even under the toughest conditions. PRODUCT HIGHLIGHTS n 18 ports including 2 flexible Gigabit combo ports that can be RJ45 copper or fiber optic SLX-18MG-1 Industrial Ethernet Switch n High port count in a small footprint PRODUCT DATASHEET Sixnet Networking Series Easy to configure management functions n Truly rugged design with -40 to 75°C operation SLX-18MG-1 PRODUCT DATASH SLX-18M n REAL-TIME SECURE PERFORMANCE Managed 18-Port Industrial Ethernet Switch Real-Time-Ring™ or Rapid Spanning Tree (RSTP) Two Flexible Combination Gigabit Ports 18 PORT INDUSTRIAL ETHERNET MANAGED SWITCH for fast redundant ring orETHERNET mesh networks 18 PORT INDUSTRIAL MANAGED SWITCH Your choice – Just connect to the RJ45 for a n n SNMPv1 and v2 network management 10/100/1000Mbps auto-detecting copper link or plug in a fiber transceiver formanaged a 100 or 1000Mbps noise-immune The SLX-18MG isfor ansecurity 18 port industrial Ethernet SNMPv3 authentication & encryption fiber link. These advanced ports give you the flexibility The SLX-18MG is an 18 port industrial Ethernet managed switch with fast combination ports n SNMP notifications (traps) for 16 report on and event 2 Gigabit you need and make your jobthat easier! switch with 16 fast and 2 Gigabit support combination ports operation that n Priority Queuing both copper and fiber optic connections. This (QoS/CoS) for real-time n support both copper n and optic connections. IGMPfiber for Multicast filtering switch is (snooping designed& querying) toThis be rugged, reliable, real-time and VLAN for convenient traffic segregation switch is designed ton be rugged, reliable, real-timecompact and DIN rail packaging, protected secure. It combines n Broadcast & multicast storm protection circuitry and powerful software to keep your system going secure. It combines compact DIN rail packaging, protected n RMON & port mirroring for advanced diagnostics even your undersystem the toughest circuitry and powerful software to keep goingconditions. n Security with HTTPS, SSL, SSH, SNMPv3 & more even under the toughest conditions. PRODUCT HIGHLIGHTS n Easy configuration via Web, Telnet or CLI n Free field-installable upgrades forever2 flexible Gigabit combo ports n firmware 18 ports including PRODUCT HIGHLIGHTS n that TROUBLE FREE OPERATION can be RJ45 copper or fiber optic 18 ports including 2 flexible Gigabit combo ports n -40 to +75 °C operating n High rangeport count in a small footprint that can be RJ45 copper or fiber optic n UL/CSA (CUL), CE and Hazloc (Zone 2) rated 18 PORT INDUSTRIAL ETHERNET SWITCH n TrulyMANAGED rugged design with -40 to 75°C operation n High port count in(PENDING) a small footprint n n Easy to Dual (redundant) power inputs ETHERNET PERFORMANCE n Truly rugged design n SLX-18MG-1 configure management functions with -40 to 75°C operation Industrial surge and spike protection STANDARDS COMPLIANCE n Electrical safety – UL508 / CSA C22.2/14; EN61010-1, CE REAL-TIME SECURE PERFORMANCE 18 Ethernet ports including 2 Gigabit n Self-test/alarm outputfunctions contact Easy to configure management n EMC – FCC part 15, ICES-003; EN61000-6-4, EN61000-6-2, CE Managed, store & forward, wire-speed n Real-Time-Ring™ or Rapid Spanning Tree (RSTP) n DIN rail or direct panel mounting n Hazardous locations Two Flexible