i LUMINATION
Valopaa
PRODUCT
CATALOGUE
1/2014
Introduction
Luminaires
Intelligent Solutions
Modules
Applications
Product Catalogue 1/2014
Version 6.0 / 20.3.2014
© Valopaa Ltd.
Cover image:
Jyväskylä city of lights
Photograph: Jani Salonen
Contents
INTRODUCTION
Valopaa Oy - company profile
Product quality
Light distribution
LED RETROFIT
5
6
7
LED LUMINAIRES
VP1001 LED street luminaire
VP1101 LED sphere luminaire
VP1301 LED street luminaire
VP1302 LED street luminaire
VP1311 LED street luminaire
VP1401 LED street/
industrial luminaire
VP1501 LED street luminaire
VP1502 LED street luminaire
VP2101 LED ceiling luminaire
VP2221 LED bridge luminaire
VP2222 LED ceiling luminaire
VP2223 LED bridge luminaire
VP2224 LED bridge luminaire
VP2225 LED ceiling luminaire
VP2301i LED luminaire for
parking garages
VP2401 and VP2402 LED luminaire
for petrol stations
2503 industrial LED luminaire
VP3111 LED spotlight luminaire
VP3232 LED floodlight luminaire
VP3233 LED floodlight luminaire
VP3511 LED floodlight luminaire
VP8110 LED bollard ‘valoT’
VP9202 LED luminaire for retrofit
VP9203 LED luminaire for retrofit
VP9205 LED luminaire for retrofit
32
33
33
INTELLIGENT SOLUTIONS
9
10
11
12
13
14
15
16
17
18
20
21
22
23
24
25
26
27
28
29
30
31
Introduction
Intelligent LED lighting system
VPS Master unit
Multisensor unit
34
36
38
39
LIGHTING MODULES AND
COMPONENTS
Introduction
VPM LED modules
VPD drivers
40
41
43
APPLICATIONS
Street lighting
Bridge lighting
Petrol station lighting
Area lighting
Facade and accent lighting
Industrial lighting
Sport facilities and tracks
Modernization of light fixtures
45
46
47
48
49
50
51
52
Explanation of symbols
54
LED street lights
VP1001
s. 9
VP1101
s. 10
VP1301
s. 11
VP1302
s. 12
VP1311
s. 13
LED bridge lights
VP2101
s. 17
VP1401
s. 14
VP1501
s. 15
VP1502
s. 16
LED bollards
VP2221
s. 18
VP2223
s. 21
VP2224
s. 22
VP8110
s. 31
LED ceiling lights
VP1401
s. 14
VP2101
s. 17
VP2221
s. 18
VP2401
s. 25
VP2402
s. 25
VP2503
s. 26
VP2222
s. 20
VP2223
s. 21
VP2224
s.242
VP2225
s. 23
VP2301i
s. 24
LED spotlights/floodlights
VP3111
s. 27
VP3232
s. 28
VP3233
s. 29
LED retrofit solutions
VP9202
s. 32
4
VP9203
s. 33
VP3511
s. 30
LED modules
VP9205
s. 33
VPM1
s. 41
VPM2
s. 41
VPM4
s. 41
VPM5
s. 42
All Valopaa products are designed and manufactured
in Finland, and have been granted the Finnish Key
Flag origin mark.
Wide-ranging R&D know-how
The R&D team of Valopaa has a wide-range of knowhow, including lighting and optics planning, electronic
and software planning, mechanical planning and
industrial design.
The Valopaa products have been developed on
Valopaa’s own modular product platform. When
developing products and the product platform,
good lighting, high energy efficiency, maintainability,
reliability of the products, suitability to demanding
environments and efficient industrial manufacturing
are of high importance.
Introduction
WEGE-LICHT/Valopaa
LEDs go for the best
Cost efficiency over life cycle
The Valopaa products have been developed to
achieve the most economic cost for the entire life
cycle (usage years) of the product.
The cost efficiency of Valopaa products arises from
low energy usage, virtually nonexistent maintenance
costs, long lifetime and maintainability that stems
from the modular product structure and the ERP
system.
Certified LED luminaires
Valopaa endows all products with a CE marking,
indicating that the products conform with all required
standards. The Valopaa LED module structure
and a selection of the Valopaa luminaires have
been certified by SGS Fimko. In addition, all of the
connection devices in our use have been certified.
Production and cooperation network
The Valopaa production consists of product assembly
and a SMD process. The Valopaa production has
been audited by SGS Fimko, according to official
luminaire production requirements. All manufactured
products are tested in-house before packaging to
ensure the high quality of the delivered products to
our customers. All of Valopaa’s production partners
are ISO9001 certified.
Valopaa uses a comprehensive ERP system. With it,
luminaires and all components used in them can be
traced subsequently.
International research cooperation
Valopaa does research cooperation with VTT Technical
Research Centre of Finland, Aalto University (incl. the
Lighting Lab) and University of Oulu.
5
High quality, reliable and
long-lasting
The reliability and long lifetime of LED luminaires
are attained by choosing the highest quality of
LEDs, drivers, components and materials, by setting
the stress on them at an appropriate level, and by
designing the structures of the luminaires with taking
heat control into consideration.
Introduction
LED components
There is a myriad of producers of LED components
with varying levels of technical competence. Valopaa
has chosen the LUXEON Rebel LEDs, by Philips
Lumileds, as the LED components used in the VP
LED light series. These LED components have high
energy efficiency, low scale and well-known lumen
depreciation depending on the strain put on the
LEDs, very low percentage of failure, good selection
of available features, e.g. colour temperatures and
binning that stay put over lifecycle, and comprehensive
documentation based on extensive testing. Valopaa
currently uses Philips Lumileds Luxeon Z ES LEDs.
Valopaa luminaires remain competitive, since we
design and manufacture the LED circuit boards
ourselves. We keep a keen eye on the development
of LED technology and whenever components with
improved features appear, we strive to implement these
new LEDs without delay. Presently we have moved
into a new generation of LEDs, with improvements
not only in white LED luminous efficiency, but colour
consistency and rendering as well. Read more from
http://www.valopaa.com/product_technology/leds.
LED drivers and components
Valopaa uses certified LED drivers that have operating
temperature from -40˚C. Lifetime and reliability data is
available for the drivers. The luminaires are designed
to keep the temperature at low levels to ensure the
specified long lifetime.
Structure of luminaires
Failure rate of LEDs, drivers and all electronics
doubles (on average) when the temperature of the
luminaires increases by 10˚C. Therefore heat control is
an essential factor in reliability of a luminaire.
The Brighter LED
6
With the Valopaa products, the produced heat is
transferred to the ambient air through the aluminum
structures of the luminaires. Whenever necessary,
drivers are installed separately from the LED structures
in order to obtain the required lifetime. Locating the
driver away from the heat generated by the LEDs,
decreases the temperature of the driver over 20˚C,
thus making the failure interval four times longer than
if the driver was housed in the same structure with the
LEDs.
Driver situated
separately from
the LED structures
Air flowing
between the
parts
Heat sink from
the LED modules
The mechanical parts of the luminaire are made of
materials, such as aluminum and stainless steel, that
are strong enough, durable against time and hard
environments.
Maintainability
All Valopaa products are based on the same modules,
which are changeable on-site or at depots depending
on the product and the mechanic. The number of
spare parts is low because in many cases different VP
products use the same components and modules.
Every VPM module has a serial number. Essential
features such as colour temperature (bin), lumen
output and optics, are traceable with the serial number
of the LED module, and therefore, the compatibility
of the spare part can be ensured.
Light distribution
In the VP LED luminaires, every LED module has its own optical lens that produces the desired distrubution of
luminous intensity. The Eulumdat files of light distribution can be downloaded from the Valopaa website.
Lens V8. Developed especially for
general lighting. Thus, it is suitable
to lighting of e.g. industrial halls,
parking areas and underpasses. Glare
minimized.
Light beam 90°, 600 cd/module.
Lens V9. Developed especially for
general lighting. Lambertial light
distribution, 200 cd/module.
Lens V9B. Developed especially
for ceiling lighting. Well suited also
for general lighting, for indoors
as well as outdoors. The lens has
been designed to minimise glare
when luminaires are installed to low
ceilings.
Lens V9D. Developed especially
for general lighting, and is thus well
suited for garden and park lighting.
It is also well suited for retrofit
installations. The lens generates a
very wide round light beam.
Introduction
Optics for general lighting
Lens V15. Developed especially for
floodlights in area lighting.
Asymmetric light distribution.
Optics for spotlighting
Lens V10. Developed especially for
accent and spotlighting.
Light beam 35°, 2000 cd/module.
Lens V7. Developed for use in
spotlighting and accent lighting.
Light beam 20°, 5000 cd/module.
Optics for street lighting
Lens V11. Developed especially
for lighting of narrow streets. Best
applicable for pedestrian streets and
roads at residential areas, where light
pollution is to be avoided.
Lens V14. Developed especially for
lighting of streets.
Asymmetric light distribution
produces a more even light to the
street and less glare.
Lens V12. Developed especially
for lighting of typical residential
streets. Asymmetric light distribution
produces a more even light to the
street and less glare. Well suitable
also for lighting of parking areas.
Specialty optics
Lens V13. Developed especially for
lighting of signs and billboards.
Custom lenses. New optics can be developed for
custom projects.
We reserve the right to make changes.
7
LED LUMINAIRES
Luminaires
8
VP1001 LED street luminaire
230 V
50 Hz
Options:
i
4000 K
IP65
RAL9010
3 x 2,5
mm2
RAL7024
RAL9006
DALI
1-10V
-o
350 mA
T=25˚C
a
Luminaires
Standard:
VP1001 luminaire series has been developed for urban street and area lighting.
The nice round shape and the wide colour options enable the luminaire to be
used in various surroundings. Installations either on poles, horizontal arma or by
wire hanging.
The power range of VP1001 product family is from 40W up to 70W.
VP1001 LED street luminaire is also available with the Valopaa intelligent
lighting system, where the quantity of light can be adjusted.
VP1001 is a long lasting, energy efficient and modern street luminaire in which
functionality and intelligence create a beautiful and harmonic entity.
