PS7111-2A
PS7111L-2A
D
8 PIN DIP SOLID STATE RELAY
DESCRIPTION
• 2 CHANNEL TYPE:
(1a + 1a output)
PS7111-2A and PS7111L-2A are solid state relays containing
GaAs LEDs on the light emitting side (input side) and MOSFETs
on the (output side). They are suitable for analog signal control
because of their low offset and high linearity.
UE
FEATURES
• DESIGNED FOR AC/DC SWITCHING LINE CHANGER
• SMALL PACKAGE:
8 pin DIP
• LOW OFFSET VOLTAGE
• SURFACE MOUNT TYPE LEAD:
PS7111L-2A
APPLICATIONS
• LOW LED OPERATING CURRENT:
IF = 2 mA
IN
• EXCHANGE EQUIPMENT
• MEASUREMENT EQUIPMENT
• FA/OA EQUIPMENT
NT
ELECTRICAL CHARACTERISTICS (TA = 25 °C)
PART NUMBER
MOS
Diode
FET
SYMBOLS
PS7111-2A, PS7111L-2A
UNITS
VF
Forward Voltage, IF = 10 mA
V
IR
Reverse Current, VR = 5 V
µA
ILOFF
Off-State Leakage Current, VD = 100 V
COUT
Output Capacitance, VD = 0 V, f = 1 MHz
LED On-state Current, IL = 100 mA
SC
O
IFon
Coupled
PARAMETERS
RON1
On-State Resistance, IF = 10 mA, IL = 10 mA
RON2
On-State Resistance, IF = 10 mA, IL = 100 mA, t≤10 ms
tON
tOFF
Turn-on Time1
Turn-off Time1
RI-O
Isolation Resistance, VI-O = 1.0 kVCC
CI-O
Isolation Capacitance, V = 0 V, f = 1 MHz
IF = 10 mA, VL = 5 V, RL = 500 Ω, PW ≥ 10 ms
MIN
TYP
MAX
1.2
1.4
5.0
µA
0.03
pF/ch
57
1.0
mA
2.0
Ω
3.0
6.0
ms
0.1
0.03
0.4
0.2
Ω
109
pF/ch
1.1
Note:
1. Test Circuit for Switching Time
PS7111-2A, PS7111L-2A
8
7
6
5
1
2
3
4
IF
Pulse Input
DI
VL
Input Monitor
Rin
VO Monitor
RL
Input
50%
0
VO = 5 V
90%
Output
10%
ton
toff
California Eastern Laboratories
PS7111-2A, PS7111L-2A
ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C)
UNITS
RATINGS
mA
V
mW/ch
A
50
5.0
50
1
V
mA
mA
100
100
300
PART NUMBER
Break Down Voltage
Continuous Load Current
Pulse Load Current3
(AC/DC Connection)
Power Dissipation
SYMBOLS
PARAMETERS
IF
LED Operating Current
VF
LED Off Voltage
UNITS
mA
V
MIN TYP MAX
2
10
20
0
0.5
ORDERING INFORMATION
PART NUMBER
PS7111-2A
PACKAGE
PACKING STYLE
8 pin DIP
Magazine case 50 pcs
PS7111L-2A
mW/ch
PS7111-2A,PS7111L-2A
D
Forward Current (DC)
Reverse Voltage
Power Dissipation
Peak Foward Current2
UE
PD
Coupled
BV
PT
TA
TSTG
PARAMETERS
375
PS7111L-2A-E3
Embossed Tape 1000 pcs/reel
PS7111L-2A-E4
Isolation Voltage4
Total Power Dissipation
Operating Ambient Temp.
Storage Temperature
V
mW
°C
°C
1500
850
-40 to +80
-40 to +100
NT
Notes:
1. Operation in excess of any one of these parameters may result
in permanent damage.
2. PW = 100 µs, Duty Cycle = 1 %
3. PW = 100 ms, 1 shot.
4. AC voltage for 1 minute at TA = 25 °C, RH = 60 % between
input and output.
