under this Agreement, a security interest in all Goods and in all equipment with respect to which the services are rendered under this
Agreement and the proceeds and products thereof pursuant to the Texas Business and Commerce Code. Buyer agrees that in the event of any default in the payment of any
such sums owing or to be owing by Buyer to CORDYNE, INC., CORDYNE, INC. shall have and is hereby granted (without limitation of other rights and remedies to which
CORDYNE, INC. may be entitled under the applicable law and under the Agreement) all the rights and remedies of a secured party under the Texas Business and Commerce
Code. Buyer agrees to execute and deliver to CORDYNE, INC. such financing statements as CORDYNE, INC. deems necessary or appropriate and to take such additional actions as CORDYNE, INC. may request to effect, maintain or realize upon such security interest. In this connection, Buyer appoints CORDYNE, INC. as its agent to execute any
financial statements, drafts or other documents on behalf of Buyer which CORDYNE, INC. believes to be necessary or appropriate to perfect, maintain or realize upon such
security interest. This agency shall be considered as coupled with an interest and irrevocable. CORDYNE, INC. shall retain wherever the Goods may be found, with or without
judicial process, and charge Buyer with any deficiencies sustained by CORDYNE, INC.
9. Insurance: In the event the Buyer does not pay for the Goods in cash at the time the Goods are delivered to Buyer, Buyer shall obtain, at its own expense, insurance in the
amount of the outstanding indebtedness owed by Buyer to CORDYNE, INC. for the Goods, insuring the Goods against all risks of loss or damage. Proof of such insurance
shall be provided in writing to CORDYNE, INC. CORDYNE, INC. shall be named as the loss payee on such policy for the amounts as its interests may appear. The policy shall
provide that it may not be canceled without the insurer providing CORDYNE, INC. then (10) days written notice of intent to cancel.
10. Limited Warranty: CORDYNE, INC. warrants that on the date of delivery and for one (1) year thereafter, the Goods shall be free of defects in CORDYNE, INC.’s materials
and workmanship and shall meet the additional express written statement of quality, if any, made by CORDYNE, INC. in connection with the sale of Goods and signed by an
officer of CORDYNE, INC. This Limited Express Warranty of Quality shall apply only in favor of Buyer and is not transferable and shall be subject to the following limitations:
(a) The Limited Express Warranty of Quality shall not apply (1) to Goods which have been used or rebuilt (whether by CORDYNE, INC. or by any other entity), or (2) to Goods
not manufactured entirely by CORDYNE, INC. (however, CORDYNE, INC. shall assign to Buyer, to the extent the same is assignable, whatever warranty CORDYNE, INC. has
received from the manufacturer of such Goods), or (3) to Goods which have been altered by any person or entity other than CORDYNE, INC. in any way so as in CORDYNE,
INC.’s judgment to affect the stability, reliability, or performance of the Goods, or (4) to Goods which have been used other than in the service and within the pressure range for
which they were manufactured, or (5) to Goods which have been misused or which have been damaged due to the unreasonable use, negligence or accident of Buyer or any
other entity or (6) to Goods which have been unreasonably used by Buyer or any other entity after Buyer or such entity knew or should have known of the defect in the Goods.
Any advisory services and/or recommendations provided by CORDYNE, INC. with respect to the Goods and their uses are not warranted. Any reference by CORDYNE, INC.
to Buyer’s specifications and similar requirements are made only to describe the Goods in general, and no warranties or other terms therein shall have any force or effect.
Catalogs, circulars or similar pamhplets of CORDYNE, INC. are for general information purposes only and shall not be deemed to constitute express written statements of
quality. (b) CORDYNE, INC. warrants that is has title to the Goods sold hereunder; however, CORDYNE, INC. expressly disclaims any express or implied warranty that the
Goods shall be free from infringement of any United States or foreign Letters Patent or other industrial rights except as follows: CORDYNE, INC. warrants that the use or sale
of the Goods sold to Buyer hereunder will not infringe the existing and valid claims of any United States Letters Patent of others covering such Goods. CORDYNE, INC. does
not warrant that such Goods will be free from infringement of any United States or foreign Letters Patent when the Goods were not manufactured by or for CORDYNE, INC., or
were specially made in whole or in part, to the Buyer’s design specifications and such infringement arises from the inclusion of such specified design. CORDYNE, INC. does
not warrant that the Goods, if used for sale or in combination with other material or apparatus, or if used in the practice or the process will not, as a result of such combination
or use, will be free from infringement from any United States or foreign Letters Patent or industrial right covering such combination or process. This limited express warranty of
title shall apply ONLY in favor of Buyer.