Technical properties
VP1001 M4
VP1001 M6
VP1001 M8
VP1001i M4
VP1001i M6
VP1001i M8
Input power
39 W
53 W
70 W
0, 9 - 39 W
0, 11 - 53 W
0, 16 - 70 W
Useful quantity of light
3800 lm
5700 lm
7600 lm
0, 700 3800 lm
0, 1100 5700 lm
0, 1400 7600 lm
Power ratio
According to standard EN 61000-3-2.
Operating temperature
-40…+55 °C (-40…+130F)
Measurements
Ø 500 mm, h 355 mm.
Materials
Metalwork anodised / painted (stoved) aluminium and stainless steel.
Fastening
Ø 60 mm pole, horizontal arm or wire hanging
LED lumen maintenance
Typically less than 10%/100 000 h
Compensated.
We reserve the right to make changes.
9
VP1101 LED sphere luminaire for streets
Standard:
230 V
50 Hz
4000 K
IP43
RAL9006
Options:
700 mA
T=15˚C
a
i
DALI
1-10V
3 x 2,5
mm2
-o
350 mA
T=25˚C
a
VP1101 is designed as a traditional sphere luminaire, but it is equipped with the latest LED technology. The
luminaire illuminates streets, parks, bridges and yards. The luminaire is mounted pointing downwards onto
a Ø 60 mm arm or onto a pole.
Luminaires
Technical properties
10
VP1101 M4
VP1101i M4
Input power
39 W
0, 9 - 69 W
Useful quantity of light
3800 lm
0, 1000 - 6500 lm
Power ratio
> 0,9c
Operating temperature
-40…+50 °C (-40…+122 F)
Measurements
Diameter of the opal 400mm or 500mm
Materials
Grey painted aluminum, anodised aluminum, cast aluminum column bracket. Opal diffuser,
prismatic or clear impact-resistant polycarbonate.
Fastening
Ø 60 mm horizontal arm or top of pole installation.
LED lumen maintenance
Typically less than 10%/100 000 h
Compensated.
We reserve the right to make changes.
VP1301 LED street luminaire
Standard:
Options:
230 V
50 Hz
4000 K
RAL9003
RAL9005
IP65
i
RAL9006
3 x 2,5
mm2
DALI
1-10V
-o
350 mA
T=25˚C
a
700 mA
T=15˚C
a
The installation angle can be adjusted by 5° steps with the help of a hinge. The VP1301 product family includes
luminaires with the light amounts ranging up to 15200 lumen. The VP1301 is also suitable to area lighting with
the appropriate optics.
The VP1301 LED street luminaire is also available
with the intelligent lighting system in which the
quantity of light can be adjusted.
Luminaires
The VP1301 LED street luminaire product family has been designed for lighting roads and streets. The luminaire
has been approved by the Finnish Transport Agency. It is suited for new installations, as well as replacing old
luminaires. The luminaire can be installed on horizontal and vertical shafts.
Technical properties
VP1301 M6
Input power (350
mA) (1) 53 W
Technical
properties
VP1301 M8
VP1301 M12
VP1301 M16
70 W
101 W
132 W
11400 lm
15200 lm
VP1301i M6
VP1301i M8
Useful quantity of light
5700 lm
7600 lm
Input power (700 mA) (2)
Useful quantity of light
105 W
138 W
0, 11-103 W
0, 16-137 W
9750 lm
13000 lm
0,1400 9750 lm
0, 1800 13000 lm
Pover ratio
According to standard EN 61000-3-2.
Operating temperature
-40…+40 °C (-40…+100 F)
Measurements,
lxwxh
620 x 170 x
125 mm
630 x 170 x
125 mm
620 x 223 x
125 mm
630 x 223 x
125 mm
620 x 170 x
125 mm
630 x 170 x
125 mm
Weight
5 Kg
5,5 Kg
6,5 Kg
7 Kg
5 Kg
5,5 Kg
Materials
Metalwork painted (stoved) aluminium and stainless steel.
Fastening
Ø 59-63 mm tube, vertical and horizontal installation, fine-tuning in 5° steps.
Wiring with spring coupling, overhead cables also possible.
Led lumen maintenance
Typically less than 10%/100 000 h (1), 10%/50 000 h (2).
The intelligent lighting system
compensates the lumen
depreciation.
We reserve the right to make changes.
11
VP1302 LED street luminaire
Standard:
Options:
230 V
50 Hz
4000 K
IP65
RAL7024
3 x 2,5
mm2
RAL9003
RAL9005
i
DALI
1-10V
-o
350 mA
T=25˚C
a
The VP1302 street luminaire has been developed for street and area
lighting. It is also suitable to e.g. lighting of sports tracks. The luminaire is
available in both one-sided and two-sided versions.
Luminaires
The luminaire is suited for new installations, as well as replacing old
luminaires. The luminaire can be installed to an upright pole, the one-sided
version also to horizontal shafts. The installation angle can be adjusted in 5°
steps with the help of a hinge.
The VP1302 LED street luminaire is available in one-sided and
two-sided versions, and in all different combinations (e.g. M2 + M2, M2 + M4 ...)
Technical properties
VP1302
M2
VP1302
M3
VP1302
M4
VP1302
M6
VP1302i
M4
VP1302i
M6
VP1302
M2+M6
VP1302i
M6+M6
Input power
22 W
30 W
39 W
53 W
0, 9 69 W
0, 11 103 W
70 W
0, 17 147 W
Useful quantity of light
1900 lm
2850 lm
3800 lm
5700 lm
0, 1000 6500 lm
0, 1400 9750 lm
1900 lm +
5700 lm
2 x 0,
1100 7500 lm
Power ratio
> 0,9c
According to standard EN 61000-3-2.
Operating temperature
-40…+40 °C (-40…+100 F)
Measurements, l x w x h
Visor:
Pole adaptor:
228 x 172
x 50 mm
334 x 172
x 50 mm
440 x 172
x 50 mm
h 420, Ø 80
Materials
Metalwork painted (stoved) aluminium and stainless steel.
Fastening
60 mm tube, vertical (and horizontal) installation, fine-tuning in 5° steps.
LED lumen maintenance
Typically less than 10%/100 000 h
281 x 172
x 50 mm
334 x 172
x 50 mm
440 x 172
x 50 mm
Compensated.
NB! Luminaires are available in one-sided and two-sided versions, and in all different combinations in addition to
those presented in the table above.
We reserve the right to make changes.
12
NE
W
OD
VP1311 LED street luminaire
Standard:
Options:
230 V
50 Hz
i
4000 K
IP66
RAL7024
RAL9010
DALI
1-10V
3 x 2,5
mm2
-o
PR
UC
T
350 mA
T=25˚C
a
The VP1311 LED street luminaire family is developed for roads, streets
and parking area lighting. The luminaire can be installed to an upright
pole or to a horizontal shaft.
Luminaires
VP1311 luminaire suits hot atmospheres very well, due its unique sun
protection cover on the luminaire. The air circulates between the cover,
the LED modules and driver, thus, cooling down the luminaire. The
LED modules are covered with a tempered front glass to ensure better
encapsulation.
The luminaire is also available with Valopaa’s intelligent dimmable
lighting system.
Technical properties
VP1311 M4
VP1311 M6
VP1311 M8
VP1311i M4
VP1311i M6
VP1311i M8
Input power
39 W
53 W
70 W
0, 9 - 69 W
0, 11 - 103 W
0, 16 - 137 W
Useful quantity of light
3800 lm
5700 lm
7600 lm
0, 1000 6500 lm
0, 1400 9750 lm
0, 1800 13000 lm
Power ratio
According to standard EN 61000-3-2.
Operating temperature
-40…+55 °C (-40…+130F)
Measurements, l x w x h
540 x 327 x 84 mm
Materials
Metalwork painted (stoved) aluminium and stainless steel.
Fastening
Ø 60 mm tube, vertical and horizontal installation.
LED lumen maintenance
Typically less than 10%/100 000 h in 25 °C or
less than 10% /60 000h in 50 °C (L90 is 60 000h)
Compensated.
We reserve the right to make changes. Preliminary data, as new product.
13
VP1401 LED street luminaire
Standard:
Options:
230 V
50 Hz
4000 K
RAL9003
RAL9005
IP65
RAL9006
5 x 2,5
mm2
i
DALI
1-10V
-o-
F
350 mA 700 mA
T=25˚C
T=15˚C
a
a
VP1401 LED luminaires have been developed for street lighting, mounted on a wire rope over a road. The
luminaires are available in different output capacities, and as part of the Valopaa Intelligent LED Lighting
System.
Luminaires
The luminaires can also be used as a high bay luminaire in industrial lighting by selecting a suitable optical
distribution. The luminaire is installed to the ceiling of an industrial hall on wire rope or directly to ceiling with
an adaptor (available as accessory).
VP1401 M8 LED street light
VP1401 M16 LED street light
Technical properties
VP1401 M4
VP1401 M8
VP1401 M16
VP1401i M4
VP1401i M8
VP1401i M16
Input power
39 W (1)
72 W (2)
70 W (1)
138 W (2)
132 W (1)
276 W (2)
0, 9 - 69 W
0, 16 - 137 W
0, 32 - 274 W
Useful quantity of light
3800 lm (1)
6500 lm (2)
7600 lm (1)
13000 lm (2)
15200 lm (1)
26000 lm (2)
0, 1000 6500 lm
0, 1800 13000 lm
0, 3600 26000 lm
Power ratio
According to standard EN 61000-3-2.
Operating temperature
-40…+50 °C (-40…+122 F) (1), -40…+40 °C (-40…+100 F) (2)
Measurements, l x w x h
M4/M8: 575 x 301 x 209 / 321 mm (height without/with fastening part)
M16: 610 x 380 x 195/307 mm
Materials
Metalwork painted (stoved) aluminium and stainless steel
Fastening
Cable wire, or directly onto ceiling with adaptor (sold as accessory)
LED lumen maintenance
Typically less than 10%/100 000 h (1),
10%/50 000 h (2).
Compensated.
VP1401 LED luminaires are available with 350mA (1) or 700mA (2) LED current.
14
We reserve the right to make changes.
