Exploration geological
Product catalogue
CONTENTS
Aluminium Sieves
Aluminium Tags
Bag Tying Equipment
Brikasauris
Calico Bags Exploration Quality
Camping Equipment
Cardboard Cartons
Casing Cap - Plastic
Clinometers
Compasses
Core Marking Blocks
Core Orientation
Corewise Core Saws
Diamond Core Saw Blades - tips for optimum use
Diamond Drill Core Diameter
Diamond Saw Blades
Dormer Hand Augers
Dormer Hand Augers Accessories
Down Hole Survey Camera Consumables
Drill Hole Plugs/PVC Collar Cutter/Shot Firing Wire
Dymark Mine Mark Vertical Spray
Dymark Paint Spray and Mark Inverted Spray
Electronic Equipment
Emergency Radio Beacon
Estwing Hand Tools
Field Books
Field Sample Splitter 12.5/87.5
Field Sample Splitter 25/75
Field Sample Splitter 50/50
Flagging Tape
Flexistack Sieves
Garmin 12 Channel GPS Unit
Garmin Accessories
Hand Lenses, Pocket Microscopes
Hand Tools, Picks, Shovels
Impala Plastic Core Trays
Laboratory Sample Splitter 50/50
Leather Field Accessories
Map Measures/Planimeter
Marking Equipment
Measuring Equipment
Minsam Wetstrength Geochem Bags
Miscellaneous
Ore Box Plastic Core Trays
Packaging Tape
Pencil Magnets & Scribers
Pin Flags
Pin Markers
Plastic Bags - Open Top
Plastic Bags - Self Seal
Plastic Panning Dishes
Polywoven Sacks
Premium Explorer Plastic Core Trays
Radios
Issued 30.01.2008 V5
Contents Page 2 of 30
Page No.
9
2
2
15
1
11
2
11
6
7
11
12
14
26
15
14
5
5
13
10
4
4
15
12
6
7
17
18
19
2
8
12
12
7
5
16
20
9
6
3
4
1
8
16
3
6
13
13
1
1
6
1
15
12
CONTENTS
Reflex Down Hole Core Orientation Tool
Reflex Down Hole Electronic "Camera" Tools for Rent and Purchase
Safety Equipment
Sample Bottles and Containers
Sample Chip Trays
Sandvik Core Saws
Sandvik Core Storage Trays CMC
Sandvik Core Tray Storage End Loading Modules
Sandvik Core Tray Storage Side Loading Modules
Sandvik Metal Core Trays
Sandvik Storage Trays - AMC, FMC
Scales
Sieves & Nylon Sieve Mesh
Stapling Equipment
Stereoscopes
Survey Markers
Test Sieves
Ultra Violet Lights
Wooden Survey Stakes
Zinczap
Issued 30.01.2008 V5
Contents Page 3 of 30
Page No.
14
14
11
3
10
14
23
25
24
16
21
10
9
3
8
12
10
7
13
14
PRODUCT CODE
DESCRIPTION
Plastic Bags - Open Top
PLAB0812P
PLAB1015P
PLAB1218P
PLAB1624P
PLAB1830P
PLAB2436P
205mm x 305mm 125um (8” x 12”)
255mm x 380mm x 125um (10” x 15”)
300mm x 450mm x 150 um (12” x 18”)
405mm x 610mm x 150um (16” x 24”)
450mm x 750mm x 150um (18” x 30”)
610mm x 910mm x 150um (24” x 36”)
Plastic Bags – Self Seal
PLAB035SS
PLAB0507SS
PLAB0812SS
PLAB1015SS
75mm x 125mm x 80um (3” x 5”)
125mm x 175mm x 80um (5” x 7”)
200mm x 312mm x 80um (8” x 12”)
250mm x 380mm x 80um (10” x 15”)
Polywoven Sacks
PLAS1828P
PLAS2035P
PLAS2440P
PLAS1828UV
PLAS2035UV
PLAS2440UV
450mm x 700mm (18” x 28”) White
500mm x 875mm (20” x 35”) White
585mm x 990mm (24” x 40”) White
450mm x 700mm (18” x 28”) Yellow UV
500mm x 875mm (20” x 35”) Yellow UV
585mm x 990mm (24” x 40”) Yellow UV
Calico Bags Exploration Quality
CAL0812D/SI
CAL0812S/TI
CAL1014D/S
CAL1014S/TI
CAL1215D/SI
CAL1215S/TI
CAL1218D/SI
CAL1218S/TI
CAL1424S/TI
CAL1830S/TI
CAL2436S/TI
200mm x 300mm (8" x 12") Draw String
200mm x 300mm (8" x 12") Side Tie
250mm x 350mm (10" x 14") Draw String
250mm x 350mm (10" x 14") Side Tie
300mm x 375mm (12" x 15") Draw String
300mm x 375mm (12" x 15") Side Tie
300mm x 450mm (12" x 18") Draw String
300mm x 450mm (12" x 18") Side Tie
350mm x 600mm (14" x 24") Side Tie
450mm x 750mm (18" x 30") Side Tie
600mm x 900mm (24" x 36") Side Tie
Minsam Wetstrength Geochem Bags
WETB053
WETB084
WETB105
Issued 30.01.2008 V5
75mm x 125mm (3” x 5”)
100mm x 200mm (4” x 8”)
125mm x 250mm (5” x 10”)
Page 4 of 30
PRODUCT CODE
DESCRIPTION
Bag Tying Equipment
PATABTT
PATABTTW150
SMCPTIE280
Bag Tying Tool
Tie Wire (Bag tying) 150mm
Cable Tie Plastic 280mm
Cardboard Cartons
PACART1515
PACART1553
PACART1884
PACART192
PACART3644U
380mm x 380mm x 300mm (15” x 15” x 12”)
380mm x 125mm x 80mm (15" x 5" x 3")
450mm x 200mm x 105mm (18” x 8” x 4”)
380mm x 280mm x 215mm (15” x 11” x 9”)
916mm x 102mm x 102mm (36" x 4" x 4")
Flagging Tape
FLA10025B
FLA10025G
FLA10025O
FLA10025R
FLA10025W
FLA10025Y
