LED Linear Light Engine lleSeries Specifications
The Lumenetix lleSeries is a LED linear light engine with integrated thermal management, optics and controls. The lleSeries features
Thermalok™, a revolutionary thermal storage technology. With
Thermalok, the integration of the lleSeries into products is less complex than conventional LED lighting solutions. Available in standard color temperatures of 4100K and 5600K, the lleSeries offers four different lens options and three control options.
Other color temperatures and lens options are available on request.
The Lumenetix lle Series contains a passive thermal storage vessel. When activated at high ambient temperatures, the media in this vessel clamps the temperature of the LED well below its rated operating junction temperature, assuring the life rating of the LEDs. The thermal storage system is reversible.
Stored heat is conducted to ambient air when powered off. The engineered
LED mounting pads and conductive body of the lleSeries are efficient heat conduits to the housing of the fixture.
• Delivers high lumens, up to 2100 lumens per light engine
• Tilt feature (± 55°) to optimize optical efficiency
• Includes dimming circuit to work with standard non-dimming power supplies
• Integrated temperature monitor with current turn-down protection
• On board dimming available with dimming options for 0-10VDC control systems or bi-level with 24VDC Hi/Lo occupancy sensors
• Integrated bi-level dimming (50% power) using standard 24V occupant sensor
• UL Recognized Component
• Outdoor Area Lighting
• Roadway Lighting
• Highway Sign Lighting
• Wall Wash
• Wall Packs
• Flood Lights
• Recessed Linear Lights
• Outdoor Media Lighting
11.9” (302mm) L x 2.27” (58mm) H x 2” (50mm) W
Dry  or  Damp  Locations
Class  2  Input
Dry  or  Damp  Locations
Class  2   Input
Designed  in  California,  USA
Lumenetix Inc.
4742 Scotts Valley Dr.
Scotts Valley, CA 95066
877.805.7284
www.lumenetix.com
info@lumenetix.com
Revised 4.10.12
Specifications subject to change without notice

LED Color Temperature (CCT)
Typical CRI
Lens Types
Lumen Maintenance
3500K, Neutral White 4100K, Cool White 5600K, other CCTs on request
75 - Cool (5600K) and Neutral White (4100K)
85 - 3500K
Type 5 Symmetrical, Forward Throw, Type 3 Roadway, Spot and Flood
L70 lifetime = 65K hours at 700mA drive current; 50K hours at higher currents with adequate heat sinking (Please refer to the IIeSeries Thermal Design Guide)
LED Drive Current
Input Power
Cool White (5600K) Typical Flux
Neutral White (4100K) Typical Flux
3500K Typical Flux
700 mA
20 W
1740 Lm
1690 Lm
1420 Lm
Flux values shown are thermal stabilized at 65° Case Temperature.
800 mA
23 W
1860 Lm
1800 Lm
1500 Lm
900 mA
25 W
1950 Lm
1890 Lm
1590 Lm
Three IIeSeries represented in each chart
(1800 lumens per light engine)
Mounting Height = 20ft.
Grid Spacing = 20 ft
1000 mA
26 W
2100 Lm
2040 Lm
1660 Lm
Type 3
Type 5
0.1
0.1
0.25
0.1
0.5
0.25
0.5
1
0.1
0.25
0.5
0.1
1
0.25
0.5
0.1
Type 3
0.25
0.5
1
0.1
0.5
0.25
0.1
1
0.5
0.25
0.1
0.25
0.1
0.1
0.1
0.25
0.5
0.1
0.25
0.5
0.1
0.25
0.5
0.1
0.25
0.5
0.1
0.25
0.5
0.1
0.25
0.5
0.1
0.25
0.5
0.1
Type 5
0.5
0.25
0.1
0.5
0.25
0.1

LED Linear Light Engine lleSeries Specifications
Input Voltage
Input Power Required
Power Supply Classification
Power Connection
Continuous dimming options
Bi-level dimming option
Dimming control connection
24 Volts DC
Dependent on drive current, see flux table
Class 2
Pre-wired 24 inch leads (22 gauge)
100% – 2% using 0 – 10V or ext. potentiometer
24V input signal from standard occupant sensor
Pre-wired 24 inch leads (24 gauge)
Lead Color Input
Red
Black
+ 24V DC
- Ground
Bi-Level Occupant Sensor Control Option
Blue 24V Occ. Sensor
Sensing Control
Signal
0 - 10V Dimming Control Option
Purple
Grey
+ Dimming
- Dimming
+
lleSeries
0 -10V Dimmer
-
+
24V DC Driver
Bi-Level
Occupant Sensor
Occupant
Sensor
-
+
Control
Signal Input +
lleSeries
-
+
24V DC Driver

LED Linear Light Engine lleSeries Specifications
Weight
Mechanical Attachment
Operating Ambient Temperature
2.6 lb (1.2 kg)
Qty: 6 Typical fastener: 4-40 screw (not included)
-20° C to 45°C with adequate heat sinking (Please refer to the IIeSeries Thermal Design Guide)
Example: LLE 12 8 C 5R N – Linear Light Engine with 6500K, Type 5 Round Lens, No Controls
LLE Ordering
Code
LLE 12 8
Color Temperature
Code - Description
C: 5600K (100 lm/W)
C2: 5600K (120 lm/W)
N2 : 4100K (120 lm/W)
Lens Type
Code - Description
5R: Type 5 Round
4R: Forward Throw
FX: Fraen 20MM
CX: Carclo 20MM
Standard leads are 24 inches in length. Other lengths are available upon request.
Dimming Controls
Code - Description
N: None
HL: 0 to10V Dim
HB: Bi-Level
4R Lens Orientation
Code - Description
L: Facing long side
E: Facing end
Lumenetix Inc.
4742 Scotts Valley Dr.
Scotts Valley, CA 95066
877.805.7284
www.lumenetix.com
info@lumenetix.com
Revised 4.10.12
Specifications subject to change without notice