NE
W
OD
VP1501 LED street luminaire
Standard:
230 V
50 Hz
4000 K
IP65
RAL9010
Options:
i
DALI
1-10V
IP66
3 x 2,5
mm2
-o
PR
UC
T
350 mA
T=25˚C
a
The product family of VP1501 street lights is developed for
major roads, streets and area lighting.
Luminaires
The luminaire is suited for new installations as well as for
replacement of old light fixtures. The luminaire can be installed
to an upright pole or to horizontal shaft. The installation angle
can be adjusted in 5° steps by adjusting the angle of led
modules.
VP1501 luminaires suits hot atmospheres very well, due to its
unique sun protection cover on the luminaire. The air circulates
between the cover, the LED modules and driver, thus, cooling
down the luminaire. Optionally, the driver can be installed onto
the pole to keep temperatures down in hot conditions.
Technical properties
VP1501 M4
VP1501 M8
VP1501 M12
VP1501 M16
VP1501i M8
Input power
39 W
70 W
101 W
132 W
0, 16 - 137 W
Useful quantity of light
3800 lm
7600 lm
11400 lm
15200 lm
0, 1800 13000 lm
Power ratio
According to standard EN 61000-3-2.
Operating temperature
-40…+50 °C (-40…+122 F)
Measurements, w x l x h
626 x 535 x 137 mm
Materials
Metalwork painted (stoved) aluminium and stainless steel.
Fastening
To vertical or horizontal pole, fine-tuning in 5° steps.
LED lumen maintenance
Typically less than 10%/100 000 h in 25 °C or
less than 10% /60 000h in 50 °C (L90 is 60 000h)
-40…+40 °C
(-40…+100 F)
709 x 535 x 137
626 x 535 x 137
Compensated.
We reserve the right to make changes. Preliminary data, as new product.
15
NE
W
OD
VP1502 LED street luminaire
Standard:
Options:
230 V
50 Hz
4000 K
RAL9003
RAL7024
IP65
i
RAL9006
3 x 2,5
mm2
-o
DALI
1-10V
IP66
PR
UC
T
350 mA
T=25˚C
a
Luminaires
The VP1502 LED street luminaire is developed for major
roads, streets and area lighting. The luminaire can be
installed to horizontal shaft or to an upright pole with an
optional adapter. The installation angle can be adjusted in 5°
steps by adjusting the angle of the led modules.
VP1502 luminaires suits hot atmospheres very well, due to
its unique sun protection cover on the luminaire. The air
circulates between the cover, the LED modules and driver,
thus, cooling down the luminaire. Available with tempered
front glass to ensure better encapsulation.
The luminaire is also available with Valopaa’s intelligent
dimmable lighting system.
Technical properties
16
VP1502 M4
VP1502 M8
VP1502 M12
VP1502 M16
VP1502i M4
VP1502i M8
Input power
39 W
70 W
101 W
132 W
0, 9 - 69 W
0, 16 - 137 W
Useful quantity of light
3800 lm
7600 lm
11400 lm
15200 lm
0, 1000 6500 lm
0, 1800 13000 lm
Power ratio
According to standard EN 61000-3-2.
Operating temperature
-40…+50 °C (-40…+122 F)
Measurements, w x l x h
573 x 340 x 88 mm
Materials
Metalwork painted (stoved) aluminium and stainless steel.
Fastening
To vertical or horizontal pole, fine-tuning in 5° steps.
LED lumen maintenance
Typically less than 10%/100 000 h in 25 °C or
less than 10% /60 000h in 50 °C (L90 is 60 000h)
-40…+40 °C (-40…+100 F)
Compensated.
We reserve the right to make changes. Preliminary data, as new product.
NE
W
OD
VP2101 LED ceiling luminaire
Options:
230 V
50 Hz
RAL9003
4000 K
IP66
RAL9006
i
DALI
1-10V
5 x 2,5
mm2
-o-
350 mA 700 mA
T=15˚C
T=25˚C
a
a
UC
T
F
The VP2101 LED ceiling luminaire has been designed to be used in lighting of e.g. underpasses of walkways
and roads, undersides of bridges, parking garages, canopies and industrial buildings. The luminaire is recessed,
i.e. it is mounted with only the front panel and the light emitting lens of the LED modules are left visible under
the ceiling structure. All the other parts of the luminaire are inside the ceiling structure. The LED modules,
driver and the front cover are changeable.
Luminaires
Standard:
PR
Technical properties
VP2101 M2
VP2101 M2 low glare
VP2101 M3
VP2101i M4
Input power
20 W (1) / 36 W (2)
20 W (1)
29 W (1)
0, 9 - 69 W (2)
Useful quantity of light
1600 lm (1) / 3300 lm (2)
1600 lm (1)
2700 lm (1)
0, 1000 - 6500 lm (2)
Power ratio
> 0,9
Operating temperature
-40…+40 °C (-40…+100 F)
Measurements, w x l x h
380 x 430 x 100 mm (S) / 620 x 450 x 60 (L)
Materials
Metalwork painted aluminium and stainless steel.
Front cover 6mm polycarbonate, with diffusing lining.
Fastening
Screw fastening to ceiling material.
LED lumen maintenance
Typically less than 10%/100 000 h (1), 10%/50 000 h (2).
Compensated.
VP2101 LED luminaires are available with 350mA (1) or 700mA (2) LED current.
We reserve the right to make changes. Preliminary data, as new product.
17
VP2221 LED bridge luminaire
Standard:
Options:
230 V
50 Hz
4000 K
RAL9003
RAL9005
IP65
RAL9006
5 x 2,5
mm2
-o-
F
350 mA
T=25˚C
a
The VP2221 LED bridge light is designed as a ceiling luminaire for underpasses of walkways and roads, bridge
structures, parking garages, and building canopies. The luminaire is mounted recessed; only the exothermic
panel and the light-emitting lens of the LED modules are left visible from under the ceiling structure. All the
other parts of the luminaire are left inside the ceiling structure. The luminaire is structurally durable and safe.
Luminaires
Technical properties
VP2221 M1
VP2221 M2
VP2221 M3
VP2221 M4
VP2221 M6
Input power
11 W
22 W
33 W
44 W
53 W
Useful quantity of light
950 lm
1900 lm
2850 lm
3800 lm
5700 lm
Power ratio
> 0,9c
Operating temperature
-40…+40 °C (-40…+100 F)
Measurements,
l x w x h (mm)
S: 200 x 200 x 60
S: 400 x 200 x 60
L: 620 x 450 x 60
L: 620 x 450 x 60
According to standard EN 61000-3-2.
620 x 450 x 60
620 x 450 x 60
620 x 450 x 60
Measurements of versions suitable with the flush mounting frame, see page 19.
18
Materials
Metalwork painted (stoved) aluminium and stainless steel.
Fastening
Screw fastening to ceiling material.
LED lumen maintenance
Typically less than 10%/100 000 h.
We reserve the right to make changes.
a
d
b
c
e
f
h
g
b
c
d
e
f*
g*
h*
M1 S
160 mm
68 mm
200 mm
93 mm
200 mm
min. 100 mm
170 mm
100 mm
M2 S
360 mm
68 mm
400 mm
93 mm
200 mm
min. 100 mm
370 mm
100 mm
M1 L,
M2 L,
M3 - M6
415 mm
68 mm
620 mm
201 mm
450 mm
min. 100 mm
430 - 540 mm
220 - 370 mm
Luminaires
a
* In addition, note the space required for the wiring on the sides.
Flush mounting frame
The VP2221 LED luminaires can be installed to the underside of bridges with this flush mounting frame at new
bridge building sites. With the aid of this installation case, the electrical tubing will be easier and wooden
molds for the luminaires are no longer needed. The luminaires can be easily installed into the case after the
bridge building is finished.
The frame has knockouts for M25 pipe fitting on each side, in order to enable tubing in a simple way. The
package contains two pieces of pipe fittings. Available in three sizes, suitable for each version of VP2221 LED
luminaire.
Technical properties
Frame S
Frame L
Measurements, l x w x h
204 x 204 x 128 mm
304 x 504 x 128 mm
Materials
Stainless steel
Suitable VP2221 LED luminaires:
Frame S
Frame L
Suitable versions of the
VP2221 LED luminaire
M1
M1, M2, M3, M4, M6
Measurements, l x w
200 x 200 mm
300 x 500 mm
Colour
Aluminium
We reserve the right to make changes.
19
VP2222 LED ceiling luminaire
Standard:
Options:
230 V
50 Hz
4000 K
RAL9003
RAL9005
IP34
RAL9006
5 x 2,5
mm2
-o-
F
350 mA
T=25˚C
a
i s
VP2222 LED ceiling luminaires have been developed to be used as ceiling luminaires in cold roofed spaces
or industrial spaces, where changing e.g. fluorescent lamps is difficult and might interrupt production. The
luminaires are suited for new installations, as well as replacing old luminaires.
Luminaires
The VP2222 LED luminaire has succesfully been used in loading platforms, cold storage, truck scaling areas and
numerous industrial sites.
VP2222 LED ceiling luminaire is also available as an intelligent option of the Valopaa Intelligent LED Lighting
System.
Technical properties
20
VP2222 M3
VP2222 M6
VP2222i M6
Input power
33 W
53 W
0, 11 - 78 W
Useful quantity of light
2850 lm
5700 lm
0, 1000 - 7200 lm
Power ratio
> 0,9c
According to standard EN 61000-3-2.
Operating temperature
-40…+40 °C (-40…+100 F)
Measurements, l x w x h
604 x 165 x 51 mm
Materials
Metalwork painted (stoved) aluminium and stainless steel.
Fastening
Screw fastening to ceiling or rail.
LED lumen maintenance
Typically less than 10%/100 000 h.
1300 x 170 x 72 mm
1000 x 165 x 86 mm
Compensated.
We reserve the right to make changes.
VP2223 LED bridge luminaire
Standard:
Options:
230 V
50 Hz
4000 K
RAL9003
RAL9005
IP44
RAL9006
5 x 2,5
mm2
-o-
350 mA
T=25˚C
a
F
Luminaires
The VP2223 LED bridge luminaire is designed for use as a ceiling luminaire in e.g. underpasses, bridges,
tunnels, parking garages, building canopies and industrial buildings. The luminaire is surface-mounted to
the ceiling structure. The front panel of the luminaire is hinged to the back, which is fastened to the ceiling
structure. This makes it easier to install the luminaire and make the electrical connections. Electrical wiring can
be brought into the luminaires either from two sides or from the back, and the wiring can be done in series.
