Beghelli Street Light
HIGH ENERGY SAVING
STREET LAMPPOST
WITH OPTIONAL PHOTOVOLTAIC SYSTEM
Many streets are illuminated with old fashioned lighting equipment
which is not up to modern legal standards, where energy savings and
light pollution are concerned.
To substitute this equipment it calls for overcoming obstacles and
considerable investment of funds; an effort from the lighting company
and a search for the best possible technological solutions.
“A Planet of Light at Zero Cost” is a whole new way of offering
illumination equipment to lighting companies, integrating a technology
with definite innovative features along with an integrated service
presently used in many other fields.
“PlanetSun” integrates the project with the installation of rotating
photovoltaic panels in order to produce energy while at the same time
reducing the energy consumption of street lighting fixtures.
Energy savings and cost savings
Qualitative analysis of the project: the advantages, the savings 4
The project, the steps, the benefits
6
Diagram of System layout
8
Illumination Technology
10
Control Centre ‘Contarisparmio’
12
The Beghelli electronic ballast
16
Electronics servicing road safety
19
Optical dish and anti-reflection glass housing
20
Laws and light pollution
21
Technical characteristics of “The Beghelli street light”
22
Kit Contarisparmio RX100
24
Technology for emergency lighting
Central safety Lighting
26
Emergency control centres
26
Photovoltaic modules with solar tracking system for street lighting
28
2
50% of energy production at zero cost
29
Double axis movement for maximum energy
30
Generator system with integrated inverter
31
Automatic night position
31
Technical information
32
Summary of technical characteristics
34
Key to symbols
36
The Beghelli Lamppost
Street lighting
and emergency lighting
Photovoltaic modules with solar tracking
system for street light lampposts
Lamppost
pag. 22
Photovoltaic panels for Lamppost
pag. 33
Planet of Light control centre
PlanetSun control centre
Kit Contarisparmio RX100
pag. 24
PlanetSun centre
pag. 32
Emergency Control Centres
Emergency
centre
300 W
pag. 26
Emergency
centre
1200 W
pag. 26
Emergency
centre
3000 W
pag. 26
Emergency
centre
6000 W
pag. 26
3
ADVANTAGES
Dimmerable
Electronic Ballast
Save energy:
- Guaranteed economic benefits
- Environmental benefits for the community
- Selective dimmer function
- Longer life for the lamps
Electronically guided
double lamp housing
Road safety:
- Immediate switch-on in case of black-out
- Double the illumination when needed
- Light remains on even if current fluctuates
- Drastically reduced maintenance requirements
Super-efficient
reflection dish
Uniform lighting exceeds legal standards:
- Improved visibility for drivers
- Improved safety for pedestrians
- No light pollution
Centrally controlled
Emergency Lighting
Safety in case of black-out:
- Immediate switch-on of second lamp
- Localisation of the critical areas
- Selective dimmer function
ENERGY AND COST SAVINGS GUARANTEED
GREATER ROAD SAFETY
FULL COMPLIANCE WITH REGIONAL LAWS
GUARANTEED MAINTENANCE COSTS KNOWN
MAXIMUM CITIZEN SATISFACTION
4
5
Energy savings,
The project
The Beghelli Group has designed a street lighting system able to save up to 60% on energy costs,
as opposed to traditional lamppost using a VM lamp (mercury vapour), and up to 35% on the cost
of traditional SAP (high pressure sodium) street Lampposts.
The saving increases noticeably according to the degree of usage during the nightime, where
required by local and regional laws.
The project calls for the replacement, “at zero cost” to the buyer, of Lampposts for a street
lighting system with high-energy savings with a new generation equipment.
The replacement and ordinary maintenance costs of the equipment are all included in the service
charges for the entire duration of the contract.
To insure real energy savings with the Beghelli system, a bank guaranty covers the minimum
annual savings promised by each street light.
Thanks to an electronic system you can, in real time, track how much energy the new system is
saving compared to street lights using a conventional lighting system.
The part of the savings that exceeds the minimum guaranteed will be a further economic benefit
for the buyer.
Furthermore, you can ask for emergency lighting to be installed on the very same lamppost.
One or more Emergency Centres will be connected to the lamppost in order to feed them, should
there be a blackout.