FLAG10025B
FLAG10025L
FLAG10025O
FLAG10025P
FLAG10025R
FLAG10025Y
FLA10050B
FLA10050G
FLA10050R
FLA10050W
FLA10050Y
FLAG10050P
SUAERIALMW1
100m x 25mm Blue
100m x 25mm Green
100m x 25mm Orange
100m x 25mm Red
100m x 25mm White
100m x 25mm Yellow
100m x 25mm Glow Blue
100m x 25mm Glow Lime
100m x 25mm Glow Orange
100m x 25mm Glow Pink
100m x 25mm Glow Red
100m x 25mm Glow Yellow
100m x 50mm Blue
100m x 50mm Green
100m x 50mm Red
100m x 50mm White
100m x 50mm Yellow
100m x 50mm Glow Pink
Aerial Marking Sheet 1m x 100m x 150um
White
Aluminium Tags
MPERTAGA
MPERTAGAB
Permatags with Ties
Permatags w/out Ties
Alum plates available to order
Issued 30.01.2008 V5
Page 5 of 30
PRODUCT CODE
DESCRIPTION
Marking Equipment
MPENART17B
MPENART19B
MPENART100B
MPENART400B
MPENART400W
17 Artline Pens Black
19 Artline Pens Black
100 Artline Pens Black
400 Artline Pens Black
400 Artline Pens White
MPENINKBL
MPENINKGR
MPENINKRE
MPENINKYE
20lt Water Soluble Ink Blue
20lt Water Soluble Ink Green
20lt Water Soluble Ink Red
20lt Water Soluble Ink Yellow
Sample Bottles & Containers
SMBOTP250
SMBOTP500
SMBOTPW1000
250ml Plastic Bottle
500ml Plastic Bottle
1000ml Plastic Bottle
SMBOTADP30
30ml Acid Dropper Bottle PVC
SMPCRAT10
SMPAIL20
SMPAIL20-W
SMSAMTUB
SMVIALSJC5
SMVIALSJC10
No. 10 Plastic Crate (550mm x 350mm x 250mm)
Plastic pail 20L without lid, black
Plastic pail 20L without lid, white
Plastic tub (410mm x 280mm x 170mm)
42mm x 55mm Vials Screw Cap
42mm x 105mm Vials Screw Cap
Stapling Equipment
PASTAG5-8
PASTAP6-8
PASTAPC5019
PASTAPC5019A
T5-8 Staple Gun
P6-8 Staple Pliers
STCR 5019 Staples 10mm to suit T5-8 & P6-8
STCR 5019 Staples 6mm to suit T5-8 & P6-8
Packaging Tape
PATAFIL200
PATAPOLY200
PATAFIL200CW
PATADUCT48
Issued 30.01.2008 V5
48mm (2”) Filament Tape
48mm (2”) Polypropylene Tape
48mm (2”) Cross Weave Filament Tape
Duct Tape 48mm
Page 6 of 30
PRODUCT CODE
DESCRIPTION
Dymark Paint Spray & Mark Inverted Spray
MPENDSMB
MPENDSMFG
MPENDSMFO
MPENDSMFP
MPENDSMFR
MPENDSMFY
MPENDSMW
Dymark Spray and Mark Blue
Dymark Spray and Mark Fluoro Green
Dymark Spray and Mark Fluoro Orange
Dymark Spray and Mark Fluoro Pink
Dymark Spray and Mark Red
Dymark Spray and Mark Fluoro Yellow
Dymark Spray and Mark White
Dymark Bulk 20L Spray and Mark Paint
Dymark Mine Mark Vertical Spray
MPENDMMFB
MPENDMMFO
MPENDMMFP
MPENDMMFY
MPENDMMR
MPENDMMW
MPENDMMY
Dymark Mine Mark Fluoro Blue
Dymark Mine Mark Fluoro Orange
Dymark Mine Mark Fluoro Pink
Dymark Mine Mark Fluoro Yellow
Dymark Mine Mark Red
Dymark Mine Mark White
Dymark Mine Mark Yellow
Mine Safet Spray
Measuring Equipment
TAPE005.0ME
TAPE005.5ME
Issued 30.01.2008 V5
TAPE008.0ME
TAPE008.0MEA
TAPEMO030
TAPEMO050
TAPEMO100
TAPEXPOLY030
TAPEXPOLY050
TAPEXPOLY100
TAPESURCR
AWATERLEVEL050
AWATERLEVEL
AWATERLEVEL200
5m Metric Pocket Tape
5.5m Metric Pocket Tape 25mm wide (Large
Numerals)
8m Metric Pocket Tape
8m Metric Pocket Tape 25mm wide
30m Open Winder Fibreglass Tape
50m Open Winder Fibreglass Tape
100m Open Winder Fibreglass Tape
30m Polychain
50m Polychain
100m Polychain
Canvas Polychain Winder
50m Water Level Indicator
100m Water Level Indicator
200m Water Level Indicator
CHMANII
CHRHIP
Chainman II Measuring Device with 1800m Thread
1800m Hip Chain Refill
Page 7 of 30
PRODUCT CODE
DESCRIPTION
Measuring Equipment (cont'd)
SMROTO1000
SMROTO1000BAG
Measuring Wheel
Rotosure 1000 Carry Bag
GEDISTO
Hand Held Disto Leica Laser
Range 0.3m – 100m
Accuracy 3-5mm
Dormer Hand Augers
DOSA5010 (C)
DOSA6210 (C)
DOSA7510 (C)
DOSA10010 (C)
DOSOS5010 (C)
DOSOS7510 (C)
DOSOS10010 (C)
DOSPF5010 (C)
50mm x 1m Shell Type Sand Auger
62mm x 1m Shell Type Sand Auger
75mm x 1m Shell Type Sand Auger
100mm x 1m Shell Type Sand Auger
50mm x 1m Clay Soil Auger
75mm x 1m Clay Soil Auger
100mm x 1m Soil Auger
50mm x 1m Spiral Clay Auger
NOTE: Available in coarse (C)
Dormer Hand Augers Accessories
DOTBC
DOTHSC
DOEXT4010AC
DOEXT4010SC
DOCBAG10
DOADAPT
Tommy Bars (Pair)
T Handle
40mm x 1m Aluminium Extension
40mm x 1m Steel Extension
Auger Carry Bag with Handle to 1m
Adaptor Coarse to Fine
NOTE: Coarse thread designed to improve durability.