The VP2223 LED luminaire is available in three different colors and in four
different efficiencies and sizes. The luminaires in the pictures are equipped with
vandalism shields (available as accessories).
Technical properties
VP2223 M1
VP2223 M2
VP2223 M3
VP2223 M4
Input power
11 W
22 W
33 W
44 W
Useful quantity of light
950 lm
1900 lm
2850 lm
3800 lm
Power ratio
> 0,9c
Operating temperature
-40…+40 °C (-40…+100 F)
Measurements, w x l x h
200 x 200 x 47 mm
400 x 200 x 47 mm
400 x 400 x 47 mm
Materials
Metalwork painted (stoved) aluminium and stainless steel.
Fastening
Screw fastening to ceiling structure
LED lumen maintenance
Typically less than 10%/100 000 h
400 x 200 x 47 mm
Accessories
Vandalism shield. Installed on top of the LED module and optical lens to protect
against mischief and vandalism. Protects from spray paints and decreases the risk of
mechanical strain and damage. UV protected polycarbonate. Seal included in the
package.
We reserve the right to make changes.
21
VP2224 LED bridge luminaire
Standard:
Options:
230 V
50 Hz
4000 K
RAL9003
RAL9005
IP65
RAL9006
5 x 2,5
mm2
-o-
F
350 mA
T=25˚C
a
Luminaires
The VP2224 LED luminaire is an IP65 rated ceiling luminaire. It is designed for use in demanding outdoor
installations due its high IP rating. It suits perfectly for use as a ceiling luminaire in e.g. underpasses of walkways
and roads, bridge undersides, tunnels, parking garages, canopies and industrial buildings. The luminaire is
mounted on the surface of the ceiling structure. The front panel of the light fixture is hinged to the back part,
which is fastened to the ceiling structure. This makes it easier to install the luminaire and make the electrical
connections. Electrical cabling can be brought to the luminaires either from two sides or from the back, and the
cabling can be chained.
The VP2224 LED luminaire is available in three different colors and in four different power levels and sizes.
Technical properties
22
VP2224 M1
VP2224 M2
VP2224 M3
VP2224 M4
Input power
11 W
22 W
33 W
44 W
Useful quantity of light
950 lm
1900 lm
2850 lm
3800 lm
Power ratio
> 0,9c
Operating temperature
-40…+40 °C (-40…+100 F)
Measurements, l x w x h
390 x 258 x 95 mm
590 x 258 x 95 mm
590 x 258 x 95 mm
Materials
Metalwork painted (stoved) aluminium and stainless steel.
Fastening
Screw fastening to ceiling structure
LED lumen maintenance
Typically less than 10%/100 000 h
590 x 258 x 95 mm
We reserve the right to make changes.
NE
W
OD
VP2225 LED luminaire
Standard:
Options:
230 V
50 Hz
4000 K
RAL9003
RAL9005
IP65
RAL9006
i s
3 x 2,5
mm2
-o-
DALI
1-10V
PR
350 mA 700 mA
T=15˚C
T=25˚C
a
a
UC
T
F
Luminaires
The VP2225 LED luminaire product family is suitable for canopies, industrial halls, warehouses, cold stores
etc. The installation of the luminaire is surface-mounted onto the ceiling or lighting rail. The luminaires are
equipped with Wieland quick connectors for serial wiring and connection. The fastening part enables changing
the angle of the luminaire. The VP2225 LED luminaire is also available as an intelligent option of the Valopaa
Intelligent LED Lighting System.
Technical properties
VP2225 M8
VP2225i M8
Input power
70 W (1) / 138 W (2)
0, 16 - 137 W
Useful quantity of light
7600 lm (1) / 13000 lm (2)
0, 1800 - 13000 lm
Power ratio
According to standard EN 61000-3-2.
Operating temperature
-40…+40 °C (-40…+100 F)
Measurements, l x w x h
1160 x 120 x 80 mm
Materials
Metalwork painted (stoved) aluminium and stainless steel.
Fastening
Screw fastening to ceiling or rail.
LED lumen maintenance
Typically less than 10%/100 000 h (1),
10%/50 000 h (2)
Compensated.
VP2225 LED luminaires are available with 350mA (1) or 700mA (2) LED current.
We reserve the right to make changes. Preliminary data, as new product.
23
NE
W
OD
VP2301i LED luminaire for
parking garages
-oi s
Standard:
Options:
230 V
50 Hz
RAL9003
350 mA 700 mA
T=15˚C
T=25˚C
a
a
4000 K
IP65
DALI
1-10V
RAL9006
PR
UC
3 x 2,5
mm2
Luminaires
The VP2301i intelligent LED luminaire is designed for the lighting of parking garages and canopies. It is also
well suited for industrial buildings and warehouses. Due to its small size, it is an excellent choice for numerous
targets where small size and slim structures are needed. Multiple lighting elements at even intervals creates
smooth and efficient illumination. The optical lens is carefully chosen based on the illuminated area or object,
i.e. the light beam of the element can be directed precisely as needed. Up to twelve lighting elements can
be connected to one driver unit. The VP2301i LED luminaire for parking garages complements the range of
intelligent luminaires. Intelligent sensors can be added to the system to reach maximal energy efficiency. The
driver unit includes a motion detector.
Quick installation with plug
and play connectors
Technical properties
VP2301i 4xM1
VP2301i 6xM1
VP2301i 8xM1
VP2301i 12xM1
Input power
0, 9 - 69 W
0, 11 - 103 W
0, 16 - 137 W
0, 17 - 147 W
Useful quantity of light
0, 1000 - 6500 lm
0, 1400 - 9750 lm
0, 1800 - 13000 lm
0, 2150 - 15000 lm
One lighting element; max 1600lm
Power ratio
According to standard EN 61000-3-2.
Operating temperature
-40…+40 °C (-40…+100 F)
Measurements, l x w x h
171 x 78 x 27 mm (one lighting element)
Materials
Metalwork painted (stoved) or anodised aluminium
Fastening
Screw fastening to rail (heat is transfered partially to the rail)
LED lumen maintenance
Compensated
Accessories
24
Fastening accessories. Fastening of one lighting element requires 2 screws and
2 special nuts.
We reserve the right to make changes. Preliminary data, as new product.
T
LED luminaires for petrol stations
Standard:
Options:
230 V
50 Hz
IP65
RAL9005
RAL9006
4000 K
RAL9003
i s
5 x 2,5
mm2
-o-
DALI
1-10V
F
350 mA 700 mA
T=25˚C
T=15˚C
a
a
Heat control is very important in LED luminaires. Within this construction it is achieved a good thermal
efficiency and constancy of light output. LED modules and drivers are changeable and encapsulated dust and
waterproof.
recessed VP2401is M8
Luminaires
The VP2401 and VP2402 LED luminaires are designed for use as ceiling luminaires for canopy lighting at petrol
stations. The VP2401 luminaires are mounted recessed, where the luminaire is mounted to the slot in a way that
only the exothermic panel and the LED modules are left visible under the ceiling structure. Model VP2402 is for
surface mounting.
surface - mounted VP2402is M8
Technical properties
Recessed
VP2401 M4
VP2401 M6
VP2401 M8
VP2401 (is) M6
VP2401 (is) M8
Surface-mounted
VP2402 M4
VP2402 M6
VP2402 M8
VP2402 (is) M6
VP2402 (is) M8
Operating voltage
230VAC/50Hz, protection class I
Input power
44 W (1) /
72 W (2)
53 W (1) /
105 W (2)
70 W (1) /
138 W (2)
0, 11-103 W (is)
0, 16-137 W (is)
Useful quantity of
light
3800 lm (1) /
6500 lm (2)
5700 lm (1) /
9750 lm (2)
7600 lm (1) /
13000 lm (2)
0, 1400 - 9750 lm (is)
0, 1800 - 13000 lm (is)
LED lumen
maintenance
Typically less than 10%/100 000h (1),
20%/ 100 000 (2).
Power ratio
According to standard EN 61000-3-2.
Operating
temperature
-40...+40 ºC (-40…+100 F)
Measurements,
lxwxh
515 x 515 x 100 mm (recessed)
405 x 416 x 120 mm (surface-mounted)
Materials
Metalwork painted (stoved) aluminium and stainless steel.
Fastening
Screw fastening to ceiling material.
is-model compensated.
VP2401 and VP2402 LED luminaires are available with 350mA (1) or 700mA (2) LED current.
We reserve the right to make changes.
25
NE
W
VP2503 industrial LED luminaire
Standard:
Options:
230 V
50 Hz
4000 K
RAL9003
RAL7024
IP44
RAL9006
5 x 2,5
mm2
-o-
700 mA
T=15˚C
a
i
DALI
1-10V
IP66
PR
OD
UC
F
Luminaires
VP 2503 has been designed as a powerful and reliable ceiling luminaire for sports facilities, industrial halls and
warehouses. All electronics and connecting devices have been placed out of the heating range of the LEDs
in order to ensure long lifetimes also in warm conditions. The luminaire is mounted on a wire rope, or directly
to ceiling, wall or rail with the shaft. The luminaire is also available with tempered front glass to ensure better
encapsulation.
Technical properties
26
VP2503
M8
VP2503
M16 (S)
VP2503
M16 (L)
VP2503
M32
VP2503i
M8
VP2503i
M16 (S)
VP2503i
M16 (L)
VP2503i
M32
Input power
138 W
276 W
276 W
552 W
0, 16 137 W
0, 32 274 W
0, 32 274 W
0, 64 548 W
Useful quantity of light
13000 lm
26000 lm
26000 lm
52000 lm
0, 1800 13000 lm
0, 3600 26000 lm
0, 3600 26000 lm
0, 7200 52000 lm
Power ratio
According to standard EN 61000-3-2.
Encapsulation
IP44 / IP66 version available upon request
Operating temperature
-40…+40 °C (-40…+100 F)
Measurements, l x w x h
470 x 430 x 90/140
mm
Materials
Metalwork painted (stoved) aluminium and stainless steel
Fastening
Screw fastening to ceiling, wall or rail, or hanging from a wire rope
LED lumen maintenance
Typically less than 10%/50 000 h
940 x 430 x 90/140
mm
470 x 430 x 100/150
mm
940 x 430 x 90/140
mm
We reserve the right to make changes. Preliminary data, as new product.