In order to get the most out of your street light replacement, you can add a photovoltaic tracking
system directly onto your new Beghelli Lamppost, thereby benefiting from some of the incentives
to cover for the cost of the investment.
6
cost savings
The steps
•
We will replace all of the Lampposts at ‘zero cost’ to the buyer
•
We will install a new generation lighting system which will bring enormous savings compared
to traditional street lights
•
We will measure the real energy savings after installation of the new street lights
•
We will guarantee a savings of 10 euro per year for each lamppost, backed by a bank
guaranty
•
Savings which exceed the guaranteed 10 euro per year will be divided between the buyer
and Beghelli Servizi - Divisione ESCO
•
The buyer will benefit from ordinary maintenance of the lighting for the entire duration of the
contract
•
It is also possible, “at zero cost” to the buyer, to integrate the new lighting with PlanetSun
photovoltaic panels and immediately enjoy a 50% energy production.
The remaining part of the cost benefits will go to Beghelli Servizi – Divisione ESCO in payment for
the supply and installation of the street lights
The benefits
•
Immediate savings on energy costs insured by a bank guaranty
•
Ordinary maintenance costs included in the service charges for the entire duration of the
contract
•
Upon termination of the contract the buyer may purchase ownership of the entire system
and enjoy 100% of the energy cost savings
•
Saving energy helps to safeguard our planet by reducing the emission of polluting substances
resulting from the production of energy
7
RADIO CONNECTION WITH
GSM CONNECTION BETWEEN THE CONTROL CENTRE AND THE BEGHELLI SERVIZI DATA BASE
An idea
for street lighting
Replace obsolete street lights with new
high energy saving lampposts at “zero
cost” to the buyer
Meet the legal standards imposed by local
and regional laws governing energy
savings and light pollution
8
THE CONTROL CENTRE
CENTRALIZED FEEDING FROM THE BATTERIES TO THE EMERGENCY CENTRE
An idea
for road safety
Install safety lighting on street lights
and enjoy ordinary maintenance
of the new emergency lighting system
for the entire duration of the contract
Beghelli’s remote-control systems
perform the necessary tests
to assure the system’s efficiency
9
Lighting
Technology
“A Planet of Light at Zero Cost” objective:
light is an integral part of the environment
in which we live and work.
It is our duty to use the least amount
of energy possible to produce it.
10
11
Contarisparmio Control centre
Count the Savings (Contarisparmio) is a patented system
which can precisely measure the energy consumption of
each street light installed and compare it to a similar
traditional type product to calculate and show, on a display
screen, the energy savings in action.
The precision of the measurement is assured: its technology
is similar to the old style energy counters which meet the
requirements as indicated by the EN 50470-1 and EN 504703 regulations.
12
13
KNOW YOUR ENERGY SAVINGS
IN REAL TIME
The Count the Savings (contarisparmio) counter
shows the energy consumption of each controlled
street lights, measures the amount of time it was on
*
and compares it to the data extracted from traditional
street lights using an average consumption of
conventional street lighting.
*
* exemplary values
RADIO DATA TRANSMISSION USING
THE SPREAD SPECTRUM SYSTEM
Each street light is connected by radio transmission
to the Contarisparmio control centre. The system
used for the transfer of this data is very safe.
16 channels and the CRC error detection system
are used, with back-off algorithms to guarantee
the integrity of the data reliability of the
14
transmission in all weather conditions.
The
aerospace derived SFH DSSS system, better
known as Spread Spectrum, does not provoke
electro-magnetic pollution and is the very best
technology offered today in the field of civic
radio-communications.
WEB VERIFICATION
OF ENERGY SAVINGS
The energy savings (in KWh) is sent, via GSM, from the
‘Count the Savings’ control centre to the Beghelli
Servizi - Divisione ESCO data bank which automatically
publishes the data on a website accessible to the buyer
with a protected password in a client reserved area.
Beyond checking on the energy consumption, the
client can also see weekly data and the entire savings
amount accumulated in a two-month period since the
beginning of the contract.
A dynamic graph is also displayed which shows the
progression, on an annual basis, of the energy use
listed by month comparing the new equipment to
traditional equipment.