Hand Tools, Picks, Shovels
SPELPICK
SPELPICKH
Issued 30.01.2008 V5
Pelican Pick
Pelican Pick Handle
Page 8 of 30
PRODUCT CODE
DESCRIPTION
Estwing Hand Tools
SPE30
SPE314P
SPE320PC
SPE322P
SPE322LP
SPE3B2
SPE3B3
SPE3B4
SPE3B4LH
SPEPLUMB16P
E30 22oz Pick-Pointed Tip Leather Grip
E3-14P 14oz Pick
E3-20PC 20oz Chisel Edge Nylon – Vinyl Grip
E3-22P 22oz Pick-Pointed Tip Nylon – Vinyl Grip
E3-23LP 23oz Pick Long Handle
2lb Crack Hammer Nylon – Vinyl Grip
3lb Crack Hammer Nylon – Vinyl Grip
4lb Crack Hammer Nylon – Vinyl Grip
4lb Crack Hammer Long Handle
Nylon – Vinyl Grip
Plumb Geo Pick 16oz Fibreglass Handle Rubber Grip
(economical alternative to Estwing)
Plastic Panning Dishes
SPGP10PB
SPGP10PW
SPGP14GAR
SPGP14PB
10” (250mm) Panning Dish Black
10” (250mm) Panning Dish White
14” (350mm) Garrett Gravity
14” (350m) Panning Dish Black
Clinometers
SDOBASUPM5
SPSOLA13
SPSOLA50
PM5-360PC Suunto
13m Sola
50cm Sola
Pencil Magnets & Scribers
SBROMAG
SBROMAGCM88
Pencil Magnet Suspension Type
CM88 Pencil Magnet/Scriber
Map Measures/Planimeter
SDOPP7
Issued 30.01.2008 V5
Planix 7 Planimeter
Page 9 of 30
PRODUCT CODE
DESCRIPTION
Ultra Violet Lights
UVGL-48 Ultra Violet Lamp
SMUVGL48
Field Books
SUBOOKC2006
SUBOOKC2026
SUBOOKC2056
2006 Chartwell Lined 127mm x 203mm
2026 Chartwell Lined 127mm x 203mm
2056 Chartwell Graph 10th Imp 127mm x 203mm
SUBOOKC2106
SUBOOKC2206
SUBOOKC2281
SUBOOKC2416
2106 Chartwell102mm x 203mm ruled
2206 Chartwell 102mm x 165mm ruled
2281 Chartwell Waterproof Notebook 102mm x
152mm
2416 Chartwell Levelling Rise/Fall 191mm x 121mm
SUBOOKC2647
SUBOOKTOP
2647 Chartwell Mining Transit 191mm x 121mm
Sample Ticket Book 100 Pages
Compasses
SDOBKB360R
SDOBMC2
KB14-360R Suunto
MC-2 Suunto Mirror Compass with Clinometer
NOTE: Suunto Compasses available for all Latitudes Zone 1 to Zone 5
SPHMBRU1B
SDOBCOCLA
SDOBF65
SDOBF69
SDOB15DCL
SDOB15DCLS
5008 Brunton Pocket Transit
3180 Breithaupt Cocla with Leather Case
Clar 65 Freiberger with Mirror
Clar 69 Freiberger
15 TDCL Silva Compass/Clino
15 TDCL/S Silva Compass/Clino
Hand Lenses, Pocket Microscopes
SDLENS10
SDLENS20
SDOB200125
SDOB200150
SDOBHL2
SDOBHL4
SDOBHL5
SDOBHL7
Issued 30.01.2008 V5
10X Hand Lens Bausch & Lomb
20X Hand Lens Bausch & Lomb
Peak 2001 x 25 Pocket Microscope
Peak 2001 x 50 Pocket Microscope
10X Achromatic Hand Lens
20X Achromatic Hand Lens
10X Non Achromatic Hand Lens
10X 20X Combination Hand Lens Carton
Page 10 of 30
PRODUCT CODE
DESCRIPTION
Stereoscopes
SDOBSS1A
SDOBSS2A
Stereo-Aid X2 Pocket PVC
Stereo-Aid X4 Pocket PVC
SDOBSS3
SPECIAL
SPECIAL
Mirror Geoscope 101 PVC
Topcon MS-3 Bench Stereoscope
Sokkia MS-27 Bench Stereoscope
Miscellaneous
SDOB601
SMSHA912
SMTRAY
SCMAPJACK
COLMS9958
CMGSIZE
SUMTPT100
LABSLIDEKA
SMCTHRUW42
SMCTHRUW43
SMCTHRUW44
SMCTHRUW45
SMCTHRUW46
SMCTHRUW5
SMCTHRUW8
SUDP05
CORIENT
COLGCOL
Optical Square 180 deg Double/Double in Leather
Case
Aluminium Clipboard (216mm x 305mm)
Drying Tray Alum Foil
Mapping Jacket Medium Size
Munsell Soil Colour Chart
Grain Size Charts
Technostyl Extendable Map Tube
Kartell 100 Capacity Slide Box
W42 C-Thru Ruler
W43 C-Thru Ruler
W44 C-Thru Ruler
W45 C-Thru Ruler
W46 C-Thru Ruler
W5 C-Thru Ruler Metric/Imperial
W8 C-Thru Ruler Metric/Imperial
5” Douglas Protractor (Imperial)
Core Orientation PVC Template
Munsell Rock Colour Chart
Flexistack
Sieves
SIVFLEXC
SIVFLEXLID
SIVFLEXREC
SIVFLEXRIN
SIVFLEXTOOL
Issued 30.01.2008 V5
Flexistack PVC Sieve Complete Set
Flexistack Lid
Flexistack Receiver
Flexistack Ring
Flexistack Opening Tool
Page 11 of 30
PRODUCT CODE
DESCRIPTION
Sieves & Nylon Sieve Mesh
SIVMES0080
SIVMES0100
SIVMES0112
SIVMES0132
SIVMES0200
SIVMES0250
SIVMES0280
SIVMES0450
SIVMES0600
SIVMES0900
SIVMES1250
SIVMES2000
SIVMES4000
SMSCOPEM
SIVEGIE20
Sieve Mesh 80 Micron
Sieve Mesh 100 Micron
Sieve Mesh 112 Micron
Sieve Mesh 132 Micron
Sieve Mesh 200 Micron
Sieve Mesh 250 Micron
Sieve Mesh 280 Micron
Sieve Mesh 450 Micron
Sieve Mesh 600 Micron
Sieve Mesh 900 Micron
Sieve Mesh 1250 Micron
Sieve Mesh 2000 Micron
Sieve Mesh 4000 Micron
Sample Scoop Aluminium
20cm Vegie Sieve
Micron Size
80
100
112
132
150
200
250
280
450
600
900
1250
2000
4000
Mesh Per Inch
200
150
140
120
100
80
68
60
40
30
20
15
10
5
Aluminium Sieves
SIV001D13A
SIV002D13A
SIV003D13A
SIV004D13A
SIVREC13A
Aluminium Sieve 325mm x 1.6mm (13” x 1/16”)
Aluminium Sieve 325mm x 3.2mm (13” x 1/8”)
Aluminium Sieve 325mm x 4.8mm (13” x 3/16”)
Aluminium Sieve 325mm x 6.4mm (13” x ¼”)
Aluminium Receiver 13”
Leather Field Accessories
SMBOTADPOU
SPCRHOLST
SPE3POU
Issued 30.01.2008 V5
Acid Dropper Bottle Pouch
Crack Hammer Holster
Estwing Pick Pouch No. 3
Page 12 of 30
PRODUCT CODE
DESCRIPTION
Test Sieves
A full range of stainless steel test sieves available in all standard mesh sizes
and diameters
Scales
SCALESUWEM2
Scales 5 kg modified for SG (Specified Gravity) testing
A full range of electronic scales are available.
