SSMP® Interconnect Series
SMP
INTRODUCTION
SSMP
Carlisle Interconnect Technologies (CarlisleIT) designed the
SSMP® connector product line to further improve package
density of RF/Microwave systems. The SSMP® interface
is about 30% smaller than its predecessor, the SMP
connector. Now an industry standard (as outlined in the
MIL-STD-348 document) for RF/Microwave applications,
the SSMP® interface has enabled design engineers to
increase performance and complexity of their designs while
simultaneously improving upon their form factor.
The SSMP® interconnect system relies on a floating femaleto-female adapter, commonly referred to as a “bullet”,
to enable stacking of boards equipped with an SSMP®
male PCB connector. The durable construction and ability
to tolerate radial and axial misalignment allows for a
blindmate interconnect solution that can withstand multiple
engagement/ disengagement cycles without degradation in
electrical performance.
Due to its high frequency performance along with a
blindmate configuration, the SSMP® connector is a standard
interface in optical networking components, specifically
40G and 100G Modulator and Driver amplifiers.
40G Optical Modulator with SSMP® Connector
SPECIFICATIONS
Parameter
Specification
Impedance
50 Ω
Frequency range
DC - 65 GHz
VSWR
1.02 + 0.12 f (GHz)
Insertion Loss
0.04 x √F (GHz)
DWV
325 Vrms
Insulation Resistance
5000 MΩ (min)
RF High Pot
190 Vrms @ 5 MHz
Force to
Engage
Force to
Disengage
FEATURES
»» Frequency Range: DC - 65 GHz
»» 50 Ω Impedance; Blindmateable configuration
»» MIL-PRF-39012 compliant
»» Ability to withstand Radial/Axial Misalignment
»» Board-mount, Field-replaceable, Bullets, Hermetic
and Cable Connector configurations
»» Custom Connectors Available
Detent
6.5 lbs (max)
Smooth Bore
2.5 lbs (max)
Detent
4 lbs (min)
Smooth Bore
1.5 lbs (min)
Radial Misalignment
+/- .010 inches
Axial Misalignment
0.000/0.010 inches
Temperature range
-55° C to +165° C
Thermal Shock
MIL-STD-202, Method 107, Cond. C
Moisture Resistance
MIL-STD-202, Method 106, except step 7b
Corrosion
MIL-STD-202. Method 101, Cond. B
Vibration
MIL-STD-202, Method 204, Cond. D
Shock
MIL-STD-202, Method 213, Cond. I
Carlisle Interconnect Technologies / 12900 Alondra Blvd., Cerritos, CA 90703
Toll Free - 866.282.4708 / Fax - 562.494.0955 / CarlisleIT.com
SSMP® Configurations
CABLE CONNECTORS - FOR FLEXIBLE CABLES
SSMP Female Straight Connector for Semi-Rigid
and Semi-Flex Cable / P107
SSMP Male Straight Panel Mount Connector for
0.086” Flexible Cable / P156
.1350
Ø .1335
(.75)
Connector
Installed View
SSMP Male Straight Surface Mount / P311
R.P.
(.290)
SSMP FEMALE
INTERFACE
carlisle
PCB CONNECTORS - SURFACE MOUNT
SSMP Female Snap-In Panel Mount Connector for Semi-Rigid
and Semi-Flex Cables / P172-1CC
.144
.142
R.P.
TO ACCEPT Ø .047
SEMI-RIGID CABLE
SSMP FEMALE
INTERFACE
(Ø .078)
Ø .095 MAX
SSMP MALE
INTERFACE
ØA
.414±.010
TO ACCEPT Ø .047
SEMI-RIGID CABLE
.265
Ø .115
(Ø .180)
.030
.026
(Ø .113)
.125±.002
Recommended Mounting Panel
(4XB)
(Ø .012)
-B-
Ø .076
f
.004 B
Figure 1
Figure 1
(.113)
ØA
(.070)
(.096)
SSMP MALE
INTERFACE
.125 PANEL
THICKNESS
.040
(Ø .142)
.140±.001
FLAT
TO ACCEPT FLEX
CABLE
R.P.