*
* exemplary values
WEB VERIFICATION OF THE
FUNCTIONING OF THE SYSTEM
INTELLIGENT ACTIVATION WITH THE
USE OF AN ASTRONOMICAL TIMER
The integrated supervision system of the counter
allows for a complete diagnosis of the entire lighting
system connected to it.
In case of malfunctioning of a pole, or the burnout of
a lamp, the Control Centre is immediately warned via
radio from the lamppost itself.
The location and nature of the failure are immediately
transmitted via the GSM transmitter to the Beghelli
Servizi - Divisione ESCO data bank which will ensure
prompt intervention and maintenance.
The client may, at any time, check up on the good
functioning of his entire system with this technology
by going to his own personal reserved and password
protected area of www.unmondodiluce.it.
If the system has not been equipped with an
automatic switching system on each lamppost, the
Control Centre can activate an astronomical timer to
regulate the switching on and off of the street lights
according to the season’s sunset and dawn, setting a
predetermined time before or after natural light.
During the night, furthermore, you can selectively
control any number of street lights to reduce their
luminosity thereby further increasing energy savings.
For extraordinary events, weather emergencies or a
public holiday, you can double the amount of light
produced by switching on, in a selective manner, both
lamps of any given lamppost.
15
The Beghelli electronic ballast
The height of technological performance, today, finds its expression in
the optimisation of energy and natural resources savings techniques.
This challenge has been perfectly met with the Beghelli street light, only
one of the elements that make up their “A Planet of Light at Zero Cost”
project: light is an essential part of the environment in which we live and
work, and on the roads it is a primary factor for our safety.
Using the least amount of energy possible to correctly illuminate our
roads is one of the prime duties of our public administrators.
16
17
ENERGY SAVING CONTARISPARMIO
ELECTRONIC DIMMER
The intelligent “heart” of the Beghelli street light is a
unique device, which permits high energy savings
while maintaining high illumination.
Each device has an identifying code of 6 numbers
and/or letters, a micro-controller for the instantaneous
calculation of the amount of energy saved and a
military origin Spread Spectrum radio transmitter of
with 16 different frequencies which detect and inform
the 'Count the Savings’ control centre of the possibility
of a data error, all in real time.
The reliability index is very high (MTBF 100.000 hours)
due to the equally high quality of the components used
and the resin treatment which confers stability to the
feeder regardless of external factors and vibration.
18
SWITCH ON BULB 1
BEFORE BLACK OUT
SWITCH ON BULB 2
AFTER BLACK OUT
IMMEDIATE INTERVENTION IN CASE OF LOSS OF ELECTRICAL CURRENT
THE BEGHELLI STREET LIGHT:
ELECTRONICS AT THE SERVICE
OF ROAD SAFETY
The most important characteristic of the Beghelli
street light is its double lamp feature. Road safety is
increased by the coupling of the light source, its most
important function: should the main lamp temporarily
be out of order the Beghelli electronic ballast instantly
feeds energy to the second lamp and thus prevents
any interruption of street lighting.
Furthermore, if the electrical flow fluctuates a lamp
could switch off provoking a 15 minute blackout before
the same hot lamp can illuminate again (re-arming time).
The Beghelli electronic ballast can compensate for
this type of energy loss making it visually
imperceptible and, furthermore, in the case of a
momentary blackout, the re-lighting is immediate as
the second, cold, lamp is activated, thus avoiding
down time while the main lamp re-arms itself.
19
OPTICAL DISH
FOR MORE UNIFORM LIGHTING
The reflectors of the Beghelli street light are identical in
all of their characteristics, and have been designed to
function independently as well as contemporaneously.
Each dish is made of polished anti-iridescent aluminium
with a complex geometrical surface. The direction of the
flow of light is realised without the need for corrective
ribbing but by the action of a single dish designed with the
help of the most sophisticated optical software available
to obtain a uniform light of the highest quality.
20
In the field of street lighting the control of the quality of
light is fundamental to safety, how it hits the observer’s
eye is more important than even how it hits the street.
This light must maintain a variation able to help
distinguish space perception and prevent reflection
from the road bed, especially in bad weather.
The controlled a variation of the lighting allows, all
things being equal, for a more powerful and uniform
lighting for maximum eye comfort.
RESPECTING REGULATIONS,
ABSENCE OF LIGHT POLLUTION
The Beghelli street light is in conformance with all of
the regional regulations regarding light pollution.
