NZQA Expiring unit standard 8297 version 5 Page 1 of 3 Title Instruct clients in dry suit diving Level 6 Credits 3 Purpose People credited with this unit standard are able to instruct clients to prepare for dry suit dives and to dive wearing a dry suit. Classification Diving > Diving - Instruction Available grade Achieved Entry information Critical health and safety prerequisites Unit 8270, Instruct clients on specialist dive courses, or demonstrate equivalent knowledge and skills. Explanatory notes 1 Industry technical and safety criteria refer to dive instruction, supervision and performance being carried out in accordance with the standards, procedures and training materials of the respective dive training agency. The agency must meet or exceed the World Recreational Scuba Training Council training standards. 2 All workplace diving practice must comply with the requirements of the Health and Safety at Work Act 2015, and the Health and Safety in Employment Regulations 1995. All practice must also comply with the Accident Compensation Act 2001, AS/NZS 2299.3:2003 Occupational diving operations – Recreational industry diving and snorkelling operations and the Guidelines for Occupational Diving 2004 http://www.business.govt.nz/worksafe. 3 All training providers assessing against any instruction diving unit standard must ensure that the training is conducted by a qualified instructor currently registered with one of the listed agencies: National Association of Underwater Instructors (NAUI), Professional Association of Diving Instructors (PADI), Scuba Schools International (SSI), Confédération Mondiale des Activitiés Subaquatiques (CMAS), International Diving Educators Association (IDEA), or an equivalent, determined by Skills Active Aotearoa Limited, that meets the requirements of the World Recreational Scuba Training Council (WRSTC), the instructor must provide training in accordance with the standards and procedures of the respective training agency. Skills Active Aotearoa Limited SSB Code 101576 New Zealand Qualifications Authority 2016 NZQA Expiring unit standard 8297 version 5 Page 2 of 3 Outcomes and evidence requirements Outcome 1 Instruct clients to prepare for dry suit dives. Evidence requirements 1.1 Instruction includes assessment to ensure that the clients’ identification of dry suit construction features meets industry technical and safety criteria. Range closure, seals, valves, construction material. 1.2 Instruction includes assessment to ensure that the clients’ cleaning, drying, and storage of the dry suit incurs no damage. 1.3 Instruction includes assessment to ensure that the clients’ dry suit maintenance meets manufacturer’s specifications. 1.4 Instruction includes assessment to ensure that the clients’ selection of the dry suit and equipment meets industry technical and safety criteria. 1.5 Instruction includes assessment to ensure that the clients’ identification of dry suit emergencies and remedial procedures outlined meets industry technical and safety criteria. Range 1.6 excessive air in the suit or in the feet, dropped weight belt, flooded suit, squeeze, suit leak. Instruction includes assessment to ensure that the clients’ preparation for the dry suit dive meets industry technical and safety criteria. Outcome 2 Instruct clients to dive wearing a dry suit. Evidence requirements 2.1 Instruction includes assessment to ensure that clients are able to maintain neutral buoyancy during a dive. 2.2 Instruction includes assessment to ensure that the clients’ buoyancy is adjusted on the surface and underwater. 2.3 Instruction includes assessment to ensure that the clients’ descent is performed in a controlled manner and at a rate which meets industry technical and safety criteria. 2.4 Instruction includes assessment to ensure that the clients’ dry suit dive practice meets industry technical and safety criteria. Range access, hazards, environmental conditions, accessory equipment. Skills Active Aotearoa Limited SSB Code 101576 New Zealand Qualifications Authority 2016 NZQA Expiring unit standard Replacement information 8297 version 5 Page 3 of 3 This unit standard has been replaced by unit standard 28437. This unit standard is expiring. Assessment against the standard must take place by the last date for assessment set out below. Status information and last date for assessment for superseded versions Process Version Date Last Date for Assessment Registration 1 23 September 1996 31 December 2016 Revision 2 17 July 2001 31 December 2016 Review 3 26 July 2005 31 December 2016 Review 4 20 November 2014 31 December 2016 Rollover 5 18 August 2016 31 December 2018 Consent and Moderation Requirements (CMR) reference 0099 This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do. Please note Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment. Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards. Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards. Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMR). The CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements. Skills Active Aotearoa Limited SSB Code 101576 New Zealand Qualifications Authority 2016