Ø .150
±.001
(.086)
2X .030
-C-
(.290)
f
Figure 2
.005 m A C
f
.157
Ø ±.001
(.085 TYP.)
-A-
Figure 2
ØA
.169
Ø ±.002
(4X Ø .020)
(.043)
.005 m C
-B-
.089
±.002
Ø .095 MAX
2X
.156 SQ.
Ø .012
(.010)
TO ACCEPT Ø .085
SEMI-RIGID CABLE
DIELECTRIC
STOP
R.P.
(Ø .165)
Ø .130
30°
2X .032
SCREWDRIVER SLOT
SSMP MALE
INTERFACE
Ø .115
.026
.144
.142
(Ø .059)
.026
SSMP FEMALE
INTERFACE
(Ø .120)
(Ø A)
(Ø .187)
.117
(.042)
.113
R.P.
(.010)
P/N
FIGURE(S)
Cable Type
-1CC
1
.047 CABLE
-2CC
2
.085 CABLE
.030
(Ø .012)
-B-
Recommended Mounting Hole
f .004 B
Figure 3
(Ø .059)
(.113)
tbd
P/N
INTERFACE(S)
(Ø A)
Cable Type
DETENT
(.0845)
-2CCSF
SMOOTH BORE
(.0875)
TLL40-1087, TLL18-1087,
T-FLEX 405HF, Ø .095 MICROFLEX
-C-
Ø .130
.1350
Ø .1335 TYP.
-1CCSF
2X
.156 SQ.
.026
SSMP Male Snap in Panel Mount Connector for Semi-Rigid
and Semi-Flex Cable / P155
SSMP Female Right Angle for 0.047” Semi-Rigid
and Semi-Flex Cable / P148-1CC
(.110)
(.200)
SSMP FEMALE
INTERFACE
Ø .012
(.010)
f
(.043)
A C
f .005 m C
-A-
Figure 4
TO ACCEPT Ø B
SEMI-RIGID CABLE
SSMP MALE
INTERFACE
.005 m
-B-
.095
.091
(.160)
30°
R .015 TYP.
2X .089
Ø .180/.175
2X .051
.085±.002
TYP.
2X .014
(Ø .090)
(.160)
(.049)
CABLE CONNECTORS - FOR SEMI-RIGID & SEMI-FLEX® CABLES
.158
Ø .156
Ø .170±.002
(Ø .146)
(Ø A)
(Ø .108)
(Ø .178)
.021*
.044*
SSMP Female Right Angle for Semi-Rigid and Semi-Flex Cable / P105
SSMP FEMALE
INTERFACE
B
.068 MIN
.110 MAX.
(R .126)
TO ACCEPT Ø .047
SEMI-RIGID CABLE
(.080)
TO ACCEPT “Ø A”
SEMI-RIGID CABLE
Ø .059
Mounting Hole Pattern
* DIMENsions shown are for Rogers 4350 PCB Material. These
dimensions may vary depending on pcb material used.
(.200)
(.161)
(.147)
ØA
B
C
-1CC
.047
.250
.195
-2CC
.085
.250
.195
-3CC
.047 L/L
.178
.126
P/N
ØA
INTERFACE
Ø B CABLE
-1CCSF
.088
SMOOTH BORE
.086
-2CCSF
(Ø .091)
P/N
-3CCSF
-4CCSF
SSMP FEMALE
INTERFACE
4X Ø .025±.002
(NOT RE’Q FOR -3CC,
-4CC & -6CC
.088
(.302)
R.P.
(.108 SQ)
.030 TYP.
.046
FOR .093
PANEL
THICKNESS
Mounting Panel
Scale: None
(Ø .156)
(Ø .091)
2
(Ø .051)
(Ø .0292)
(Ø .020)
CROSS HOLE
CAP
C
(Ø .165)
(Ø .187)
ØA
.125 PANEL
THICKNESS
.113
R.P.