Combination Gigabit Ports n All IEEE 802.3 Ethernet – UL1604 / CSA C22.2/213 (Class I, Div. 2); protocols supported for fast redundant ring or mesh networks REAL-TIME SECURE PERFORMANCE choice Just connect to the RJ45 fo EN60079-15 (Zone 2,Your Category 3), CE–(ATEX) n RJ45 ports 1 - 16 (shielded) 10/100BaseTX n SNMPv1 and v2 network management n n RJ45 ports 17 - 18SOLUTIONS for marine and offshore per ABS 10/100/1000Mbps auto-detecting copper link or plu (shielded) 10/100/1000BaseTX FOR YOUR INDUSTRIAL NETWORKING Real-Time-Ring™ or Rapid Spanning Tree (RSTP) CHALLENGESn Maritime – designed WWW.SIXNET.COM Two Flexible Combination Gigabit Ports for a 100 or 1000Mbps noise-imm n RoHS n RJ45 port speed auto-negotiation and WEEE compliant a fiber transceiver SNMPv3 authentication & encryption for security for fast redundant ring or meshnnetworks n ISO9001:2000 Your choice – Just certified connect to These the advanced RJ45 forports a give you the flexi n RJ45 MDI/MDIX auto-crossover company fiber link. n SNMP notifications (traps) for report on event n n RJ45 SNMPv1 v2 network management you need and make your job easier! TD andand RD auto-polarity 10/100/1000Mbps auto-detecting copper link or plug in PHYSICAL n Ports 17 and 18 are combination gigabit thatQueuing have both(QoS/CoS) a RJ45 n ports Priority fortransceiver real-time operation a fiber a 100 1000Mbps noise-immune n DIN rail or for n SNMPv3 authentication & encryption for security direct panelor mounting connector and SFP fiber connector. For each of these ports, only one fiber link. These advanced ports give you the flexibility n Case n IGMP for Multicast filtering (snooping – Corrosion-resistant aluminum & querying) n ofSNMP the connectors can be used at afor time. notifications (traps) report on event n and you need make your job easier! Ingress protection – IP40 n VLAN transceivers for convenient traffic segregation n SFP (pluggable) ports 17 - 18 accept mini-GBIC n Weight – 0.34 kg (12 oz.) n Priority Queuing (QoS/CoS) for real-time operation n Fiber optic port speed: 100 Mbps or 1000 Mbps n Broadcast & multicast storm protection n Dimensions – see mechanical diagram n n Fiber typical specs (see separate datasheet for details) IGMP for Multicast filtering (snooping & querying) n RMON & port mirroring for advanced diagnostics All specifications are subject to change. Consult factory for latest info. p Multimode, 0.55 km, 850 nm, 50-62.5/125 µm for convenient traffic n pVLAN Singlemode, 10 km, 1310 nm,segregation 9-10/125 µm with HTTPS, SSL, SSH, SNMPv3 & more n Security MECHANICAL DRAWING n p Long haul, up to 120 km, 1550 nm, 9-10/125 µm Broadcast & multicast storm protection n Easy configuration via Web, Telnet or CLI 4.30" n Typical latency (varies on load & settings) n Free diagnostics port16 mirroring fortime advanced field-installable firmware upgrades forever[10.92 cm] n pRMON @ 10 & Mbps: us + frame p @ 100 Mbps: 5 us + frame time n Security with HTTPS, SSL, SSH, SNMPv3 & more TROUBLE FREE OPERATION Snaps to n Full or half duplex operation configurable per port standard Removable n n MAC Easy configuration via8192 Web, Telnet ortoCLI addresses supported n -40 +75 °C operating range DIN Rail Screw Block n Memory bandwidth 32 Gbps EN50022 n UL/CSAforever n Free field-installable