Sample Chip Trays
SMSAMCHIP02
2 Compartment Plastic Chip Trays Slide Lid 20mm
SMSAMCHIP05
5 Compartment Plastic Chip Trays Slide Lid 20mm
SMSAMCHIP05S
5 Compartment Plastic Chip Trays Slide Lid 8mm
SMSAMCHIPBOX
SMSAMCHIP20
Chip Tray Storage Box Wooden
20 Compartment Plastic Chip Trays
Drill Hole Plugs/PVC Collar Cutter/Shot Firing Wire
DOCTOPLUG
DSHOTHOLE
CMAA530-100
CMAA530-500
GECC1
GECC84
GEHCP170
GEHCP170L
Issued 30.01.2008 V5
7” Shot Hole Plug Doctoplug
Shot Hole Plug Party Hat Type
Shot Firing Wire 100 Metres
Shot Firing Wire 500 Metres
Duncan PVC Collar Cutter
Replacement Wheel for Duncan PVC Cutter
Hole Plug Plastic 170mm
Hole Plug Lid 170mm
Page 13 of 30
PRODUCT CODE
DESCRIPTION
Safety Equipment
SACLACAP
SACPNW
SAGPD
SAMUFF28
SARESP3M8710
SAPLUG
SA14409
SA14413
SAGRIG
Plastic Safety Cap with Lamp Bracket
Safety Cap White
Large Drillers Polka Dot Gloves
Hi Performance Ear Muff 28 DB
Respirator P2 3M8710
Deci Damp Ear Plugs
Safety Spec Viper Clear
Safety Spec Viper Smoke
Rigger Gloves
Camping Equipment
SCJERCANB
20lt Plastic Jerry Can
Casing Cap - Plastic
DSC1143
DSC1397
DSC1524
DSC1651
114mm (4½”) Sleeve Cap suit 100mm ID Casing
139mm (5½”) Sleeve Cap suit 125mm ID Casing
152mm (6”) Sleeve Cap suit 138mm ID Casing
165mm (6½”) Sleeve Cap suit 150mm ID Casing
Core Marking Blocks
NQMWBQ
NQMWHQ
NQMWNQ
NQMWBQAL
NQMWNQAL
NQMWHQAL
NQMPNX
Issued 30.01.2008 V5
BQ Wooden Core Blocks
HQ Wooden Core Blocks
NQ Wooden Core Blocks
BQ Wooden Core Blocks with Alum Tag
NQ Wooden Core Blocks with Alum Tag
HQ Wooden Core Blocks with Alum Tag
Sandvik Plastic Core Marker
Page 14 of 30
PRODUCT CODE
DESCRIPTION
Core Orientation
CORIENT
CORIENTDEV
COREPRO
Core Orientation Template
Core Orientation Device
Core Angle Protractor
CORIENTMAP
Core Map Core Orientation Unit
Survey Markers
SUSD940
SUSD1170
SUSP4.5F
SUSP6.0F
940mm Fence Droppers
1170mm Fence Droppers
1350mm Star Pickets
1800mm Star Pickets
Garmin 12 Channel GPS Units
Refer to our Customer Service Centres for the latest models available
Garmin Accessories
A full range of mounts, cables and antennae available to suit all Garmin GPS
Emergency Radio Beacon
GPMT310
GME EPIRB MT310
COSPAS/SARAT concept
Pocket size emergency protection
Radios
A full range of GME hand-held and vehicle mounted UHF radios and
accessories
Issued 30.01.2008 V5
Page 15 of 30
PRODUCT CODE
DESCRIPTION
Pin Markers
SUTMAB21
SUTMAP21
SUTMAR21
SUTMAG21
SUTMAW21
SUTMAY21
Plastic Light Blue
Plastic Pink
Plastic Red
Plastic Green
Plastic White
Plastic Yellow
Pin Flags
PINFLAGBL
PINFLAGGR
PINFLAGPI
PINFLAGRE
PINFLAGWH
PINFLAGYE
Pin Flags 150mm x 150mm Blue
Pin Flags 150mm x 150mm Green
Pin Flags 150mm x 150mm Pink
Pin Flags 150mm x 150mm Red
Pin Flags 150mm x 150mm White
Pin Flags 150mm x 150mm Yellow
Wooden Survey Stakes
SUST1211PT
SUST1522PT
SUST1811PT
SUST2411PT
SUST3011PT
SUST3611PT
SUST4211
SUST4211PT
SUST4811PT
SUST6011PT
300mm x 25mm x 25mm Painted Tops
375mm x 50mm x 50mm Painted Tops
450mm x 25mm x 25mm Painted Tops
600mm x 25mm x 25mm Painted Tops
750mm x 25mm x 25mm Painted Tops
900mm x 25mm x 25mm Painted Tops
1050mm x 25mm x 25mm Unpainted Tops
1050mm x 25mm x 25mm Painted Tops
1200mm x 25mm x 25mm Painted Tops
1500mm x 25mm x 25mm Painted Tops
Down Hole Survey Camera Consumables
HUB38872
KLESS017
KLE100ENV
Monobath Developer (Combinol)
Single Shot Film Disc 50/Rol
Film Disc Envelopes
Electronic Camera
Single Shot Down Hole Survey Camera Components
Camera and Coupling
Electronic Timer
Accessories
Issued 30.01.2008 V5
Page 16 of 30
PRODUCT CODE
DESCRIPTION
Reflex Down Hole Electronic "Camera" Tools for Rent and Purchase
Instrument Brass Barrel
Aluminium Survey
Landing Collars
Reflex Down Hole Core Orientation Tool
Available to rent only
Zinczap
Zinczap indicator A&B - zinc
Sandvik Core Saws
COSAW240V
Core Cutting Saw (2.4 hp) Single Phase
COSAWHD3PH4KW Core Cutting Saw Three Phase (4 kw)
COSAW5HPP
COMVHOLD
Core Cutting Saw Petrol (5 hp)
V Core Holder
Core saws are supplied with a trolley with mounted V core holder.