T
VP3111 LED spotlight luminaire
Options:
230 V
50 Hz
4000 K
RAL9003
RAL9005
IP65
RAL9006
3 x 2,5
mm2
-o-
350 mA
T=25˚C
a
The product family of VP3111 LED spotlights has been developed for spotlighting and lighting pedestrian
routes. The VPM1 LED module is used in the VP3111, thus making all Valopaa lenses available. By choosing
lenses that are developed for street lighting, safe pedestrian paths and unique lighting to courtyards can
be obtained. The light source is rotatable, it can be turned at the pole top, and the light can be aligned as
needed.
The VP3111 LED spotlight is available in one-module and two-module versions. The two LED modules in
the VP3111 M2 can be directed adjacently to generate a higher luminous efficiency, or vertically pointing to
different directions to generate a wider lighted area.
VP3111 M1
Luminaires
Standard:
VP3111 M2
The VP3111 LED spotlight is fastened a 60 mm pole. The electricity is brought to the luminaire through the
pole. The connection device is inside the pole. The product design removes the excess heat effectively from
LEDs and the whole structure is dust and waterproof.
Technical properties
VP3111 M1
VP3111 M2
Input power
11 W
22 W
Useful quantity of light
950 lm
1900 lm
Power ratio
> 0,9c
Operating temperature
-40…+40 °C (-40…+100 F)
Measurements, l x w x h
120 x 70 x 70 mm
180 x 110 x 90 mm
Weight
1 kg
1,5 kg
Materials
Metalwork anodised or painted aluminium, and stainless steel.
Fastening
60 mm tube (tube not included in the standard package).
LED lumen maintenance
Typically less than 10%/100 000 h.
We reserve the right to make changes.
27
VP3232 LED floodlight luminaire
Standard:
Options:
230 V
50 Hz
4000 K
RAL9003
RAL9005
IP44
RAL9006
5 x 2,5
mm2
-o-
350 mA
T=25˚C
a
F
The VP3232 LED floodlight luminaire has been developed for spotlighting and area lighting. The luminaire
lightens up courtyards, parks, buildings and other objects. It is installed by screws to ceilings, walls or poles.
The installation angle is fully adjustable, so that the light can be aligned as needed.
Luminaires
The LED floodlight luminaires are suited to both indoor and outdoor use. Available also with pre-installed
power cables, making the floodlights easy to use and move as needed, e.g. at construction sites.
Technical properties
VP3232 M1
28
Input power
11 W
Useful quantity of light
950 lm
Power ratio
> 0,9c
Operating temperature
-40…+40 °C (-40…+100 F)
Measurements, l x w x h
190 x 90 x 90/130 mm (height: without/with shaft)
Materials
Metalwork painted (stoved) aluminium and stainless steel
Fastening
Screw fastening to ceiling, wall or pole
LED lumen maintenance
Typically less than 10%/100 000 h
We reserve the right to make changes.
VP3233 LED floodlight luminaire
Standard:
Options:
230 V
50 Hz
4000 K
RAL9003
RAL9005
IP65
RAL9006
5 x 2,5
mm2
-o-
350 mA
T=25˚C
a
F
Luminaires
The VP3233 LED floodlight luminaire has been developed for area and staircase lighting. The floodlights can
also be used as work lights when supplied with electrical cords. The luminaires are installed with screws or
U-bolts to walls or poles. Can also be utilised in street lighting by wire rope hanging or installing to bridge
structures. Serial electrical wiring is possible.
The VP3233 is particularly fit for outdoor use thanks to the high IP65 rating.
Technical properties
VP3232 M1
Input power
11 W
Useful quantity of light
950 lm
Power ratio
> 0,9c
Operating temperature
-40…+40 °C (-40…+100 F)
Measurements, l x w x h
195 x 95 x 100 mm
Materials
Metalwork painted (stoved) aluminium and stainless steel
Fastening
Screw fastening to ceiling, wall or pole
LED lumen maintenance
Typically less than 10%/100 000 h
We reserve the right to make changes.
29
NE
W
VP3511 LED floodlight luminaire
Standard:
Options:
230 V
50 Hz
4000 K
IP65
RAL9003
RAL9005
RAL9006
RAL7024
5 x 2,5
mm2
-o-
i
DALI
350 mA 700 mA
T=25˚C
T=15˚C
a
a
1-10V
PR
OD
UC
F
IP66
The V3511 LED floodlight luminaire has been developed for spotlighting and area lighting. The luminaire
lightens up courtyards, parks, buildings and other objects. It is attached with screws to ceilings, walls or poles.
The installation angle is fully adjustable and the luminaire can be aligned as needed. The luminaire can also be
utilised in street lighting by wire rope hanging or installing to bridge structures.
Luminaires
The LED floodlight luminaires are suited to
both indoor and outdoor use. Available also
with pre-installed power cables, making the
floodlights easy to use and move according to
needs, e.g. at construction sites.
Technical properties
VP3511 M4
VP3511 M8
VP3511 M16
VP3511i M4
VP3511i M8
VP3511i M16
Input power
39 W (1)
72 W (2)
70 W (1)
138 W (2)
132 W (1)
276 W (2)
0, 9 - 69 W
0, 16 - 137 W
0, 32 - 274 W
Useful quantity of light
3800 lm (1)
6500 lm (2)
7600 lm (1)
13000 lm (2)
15200 lm (1)
26000 lm (2)
0, 1000 6500 lm
0, 1800 13000 lm
0, 3600 26000 lm
Power ratio
According to standard EN 61000-3-2.
Operating temperature
-40…+40 °C (-40…+100 F)
Measurements, l x w x h
(height: without/with shaft)
230 x 155 x
140/228 mm
230 x 155 x
140/228 mm
378 x 155 x
140/228 mm
378 x 155 x
280/370 mm
Materials
Metalwork painted (stoved) aluminium and stainless steel
Fastening
Screw fastening to ceiling, wall or pole
LED lumen maintenance
Typically less than 10%/100 000 h (1) / 10%
50 000 h (2)
378 x 155 x
140/228 mm
378 x 155 x
280/370 mm
Compensated.
VP3511 LED floodlight luminaire is available in different versions with 350 mA (1) or 700 mA (2) LED current.
30
We reserve the right to make changes. Preliminary data, as new product.
T
valoT (VP8110) LED bollard
Standard:
Options:
230 V
50 Hz
4000 K
IP65
RAL9003
RAL9005
RAL9006
RAL7024
3 x 2,5
mm2
-o-
i
DALI
350 mA 700 mA
T=25˚C
T=15˚C
a
a
1-10V
The new valoT (VP8110) LED light bollard series is a tool for creative design in outdoor lighting. With these
bollard luminaires you can create effective and constant lighting to passageways and highlight the trunks and
crowns of trees. valoT bollard luminaires are also suitable for facade and spotlighting.
Luminaires
The series includes 3 lighting versions: one for passageways, another
for both passageways and trees; and a third version for the sole
purpose of lighting trees. Different lenses and colour temperatures
of light can be used for different purposes. The frame comes with
different height options.
The design tolerates vandalism very well
- as all Valopaa fixtures do. The bollard
can also be equipped with intelligent
motion sensors and controlled with
the Valopaa intelligent lighting control
system.
Valo T fixtures are available also for pole
installation. The fixture can be installed
to suitable metal and wooden poles.
The concept design and shape have been
created by Henrika Pihlajaniemi from
Arkkitehdit m3 Oy.
Technical properties
VP8111 (Tree/
passageway)
VP8112 (Passageway)
VP8113 (Tree)
VP8114 (2xTree +
Passageway)
Input power
Usable quantity of light
30 W (3 modules)
950 lm + 1900 lm
22 W (2 modules)
1900 lm
11 W (1 modules)
950 lm
39 W (4 modules)
2x 950 lm + 1900 lm
Lenses
All lenses are suitable for VP8110 LED bollard.
Operating temperature
-40...+40 °C (-40…+100 F)
Dimensions l x w x h
450 x 150 x 160 mm
300 x 150 x 160 mm
450 x 300 x 160 mm
Base inside concrete
395 mm extra (invisible part)
Materials
Bollard and luminaire; zinked steel, painted. Light source; aluminium
Weight
approx. 30 kg total
Fastening
Concrete base
Led lumen maintenance
Typically less than 10% / 100 000h
300 x 150 x 160 mm
We reserve the right to make changes.
31
VP9202 wall and ceiling luminaires
for retrofit purposes
Standard:
230 V
50 Hz
4000 K
IP20
Aluminium
3 x 2,5
mm2
-o-
350 mA
T=25˚C
a
F
VP9202 M1 is an independent luminaire, which can be installed within old luminaires to replace e.g. old 50W
mercury vapour lamps. VP9202 is an excellent choice to be installed e.g. in Defa P001, P002, P003, N001, N002
and N003 luminaires. All old technical parts are removed prior to the installation of VP9202.
Luminaires
The VP9202 can be installed in almost all luminaires that it fits in. The VP9202 can also be installed separately on
the walls and ceilings of dry spaces. All Valopaa optical solutions are available for the VP9202.
VP9202 LED light luminaire can
be installed inside old luminaires
to replace the traditional light
bulb. The old electronics and lamp
base are removed from the old
luminaire, VP9202 lighting unit is
installed instead, and connectors
are attached.
VP9202 M1
Input power
11 W
Useful quantity of light
950 lm
Power ratio
> 0,9c
Operating temperature
-40…+40 °C (-40…+100 F)
Measurements, l x w x h
133 x 100 x 35 mm
Materials
Aluminium and stainless steel
Fastening
Screw fastening to wall, ceiling or body of old light fixture
LED lumen maintenance
Typically less than 10%/100 000 h
We reserve the right to make changes.
32
VP9203 LED replacement unit
Standard:
230 V
50 Hz
4000 K
Aluminium
3 x 2,5
mm2
-o-
350 mA
T=25˚C
a
F
For urban architectural luminaires, such as the Idman Cupola, we offer LED replacement
units VP9203 M6 and M8. The old infrastructure can be preserved and the appearance and
the lifespan receive several more years before new luminaires are needed.