firmware upgrades (CUL), CE and Hazloc (Zone 2) rated (35 mm) n Ethernet isolation 1500 VRMS 1 minute (PENDING) n Console ports – USB and RS232 (RJ45) n n n TROUBLE FREE OPERATION ETHERNET COMPLIANCE n n n Dual (redundant) power inputs 5.52" cm] -40 to +75 °C operating range n newer Industrial surge and spike [14.02 protection IEEE 802.3u (Fast Ethernet 100Mbps for devices) Removable DIN clip for direct panel mounting IEEE 802.3 (10Mbps supports devices) UL/CSA (CUL), Ethernet CE and Hazloc (Zone 2) rated nlegacy Self-test/alarm output contact IEEE 802.3x (Full-Duplex with Flow Control) (PENDING) n DIN rail or direct panel mounting n IEEE 802.1D/w (Rapid Spanning Tree for redundant rings and Panel mounting ears n Spanning Dual (redundant) power inputs Tree for interoperability) accept up to a #12 screw n IEEE 802.1p (Priority Queuing – QoS, CoS, ToS/DS) n Industrial surge and spike protection SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES n IEEE 802.1Q (VLAN for traffic segregation) nn 6.02" [15.29 cm] n Self-test/alarm output contact REAL-TIME-RING™ 4.69" [11.92 cm] n nn n n DINloss railrecovery: or direct mounting Link 30panel mS plus 5 mS per hop Switches in a ring: <50 for best performance Multiple rings supported (configurable) See the User Manual for a More Detailed Diagram ORDERING GUIDE SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES “OK” ALARM OUTPUT SLX-18MG-1 n n n Indicates power & operational status Voltage same as switch input voltage Maximum current output 0.5 Amp POWER INPUT n n Redundant input terminals Reverse polarity protection WWW.SIXNET.C 2.88" [7.31 cm] WWW.SIXNET.COM 18 port industrial Ethernet switch GMFIBER-SFP-500 Gigabit SFP fiber transceiver, mm, 550 m GMFIBER-SFP-2K Gigabit SFP fiber transceiver, mm, 2 km GSFIBER-SFP-10K Gigabit SFP fiber transceiver, sm, 10 km GSFIBER-SFP-30K Gigabit SFP fiber transceiver, sm, 30 km Electrical safety – UL508 / CSA C22.2/14; EN61010-1, CE 18 Ethernet ports including 2 Gigabit GSFIB n Input –power all portsEN61000-6-4, active) n EMC FCC (typical part 15,with ICES-003; EN61000-6-2, CE Managed, store & forward, wire-speed GSFIB p n Hazardous 8 W (w/locations no fiber plugged in) / CSA C22.2/213 (Class I, Div. 2); n All IEEE 802.3 Ethernet protocols supported – UL1604 p 10 W (w/(Zone 2 fiber2,plugged in)3), CE (ATEX) EN60079-15 Category n RJ45 ports 1 - 16 (shielded) 10/100BaseTX FMFIB n Maritime n n RJ45 ports 17 - 18 (shielded) 10/100/1000BaseTX – designed for marine Power input voltage 10-30 VDC and offshore per ABS FSFIB n RoHS n n RJ45 port speed auto-negotiation andprotection WEEE compliant Transient 15,000 watts peak 18 PORT INDUSTRIAL ETHERNET MANAGED SWITCH SLX-18MG-1 n n RJ45 MDI/MDIX auto-crossover company n ISO9001:2000 FSFIB Spike protectioncertified 5,000 watts (10x for 10 uS) n RJ45 TD and RD auto-polarity PHYSICAL STANDARDS COMPLIANCE ETHERNET PERFORMANCE ENVIRONMENTAL FSFIB n Ports 17 and 18 are combination gigabit ports that have both a RJ45 n DIN rail – orUL508 direct panel mounting n Electrical n 18 Ethernet ports including 2 Gigabit safety / CSA C22.2/14; EN61010-1, CE n Operating temperature: connector and SFP fiber connector. For each of these ports, only one n Case – Corrosion-resistant aluminum n EMC n Managed, store – FCC partto15, ICES-003; EN61000-6-2, CE