IN
SYMBOLS
Diode
IF
VR
PD
IFP
MOSFET
VL
IL
ILP
RECOMMENDED OPERATING
CONDITIONS (TA = 25°C)
OUTLINE DIMENSIONS (Units in mm)
PS7111-2A
PS7111L-2A
TOP VIEW
7
6
1
2
3
3.5±0.3
4.15±0.3
7.62
6.5±0.5
5
TOP VIEW
9.25±0.5
4
8
7
6
5
1
2
3
4
6.5±0.5
3.5±0.3
8
SC
O
9.25±0.5
+0.10
0.10 -0.05
1.34±0.1
2.54
0.9±0.25
9.60±0.4
3.3±0.3
DI
1.34 ± 0.10
2.54
0.25 M
0.50 ± 0.10
0 to 15 ˚
1.
2.
3.
4.
5.
6.
7.
8.
LED Anode
LED Cathode
LED Anode
LED Cathode
MOSFET
MOSFET
MOSFET
MOSFET
1.
2.
3.
4.
5.
6.
7.
8.
LED Anode
LED Cathode
LED Anode
LED Cathode
MOSFET
MOSFET
MOSFET
MOSFET
PS7111-2A, PS7111L-2A
TYPICAL PERFORMANCE CURVES (TA = 25 °C)
MAXIMUM FORWARD CURRENT
vs. AMBIENT TEMPERATURE
MAXIMUM LOAD CURRENT
vs. AMBIENT TEMPERATURE
60
40
20
0
-25
0
25
50
75 80
100
50
0
-25
0
25
50
80
75
IN
FORWARD VOLTAGE vs.
AMBIENT TEMPERATURE
100
OUTPUT CAPACITANCE
vs. SUPPLY VOLTAGE
1.6
250
NT
1.4
IF = 50 mA
30 mA
20 mA
10 mA
1.2
5 mA
1.0
1 mA
SC
O
Forward Voltage, VF (V)
100
Ambient Temperature, TA (°C)
Ambient Temperature, TA (°C)
0.8
-25
0
25
50
75
150
100
50
0
100
0.5
0
-25
0
25
80
100
20
15
10
5
50
75
Ambient Temperature, TA (°C)
100
120
n = 50 pcs
IF = 10 mA
IL = 10 mA
25
Number (pcs)
DI
1.0
60
ON-STATE DISTRIBUTION
Normalized to 1.0
at TA = 25°C,
IF = 10 mA,
IL = 10 mA
1.5
40
30
3.0
2.0
20
Supply Voltage, VCC (V)
NORMALIZED ON-STATE RESISTANCE
vs. AMBIENT TEMPERATURE
2.5
f = 1 MHz
200
Ambient Temperature, TA (°C)
Normalized On-State Resistance, RON
D
80
UE
Maximum Load Current, IL (mA)
150
Output Capacitance, (pF)
Maximum Forward Current, IF (mA)
100
0
2.8
2.9
3.0
On-State Resistance, Ron (Ω)
PS7111-2A, PS7111L-2A
TYPICAL PERFORMANCE CURVES (TA = 25 °C)
OFF-STATE LEAKAGE CURRENT
vs. SUPPLY VOLTAGE
LOAD CURRENT vs. LOAD VOLTAGE
IF = 10 mA
10
10
10
10
-5
TA = 80 °C
-6
-7
TA = 25 °C
-8
-9
20
40
60
80
100
120
-0.5
-0.25
0
0.25
0.5
-50
Load Voltage, VL (V)
IN
Supply Voltage, VCC (V)
TURN-OFF TIME vs.
FORWARD CURRENT
TURN-ON TIME vs.