Diamond Saw Blades
3C1210
3C1210-1A
3C1220
12" (300mm) Corecut 1 blade hard/extra hard rock
12" (300mm) Corecut 1A blade ultra hard rock
12" (300mm) Corecut 2 blade medium/ soft abrasive
rock
3C1410
3C1410-1A
3C1420
14" (350mm) Corecut 1 blade hard/extra hard rock
14" (350mm) Corecut 1A blade ultra hard rock
14" (350mm) Corecut 2 blade medium/ soft abrasive
rock
Also available in silenced blanks
300mm blades available for Corewise/Almonte automatic saws
Corewise Core Saws
Purpose built for cutting diamond drill core.
COSAWAUTO
Corewise Auto Saw with 3 core holders
COSAWJUNIOR
Corewise Junior Saw with 1 core holder
Clamshell” V-Core Holders also available for broken ground.
Issued 30.01.2008 V5
Page 17 of 30
PRODUCT CODE
DESCRIPTION
Brikasauris
Brikasauris core cutting water recycler
Electronic Equipment
SMEXMAGKT-10
Magnetic Susceptibility Meter KT-10
SDOBE203
Suunto Electronic Altimeter/Barometer
Radiation Solutions Instruments
SMEXRS120
SMEXRS125
SMEXRS230
RS-120 Super SCINT handheld Gamma Scintillometer
RS-125 Super SPEC handheld Spectrometer,
radiation detector
RS-230 BGO Super SPEC handheld Gamma Ray
Spectrometer
Diamond Drill Core Diameter
AQ
BQ
NQ
NQ2
NMLC
NX
HQ
PQ
27.00mm
36.50mm
47.60mm
50.50mm
51.95mm
54.70mm
63.50mm
85.00mm
Premium Explorer Plastic Core Trays
COTEXBQ
COTEXHQ
COTEXNQ
EXCOREMARKBQ
EXCOREMARKHQ
EXCOREMARKNQ
Explorer BQ Plastic Core Tray
Explorer HQ Plastic Core Tray
Explorer NQ/NQ2 Plastic Core Tray
BQ Plastic Core Markers
HQ Plastic Core Markers
NQ Plastic Core Markers
Note: Explorer trays available in cheaper standard grade white recycled
plastic.
Issued 30.01.2008 V5
Page 18 of 30
PRODUCT CODE
DESCRIPTION
Impala Plastic Core Trays
COTIMBQ1M
COTIMHQ1M
COTIMNQ1M
COTIMPQ1M
BQ Plastic Core Trays 1000mm
HQ Plastic Core Trays 1000mm
NQ Plastic Core Trays 1000mm
PQ Plastic Core Trays 1000mm
Note: BQ available in 700mm lengths as well.
Ore Box Plastic Core Trays
GEPCTOBBQ
GEPCTOBNQ/NQ2
GEPCTOBHQ
GEPCTOBPQ
Ore Box BQ Plastic Tray
Ore Box NQ/NQ2 Plastic Tray
Ore Box HQ Plastic Tray
Ore Box PQ Plastic Tray
Sandvik Metal Core Trays
A full range available in zincalume material.
Issued 30.01.2008 V5
Page 19 of 30
PRODUCT CODE
DESCRIPTION
12.5/87.5
Field Sample Splitter
• Quality built to Australian Standards
• Three tier
• 12.5%: 87.5% single split
• Bag collect
• Mild Steel
• Stainless Steel (only as a 'special')
• Available in sizes 400 x 200mm to 500 x 200mm
• Blade spacing 25, 32mm
• Smaller or larger sizes available on request
(only as a 'special')
• Custom built to particular size requirements
• All standard sizes in stock
• Field use
• Gravity feed
• Accurate split
• Heavy gauge construction
• Fixed height stand
• Available with wheels for ease of use
• Robust construction
• Open splitter construction
• Stock available ex Perth, Brisbane & other
selected capital cities and regional centres
• Available F.O.B. and F.I.S.
• Proven reliability over 20 years
Issued 30.01.2008 V5
Page 20 of 30
PRODUCT CODE
DESCRIPTION
25/75
Field Sample Splitter
• 25%: 75% double split
• Tray collection
• Mild Steel
• Stainless Steel (only as a 'special')
• Available in sizes ranging from
450 x 200 to 600 x 200mm
• Blade spacing 19, 25, 32, 38mm
• Custom built to particular size requirements
• Field use
• Gravity feed
• Additional trays supplied if required
• 2 x collection 1 x additional tray supplied
• All standard sizes in stock
• Smaller or larger sizes available on request
(only as a 'special')
• Heavy gauge construction
• Available with bag collection
• Fixed or adjustable height stand
• Robust construction
• Open splitter construction
• Stock available ex Perth, Brisbane & other
selected capital cities and regional centres
• Available F.O.B. and F.I.S.
• Proven reliability over 20 years
Issued 30.01.2008 V5
Page 21 of 30
PRODUCT CODE
DESCRIPTION
50/50
Field Sample Splitter
• Quality built to Australian Standards
• Single tier
• 50%: 50% single split
• Tray collection
• Mild Steel
• Stainless Steel (only as a 'special')
• Available in sizes ranging from
450 x 200 to 600 x 200mm
• Blade spacing 19, 25, 32, 38mm
• Smaller or larger sizes available on request
(only as a 'special')
• Custom built to particular size requirements
• Field use
• Gravity feed
• Heavy gauge construction
• Open splitter construction
• Accurate split
• Additional trays supplied if required
• 2 x collection 1 x additional tray supplied
• Fixed or adjustable height stand
• All standard sizes in stock – mild steel only
• Available F.O.B. and F.I.S.