p forward, wire-speed -40 +75 °C (cold EN61000-6-4, startup at -40 °C) of the&connectors can be used at a time. n Ingress protection – IP40 ET-PSn Hazardous n All IEEE n802.3 locations – UL1604 / CSA C22.2/213 (Class I, Div. 2); n Storage protocols supported temperature -40 to +85 °C SFPEthernet (pluggable) ports 17 - 18 accept mini-GBIC transceivers n Weight – 0.34 kg (12 oz.) EN60079-15 (Zone 2, Category 3), CE (ATEX) n RJ45 ports n SP-ETH n 1 16 (shielded) 10/100BaseTX Humidity (non-condensing) 5 to 95% RH Fiber optic port speed: 100 Mbps or 1000 Mbps n Dimensions – see mechanical diagram n Maritime n RJ45 ports – designed for marine andisoffshore per ABS n 17 - 18 (shielded) (optional conformal coating available) Fiber typical specs 10/100/1000BaseTX (see separate datasheet for details) n RoHS All specifications subject change. Consult speed p n RJ45 port WEEEare compliant n and Multimode, 0.55 km, 850 nm, 50-62.5/125 µm auto-negotiation Vibration and shock:toIEC60068-2-6, -27factory for latest info. 18 PORT ETHERNET MANAGED SWITCH SLX-18MG-1 RJ45-D n ISO9001:2000 p INDUSTRIAL n RJ45 MDI/MDIX certified company Singlemode, 10 km, 1310 nm, 9-10/125 µm n Maximum auto-crossover Operating Altitude: 30,000 ft. MECHANICAL DRAWING p RDLong haul, up to 120 km, 1550 nm, 9-10/125 µm n RJ45 TD and auto-polarity NOTE: C PHYSICAL 4.30" STANDARDS COMPLIANCE (varies gigabit on load ports & settings) ETHERNET PERFORMANCE n Ports 17 nandTypical 18 arelatency combination that have both a RJ45 n DIN rail or direct panel [10.92 cm] mounting p @ 10 Mbps: 16 us +2 frame time n Electrical safety – UL508 / CSA C22.2/14; EN61010-1, CE n 18and connector SFP fiber connector. For each of these ports, only one Ethernet ports including Gigabit n Case – Corrosion-resistant aluminum p @ 100 Mbps: 5 us + frame time 331 Ushers Road • Ballston Lake, CE NY 12019 • USA n EMC – FCC part 15, ICES-003; EN61000-6-4, EN61000-6-2, of then connectors can be&used at a time. Managed, store forward, wire-speed Snaps to n Ingress protection – IP40 • Fax +1.518.877.8346 • n Full or half duplex operation configurable per port n Hazardous n SFPn(pluggable) locationsRemovable –+1.518.877.5173 UL1604 / CSA C22.2/213 (Class I, Div. 2); sales@s ports 17 - 18 accept mini-GBIC transceivers All IEEE 802.3 Ethernet protocols supported standard n Weight – 0.34 kg (12 oz.) n MAC addresses supported 8192 DIN Rail n Fibern optic EN60079-15 (Zone 2, Category 3), CE (ATEX) port speed: 100(shielded) Mbps or 1000 Mbps RJ45 ports 1 - 16 10/100BaseTX Screw Block SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGE n Dimensions n Memory bandwidth 32 Gbps – see mechanical diagram EN50022 n Maritime n Fibern typical – designed for marine and offshore per ABS specs separate datasheet for details) RJ45 ports (see 17 - 18 (shielded) 10/100/1000BaseTX (35 mm) n Ethernet isolation 1500 VRMS 1 minute n RoHS All specifications are subject to change. Consult factory for latest info. p nMultimode, and WEEE compliant 0.55 km,auto-negotiation 850 nm, 50-62.5/125 µm RJ45 port speed n Console ports – USB and RS232 (RJ45) n n SLX-18MG-1 Industrial Switch Specifications n ISO9001:2000 certified company µm MECHANICAL DRAWING 5.52" 6.02" Removable DIN 9-10/125 µm PHYSICAL [14.02 cm] [15.29 cm] clip for direct