122
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
TERMS & CONDITIONS OF SALE
11. Express Written: OTHER THAN THE EXPRESS WRITTEN STATEMENTS OF QUALITY AND TITLE MADE IN PARAGRAPH 10 ABOVE, ALL EXPRESS WARRANTIES
THAT MIGHT ARISE FROM REPRESENTATIVES BY CORDYNE, INC. WITH RESPECT TO THE SALE OF GOODS OR FROM ENGINEERING DRAWINGS, SAMPLES,
MODELS, OR ACTIONS OF CORDYNE, INC. ARE EXPRESSLY DISCLAIMED AND NEGATE.
12. Implied Warranties: ALL IMPLIED WARRANTIES EXISTING UNDER THE LAW WITH RESPECT TO THE SALE OF GOODS HEREUNDER ARE HEREBY EXPRESSLY
DISCLAIMED AND NEGATED PARTICULARY, CORDYNE, INC. HEREBY NEGATES AND DISCLAIMS THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE
IMPLIED WARRANTY FOR FITNESS FOR A PARTICULAR PURPOSE.
13. Liability: IN ADDITION, ALL OTHER LIABILITY THAT MAY ARISE WITH RESPECT TO THE SALE OF GOODS EITHER IN CONTRACT OR TORT, INCLUDING WITHOUT
LIMITATION, STRICT LIABILITY AND LIABILITY BASED UPON THE NEGLIGENCE OR CORDYNE, INC. ARE EXPRESSLY DISCLAIMED AND DEGATED.
14. Buyer’s Remedy for Failure of Goods to Comply with Warranty: After acceptance of the Goods, Buyer’s sole remedy & CORDYNE, INC.’s sole liability for any failure of
the Goods to conform with Limited Express Warranty of quality or for any breach by CORDYNE, INC. for any obligation pertaining to the quality of the Goods (even if such nonconformity results from the negligence of CORDYNE, INC.), shall be limited to the following, provided the Goods or equipment have been installed and operated under proper
conditions connected to its rated load & written notice is given to CORDYNE, INC. by Buyer immediately when the Goods or equipment are found to be non-conforming so
that an CORDYNE, INC. representative may be present to inspect the equipment or Goods when they are dismantled: (a) Repair or replacement of the Goods at CORDYNE,
INC.’s plant (whichever CORDYNE, INC. shall elect & F.O.B. CORDYNE, INC.’s plant) whereby the Goods comply with the Limited Express Warranty of Quality. Any goods or
parts thereof that are repaired or replaced by CORDYNE, INC. pursuant to this paragraph shall be warranted as their date of delivery in accordance with the terms and conditions of this Agreement.
15. Remedies: THE REMEDIES PROVIDED HEREIN SHALL BE THE SOLE AND EXCLUSIVE REMEDY OF BUYER FOR CORDYNE, INC.’s BREACH OF WARRANTIES
OR FOR ANY BREACH OF ANY CONTRACTUAL OR LEGAL DUTY OR OBLIGATION ARISING OUT OF THE SALE OF THE GOODS BY CORDYNE, INC. TO BUYER.
CORDYNE, INC. SHALL NOT UNDER ANY CIRCUMSTANCES BE RESPONSIBLE OR LIABLE TO BUYER OR TO ANY USER OR TO ANY THIRD PARTY FOR ANY
ECONOMIC LOSS, PHYSICAL HARM, INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES (INCLUDING WITHOUT LIMITATION DOWNTIME, LOSS OF PROFITS
AND/OR LOSS OF BUSINESS OPPORTUNITIES) ARISING FROM ANY DEFECT IN THE GOODS OR SERVICES OR ANY FAILURE OF THE GOODS OR SERVICES TO
CONFORM WITH THE WARRANTIES MADE HEREIN OR ANY FAILURE OF CORDYNE, INC. TO MEET ANY OBLIGATION OR DUTY EXISTING AND APPLICABLE UNDER THE LAW WITH RESPECT TO THE SALE OF THE GOODS TO BUYER, WHETHER SUCH DEFECT IN GOODS OR FAILURE OF THE GOODS TO CONFORM WITH
THE WARRANTY OR FAILURE OF CORDYNE, INC. TO MEET ITS OBLIGATIONS OR DUTIES RESULT IN DAMAGE OR HARM ONLY TO THE GOODS OR TO OTHER
PROPERTY.