FORWARD CURRENT
8.0
0.5
Turn-off Time, tOFF (ms)
IF = 10 mA
VL = 5 V
RL = 500 Ω
NT
6.0
4.0
2.0
SC
O
Turn-on Time, tON (ms)
50
-100
0
0
10
20
30
IF = 10 mA
VL = 5 V
RL = 500 Ω
0.4
0.3
0.2
0.1
0
40
10
20
30
Forward Current, IF (mA)
Forward Current, IF (mA)
TURN-ON TIME DISTRIBUTION
TURN-OFF TIME DISTRIBUTION
30
30
n = 50 pcs
IF = 10 mA
VO = 5 V
20
DI
15
10
5
20
15
10
5
0
0.05
n = 50 pcs
IF = 10 mA
VO = 5 V
25
Number (pcs)
25
Number (pcs)
D
10
100
UE
10
-4
Load Current, IL (mA)
Off-State Leakage Current, ILOFF (A)
10-3
0
0.10
0.315
Turn-on Time, tON (ms)
0.02
0.06
Turn-off Time, tOFF (ms)
40
PS7111-2A, PS7111L-2A
TYPICAL PERFORMANCE CURVES (TA = 25 °C)
NORMALIZED TURN-ON TIME
vs. AMBIENT TEMPERATURE
NORMALIZED TURN-OFF TIME
vs. AMBIENT TEMPERATURE
3.0
2.0
1.0
0.5
0
25
50
75
1.55 ± 0.1
10.7 ± 0.1
0
25
50
75
100
IN
NT
OUTLINE AND DIMENSIONS (REEL)
2.0 ± 0.5
φ13.0 ± 0.5
10.3 ± 0.1
16.0 ± 0.3
4.3 ± 0.2
SC
O
7.5 ± 0.1
1.75 ± 0.1
OUTLINE AND DIMENSIONS (TAPE)
4.0 ± 0.1
0.5
Ambient Temperature, TA (°C)
TAPING SPECIFICATIONS (Units in mm)
1.55 ± 0.1
1.0
0.0
-25
100
Ambient Temperature, TA (°C)
2.0 ± 0.1
1.5
R 1.0
φ80.0 ± 5.0
0.0
-25
2.0
UE
1.5
2.5
φ330
2.5
Normalized to 1.0
at TA = 25 °C
IF = 10 mA
VL = 5 V
RL = 500 Ω
D
Normalized to 1.0
at TA = 25 °C
IF = 10 mA
VL = 5 V
RL = 500 Ω
Normalized Turn-off Time, tOFF
Normalized Turn-on Time, tON
3.0
φ21.0 ± 0.8
0.3
12.0 ± 0.1
TAPING DIRECTION
DI
PS7111L-2A-E3
PS7111L-2A-E4
+2.0
16.4- 0.0
Packaging : 1000 pcs/reel
PS7111-2A, PS7111L-2A
RECOMMENDED SOLDERING CONDITIONS
235 °C or below (package surface temperature)
30 seconds or less
Two
Rosin flux containing small amount of chlorine
(The flux with a maximum chlorine content of 0.2 Wt % is recommended.)
UE
(heating)
to 10 s
235 ˚C (peak temperature)
210 ˚C
to 30 s
100 to 160 ˚C
60 to 120 s
(preheating)
IN
Package Surface Temperature T (˚C)
Recommended Temperature Profile of Infrared Reflow
D
(1) Infrared reflow soldering
• Peak reflow temperature
• Time of temperature higher than 210 °C
• Number of reflows
• Flux
(2) Dip soldering
• Temperature
• Time
• Number of times
• Flux
NT
Time (s)
260 °C or below (molten solder temperature)
10 seconds or less
One
Rosin flux containing small amount of chlorine
(The flux with a maximum chlorine content of 0.2 Wt % is recommended.)
DI
SC
O
(3) Cautions
• Fluxes
Avoid removing the residual flux with freon-based cleaning solvent.
EXCLUSIVE NORTH AMERICAN AGENT FOR
RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS
CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279
24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM
07/27/2001
DATA SUBJECT TO CHANGE WITHOUT NOTICE