n 4.30" IEEE 802.3u Ethernet 100Mbps newer n Typical n latency load & settings) Ports 17(varies and 18on(Fast are combination gigabitfor ports thatdevices) have both a RJ45 panel mounting n DIN rail or direct [10.92 cm] panel mounting n IEEE 802.3 (10Mbps Ethernet supports legacy devices) p @ connector 10 Mbps: 16 usSFP + frame and fiber time connector. For each of these ports, only one n Case – Corrosion-resistant aluminum n IEEE 802.3x (Full-Duplex with Flow Control) p @ of 100 Mbps: 5 us + can frame the connectors betime used at a time. n Ingress protection – IP40 n IEEE 802.1D/w (Rapid Spanning Tree for redundant rings and Snaps to n Full or n half Panel mounting ears duplex operation configurable per port SFP (pluggable) ports 17 - 18 accept mini-GBIC transceivers n standard Weight – 0.34 kg (12 oz.) Spanning Tree for interoperability) Removable accept up to n MACn addresses supported 8192 Fiber optic port speed: 100 Mbps or 1000 Mbps DIN Rail n Dimensionsa–Screw Block #12 n IEEE 802.1p (Priority Queuing – QoS, CoS, ToS/DS) seescrew mechanical diagram n Memory n Fiber bandwidth Gbps(see separate datasheet for details) typical32 specs EN50022 n IEEE 802.1Q (VLAN for traffic segregation) 2.88" info. (35 mm) n Ethernet All specifications are subject to change. Consult factory for latest pisolation 1500 VRMS 1 minute Multimode, 0.55 km, 850 nm, 50-62.5/125 µm 4.69" [7.31 cm] REAL-TIME-RING™ n Console pports – USB and 10 RS232 (RJ45) [11.92 cm] Singlemode, km, 1310 nm, 9-10/125 µm MECHANICAL DRAWING pn Link loss recovery: 30 mS 5 mS hop See the User Manual for a More Detailed Diagram Long haul, up to 120 km,plus 1550 nm,per 9-10/125 µm 5.52" 6.02" ETHERNET COMPLIANCE Removable DIN n Switches 4.30" in a(varies ring: <50 for best performance n Typical [14.02 cm] [15.29 cm] latency on load & settings) clip for direct n IEEE 802.3u (Fast Ethernet 100Mbps for newer devices) n Multiple rings supported (configurable) p @ 10 Mbps: 16 us + frame time panel GUIDE mounting[10.92 cm] ORDERING n IEEE 802.3 (10Mbps Ethernet supports legacy devices) p ALARM @ 100OUTPUT Mbps: 5 us + frame time “OK” SLX-18MG-1 18 port industrial Ethernet switch n IEEE 802.3x (Full-Duplex with Flow Control) Snaps to n Full or half duplex operation configurable per port n Indicates power & operational status n IEEE 802.1D/w GMFIBER-SFP-500 Gigabit SFP fiber transceiver, mm, 550 m standard (Rapid Spanning Tree for redundant rings and Panel mounting ears Removable n MAC addresses 8192voltage n Voltage samesupported as switch input DIN Railup to ScrewSFP Blockfiber transceiver, mm, 2 km Spanning Tree for interoperability) accept GMFIBER-SFP-2K Gigabit n Memory bandwidth 32 Gbps n EN50022 current output 0.5 Amp a #12 screw n IEEE 802.1pMaximum (Priority Queuing – QoS, CoS, ToS/DS) (35 mm) n Ethernet isolation 1500 VRMS 1 minute GSFIBER-SFP-10K Gigabit SFP fiber transceiver, sm, 10 km n IEEEPOWER 802.1Q INPUT (VLAN for traffic segregation) 2.88" n Console ports – USB and RS232 (RJ45) 4.69" GSFIBER-SFP-30K Gigabit SFP fiber transceiver, sm, 30 km n Redundant input terminals [7.31 cm] REAL-TIME-RING™ [11.92 cm] 5.52" 6.02" ETHERNET COMPLIANCE n Reverse Removable DIN polarity protection SFP fiber transceiver, n Link loss recovery: 30 mS plus 5 mS per hop [14.02 cm] User Manual [15.29 