(.010)
TO ACCEPT Ø .047
SEMI-RIGID CABLE
.085
.088
.085
DETENT
SMOOTH BORE
DETENT
.086
.047
.047
P/N
ØA
B
INTERFACE
FIGURE
-1CC
.085
.050
DETENT
1
-2CC
.088
.050
NON-DETENT
1
-3CC
.085
NR
DETENT
3
3
-4CC
.088
NR
DETENT
-5CC
.088
.050
CATCHERs mitt
2
-6CC
.088
NR
CATCHERs mitt
4
3
SSMP® Configurations
PCB CONNECTORS - THROUGH HOLE
PANEL MOUNT - THREAD-IN
SSMP Male Right Angle PCB Mount / P303
SSMP MALE
INTERFACE
(.030 wide x .040 deep)
screwdriver slot
SSMP MALE
INTERFACE
.041
(.035)
(.125)
(.088)
.005±.001
(Ø A)
Ø.146 +.003
-.000
OVER STRAIGHT KNURL
ssmp male
interface
ØA
(.249 TYP)
Ø.140 +.000
-.002
(.141)
(Ø .012)
(Ø .126)
(Ø .032)
(.070 TYP)
(.082)
dielectric
(.020)
(Ø .024)
(.083)
Ø .120
±.003
2X (Ø .073)
SSMP MALE
INTERFACE
B
Ø .048±.001
Ø A Ø .135
.096
2X ±.002
.030
4X Ø ±.001
P/N
INTERFACE
(Ø A)
-1CC
DETENT
(.084)
-2CC
SMOOTH BORE
(.088)
P/N
INTERFACE
(Ø A)
-1SF
FULL DETENT
.0840
-2SF
SMOOTH BORE
.0880
Ø.141 +.002
-.000
HERMETICS
SHROUDS - THREAD-IN
SSMP Male Straight Hermetic Termination / P122
SSMP Male Thread-In Shroud / P202
Ø .035
.033
(.091)
(THD .164-64
UNS-2A)
.040
ssmp male
interface
(.050)
(.180)
(.115)
SSMP MALE
INTERFACE
(THD .164-64
UNS-2A)
(.091)
(.040)
(Ø .085)
.035 THD RELIEF
.135
(Ø .176)
SSMP MALE
INTERFACE
SSMP MALE
INTERFACE
.205±.001
(Ø .115)
SMOOTH BORE
.164-64 UNS-2B
SSMP Male Straight Edge Mount Connector / P319
(.069)
DETENT
-2SF
Ø .173
Ø .148±.003
PCB CONNECTORS - EDGE MOUNT
INTERFACE
-1SF
Recommended Mounting Hole
.165
(.138)
P/N
Figure 2
Recommended Mounting
Hole Pattern
(.109)
(Ø .375)
R.P.
Figure 1
(.024 TYP)
(.282)
(Ø A)
(.164-64 UNS-2A
THREAD)
R.P.
(.120 TYP)
.030
Ø ±.001
SSMP MALE
INTERFACE
(.062)
.030
B
(Ø .147)
SSMP Male Press-In Shroud / P205
(.091)
(.165)
R.P.
SHROUDS - PRESS-IN
SSMP Male 2-Hole Flange Mount / P203
SSMP Male Thread-In Panel Mount / P121
(.285)
(.120)
PANEL MOUNT - FLANGE MOUNT
Recommended Mounting Hole
(Ø A)
(Ø .012)
(Ø .135)
(Ø .125) (Ø A)
(Ø .012)
(.067)
ØA
B
-1CCSF
.0840/.0850
.015
DETENT
1
-2CCSF
.0860/.0880
.015
SMOOTH BORE
1
-3CCSF
.0840/.0850
.065
DETENT
1
-4CCSF
.0860/.0880
.065
SMOOTH BORE
1
(.018 TYP.)
-5CCSF
.0860/.0880
.015
CATCHERs mitt
2
(.033)
-6CCSF
.0860/.0880
.065
CATCHERs mitt
2
(.083)
(.134)
R.P.
(.050 TYP.)
(.053 TYP.)
(.038 TYP.)