The shape of the dish has been designed to achieve
just the right amount of light when the glass is parallel
to the ground. This prevents the dazzling of drivers as
well as permitting the night sky to be enjoyed. For this
reason the measurements of the Beghelli street light
have been certified by an important Certification
Institute.
The product is also in conformity
with the following regulations :
- CEI EN 60598-1
- CEI EN 60598-2-3
and can be installed on systems in conformity
with UNI11248 series EN 13201.
above: the decline of visibility of stars with the naked eye
below: the artificial brilliance caused by defective lighting of an area
ANTI-REFLECTION GLASS
FOR MAXIMUM
LUMINOUS EFFICIENCY
The parallel face down position of the lamp allows for
more profound lighting as well as taking better advantage
of the reflections directed by the inner dish, especially
designed to offer the best uniform lighting possible.
Furthermore, in order to make best use of the energy fed
to the lamp, a highly transparent anti-reflection glass has
been studied so as not to compromise the width of the
light fall, especially lengthwise along the road.
A critical point of street lights along the road is
determined by reflection factor of the external area of the
glass, that area where the light rays are particularly angled
and where the reflection, or lack thereof, of the inner dish
determines the length of the lit area of the road.
The polar curve of the pole’s light distribution increases the width of the
lit area thanks a high performance system of optical devices.
21
Technical
Characteristics
High energy-saving
street lighting equipment.
THE BEGHELLI STREET LIGHT REPLACES
TRADITIONAL 150 W SAP LIGHTING
AND TRADITIONAL 250 W VM LIGHTING
22
Equipment
description
Adjustable focus,
flexible use
The Beghelli street light is the answer to the need for
a high technology street lighting product. All of its
components have been designed for maximum
reliability over time and for ease of maintenance.
The philosophy behind “A Planet of Light at Zero Cost”
includes the importance of being able to adapt one’s
products to the widest possible range of installations.
The replacement of equipment onto existing street
light is one of the main features of this project, and
the Beghelli street light is up to the task.
When it comes to street lighting the variations are
many: pole height, distance between lampposts,
inclination, type of street to be illuminated, etc… In
order to satisfy all these variables a highly efficient
system, which regulates the focus of the light, has
been designed allowing the light case to be moved
up or down, as well as from side to side. The lamp’s
complex geometrical dish has also been designed
keeping these eventualities in mind: the absence of
corrective ribbing allows for more flexibility during
focus adjustment and for less distortions when
moved.
• Double lamp for immediate re-lighting after a
black-out and needing half the maintenance.
• Dimmerable electronic ballast for high energysavings
• Centralised management of each street light with
pre-set timer switch and light potency regulated
by an astronomical clock
• Polyester-dust painted compressed
aluminium casing to prevent corrosion
fused
• Dish-shaped polished aluminium reflectors
• Tempered thermal shock resistant anti-reflection
glass covers
• Easy-to-reach casing with anti-accidental closing
with a silicon rubber gasket
• Rotating pole head equipped with adjustable
goniometric joint
• New generation SAP-T lamps for maximum
efficiency (more than 110 Lm/W), adjustable focus
ceramic lamp case with silvered contacts
• Isolator switch
• Wires located on a removable plate with rapid
connectors
Lamppost with optional safety lighting when connected
to an emergency centre (pag. 26)
Power
W
L
100+100
656
• Dimensions (mm) •
L1
B
H
638
455
198
lamp
H1
154
SAP-T
Socket Weight
kg
E40
9
Working temperature: -20° C ÷ 40° C
Beghelli Street Light
W
Order Code
Description
Nominal Power
W
MTBF
h
Isolation
Class
Optical Group
Protection level
Light housing
Protection level
100+100
1267
STRADALE 2x100W RX11
110+110
100.000
II
IP66
IP43
Impact resistance
Protection level
IK08
23
Kit RX100
Contarisparmio
Control mechanism
for high energy-saving lighting equipment
24
The “A Planet of Light at Zero Cost” project’s goals
come into being with the energy savings counter. The
calculation’s point of comparison is the average
consumption of lighting equipment installed with a
traditional energy feed.