16. Officers: No employee or representative of CORDYNE, INC., other than its officers, is authorized to change the warranties or the remedies in any way or to grant any other
warranty or any other remedies.
17. Indemnification: Except to the extent such obligation is inconsistent with CORDYNE, INC.’s obligation to Buyer under the terms of the Limited Express Warranties stated
above, Buyer agrees to DEFEND, INDEMNIFY AND HOLD CORDYNE, INC. HARMLESS from and against any and all claims, liabilities, loss, cost (including without limitation,
the cost of litigation and attorney’s fees) and expense made against or incurred by CORDYNE, INC. on account of death or bodily injury to persons or injury to property or
loss, damage or expense, which relates to or results from, or is in any way attributable to the use or operation of the Goods or any device, material or thing which the Goods
are made a part or to which the Goods are attached or within which the Goods are enclosed (while in Buyer’s possession or subsequent to any transfer of possession to any
other entity) or which related to or results from, or is in any way attributable to, the services provided by CORDYNE, INC. to Buyer hereunder. Buyer’s obligation to defend and
indemnify and hold CORDYNE, INC. harmless shall apply and be fully enforceable, IRRESPECTIVE OF WHETHER SUCH DEATH OR BODILY INJURY TO PERSONS OR
INJURY TO PROPERTY OR LOSS, DAMAGE OR EXPENSES IS CAUSED BY OR RESULTS FROM THE SOLE OR CONCURRENT NEGLIGENCE OR OTHER FAULT OF
CORDYNE, INC. OR ANY AGENT OR EMPLOYEE OF CORDYNE, INC. OR ANY INDEPENDENT CONTRACTOR WHO IS DIRECTLY RESPONSIBLE TO CORDYNE, INC.
18. Claims: Buyer agrees that CORDYNE, INC. shall have the sole and exclusive right to any claims for drawback filed with the U.S. Customs Office with regard to Buyer’s order.
To that end, Buyer agrees to assist CORDYNE, INC. in any way in collecting on any such claim.
19. Invalidity/Validity: All terms contained herein are separable and the invalidity of any part hereof shall not affect the validity of any other part.
20. Performance: The rights and remedies herein reserved to CORDYNE, INC. shall be cumulative and in addition to other rights and remedies provided by law. The failure of
CORDYNE, INC. to insist upon strict performance hereof in any one instance shall not constitute a release of its right to require such performance in the future with respect to
such incidence or with respect to any later breach of Agreement by Buyer.
21. Buyer’s Rights: Buyer’s rights and obligations under the Agreement may not be assigned or transferred without the express written consent of CORDYNE, INC.
22. Waiver of Consumer Rights (DTPA Waiver): BUYER HAS KNOWLEDGE AND EXPERIENCE IN FINANCIAL AND BUSINESS MATTERS THAT ENABLE BUYER TO
EVALUATE THE MERIT AND RISKS OF THE TRANSACTION CONTEMPLATED HEREBY. BUYER IS NOT IN A DESPARATE BARGAINING POSITION VIS-À-VIS CORDYNE, INC., AND BUYER HEREBY WAIVES TO THE MAXIMUM EXTENT PERMITTED BY LAW, ANY AND ALL RIGHTS, BENEFITS AND REMEDIES UNDER THE TEXAS
DECEPTIVE TRADE PRACTICES-CONSUMER PROTECTION ACT SET FORTH IN SAID CHAPTER E OF CHAPTER 17 OF THE TEXAS BUSINESS AND COMMERCE
CODE A LAW THAT GIVES CONSUMERS SPECIAL RIGHTS AND PROTECTIONS, WITH RESPECT TO ANY MATTERS PERTAINING TO THIS CONTRACT AND THE
TRANSACTIONS CONTEMPLATED HEREBY, AFTER CONSULTATION WITH AN ATTORNEY AT BUYER’S OWN SELECTION, BUYER VOLUNTARILY CONSENTS TO
THIS WAIVER.
23. Rental Equipment: All above terms and conditions apply to rental equipment with the additional terms: (a) Buyer shall carry adequate insurance against all hazards on the
equipment; (b) Buyer shall maintain equipment properly and furnish all fuel and expendable items; and (c) Buyer shall return the equipment in good operating condition at the
end of the rental contract.
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.
123
124
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC.
All Rights Reserved.