(Ø .012) PLATED
THROUGH HOLES
(2X .135)
(.016)
(.229)
(.199)
(.078)
(2X FULL R .0125)
(.047 TYP.)
P/N
INTERFACE
FIGURE
(.083)
(.043)
slot depth
(.043)
slot depth
(.083)
R.P.
R.P.
R.P.
Figure 1
(.025)
Figure 2
.020±.001
(.014)
Recommended PCB Cutout Scale: 6/1
.020±.001
.095±.001
(.030) screW
driver slot
P/N
INTERFACE
FIGURE
-1CCSF
DETENT
1
-2CCSF
SMOOTH BORE
1
-3CCSF
CATCHERS MITT
2
.012/.010
.012/.010
Ø .067
.065
Ø .067
.065
Ø .092
.090
Ø .029/.028
Ø .120
.115
(.104±.001)
4
R.P.
Ø .135
.130
TBD BY USER
.015/.011
Ø .092
.090
Ø .029/.028
Ø .120
.115
TBD BY USER
.015/.011
P/N
INTERFACE
(Ø A)
P/N
INTERFACE
(Ø A)
-1CC
DETENT
(.085)
-3CC
DETENT
.084
-2CC
SMOOTH BORE
(.088)
-4CC
SMOOTH BORE
.088
5
SSMP® Configurations
HERMETICS (CONT.)
LOADS
BULLETS / ADAPTERS
SSMP Female 50 Ω Termination / P109-1CC
SSMP Male with Detent, Straight Solder-In Hermetic / P154
SSMP Female to SSMP Female Bullet / P101
.141±.001
R.P.
R.P.
.091±.001
L
Ø .130±.001
SSMP FEMALE
INTERFACE
R.P.
.210±.002
(Ø .125)
(.330)
SSMP FEMALE
INTERFACE (TYP)
(Ø .012)
2X Ø .095 MAX
2X Ø .109 MAX
(Ø .091)
(Ø .0850)
.070
Ø .085±.001
SSMP MALE
INTERFACE
Figure 1
(.083)
R.P.
SSMP Female to SSMP Female Bullet / P101-1CC
SSMP Male 50 Ω Termination / P110
.011/.015
.210±.002
Ø .088/.090
SSMP MALE INTERFACE
PER CARLISLEIT WS134
Ø .057
.053
SHORTS
.320/.345
Ø .028
±.001
SSMP FEMALE
INTERFACE (TYP)
2X Ø .109 MAX
SSMP Female Short / P170-1CC
Ø .120
.115
2X Ø .090 MAX
.070
R.P.
(Ø .125)
Ø .140
.136
R.P.
R.P.
.040/.045
AS REQ’D
(Ø .125)
(.330)
SSMP FEMALE
INTERFACE
Figure 2
.003/.005
.144/.147
R.P.
DIAMOND KNURL
(Ø .091)
Recommended Mounting Hole Scale 10:1
P/N
INTERFACE
P/N
L
P/N
L
-1CCSF
DETENT
-1CC
.030
-12CC
.085
-2CCSF
SMOOTH BORE
-2CC
.035
-13CC
.090
-3CC
.040
-14CC
.095
-4CC
.045
-15CC
.100
-5CC
.050
-16CC
.105
-6CC
.055
-17CC
.110
-7CC
.060
-18CC
.115
-8CC
.065
-19CC
.120
-9CC
.070
-20CC
.125
-10CC
.075
-21CC
.130
-11CC
.080
-22CC
.135
SSMP Male Short / P180
SSMP MALE
INTERFACE
OPENS
P/N
FIGURE
OTHER
-1CC
1
4-Slot Body
-2CC
2
6-Slot Body
SSMP Female to SSMP Female Spring Loaded Bullet / P138
R.P.
.320/.345
R.P.
A (OPEN)
A (CLOSED)
SSMP FEMALE
INTERFACE (TYP)
(Ø .091)
(Ø .125)
(Ø .091)
SSMP Female Open / P171-1CC
(.070) TYP.
R.P.
DIAMOND KNURL
R.P.