cm] sm, 50 km SeeGSFIBER-SFP-50K the forGigabit a More Detailed Diagram clip for direct n Input n IEEE power (typical with all ports active)for newer devices) 802.3u (Fast Ethernet 100Mbps n Switches in a ring: <50 for best performance panel mounting GSFIBER-SFP-80K Gigabit SFP fiber transceiver, sm, 80 km p 8 W(10Mbps (w/ no fiberEthernet plugged in) n IEEE 802.3 supports legacy devices) n Multiple rings (configurable) p supported ORDERING GUIDE 10 W (w/ 2 fiber plugged in) n IEEE FMFIBER-SFP-4K 100Mb SFP fiber transceiver, mm, 4 km 802.3x (Full-Duplex with Flow Control) n Power input voltage 10-30 VDC n OUTPUT “OK” ALARM 18 port industrial Ethernet switch IEEE 802.1D/w (Rapid Spanning Tree for redundant rings andSLX-18MG-1 FSFIBER-SFP-30K 100Mb SFP fiber transceiver, sm, 30 km Panel mounting ears n Transient protection 15,000 watts peak Spanning for interoperability) n Indicates accept up to fiber transceiver, mm, 550 m power &Tree operational status GMFIBER-SFP-500 Gigabit SFP n Spike protection 5,000 watts (10x for 10 uS) FSFIBER-SFP-60K 100Mb a #12 screw SFP fiber transceiver, sm, 60 km n IEEE (Priority n Voltage same 802.1p as switch input Queuing voltage – QoS, CoS, ToS/DS) GMFIBER-SFP-2K Gigabit100Mb SFP fiber mm,sm, 2 km n ENVIRONMENTAL FSFIBER-SFP-100 SFP transceiver, fiber transceiver, 1002.88" km IEEE 802.1Q (VLAN for traffic segregation) n Maximum current output 0.5 Amp p p nSinglemode, 10 km, auto-crossover 1310 nm, 9-10/125 RJ45 MDI/MDIX ETHERNET COMPLIANCE n Long haul, to 120 km, 1550 nm, RJ45 TDupand RD auto-polarity 4.69" n Operating temperature: GSFIBER-SFP-10K Gigabit SFP fiber transceiver, sm, 10 km[7.31 cm] ACCESSORIES POWERREAL-TIME-RING™ INPUT [11.92 cm] p -40 to +75 °C (cold startup at -40 °C) n GSFIBER-SFP-30K Gigabit SFPfor fiber transceiver, sm, Diagram 302Akm Link lossterminals recovery: 30 mS plus 5 mS per hop n Redundant See the User Manual a More ET-PS-024-02 Power supply – ACDetailed to 24VDC, n input Storage temperature -40 to +85 °C n Switches in a(non-condensing) ring: <50 for best performance n Reverse polarity protection n SP-ETH-2 Ethernet surge sm, & lightning Humidity 5 to 95% RH GSFIBER-SFP-50K GigabitDual SFPport fiber transceiver, 50 km Multiple rings supported (configurable) n Inputnpower (typical with all portscoating active) protecton for the 10/100 ports only ORDERING GUIDE (optional conformal is available) GSFIBER-SFP-80K Gigabit SFP fiber transceiver, sm, 80 km p 8 ALARM Wn(w/Vibration no OUTPUT fiber plugged in) IEC60068-2-6, -27 and shock: “OK” RJ45-DB9F-CBL Console port cable,Ethernet DB9 to RJ45 SLX-18MG-1 18 port industrial switch p 10 W n (w/ 2 fiber plugged in) Maximum Operating Altitude: 30,000 ft. FMFIBER-SFP-4K 100Mb SFP fiber transceiver, mm, 4 km n Indicates power & operational status GMFIBER-SFP-500 Gigabit SFP fiber transceiver, mm, 550 m n Power input voltage 10-30 VDC NOTE: Contact SIXNET for special or long haul transceivers up to 120 Km. n Voltage same as switch input voltage FSFIBER-SFP-30K 100Mb SFP fiber transceiver, sm, 30 km n Transient protection 15,000 watts peak GMFIBER-SFP-2K Gigabit SFP fiber transceiver, mm, 2 km n Maximum current output 0.5 Amp n Spike protection 5,000 watts (10x for 10 uS) FSFIBER-SFP-60K 100Mb SFP fiber transceiver, sm, 60 km • • GSFIBER-SFP-10K Gigabit