RX-40QZ - Optex (Europe)

advertisement
PASSIVE INFRARED DETECTOR
RX-40QZ
QUAD ZONE LOGIC
Optex improves its patented "Multifocus Optics" technology to create "Quad Zone
Logic" for accurate detection of humans. Using this logic the RX-40QZ has been
designed to give extremely high false alarm protection with tolerance to spot
temperature changes from curtains or small animals.
Optex's Optical Quad Technology uses taller detection zones divided into upper
and lower areas. It detects IR energy changes in both areas and then couples them
for extremely accurate detections, offering very high reliability in hostile areas.
Passive Infrared Detector
FEATURES
RX-40QZ
TECHNOLOGY FOR HIGHEST RELIABILITY
Quad Zone Logic - Improved Patented Technology
Quad Zone Logic provides multi
(Pitch = 2.63inch/66.7mm)
20
25
30
35
40 ft.
1
2
4
6
8
10
12m
to 8 zones for a human sized object to
Sealing
Sponge
8 ft.
2.4
of each zone. It is designed to provide 4
LED
Wiring Knockouts
15
created by the cumulated total IR energy
Tamper Switch
Indicator
10
the detection area. An alarm signal is
Mounting Knockout
Alarm
5
0
segmented detection zones throughout
Terminals
create sharp and maximum signals for
stable detection. Spot temperature
changes, i.e. by rodents or curtains etc.,
Lens
may affect only one or two zones at the
same time creating a smaller detection
signal. These signals are further
analysed by the "ECO" Chip and signal
processing circuit for accurate detection
and filtering out of false alarms.
Cover Fastening
Screw
Sealed
Wiring Guide
Spherical Lens
- Technology to Back Up Quad Zone Logic
Optics
Sensor
Foam
(Do not touch)
Obtains an accurate focal length for each detection zone
Pulse Count
LED ON/OFF
Selector (2/4)
and maximises the performance of Quad Zone Logic.
Switch
TROUBLE-FREE & EASY INSTALLATION
Sealed Housing
RFI Protection
Trouble-Free &
Easy Knockouts
Prevents drafts and
PERFORMANCE
Temperature Compensation Logic
No alarm at 20V/m from 100MHz
Eco chip includes temperature
to 1 GHz
compensation circuit. It controls
insects from reaching
Simply push with a screwdriver
the pyro element.
to open a hole of matching size
sensitivity to improve stability
with the cables.
against changes in environmental
conditions.
Optional Multi-Angle Bracket
FA-3
Sealed
Wall & Ceiling Mounting Bracket
Optics
Pyroelectric
Element
10
Coverage
TOP VIEW
15
20
25
30
35
6
4
20ft
Mounting Height
15
Sensitivity
5
Detection Speed
0
10
20
30
40
50
1.5m
0
5ft
1.5m
0
5
2
60ft
5ft
0
0
0
5
10
15
18m
2
4
6
8
10
0
5
Power Supply
20ft
Current Consumption
15
20
25
30
35
0
40ft
10
Operating Temperature
20
30
40
50
60ft
Operating Humidity
RF Interference
2.4m
0
2
4
6
8
10
8ft
12m
2.4m (5
Long: 20 zones
8ft)
1.5m/sec. (1
5ft/sec.)
DIMENSIONS
Switchable On/Off
62(2.44)
Approx. 2.5 sec.
N.C., 28VDC, 0.2A max.
N.C., Open when cover is removed
Approx. 20 sec. 2 or 4
Approx. 30 sec.
9.5
16VDC
8mA (normal),11mA (max.) at 12VDC
Weight
12m
SIDE VIEW
10
0.3
Warm-up Period
15
SIDE VIEW
1.5
2 C at 0.6m/sec. (3.6 F at 2ft/sec.)
Alarm Period
Tamper Switch
Long: 18m x 1.8m (60ft x 6ft) Long Range
Detection Zones
Wide: 78 zones
LED Alarm Indicator
Alarm Output
*FL-60N (Optional Lens for Long Range Curtain Pattern)
Coverage
Wide: 12m x 12m (40ft x 40ft), 85 wide
Pulse Count
10
4
6
RX-40QZ
Passive Infrared
Detection Zones
40ft
10
2
Multi Layer Curtain Lens)
Detection Method
(OPTIONAL LENS : FL-60N)
TOP VIEW
Long Range (Extremely Dense
Model
LONG RANGE
WIDE ANGLE
45¡, Vertically 0¡ to 15¡ downwards
FL-60N
SPECIFICATIONS
DETECTION PATTERNS
5
Horizontally
Durable Spherical Lens and
Housing Design
Good Wiring Space and Guide
Selectable Pulse Count :
2 or 4
LED On/Off Switch
97(3.82)
Foam
70g (2.5 oz.)
-20 C
+50 C (-4 F
+122 F)
44(1.73)
95% max.
mm (inch)
No Alarm 20V/m
Specifications and design are subject to change without prior notice.
2.4m
0
5
10
15
18m
NOTE: This unit is designed to detect movement of an intruder and activate an alarm control panel. Being only a part of a complete system, we can not
accept responsibility for any damages or other consequences resulting from an intrusion. This product conforms to the EMC Directive. 89/336 EEC.
OPTEX CO., LTD. (ISO 9001 Certified by LRQA / ISO14001 Certified by JET)
5-8-12 Ogoto, Otsu, Shiga, 520-0101 Japan
TEL +81(0)77 579 8670 FAX +81(0)77 579 8190
http://www.optex.co.jp/e
OPTEX INCORPORATED (USA)
http://www.optexamerica.com
OPTEX (EUROPE) LTD. (UK)
http://www.optexeurope.com
OPTEX SECURITY SAS (FRANCE)
http://www.optex-security.com
OPTEX KOREA CO., LTD. (KOREA)
http://www.optexkorea.com
(ISO9001 Certified by NQA)
ÒTake Care of the EnvironmentÓ This catalogue uses recycled paper
No. 75013-13-909-0503
Download