Green Air Products 24 Hour
The TSC-1 timer is a 24 hour time switch that provides accurate timing with increments up to 48 cycles per day. Easy to set and operate. The heavy plastic enclosure and aluminum back plate provide a durable and attractive housing which will never corrode of discolor from hot, cold, or humid environments.
This unit can be used independently or as part of a combination of control devices to coordinate numerous system functions. Precision synchronous clock motor provides 110v 15A control for pumps, fans, lighting, solenoids, motor relays or virtually any equipment or appliance dependent upon multiple daily operations.
LT8 - 8 Light Timer (120 or 240 V)
These time switches are designed to operate high load lighting equipment, consisting of a premium quality precision synchronous clock motor and a high amperage switching circuit. All Green Air Products controllers are housed in black anodized brush finish aluminum enclosures which will not break, chip or corrode.
They operate with a maximum combined outlet switching capacity of 40A. Plug or wire the power cord into a receptacle capable of handling the maximum total combined amperage draw of your equipment load. Make certain that the receptacle, wiring and circuit breaker are adequate and properly suited for this application. Plug lighting equipment into outlets located on each side of controller. Turn clock dial to current time of day. AM and PM is indicated by colored ring on dial face. Push trippers toward the center of the dial for "on" time and leave in the outward position for "off"' period. Timer has 96 non-detachable 15 minute on/off trippers. A typical installation of the LT8 lighting timer can be wired directly to a breaker in a service panel or via a sub panel or junction box. Electric range or dryer plugs are an optional, safe and convenient way to provide a hookup. The LT8-240 provides eight 5A 240V outlet receptacles, each capable of powering up to 1000W of lighting equipment
Dual Outlet Mechanical and Digital Timers
Both the Digital and Mechanical High Yield
Timers are programmable and both feature dual outlets which can simultaneously accommodate up to 8 LGM light bars or 4 bars and a fan, or any two devices. The DOMT mechanical timer can be set for multiple on/off times per day in 15 minute increments. The TDOD1 Digital Timer is capable of 8 different programs per day and can be set for daily use or for a multitude of different weekly programs. The digital timer has a built in battery backup to protect your programming during power interruptions.
Digital Timer
Mechanical Timer
LED Grow Master Global, LLC Bend, OR 97701/Tel: 541-504-6360/Fax 541-610-1973/www.led-grow-master.com
Copyright 2009-2010 Permission to copy, reproduce, or post electronically any LED Grow Master Global, LLC material or content is reserved