• Stock available ex Perth, Brisbane & other selected
capital cities and regional centres
• Proven reliability over 20 years
Issued 30.01.2008 V5
Page 22 of 30
PRODUCT CODE
DESCRIPTION
50/50
Laboratory Sample Splitter
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Quality built to Australian Standards
Single tier
50%: 50% single split
Tray collection
Mild Steel or Stainless Steel
Available in sizes ranging from 150 x 150 to
300 x 150mm
Blade spacing 12, 19, 25mm
Smaller or larger sizes available on request
Micro size (3mm aperture) available on request
Custom built to particular size requirements
Bench top laboratory use
Gravity feed
Enclosed splitter construction
Accurate split
Additional trays supplied if required
2 x collection 1 x additional tray supplied
All standard sizes in stock
Available F.O.B. and F.I.S.
Stock available ex Perth, Brisbane & other
selected capital cities and regional centres
• Proven reliability over 20 years
Issued 30.01.2008 V5
Page 23 of 30
PRODUCT CODE
DESCRIPTION
Sandvik Storage Trays AMC, FMC
Features of AMC, FMC series storage trays
•
•
•
•
•
•
•
•
•
Pressed body construction allowing total support of samples
Choice of tray material; aluminium alloy, galvanised iron, colorbond or zincalume
Strong riveted construction
Ends designed to allow fluids to drain out
Available with plain or foam lined lids
Designed for storage in Sandvik racking system or all other common storage systems
Packed in bundles of five, paletised then shrink wrapped for water proofing
All standard sizes stocked
Stock available ex Perth and other selected capital cities and regional centres, enabling all orders
to be filled (or part thereof) immediately
• Available F.O.B and F.I.S.
• Proven reliability over 25 years
• All products are fabricated in prime grade material to strict quality control in accordance with
Australian Standards Code AS 3902.
Full Depth Core Tray
•
•
•
•
•
•
Depth greater than core diameter
Can be stacked without crushing samples
Can be transported with or without lid
Narrow dividers maximise storage capacity
Row dividers in all core sizes are 35mm high
Available with optional side infill
• Unique flat bottom core tray
• Will slide over other trays without catching
• Double thickness of tray bottom gives
optimum product strength
• 12mm side fold gives added strength and
protection
• The spot welded tray ensures no rivets
protrude from the bottom of tray which
prevents catching
• Depth greater than core diameter
• Narrow dividers maximise storage capacity
• Can be stacked without crushing core samples
• Safety edges increase safety in handling
• Full height core dividers ensure minimal core
migration between rows
Issued 30.01.2008 V5
Page 24 of 30
PRODUCT CODE
DESCRIPTION
Sandvik Storage Trays - AMC, FMC
Sandvik Full Depth Core Tray Lids Suit – AMC, FMC
Unlined 810 x 470mm Lids
Aluminium (22 per carton)
Zincalume (10 per carton)
Unlined 1070 x 470mm Lids
Aluminium (22 per carton)
Zincalume (10 per carton)
Unlined 1000 x 400mm Lids
Aluminium (22 per carton)
Zincalume (10 per carton)
Foam Lined 810 x 470mm Lids
Foam Lined 1070 x 470mm
Lids
Aluminium (22 per carton)
Zincalume (10 per carton)
Foam Lined 1000 x 400mm
Lids
Aluminium (22 per carton)
Zincalume (10 per carton)
Aluminium (22 per carton)
Zincalume (10 per carton)
*All FMC sizes available in Queensland
Issued 30.01.2008 V5
Page 25 of 30
PRODUCT CODE
DESCRIPTION
Sandvik Core Storage Trays
CMC
COMPACT FOR EXPORT SHIPMENT
ASSEMBLY INSTRUCTIONS
Take an end section (1) and with thumb and forefinger
slightly compress each end near the “V” notches (2).
Bend each end through 90 degrees by pressing firmly against
a solid object (3) ensuring that the lugs are inside the
channel.
Fit the formed end over the body section with the mitred lug
to the underside of the tray (5).
With a pair of pliers crimp the top edge lug to the body
section (4).
Attach the other end in the same manner.
Drill and locate pop rivets in approximate positions shown (5)
to permanently secure the ends.
The tray is now ready for use.
Issued 30.01.2008 V5
Page 26 of 30
PRODUCT CODE
DESCRIPTION
Sandvik Core Tray Storage
Side Loading Modules
Features of Core Tray Storage – Side Loading Modules
• Quality built to Austr alian Standard
•
•
•
•
•
•
•
•
•
Ease of access to all samples
Readily assembled by one unskilled person
Field use or in-store use. Ideal for remote area usage
Side loading makes core samples accessible from both sides of the unit and doubles tray capacity
System can be custom built to suit individual requirements
All standard sizes in stock
Stock available ex Perth, Brisbane and other selected capital cities and regional centres
Available F.O.B and F.I.S.
Storage systems su pplied to the mining industry since 1966
• Available in 1.8m and 2.4m units
• Modules available in 62cm (MC 62) and 83mm
(MC83)
• Optional heights, slide rail spacings and rail designs
provide unlimited storage flexibility
• Robust heavy gauge construction
• Available in painted mild steel or galvanised finish
• Available with weather and security covers designed
to totally enclose all sizes of core storage modules
and maximise security
• Knock together construction allows for ease of
transport to site and virtually eliminates the need for
nuts, bolts and other fixings
• Flexibility of slide rail position allows
accommodation for every core tray size, from BQ
to percussion sample trays
• Normally a side loading unit cannot be installed
against a wall, but a specific half side loading unit
can be manufactured on request
Issued 30.01.2008 V5
• Flexibility of core library layout from single level to
two level with mezzanine floor
• Individual module consists of 4 legs with
supplementary modules consisting of 2 legs
• Compact package reduces freight costs and
damage in transit
• Ideal for export shipment
Page 27 of 30
PRODUCT CODE
DESCRIPTION
Sandvik Core Tray Storage
End Loading Modules
Features of Core Tray Storage – End Loading Modules
•Quality built to Austr alian Standard
•Ease of access to all samples
•Readily assembled by one unskilled person
•Field use or in-store use. Ideal for remote area usage
•System can be custom built to suit individual requirements
•All standard sizes in stock
•Stock available ex Perth, Brisbane and other selected capital cities and regional centres
•Available F.O.B and F.I.S.