VP9203 M6
VP9203 M8
Input power
105 W
138 W
Useful quantity of light
9750 lm
13000 lm
Fastening
On top of pole, inside the old Cupola casing.
Luminaires
Valopaa has replaceable 6-8 LED module units with the desired optics for Cupola
luminaires. Replacing the unit is easy and fast, the old lightning unit is removed and
replaced by the new LED unit.
VP9205 LED replacement unit
Standard:
230 V
50 Hz
4000 K
Aluminium
3 x 2,5
mm2
-o-
350 mA
T=25˚C
a
F
VP9205 LED replacement unit has been developed to be installed inside
the Idman/Philips Tree 700MPX, which is mostly used in lighting of trees.
Old lighting unit inside the luminaire is replaced with the new VP9205 M5
LED replacement unit. The frame and the cover glass of the old luminaire
are preserved. The driver is installed separately onto the ground or within
a pole.
VP9205 M5
Input power
48W
Useful quantity of light
4500 lm
Fastening
Screw fastening to the body of old luminaire under existing cover glass
VP9203 / VP9205
Power ratio
According to standard EN 61000-3-2.
Encapsulation
According to the encapsulation of the original light fixture when installed
Operating temperature
-40…+40 °C (-40…+100 F)
Materials
Aluminium and stainless steel
LED lumen maintenance
Typically less than 10%/100 000 h
We reserve the right to make changes.
33
INTELLIGENT SOLUTIONS
The Valopaa intelligent LED lighting system increases the energy efficiency of LED lighting further still.
Moreover, the illumination can be adjusted to fit the environment precisely and be more pleasant with the
intelligent control.
The average input power of intelligent luminaires is often only half of their full input power. The lighting can be
controlled with sensors to meet the prevailing need for light. Motion sensors can detect if there are e.g. people
at the target area, requiring more light, and ambient light sensors can measure the amount of light needed at
that moment.
The system works wirelessly via radio communication. It is easily adaptable for lighting of streets, outdoor areas,
petrol stations, industrial and commercial estates, and most other lighting sites. The range of lcompatible
luminaires with the intelligent system is expanded continuously.
Intelligent solutions
Valopaa´s intelligent LED lighting system:
• Further increases the energy efficiency of LED lighting. Generally cuts energy consumption in half
compared to corresponding set lighting, i.e. the payback time of the investment is almost halved.
• Can be expanded as needed, from single luminaires to groups of luminaires or sensors, which can be
further expanded to control entire buildings or areas intelligently and remotely, if desired.
• Sensors can be situated freely – separate sensor units or sensors in light fixtures
• Future proof, wireless updates
• LED lumen depreciation compensated, no need to adjust diminishing light source. Reduced energy
consumption. The amount of light is maintained on the same level throughout the life span.
• Remote control with web application, requires VPS Master unit
• Grouping of luminaires and changing settings
• Setting day and week profiles
• Fault reporting (upcoming feature)
• Turning off luminaires
• Downloading new features
Products:
• Intelligent luminaires
• VPS Master unit
• VPS Intelligent Wireless Multisensor
Constant lumen output
34
Features
i
RF
All the parts of the intelligent LED lighting system communicate wirelessly via radio.
The radio communication is encrypted and license free.
CL
Constant Light - The intelligent luminaires compensate the lumen depreciation of the
LED components. Contant light output throughout the product lifetime. This
increases energy savings, as lower current levels can be used with lights from the getgo.
OTA
Over the Air - The luminaires and sensor units can be updated wirelessly, without the
need to open up individual luminaires.
- Settings, features and grouping of system parts are updated wirelessly
- Software can be updated to the latest releases even after years of operating
s
Some of the intelligent luminaires have integrated sensors. They can be recognized by
this “s” - symbol at the luminaires section of this catalogue. A separate sensor unit can
also be a part of the intelligent lighting system (see p. 39). The sensor unit includes the
same sensors that are integrated to some luminaires.
PIR
ALS
Intelligent solutions
Many VP LED luminaires are also available as intelligent versions. They can be
recognized by this “i” - symbol at the luminaires section of this catalogue. All the
intelligent luminaires operate wirelessly through radio (RF), they compensate the LED
lumen depreciation (CL), and they can de updated wirelessly (OTA).
Passive Infrared - motion sensor.
Ambient Light Sensor.
35
Intelligent LED lighting system
Intelligent solutions
Internet
Server
Other systems
Master unit
Relay
- Energy price
- Weather
Remote control
Twilight
switch
System parts
Intelligent luminaire – setting light intensity as needed, constant lumen output.
Master unit – controlling luminaires one at a time or in groups, timing, location data. Software compatible
with lighting control software located at a server.
Sensor(s) – different alternatives for locating sensors for luminaire control, currently available motion
sensors, brightness measurement, and twilight switch.
Radio communication between devices – license free, encrypted, two-way radio communication.
GSM/GPRS connection – defined interface for messages, connection to server.
Server – software for lighting control. Third party software that is compatible with Valopaa’s master unit.
PC (user’s terminal) – connection to server, lighting control, monitoring and maintenance.
Other systems and data available from them, features depending on the capabilities of the lighting
control software.
36
We reserve the right to make changes.
The Valopaa Intelligent LED Lighting System is a modular system platform for safe, befitting and flexible
intelligent lighting, also enabling possible future expansions and modification needs.
The system can be expanded according to the need of the customer, starting from intelligent LED luminaires,
to sets of luminaires, control sensors and master units controlling all devices, to comprehensive remotely
controlled modern intelligent solutions.
The intelligent LED lighting system can be expanded in stages. Intelligent luminaires form the basis of the
system. One can start by purchasing just the luminaires. Features, e.g. Master unit, different sensor and remote
controlling can be added to the system later depending on necessity and investments.
An intelligent Valopaa LED luminaire (i) has an electrical identity,
intelligence and a two-way wireless radio connection, which
controls the luminaire, the amount of light and, furthermore,
enables developing new features during its lifespan. Some
luminaires also have integrated sensors (is).
2. level - Intelligent network
Intelligent networks consist of intelligent wirelessly
communicating luminaires and sensors controlling
the lighting. The luminaires adjust the lighting
according to set parameters and sensory control.
The sensor may be placed either in the luminaire or
the connecting or separate device. The amount of
light is adjusted according to need.
i s
Intelligent solutions
1. level - Intelligent luminaire
3. level - Building and area level
Valopaa master units are deployed when a building
or general area contains many luminaires and
intelligent networks with sensors. The master
unit enables further lighting control through the
clock, the sun, calendar and remote control via
the Internet. The master unit controls the local
lighting independently on Level 3, all changes are
implemented with a web browser, either by WLAN,
Ethernet or 2G/3G.
4. level - Operator level
The Level 4 is intended for customers, who need efficient control of several Level 3
lighting solutions. Lighting is controlled by a web browser, enabling controlling one,
several or all solutions of the operator simultaneously. The Operator Level streamlines the
implementation of changes and administration.
37
Master Unit
The master unit is used with the intelligent lighting system of Valopaa Ltd. It masters the lighting
control according to prespecified settings, which can be changed with a computer that is connected to the
master unit via a web application.
Inside the sturdy aluminium case of the master unit we find an industrial Linux-computer, lighting control
software, a real-time clock with guaranteed battery life beyond expected lifespan and two-way secured
wireless connections to the luminaires, sensors, the computer, smartphones, the Internet and a wired Ethernet
connection.
Intelligent solutions
• Radio communication with the luminaries and sensors
- Control based on clock, calendar or sensory data (sensors optional)
- Parameter updates
- Software updates
• 3G, WLAN and Ethernet connections
- Controlling luminaires, receiving updates to parameters and software
- Receiving updates to internal software by SRD radio / GPRS.
- Sending statistics / operational data
• Industrial Linux-computer
- Calendar, clock
- Guaranteed battery life beyond expected lifespan
Technical properties
VPS Master
38
Operating voltage
90-264 VAC / 50-60Hz, protection class II
Encapsulation
IP65
Operating temperature
-40…+50 °C (-40…+120 F)
Measurements, w x l x h
318 x 170 x 61 mm
Fastening
Screw fastening
SRD Antenna
863-870 MHz, std. ETSI EN300 220-1
GSM Antenna
824–894 MHz / 1710–1990 MHz
WLAN Antenna
WLAN
Ethernet connection
Cable
We reserve the right to make changes.
Intelligent multisensor
The functionality of Valopaa´s wireless intelligent multisensor is chosen according to need: It can be either a
motion detector, standard light sensor or a photoresistor. The parameters and functionality are altered and
governed by the master unit. The communication between the master and the sensor is wireless.
Intelligent solutions
•An intelligent sensor, which communicates wirelessly and can be placed freely.
•The sensor unit can control a luminaire, a network of luminaires, or it transmits data to a master unit. The
sensor recognises mode changes, which it transmits to the luminaires and the luminaires adjust the amount
of light.
•The sensor unit is set to motion detection, brightness sensor or dimmer switch at installation.
•The functionalities and factory preset parameters can be modified with a master unit:
- Motion detection; shape, sensitivity
- Lux meter; sensitivity, range
Technical properties
VPS Sensor Unit
Operating voltage
90-264 VAC / 50-60Hz, protection class II (option 12 VDC)
Encapsulation
IP 65
Operating temperature
-40…+50 °C (-40…+120 F)
Measurements, w x l x h
160 x 115 x 60
Fastening
Screw fastening
SRD Antenna
863-870 MHz, std. ETSI EN300 220-1
We reserve the right to make changes.
39
LIGHTING MODULES
AND COMPONENTS
All Valopaa LED luminaires contain LED modules, designed and manufactured by us. The modules and
components are developed with our own product platform and our products have a wide range of applications.
This increases the reliability of our products, since the structures and modules are tested in all kinds of
conditions.
The product platform includes LED modules, drivers and components of the intelligent lighting system. The
LED modules are FI approved. All of our drivers and connecting devices are certified.
