FM481
4 Channel 2.5 GSP Optical sFPDP PMC
Virtex-4 with PowerPC Core
Description:
The FM481 is a high performance four (4) channel optical 2.5 Gbit/s serial Front Panel Data Port (sFPDP) industry standard PMC
board with Pn4 User Definable I/O. The FM481 is designed to be used as an embedded sFPDP board module dedicated to high
performance serial communications that require support of the sFPDP protocol. The FM481 provides four (4) each full-duplex
2.5Gbps LC optical transceivers for support of the embedded sFPDP protocol IP core implemented in the on-board Xilinx Virtex-4
FPGA. Fast on-board memory resources are available to the FPGA which can be used as a “Plug-N-Play” high speed serial
communication processor with the optional ability for customer specific signal process and customization.
 Up to 2.5Gbps per optical transceiver via the Virtex-4’s MGTs
 Up to 230MBytes/s per optical transceiver
 Unidirectional and bi-directional links
 Framing supported: Dataflow Control, PIO per specification, Copy Mode, Copy-Loop mode and CRC
 Fully compliant ANSI/VITA 17.1-2003 SFPDP standard
FPGA
• XC4VFX20 or XC4VFX60 with embedded PowerPC
RISC processor
• FPGA configuration on-board storage
• Optional Off-the-shelf IP cores
• FPGA Firmware Design Services available upon
request
Memory
• 2 x 32M x 16 DDR2 SDRAM
• 128Mbit flash device
PCI interface
• PCI-X 64-bit 133MHz, 3.3V
• PCI-X/PCI 64/32-bit 66MHz, 3.3V
• PCI 64/32-bit 33MHz, 3.3V
• PCI Express - 4 lanes – Special Order
Measured sustained bandwidth
64-bit 133MHz = 760Mbytes/s
64-bit 66MHz = 450Mbytes/s
32-bit 33MHz = 120Mbytes/s
I/O and Front Panel Interface
• Four full-duplex 2.5Gbps LC optical transceivers provide hardware support for Fiber Channel, Gigabit Ethernet, Infiniband and
other fiber optic based communication standard protocol applications.
• PMC connector Pn4 64 user I/Os
Software Support
• FPGA reference design
• Software GUI for card control
• Software utility to program on-board Flash with FPGA configuration data
• Device driver for Windows 2000/XP, Linux and VxWorks-Special Order
• Test /Demonstration Application
• Custom FPGA firmware /Application /Driver /GUI development available upon request, consult factory.
Other Application Examples:
• Real-time DSP functions (e.g. Floating Point FFT, FIR, Polyphase filterbanks, DDC, etc...)
• Data Storage with over 1.2GBytes/s bandwidth to RAID or JBOD
• Embedded processors
• ASIC prototyping
4DSP, Inc · 955 S Virginia, Suite 214, Reno, NV 89502, USA · t. +1 800 816 1751 · sales@4dsp.com
4DSP, BV Ondernemingsweg 66f, 2404HN, Alphen aan den Rijn, Netherlands· t. +31 (0) 172 782 190 · saleseurope@4dsp.com
FM481
4 Channel 2.5 GSP Optical sFPDP PMC
Virtex-4 with PowerPC Core
sFPDP
2.5Gbps
sFPDP
2.5Gbps
sFPDP
2.5Gbps
sFPDP
2.5Gbps
optical
optical
optical
optical
Configuration
circuit and JTAG
LED
DDR2
SDRAM
x4
64Mx16
Flash
128Mbit
DDR2
SDRAM
Local PCI bus
interface
LED
64Mx16
x4
64
Pn1
Pn2
Pn3
Pn4
PCI-X, PCI 133/66/33MHz 64/32-bitUser I/O
Ordering information
ENVIRONMENTAL
LEVEL A
LEVEL B
Operating
Temperature
0°C to 70°C
-40°C to
85°C
Storage
Temperature
-50°C to 125°C
-50°C to
125°C
HumidityOperating
0 to 100% non
condensing
0 to 100%
non
condensing
Storage Humidity
0 to 100%
0 to 100%
2
Example: FM481-60-10-I-CC-X
Virtex-4 FPGA Device
20 = XC4VFX20
Virtex-4
60 = XC4VFX60
Speed Grade
PCI bus type
X = PCI and PCI-X
- STANDARD
E = PCI Express (XMC) - (Consult Factory)
10, 11 or 12
Temperature range
C = Commercial (0oC to +85oC)
I = Industrial (-40oC to +100oC)
Cooling
AC = Convection Cooled - STANDARD
CC = Conduction Cooled (Contact Factory)
2
Vibration Random
0.1 g /Hz
10 – 3kHz
0.1 g /Hz
10 – 3kHz
Shock
30g peak
30g peak
Coating
none
Conformal
Request more information or purchase this module by sending an email to sales@4dsp.com
4DSP, Inc · 955 S Virginia, Suite 214, Reno, NV 89502, USA · t. +1 800 816 1751 · sales@4dsp.com
4DSP, BV Ondernemingsweg 66f, 2404HN, Alphen aan den Rijn, Netherlands· t. +31 (0) 172 782 190 · saleseurope@4dsp.com