•Storage systems su pplied to the mining industry since 1966
• Available in 1.8m and 2.4m units
• Modules available in 62cm (MC 62) and 83mm
(MC83)
• Optional heights, slide rail spacings and rail designs
provide unlimited storage flexibility
• Robust heavy gauge construction
• Available in painted mild steel or galvanised finish
• Available with weather and security covers designed
to totally enclose all sizes of core storage modules,
both single row and back to back installations
• Knock together construction allows for ease of
transport to site and virtually eliminates the need for
nuts, bolts and other fixings
• Flexibility of slide rail position allows
accommodation for every core tray size, from BQ
to percussion sample trays
• End loading allows for back to back installation in
open areas
• Ideal for remote usage
Issued 30.01.2008 V5
• Flexibility of core library layout from single level
to two level with mezzanine floor
• Individual module consists of 4 legs with
supplementary modules consisting of 2 legs
• Compact package reduces freight costs and
damage in transit
• Ideal for export shipment
Page 28 of 30
PRODUCT CODE
DESCRIPTION
Diamond Core Saw Blades
Variables That Influence Diamond Blade Performance
1. The Diamond Blade …
Match the right blade specification to the job.
Consider these variables:
•Hardness of the material being cut.
•Abrasiveness of the material being cut.
•Hardness of the blade’s bond.
•Concentration of diamonds in the blade.
•Type of saw and horsepower.
Also remember that diamond blades may have to be
sharpened periodically. Do this by making cuts through an
abrasive material such as concrete block until new
diamonds are exposed.
2. The Saw …
A saw’s condition can greatly influence cutting
performance. Look for:
•Worn or damaged bearings.
•Damaged drive pins (concrete saws).
•Wrong size or worn blade flanges.
•Worn arbor.
•Misaligned saw.
•Worn wheels or wheel bearings (concrete saws).
•Blocked water/coolant system.
•Worn or loose drive belts.
•Inadequate electric supply or power cords (electric
saws).
•Inadequate horsepower.
•Loose belts.
•Damaged water pump.
•Bent or damaged track and /or conveyor cart (tile and
masonry saws).
•Incorrect blade drive speed at the shaft for the size of
blade being used.
2. The Operator …
Saw operator may often make mistakes which can reduce
blade performance. Common mistakes include:
•Not matching the blade spec to the job.
•Twisting the blade while in a cut.
•Bouncing or jamming the blade in a cut.
•Allowing material to slip when cutting with a tile or
masonry saw.
•Not using proper amount of coolant.
•Not mounting the blade properly.
•Using a dry cutting blade on a concrete saw to cut
deeper than 1” in one pass.
•Using a dry cutting blade on a high speed cut-off saw to
cut deeper than 3” in one pass.
•Not cutting at the blade manufacturer’s recommended
RPM (concrete saws).
Issued 30.01.2008 V5
PROBLEM SOLVING
Arbor Hole Out-Of-Round
CAUSE : Saw arbor badly worn due to blade being improperly
seated.
REMEDY : Be certain the blade is properly seated
on the arbor before tightening flange.
CAUSE : Blade flanges not properly tightened permitting blade to
rotate on shaft.
REMEDY Always wrench tighten arbor nut –
Never hand tighten. Always use hex nuts – never
CAUSE : Blade flanges or arbor shaft worn and not providing proper blade support.
REMEDY: Check blade flanges or arbor shaft for wear. Both flanges should be no less
than that recommended by the manufacturer. Replace worn parts.
NOTE: If the out-or-round condition of the blade is not too serious, return the blade to
the factory for possible repair.
Eccentricity
CAUSE : The bond is too hard for the material being cut. The hard bond retains
the diamonds, and they begin to round off, causing the blade to become dull.
Instead of cutting, the blade begins to “pound”, causing the blade to wear out-ofround.
REMEDY : Change to a softer bond which will wear away more readily allowing
the dull diamonds to be released and sharp, new cutting edges to become
exposed.
CAUSE : The saw blade shaft may have a groove scored in it, caused by a blade
spinning between the flanges. A new blade, installed on the arbor shaft, will seat
into the groove, and immediately run eccentrically when the saw starts.
REMEDY : Replace the worn shaft.
CAUSE : If the blade shaft bearings are worn, the shaft and mandrel will
run eccentric causing the blade to wear out-of-round. This happens most
often with concrete saws when proper lubrication of the bearings is
neglected.
REMEDY : Install new blade shaft bearings. In some cases it might also
be necessary to replace the blade shaft, if it is worn or out of alignment.
Loss of Tension
CAUSE : Blade being used on misaligned saw.
REMEDY : Check for proper saw alignment.
CAUSE : Blade is excessively hard for the material being cut, creating stress on
the steel centre.
REMEDY : Make certain blade is correct for material being cut. (Consult
manufacturer’s recommendation chart or see your dealer.)
CA USE: Material slippage causing blade to twist and become kinked or bent.
REMEDY: Maintain tight grip on material while sawing.
CAUSE : Utilising blade flanges that are undersize or not the same diameter, creating
uneven pressure on the centre.
REMEDY : Make certain blade flanges are proper size and identical diameter, minimum
3-7/8’, 4-1/2’ on concrete saw; 6” minimum on diamond blades that are 30” diameter and
larger.
CAUSE : Blade being used at improper RPM.
REMEDY : Make certain blade shaft is turning at the proper RPM by using a
tachometer. This especially important with concrete saws.
CAUSE : Blade improperly mounted on arbor shoulder becomes bent when flanges are
tightened.
REMEDY : Hold blade securely on arbor shoulder until outside flange and nut are firmly
tightened.
Page 29 of 30
PRODUCT CODE
DESCRIPTION
Diamond Core Saw Blades
Variables That Influence Diamond Blade Performance
PROBLEM SOLVING
CAUSE: Excessive cutting pressure, or jamming or twisting the
blade in the cut can cause the blade core to bend or flex. When
subjected to extreme stress and metal fatigue, the blade’s steel core
will eventually crack.
REMEDY: The saw operator should use steady, even in feed
pressure, and be careful not to twist or jam the blade in the cut.