For a 100+100 W Beghelli street light the comparison
can be drawn against street light using 150 W SAP
lamps, whose energy consumption is estimated at
170 W.
In order to draw a proper comparison a highly reliable
instrument must be used, similar to those used to
measure electricity as prescribed by EN 50470-1 and
EN 50470-3 regulations.
The “Contarisparmio” counter uses this same
technology to read the energy use of each Lamppost
and compare it to the traditional street light.
How the KIT works
Rapid installation
All of the Savings series street light transmit, in real
time via radio, their actual consumption to the
“Contarisparmio” counter. Once received, the
counter transmits the information, via GSM, to the
Beghelli Servizi - ESCO Division data bank for
publication on the website. Each client has his own
reserved area and protected password with which he
can consult the on-line information at any time.
The “Contarisparmio Kit” is delivered already
assembled and ready to be connected. An active SIM
card inside the kit is ready to transmit the data to the
Beghelli Servizi – ESCO Division data bank. All the
installer has to do is mount it on a wall and plug the
device in to an F+N 230V - 50Hz electrical source.
THE CONTARISPARMIO KIT INCLUDES:
•
•
•
•
1
1
1
1
Contarisparmio Counter ( 9 DIN modules)
GSM Interface ( 9 DIN modules)
Bipolar circuit breaker
Shock resistant case with IP65 protection
Power
V-Hz
230-50
• Dimensions (mm) •
L
B
H
14
32
42
Protection
level
Weight
kg
IP65
4.5
H
Contarisparmio System Kit
L
B
Order Code
Description
1200
KIT SISTEMA CONTARISPAR. RX100
25
CENTRALISED
LIGHTING SAFETY
Emergency Management Centre
with centralised batteries
The lighting equipment of the “A Planet of Light at
Zero Cost” project can be integrated into the central
emergency lighting backup system.
The Beghelli street light can be connected to the
emergency management centre without making any
changes to the installed equipment. The electronic
feeder installed on all the street light knows when the
electricity it receives comes from batteries and
automatically activates a preset procedure for these
emergencies, adjusting intensity (from 50% to 100%
of light flow) as well as the duration of the intervention
(autonomy), programmed according to need.
Not only, but as soon as the electronic ballast knows
that the energy it is receiving is from the emergency
centre, it re-routes electricity to the cold lamp (the
one that was off before the blackout) in order to
immediately maintain lighting.
The system configuration is managed by the
‘Contarisparmio’ Kit, which is connected via radio
with all the street lights.
Each individual street lights can be programmed
differently for emergencies. The many different
adjustments and configurations possible let you
manage the street lights when it is in an emergency
mode, using from 50% to 100% of its light flow.
The equipment can be completely personalised with
maximum flexibility and simple intervention
management.
26
Power
W
300
1200
3000
6000
• Dimensions (mm) • Electronic protection
L
B
H
level - Batteries
420
800
800
800
250
400
400
600
500
1110
1520
1520
IP40/IP20
IP40/IP20
IP40/IP20
IP40/IP20
Power supply
V-Hz
230-50
230-50
230-50
230-50
Emergency control centres
POWER
Order Code
Description
300 W
1200 W
3000 W
6000 W
1208
1210
1211
1212
CENTRAL BATTERY RX 300W AC
CENTRAL BATTERY RX 1200W AC
CENTRAL BATTERY RX 3000W AC
CENTRAL BATTERY RX 6000W AC
Remote-control panels
Emergency control centres
CENTRE
300 W
1200-3000-6000 W
1200-3000-6000 W
1200-3000-6000 W
Order Code
Description
1218 QUADRO RX-2 TRIF./4 MONOFASE 24 VAC 300W
1220
QUADRO RX-1 TRIF./2 MONOFASE
1221
QUADRO RX-2 TRIF./4 MONOFASE
1222
QUADRO RX-5 TRIF./10 MONOFASE
Two 300 W line
Emergency control
centre
Two 1200 W line Emergency
control centre
Five 3000 W line
Emergency control centre
Ten 6000 W line
Emergency control centre
An intelligent brain for saving energy
The integrated intelligent radio interface on the street
light and the emergency control centres of the A
World of Light system lets you personalise your
equipment and collect diagnostic information from all
of your street light functions.
This one-of-a-kind technology permits the creation of
centralised emergency control reducing to a
minimum the amount of energy needed for a blackout
intervention.