SFP fiber transceiver, sm, 10 km 331 Ushers Road Ballston Lake, NY 12019 USA Datasheet SLX-18MG-1 POWER INPUT • sales@sixnet.com 100Mb SFP fiber transceiver, sm, 100 ENVIRONMENTAL FSFIBER-SFP-100 km Rev: 27 Aug, 2009 +1.518.877.5173 • Fax +1.518.877.8346 GSFIBER-SFP-30K Gigabit SFP fiber transceiver, sm, 30 km n Redundant input terminals n Operating temperature: ACCESSORIES FOR YOUR INDUSTRIAL NETWORKING CHALLENGES WWW.SIXNET.COM n SOLUTIONS Reverse polarity protection GSFIBER-SFP-50K Gigabit SFP fiber transceiver, sm, 50 km p -40 to +75 °C (cold startup at -40 °C) n Input power (typical with all ports active) ET-PS-024-02 Power supply – AC to 24VDC, 2A n Storage temperature -40 to +85 °C GSFIBER-SFP-80K Gigabit SFP fiber transceiver, sm, 80 km p 8 W (w/ no fiber plugged in) n Humidity (non-condensing) 5 to 95% RH SP-ETH-2 Dual port Ethernet surge & lightning p 10 W (w/ 2 fiber plugged in) FMFIBER-SFP-4K 100Mb SFP fiber transceiver, protecton for the 10/100 ports only mm, 4 km (optional conformal coating is available) n Power input voltage 10-30 VDC n Vibration and shock: IEC60068-2-6, -27 FSFIBER-SFP-30K 100Mb SFP fiber sm, 30 km RJ45-DB9F-CBL Console port cable, DB9transceiver, to RJ45 n Transient protection 15,000 watts peak n Maximum Operating Altitude: 30,000 ft. Americas As the global experts in communication, monitoring and control for n Spike protection 5,000 watts (10x for 10 uS) FSFIBER-SFP-60K 100Mb SFP fiber transceiver, sm, 60 km industrial automation and or networking, Red Lionuphas been sales@redlion.net NOTE: Contact SIXNET for special long haul transceivers to 120 Km.delivering ENVIRONMENTAL FSFIBER-SFP-100 SFP fiber sm,Ethernet 100 km and innovative solutions for over100Mb forty years. Ourtransceiver, automation, Asia-Pacific cellular M2M technology enables companies worldwide to gain real-time Operating temperature: ACCESSORIES •asia@redlion.net Ushers Road Lake, NY 12019 • USA data visibility that drives productivity. ProductDatasheet brandsSLX-18MG-1 include Red Lion, p -40 to +75331 °C (cold startup at -40Ballston °C) 27 Aug,2A 2009 +1.518.877.5173 • Fax +1.518.877.8346 • sales@sixnet.com ET-PS-024-02 Power supply – AC to Rev: 24VDC, N-Tron and Sixnet. With headquarters in York, Pennsylvania, the company n Storage temperature -40 to +85 °C Europe hasSP-ETH-2 offices across the Americas, Asia-Pacific and Europe. Red Lion is n Humidity Dual port Ethernet surge & lightning 5 to 95%Middle RH SOLUTIONS FOR (non-condensing) YOUR INDUSTRIAL NETWORKING CHALLENGES WWW.SIXNET.COM East protecton for the 10/100 instrumentation ports only part of Spectris plc, the productivity-enhancing and (optional conformal coating is available) Africa w w wn . rVibration edlio n shock: . n e tIEC60068-2-6,europe@redlion.net controls company. For more Console information, visit to www.redlion.net. and -27 RJ45-DB9F-CBL port please cable, DB9 RJ45 n Maximum Operating Altitude: 30,000 ft. ADLD0207 041615 ©2015 Red Lion Controls, Inc. All rights reserved. Red Lion, the Red Lion logo, N-Tron and Sixnet are +1 (717) 767-6511 Connect. Monitor. Control. registered trademarks of Red Lion Controls, Inc. All other company and product names are trademarks of their respective owners. NOTE: Contact SIXNET for special or long haul transceivers up to 120 Km. n