The VPM LED modules can be used in a wide variety of projects. Customised products can be developed
quickly with Valopaa´s product platform. Furthermore, architects and lighting designers can design new
luminaires based on Valopaa LED modules. The developed luminaires may be produced in cooperation with
Valopaa, or they can be even sold as a part of Valopaa´s product range. Valopaa also carries out ODM projects.
Modules
Valopaa lighting modules and components
•
•
•
•
•
Ready-made and tested LED technology – with or without intelligence – as a part of the luminaire range of
the customer
Can be implemented as part of a luminaire design project by architects, contractors or designers
All Valopaa optics and LED modules are intercompatible
All Phillips Lumileds Rebel and Z-led colours, colour temperatures and colour renderings are available
Standard modules also available as spare parts
Products
•
•
•
VPM LED modules
VPD drivers
VPS intelligent modules
References
•
•
•
40
The LED modules and 12V driver have been used in solar panel luminaires, the LED modules in aquarium
lighting (not under water) and the lighting control technology in indoor lighting applications
Retrofit projects carried out by customers
The VPM LED modules have also been used in many luminaire design competition entries
VPM LED modules
The VPM LED modules have been developed for street luminaires, but they are suited also for a wide variety
of lighting needs both indoors and outdoors. The LED module structure is dust and water proof. Hence they
can be used in all kind of locations above water level with sufficient ventilation. The LED modules have a wide
array of use from spotlighting to general lighting – we need simply to choose the right optics for the right light
distribution and the correct fastening for the module into the luminaire or other target.
VPM4 M4
VPM 2
The VPM LED modules contain high class LEDs, the optics for the light distribution and a firm aluminium body.
The VPM1 LED module has sufficient cooling in itself to ensure heat transfer from the LEDs to the surrounding
air. The VPM2 and VPM4 LED modules require a luminaire with a body that transfers the heat off from the LED
modules.
Technical properties
VPM1
VPM2
VPM4 M2
VPM4 M3
VPM4 M4
Current
Nominal 350 mA, max 1 A
Protection class
Class I until 450 VDC, and SELV
Input power
Typical 8,5 W
17 W
25,5 W
34 W
Useful quantity of light
(with 4100K LEDs)
950 lm
1900 lm
2850 lm
3800 lm
Modules
VPM 1
(with nominal current, when temperature of the body 60 °C/120 F)
LED connections
SIngle module has 8 LEDs series-connected. VPM4 structure has multiple modules
series-connected.
LED lumen maintenance
Typically less than 10%/100 000 h (with nominal current)
Colour temperature of
the light
4000 K. Customer-specific colour temperatures and colours possible in LUXEON Z ES, LUXEON
Rebel, and LUXEON Rebel ES series, with limitations from the LED manufacturer.
Encapsulation
min. IP65
Operating temperature
-40…+60 °C (-40…+140 F)
Measurements, w x l x h
70 x 52 x 55 mm
70 x 54 x 20 mm
Materials
Body recycled
aluminium
Body aluminium
100 x 50 x 14 mm
150 x 50 x 14 mm
200 x 50 x 14 mm
fasteners stainless steel, lens UV-protected PC or PMMA
Colour
Black, white
Anodized aluminium
Fastening
Fixed installation
and rotatable
installation
Screw fastening
Note! The standard versions of the LED modules include 8 high power LEDs. The technical properties in the table
above are based on eight LEDs. The modules can also be equipped with six, four or two LEDs for different brightness
levels. In these cases the electrical values change accordingly.
The products on this page only for lighting producers or as spare parts. We reserve the right to make changes.
41
NE
W
PR
OD
VPM5 LED modules
UC
The VPM5 LED modules have been developed to be retrofitted or used essentially in any luminaire. Due its own
cooling ribs the heat management is taken care of and the LED modules can be used for many applications
indoor and outdoor.
The amount of LED units per module and cooling holes can be tooled as requested, therefore, the length
of VPM5 module can vary. The VPM5 LED module structure is dust proof and water resistant, and all Valopaa
optics can be used according to application.
Valopaa uses VPM5 LED modules in our own luminaires and retrofit units, but it is available also for other
luminaire manufacturers for their needs.
Modules
Technical properties
VPM5 M2
VPM5 M4
VPM5 M6
VPM5 M8
Current
Nominal 350 mA, max 1 A *
Protection class
Class I until 450 VDC, and SELV
Input power
17 W
34 W
51 W
68 W
Useful quantity of light
(with 4000K LEDs)
1900 lm
3800 lm
5700 lm
7600 lm
(with nominal current, when temperature of the body 60 °C/120 F)
LED connections
SIngle module has 8 LEDs series-connected. The structure has multiple modules
series-connected.
LED lumen maintenance
Typically less than 10%/100 000 h (with nominal current)
Colour temperature of
the light
4000 K. Customer-specific colour temperatures and colours possible in LUXEON Z ES, LUXEON Rebel, and LUXEON Rebel ES series, with limitations from the LED manufacturer.
Encapsulation
IP65, optionally IP66 with lens protecting polycarbonate or glass
Operating temperature
-40…+60 °C (-40…+140 F)
Measurements, w x l x h
75 x 116 x 50 mm
120 x 116 x 50 mm
250 x 116 x 50 mm
360 x 116 x 50 mm
The amount of LED units per module and cooling holes can be tooled as requested, therefore, the
length of VPM5 module can vary.
Materials
Body aluminium, fasteners stainless steel, lens UV-protected PC or PMMA
Colour
RAL7024, other colours available in RAL
Fastening
Screw fastening
*When used with 700mA current, useful quantity of light is approximately 1,7x, max temperature +40 °C/100 F.
The products on this page only for lighting producers or as spare parts. We reserve the right to make changes.
42
T
VPD drivers
Modules
Valopaa uses certified 230VAC drivers
that meet the standards even at -40°C
temperatures. With the structures used
in VP LED luminaires, drivers achieve the
long life required in professional lighting
applications. Valopaa’s intelligent
luminaires use Valopaa’s own Finnishmade drivers. They are available, in
addition to 230VAC use, with 12VDC, to
power supply of single module, for use
with batteries or solar cell.
Technical properties
Standard current 230VAC
drivers
Philips white
Philips black
230VAC drivers for intelligent
light fixtures
12 VDC driver
VPD 140W
VPD 12V
VPD 150W
Operating voltage
230VAC/50Hz
230VAC/50Hz
12VDC
Protection class
class II
class I
class I
Suitability
1 module
5-16 modules
4-8 modules
(32-64 LEDs)
8-12 modules
(64-96 LEDs)
1 module
Input power
11 W
56-158W
140 W
150 W
15 W
700 mA
500 mA
500mA
(LED current 350 mA)
Max current
350 mA
350 mA
Power ratio
EN 61000-3-2
EN 61000-3-2
n/a
Encapsulation
Encapsulated
No
Encapsulated
Operating temperature
-40…+55 °C
-40…+60 °C
-40…+60 °C
Measurements,
w x l x h (mm)
132 x 34 x 25
240 x 59 x 37
259 x 59 x 41
45 x 30 x 25
Weight
0,15 kg
1,27 kg
0,5 kg
0,05 kg
Control range
n/a
0 and 10-100%
20-100% internally, 0-100%
PWM
Controlling
n/a
PWM
PWM
The products on this page only for lighting producers or as spare parts. We reserve the right to make changes.
43
APPLICATIONS
Applications
44
Street and road lighting
Solid White Light for Streets and Roads
Valopaa LED luminaires are an excellent solution for street lighting. Our luminaires are easily maintainable,
small, light in weight and beautifully designed. The luminaires do not collect dirt or snow. Most importantly,
our luminaires produce solid and unflickering white light, which also benefits the operation of traffic and safety
cameras.
The lifecycle costs of Valopaa´s LED luminaires are low, due to high energy efficiency and durability. The
maintainability is endorsed by the fact that all of our products are based on the same product platform. The
reliability data of our products stands to the disposal to all of our clients.
The product range of Valopaa also includes luminaires for underpasses and bridge undersides, as well as
spotlights and floodlights for illuminating road surroundings. The main targets for our street light luminaires are
streets and roads, city centres, pedestrian paths, underpasses, parking areas and parks.
The VP1301 LED Street Luminaire has the approval of the Finnish Transport Agency. The same LED modules
and components are used in all Valopaa luminaires.
Case: Kuokkala Bridge
Kuokkala Bridge is one of the best-known landmarks of Jyväskylä. Valopaa LED
luminaires replaced old high-power sodium lamps in the summer of 2013. The
energy consumption of the bridge dropped to 25%, and simultaneously the
quality of the light improved. Instead of the old yellow light, the bridge is now
illuminated by pure and white light.
Applications
The street and road lighting is controllable with the Valopaa Intelligent Lighting System. It cuts the energy
consumption in half, which significantly shortens the payback time.
Read more online.
45
Bridge lighting
Bridge Lighting with Excellent Protection against Vandalism
The Valopaa LED bridge luminaires have been installed into hundreds of underpasses and bridge undersides
around Finland. The luminaires are energy efficient, easy to install and very durable. Our luminaires are
protected against vandalism and the specially designed optics to underpasses ensure pleasant and energy
efficient lighting.
The Valopaa product range includes recessed and surface-mounted versions of bridge luminaires, in different
power versions. Vandalism shields are available for low structures to protect against vandalism. We also offer a
variety of solutions for decorative bridge lighting.
Valopaa’s VP2221 and VP2224 LED Bridge Light Fixtures have the approval of the Finnish Transport Agency.
Valopaa bridge luminaires
• Easy and safe to install
• Covers up old recess slots nicely – several sizes available for the front panel of the recessed luminaire
• Energy efficient compared to traditional lighting solutions – e.g. a 125W mercury luminaire is replaced with
a 22W Valopaa LED luminaire
• Extremely durable, lifespan expectancy over 30 years
Applications
46
Case: Underpass lighting in Southwest Finland
Dozens of pedestrian and bicycle underpasses across southwest Finland are now
enjoying bright and sustainable LED lighting. The new luminaires, produced and
delivered by Valopaa, have replaced the old mercury vapour lamps that in the
past shed light on the cyclists and the pedestrians.
Read more online.