(.330)
SSMP FEMALE
INTERFACE
(Ø .091)
P/N
INTERFACE
P/N
A (OPEN)
A (CLOSE)
-1CCSF
(.515)
(.490)
-1CCSF
DETENT
-2CCSF
(.490)
(.465)
-2CCSF
SMOOTH BORE
-3CCSF
(.465)
(.440)
-5CCSF
(.552)
(.502)
-6CCSF
(.600)
(.550)
-7CCSF
(.427)
(.387)
(Ø .125)
SSMP Male with Detent, Straight Solder-In Hermetic / P154
6
7
Ordering Information
MATERIALS & FINISH
Dielectric
Specification
Metal
Specification
Virgin PTFE Fluorocarbon
ASTM D 1710 and ASTM D 1457
BeCu (Beryllium Copper)
ASTM B 196 and/or ASTM B 197
Polyamide-imide
ASTM D5204 Group 2 Class 1
Brass
ASTM B 36, B121, B16, B16M
Glass
Corning 7070 or Equivalent
Stainless Steel
ASTM A484/ A582 or A555/581
Finish
Specification
Iron-Nickel-Cobalt
ASTM F-15
Gold (75u in. Typ)
ASTM-B488 Type 1, Class 1.25
Nickel (100u in. Typ)
SAE AMS-QQ-N-290
Passivation
ASTM A967
ORDERING INFORMATION
Configuration
For Flexible Cables
Cable Connectors
For Semi-Rigid &
Semi-Flex® Cables
PCB Connectors
Panel Mount
Part Number*
Description
Options
P156
SSMP (male) straight panel mount connector for 0.086” flexible cable
See table for options
P107
SSMP (female) straight connector for semi-rigid and Semi-Flex cables
P105
SSMP (female) right angle for semi-rigid/Semi-Flex cables
P148
SSMP (female) right angle for 0.047” semi-rigid/Semi-Flex cables
P172
SSMP (female) snap-in panel mount connector for semi-rigid/Semi-Flex cables
P155
SSMP (male) snap-in panel mount connector for semi-rigid/Semi-Flex cables
Through Hole
P303
SSMP (male) right angle PCB mount
Surface Mount
P311
SSMP (male) straight surface mount
Edge Mount
P319
SSMP (male) straight edge mount connector
Flange Mount
P203
SSMP (male) 2-hole flange mount
Thread-In
P121
SSMP (male) thread-in panel mount
Thread-In
P202
SSMP (male) thread-in shroud
Press-In
P205
SSMP (male) press-in shroud
P122
SSMP (male) straight hermetic termination
P154
SSMP (male) with detent, straight solder-in hermetic
P109-1CC +
SSMP (female) 50 Ω termination
P110
SSMP (male) 50 Ω termination
P170-1CC +
SSMP (female) short
P180
SSMP (male) short
Shrouds
Hermetics
Loads
Shorts
Opens
Bullets/Adapters
See respective tables for options (see figure)
Different detents available (see figure)
See table for detents
See table for detents
Different dentents and pin styles available
See table for detents
See table for detents
P171-1CC
SSMP (female) open
See table for detents
P101
SSMP (female) to SSMP (female) bullet
P138
SSMP (female) to SSMP (female) spring loaded bullet
4-slot & 6-slot CC designs available (see
table)
P123-1CCSF +
SSMP (female) to SMK/2.92mm (male) straight adapter
P125-1CCSF
SSMP (female) to SMK/2.92mm (female) straight adapter
+
P127
SSMP (female) to SMA (female) straight adapter
P130
SSMP (male) to SMA (male) straight adapter
P128
SSMP (male) to SMA (female) straight adapter
* Part numbers have a suffix based on the option selected. Please refer to outline drawings for more information
+
These part numbers don’t require an additional suffix
Carlisle Interconnect Technologies / 12900 Alondra Blvd., Cerritos, CA 90703
Toll Free - 866.282.4708 / Fax - 562.494.0955 / CarlisleIT.com
© Carlisle Interconnect Technologies, 2012. All trademarks, service marks and trade names are property of their respective holding companies. All Rights Reserved.
Rev. 010813-3000