CAUSE: Overheating through inadequate water supply or improper
use of dry-cutting blades.
Cracked Segments
CAUSE : Lack of sufficient coolant to the blade. Often detected by excessive wear
in the centre of the segment. (NOTE: In both previous cases, diamonds will usually
be highly exposed).
REMEDY : Clean up water system. Make certain water pump is functioning
properly.
CAUSE: Wearing out-of-round accelerates wear. Usually can be caused by bad
bearings, worn shaft, or using a blade too hard for the materials being cut.
REMEDY: Check bearings and arbour. If worn, replace with new parts before
installing another blade.
CAUSE: Insufficient power caused by: loose V-belts, inadequate voltage, or
improper RPMs.
REMEDY: Tighten belts (TAUT). Replace worn belts. Check voltage. Use proper
size extension core.
Undercutting
CAUSE: Undercutting is a condition in which the steel centre wears faster than the
diamond segment, especially in the areas where the segment and core are joined.
The condition is caused by highly abrasive material grinding against the blade
during the sawing operation. Usually materials containing sand are responsible
for this condition (See section of SEGMENT LOSS).
REMEDY: The flow of swarf (abrasive cuttings) must be distributed over a wider
area, away from the critical segment area. Many times this can be accomplished by
using Polyarc segments or other types of undercut protectors, specially positioned
around the steel centre to change the pattern of constant abrasion. Although
successful in most cases, undercut protectors do not provide 100% protection.
Segment Loss
CAUSE : Blade is too hard for the material being cut.
REMEDY : Use correct blade with softer bond.
Blade Won’t Cut
CAUSE : Blade is too hard for materials being cut. Examples: Block or
General Purpose Blade being used for extended period on hard brick.
Asphalt blade being used to cut hard concrete.
REMEDY : Consult dealer or manufacturer for proper blade to cut
materials on job.
CAUSE : Insufficient power to permit blade to cut properly. (Loose V-belts,
low voltage, motor lacks horsepower).
REMEDY : Check belts, voltage, horsepower.
CAUSE : Blade has become dull because of continuous use on fairly hard
or vitrified material.
REMEDY : Dress with abrasive material until diamonds become exposed
again. (This may be necessary occasionally but if dullness occurs too
often, the blade is probably too hard for the material).
CAUSE : Blade segments appear to still have plenty of life but blade won’t
cut.
REMEDY : Some harder bonded blades designed for abrasive materials
require a non-diamond bearing section at the base of the diamond segment
for better adherence to the steel core. A blade used to this stage has worn
out in the normal manner and should be replaced.
CAUSE: The material slips during cutting which twists or jams the
segments loose.
REMEDY: Hold the material securely while cutting.
CAUSE: Blade is too hard for the material it is cutting, causing excessive
dullness which causes the segment to pound off, or fatigue.
REMEDY: Use a softer blade specification.
CAUSE: Worn blade flanges fail to provide proper support causing the
blade to deflect.
REMEDY: Replace both blade flanges.
CAUSE: Out-of-round blade rotation resulting in pounding, caused by
worn arbour or bad bearings in the shaft.
REMEDY: Replace worn arbour and/or bearings.
CAUSE: Overheating. Usually easily detected by bluish colour on
steel centre, generally confined to the area where the segment was
lost.
REMEDY: Check the water system for blocked water passages. Test
pump to see if it is functioning. For dry cutting it may be necessary to
make shallower cuts and allow the blade to run free every few
minutes to let the air cool it.
REPAIR NOTE: It is possible to replace two or three missing
diamond segments providing the steel centre is not cracked or
undercut badly. If many segments are missing, or if there is less than
50% of blade life remaining, repairing the diamond blade may not be
economical. Be certain to eliminate mechanical or operational
problems before installing replacement blades.
Uneven Segment Wear
Excessive Wear
CAUSE : Using the wrong blade on highly abrasive material. (Example:
Glazed tile blade on concrete block).
REMEDY : Consult the dealer or manufacturer for the proper blade
specification for abrasive material.
Issued 30.01.2008 V5
CAUSE: Segments worn on one side reducing side clearance.
Usually caused by misalignment of the saw – or a lack of sufficient
water on both sides of the blade.
REMEDY: Check saw alignment, clean water system, making certain
that water is properly applied to the leading edge of the blade flanges.
Check to see if pump is supplying sufficient, even water. (See RAPID
WEAR section).
CAUSE: Blade is worn out-of-round due to bad bearings, worn arbour
or excessive dulling condition (See section on EXCESSIVE WEAR).
REMEDY : Replace bearings or worn arbour as required.
Page 30 of 30
DIRECT YOUR ENQUIRIES TO:
Sandvik Mining and Construction Adelaide Ltd
136 Daws Road, Melrose Park SA 5039
Phone (08) 8276 7655 Fax (08) 8276 8509
E-mail: adelaide.exploration@sandvik.com
- FOR YOUR LOCAL SANDVIK OFFICE CALL 1300 737 740 SANDVIK – ADELAIDE
Phone: (08) 8276 7655
Fax:
(08) 8276 8509
SANDVIK – BENDIGO
Phone: (03) 5447 7100
Fax:
(03) 5447 7688
SANDVIK - BRISBANE
Phone: (07) 3375 3300
Fax:
(07) 3375 3582
SANDVIK - BROKEN HILL
Phone: (08)8088 2111
Fax:
(08) 8088 4411
SANDVIK KALGOORLIE
Phone: (08) 9091 6300
Fax:
(08) 9091 6003
SANDVIK - PERTH
Phone: (08) 9334 4100
Fax:
(08) 9455 6399
SANDVIK - PILBARA
Phone: (08) 9143 3642
Fax:
(08) 9189 3261
SANDVIK - MOUNT ISA
Phone: (07) 4743 8111
Fax:
(07) 4743 2635
SANDVIK - OLYMPIC DAM
Phone: (08) 8671 0015
Fax:
(08) 8671 0115
SANDVIK - ORANGE
Phone: (02) 6361 7600
Fax:
(02) 6361 7610
SANDVIK-ROCKHAMPTON
Phone: (07) 4922 6911
Fax: (07) 4922 6944
SANDVIK - SINGLETON
Phone: (02) 6572 2699
Fax:
(02) 6572 2933
SANDVIK - TOWNSVILLE
Phone: (07) 4774 4675
Fax:
(07) 4774 4656