Petrol station lighting
Get a Grip on the Energy Consumption of Petrol stations
Valopaa LED luminaires are an outstanding choice for petrol station lighting. LED lighting decreases energy
costs and creates pleasant customer experiences. Our solutions are equally suitable to brand new and older
petrol stations. The lighting solutions have been developed in close cooperation with petrol station chains and
contractors.
Particularly the intelligent LED lighting systems provide plenty of advantages to petrol station lighting.
Intelligent systems can be set up to control the lighting at fuel meters, and also the yard, the canopies, the car
wash and service halls.
The Valopaa Intelligent LED Lighting System adjusts the lighting level at the fuel meters field according to
customer stream and the surrounding circumstances. E.g. in the north, the lighting level is higher during the
dark and rainy autumn than during the winter, when the ground is covered with white snow, reflecting the light.
The system is also detects movement in the area. The lighting is dim when there is no movement, however, as a
person or vehicle enters the area, the lights brighten up.
Case Shell Esloo, Netherlands
The canopy of Shell petrol station in Elsloo city is now been light up by Valopaa
LED lighting. During summer of 2012 Valopaa delivered an intelligent lighting
system to a petrol station located in Southern Holland.
Read more online.
Applications
A remote control system can set the desired lighting levels, and the duration and intervals of changes. The
luminaires can also be controlled in groups, e.g. according to driving lanes.
47
Area lighting
Adaptable Area Lighting
Valopaa luminaires meet the demands for most area lighting requirements – be that parks, parking facilities or
precise spotlighting. By choosing the right optics we attain the desired lighting.
Valopaa LED luminaires have unique design. Luminaires of the same design family have a variety of different
installation options. Hence different installations, e.g. to lighting poles, walls or columns, can be chosen
according to the installation site and needs. The VP1302 LED fixtures directs light from one pole to two
directions, which is useful e.g. at parking areas.
The Valopaa Intelligent LED Lighting System is very functional when applied to area lighting. The lighting is
maintained exactly as desired at any given moment and energy is saved.
Valopaa area luminaires
• Luminaires from the same design family available with different installing options and power versions
• Multiple optics can be used in one luminaire
• VP1302 LED fixture available in one and two sided versions - enables lighting from one pole to two
directions
Applications
48
Case Finavia Oulunsalo Airport
During the Oulu Airport reparation and enlargement project, the parking lot
and its lighting were renewed as well. Since the end of 2010, the P1-parking
area, located directly in front of the terminal building, has been illuminated with
Valopaa’s LED light fixtures.
Read more online.
Facade and accent lighting
Light up the Facades
Valopaa products illuminate facades and courtyards creatively. Certain objects or details deserve also to be
highlighted.
The colour of light and the colour temperature are key ingredients in accent and spotlighting and lighting of
facades. All colour temperatures can therefore be specified for the Valopaa LED modules. We guarantee that
LED modules with the exact same colour temperatures as the original will be available as spare parts years
down the road. Standard Valopaa LED luminaires have neutral white 4000K LEDs.
Valopaa facade and accent luminaires
• Colour of light and colour temperature can be specified precisely
• Optical solutions increase energy efficiency and light alignment
• Minimal need for maintenance – important especially if luminaires are difficult to get to
• Power versions, optics and installation type can be tailored
• Retrofit solutions suitable for historical sites
The renovators of the Raatti Stadium in Oulu were faced with a small surprise. A
magnificent wall was built around the stadium area, and it was to be illuminated
with special vandalism safe fluorescent light fixtures. However, the production of
these so called wall washers had been discontinued. Another solution needed to
be found. A test installation proved that the Valopaa LED luminaires were spot on
for the illumination of the stadium wall.
Read more online.
Applications
Case Raatti Stadium
49
Industrial and hall lighting
Reliable Industrial Lighting
Valopaa offers a variety of solutions to the lighting of industrial estates and halls. As an example, the VP1401
LED luminaire is an excellent replacement choice for old mercury high bay luminaires. The Valopaa LED
luminaires have a very long lifespan and are maintenance free. These qualities become crucial if the luminaires
are situated in places that are difficult to reach, or if production must be halted due to lamp changes.
Intelligent LED lighting and LED luminaires enable a completely new level in lighting control. Valopaa
Intelligent LED Lighting System maintains energy efficiency at top level, since the lighting is always optimised.
Valopaa Intelligent LED Lighting System operates wirelessly; furthermore, it can easily be deployed for older
buildings and sites as well.
Valopaa industrial luminaires
• Minimal need for maintenance
• White light in an energy efficient manner
• Pleasant colour rendering
• Replaces old mercury luminaires
• CCTV compatible
• No disturbances or reactive effects into the electrical grid
• Wireless intelligent lighting system with sensors cuts energy consumption in half
Applications
50
Sport facilities and tracks
Good Exercise Requires Good Lighting
The Valopaa LED luminaires are brilliant for sport facilities and tracks. Our product range includes luminaires for
ice hockey rinks, swimming halls, skiing and jogging routes, horse riding centres and downhill skiing slopes.
LED lighting brings white light to athletes in an energy efficient and sustainable manner. E.g. old 125W mercury
luminaires can in most cases be replaced with 22W LED luminaire. The aptitude and the energy efficiency of
lighting can be increased significantly with the Valopaa Intelligent LED Lighting System.
Applications
Valopaa luminaires for sport facilities and tracks
• The luminaires can be installed on top of old poles, producing good lighting
• With the correct optical choices, a good horizontal lighting above the fields can be achieved
• LED lighting is excellent for video and still photography
• The long lifespan of the Valopaa luminaires reduces maintenance work
• Valopaa Intelligent LED Lighting System enables control of lighting for each luminaire or groups of
luminaires, resulting in significant energy savings.
• Valopaa Intelligent LED Lighting System brings modern lighting control also to older sites and routes.
51
Modernization of light
fixtures
Retrofit Projects: Modernisation of Luminaires
We do not generally want to replace luminaires that are historical or designed by an architect, although energy
efficiency requirements would call for more modern and efficient technologies. However, the solution is easy –
Valopaa retrofit projects. New LED technology is installed inside the old luminaires. The projects are easy to
implement with Valopaa´s modular product platform.
To begin a retrofit project, information on the model of the luminaire and a picture is needed. Later on a
sample luminaire is required for the design process, all to validate the technical choices. The design and
production of the retrofit product takes about two months. According to customer needs Valopaa will produce
a sample luminaire to ensure that installations and light distributions will meet all requirements. The contractor
installs the luminaires according Valopaa guidelines and instructions.
Applications
Valopaa retrofit projects
• For sites where the old luminaires are to be preserved
• Cost-efficient, only the lighting technique is changed – no need for purchasing or designing new luminaires
• Brings the benefits and energy efficiency of modern-day lighting technology to old traditional luminaires
• Also available with Valopaa Intelligent LED Lighting System
• The contractor of the customer is in charge of the installation
Case Orion Pharmaceutical factory
The outdoor lighting of Orion´s pharmaceutical manufacturing site
in Turku, Finland, was modernised in January 2012. The project was
exceptional because the casing, the look of the luminaire, and the
lighting infrastructure were fully preserved. Installing Valopaa´s LED
modules inside the classic dome-shaped Cupola luminaires was the
solution.
Read more online.
52
LED luminaires for retrofit purposes
Replace the traditional light bulb with modern technology LED retrofit unit and improve energy efficiency.
Check pages 32-33 or please contact our sales team for more information.
Modern LED technology
replaced the old
gaslights in Berlin
Applications
Oulu Market Hall wanted to
keep the old luminaries, but
renew the technology to be
more energy efficient.
The old mercury vapor
lamps were replaced with
new LED technology at
the Orion pharmaceutical
factory of Turku.
53
Symbols
230 V
50 Hz
IP65
4000 K
The operating voltage of standard products is 230VAC/50Hz, and protection class I.
Several of the luminaires are available also for operating voltage of 110VAC, and for
different control systems, such as Dali or 1-10V control. Ask more from our sales team!
IP44
The IP class of the luminaires is announced with this symbol. The stated IP class is
always for installed luminaires. Valopaa’s LED modules are always at least IP65, as
most drivers that are used in the VP LED luminaires.
The standard versions of all VP LED luminaires have LED components with 4000K color
temperature of light, which is neutral white. Other color temperatures are available as an
option, with limitations from the LED manufacturer.
It is also possible to use color LEDS, e.g. for atmospheric impressions. The color LEDs are
available for surcharge, with limitations from the LED manufacturer. Colors available in the
LUXEON Rebel LED range:
The colors presented here are the main colors of the color range. For full range of available colors, see:
http://www.philipslumileds.com/products/luxeon-rebel/luxeon-rebel-color.
RAL9003
Aluminium
RAL9005
RAL9006
The casings of most VP LED lluminaires are painted (stoved)
aluminium. The standard color is indicated with this symbol,
but other colors (in RAL), as well as other finish gloss levels and
structures, are available for surcharge.
The casing for all VP LED light fixtures is made of aluminium. This symbol indicates that the
casing of the luminaire is anodised, thereby the color of the product is aluminium.
This symbol indicates that the luminaire is grounded.
F
The F symbol indicates that the luminaire can be directly mounted on a normally
flammable surface.
All Valopaa products are made from RoHS compliant components and materials.
54
5 x 2,5
mm2
3 x 2,5
mm2
-o-
-o
3x4
mm2
The connection type of the luminaire is indicated with these symbols.
The connection of the luminaires can either be chained (-o-) or cable ending (-o).
i s
Many VP LED luminaires are also available in intelligent versions (i). Some
intelligent luminaires also have internal sensors (s). Read more about the
intelligent solutions on pages 34-39.
DALI
Most of the Valopaa LED luminaires are available with the DALI control system
compatible drivers.
1-10V
Most of the Valopaa LED luminaires are available with 1-10VDC dimmable drivers.
All VP LED light fixtures are fully recyclable, and they do not contain hazardous waste or
other dangerous materials.
The CE marking is the manufacturer’s declaration that the product meets the
requirements of the applicable EC directives.
55
WEGE-LICHT BV / Valopaa Ltd.
www.ledsgoforthebest.com
info@ledsgoforthebest.com
WEGE-LICHT NL/B
ing. Raymond Danklof
Aronskelk 96
6181 MK Elsloo
The Netherlands
Tel. +31 46 8501127
Mob. +31 6 48742948