In case of emergency activation the lamps switch-on
using a pre-set flow of energy which guarantees
adequate autonomy and correct lighting of the street
below.
The traditional centralised systems, in order to perform
in the same manner, need up to ten times the amount
of energy: without the intelligent functions of the World
of Light system, the emergency functions of traditional
street light used 100% of nominal potency and without
the possibility of establishing which street light need to
intervene in case of an emergency.
Setting up the equipment
The Emergency control centre has a centralised group
of batteries and must be connected to the equipment
with a remote-control panel. In emergency situations,
and during periodic tests, the panel connects the lines
to the Emergency Control which in turn feeds them
alternated 56Hz electricity lighting the lamps in their
emergency mode.
Beghelli’s technical assistance service will provide full
details to start up the Emergency control centre and
the remote-control panel in the most appropriate
manner.
The programming of the system to meet the client’s
specifications is done via GSM from the Beghelli
Service centre.
27
RADIO CONNECTION TO EACH BEGHELLI
GSM CONNECTION BETWEEN THE BEGHELLI SERVIZI - ESCO Division CONTROL CENTRE AND DATA BANK
Photovoltaic panels
for Lampposts
Avant-garde electronic technology at the
service of public lighting with clean energy
and producing up to
35% more
energy compared to traditional static
photovoltaic panels
28
PUBLIC
ELECTRICITY
INTERFACE
COLLECTION LINE
LAMPPOST VIA INVERTERS
PHOTOVOLTAIC PANEL PRODUCTION COLLECTION LINE
PLANETSUN
CONTROL CENTRE
50%
energy production
“at zero cost”
The “A Planet of Light at Zero Cost” project can be integrated into the
Photovoltaic PlanetSun system while maintaining the same contract
conditions.
50% of the energy produced will be at the disposal of the client without any
further investment, while the other 50% and the economic benefits there from
will go the Beghelli Servizi - ESCO Division
29
DOUBLE AXIS MOVEMENT
FOR MAXIMUM ENERGY
GENERATION
The PlanetSun photovoltaic system’s solar technology is based on a series of micro-movements able to
track the sun from dawn to dusk.
7.00
10.00
12.00
Beghelli technology uses two types of
micro-movements:
• Rotation on the axis of the pole
(azimuthal)
• Change of panel tilt
(zenithal)
16.00
In order for the sun’s energy to be absorbed in the
most efficient manner, the sun must shine on the
panel’s cells at a certain angle. This depends on the
tilt of the panel. The more it hits the panel at right
angles, the more efficient the energy absorption.
19.00
30
DISTRIBUTED GENERATION SYSTEM
WITH INTEGRATED INVERTER
In order to get the most out of a photovoltaic energy
generation system on street lights the transformation
of 230 Vca energy produced must take place on the
pole itself.
The absence of a centralised inverter resolves the
problem of the mismatch provoked by differences in
local sun intensity.
Each set of 3 modules produces energy
independently from the others, thus rendering
maximum potency.
AUTOMATIC NIGHT POSITION
The photovoltaic set is mounted on the Beghelli
street lights keeping in mind the orientation of the
cardinal points. Situations have arisen in which the
solar panels interferes with the lighting area of the
pole, causing shadows or uncontrolled reflections
which could inhibit the correct functioning of the
street lights itself.
The PlanetSun system can be pointed exactly south
without having to worry about a possible interference
with the light, thanks to the automated “rest” function
of the panels. The lights on the Beghelli street lights
are switched-on via a command from an astronomic
clock that takes the sun’s movement into account all
year round: the command to switch on the lights in the
evening activates the “rest” position of the panels
command, straightening them out and folding them
inwards towards the lamppost on the side opposite
from the lamp. At dawn the order is recalled and the
panels return to their working position.
FULL MAINTENANCE SERVICE:
TECHNICAL AND ANTI-THEFT
ASSISTANCE
Any anomaly that occurs sets off an alarm which is
seen in real time by our staff who then activate the
assistance service. Solar panels are most prone to
theft attempts if they are located in isolated areas.
Should this occur, the anti-theft sensor integrated
into the system’s electronic components sets off an
alarm which, via GSM, appears on the monitors
supervised by our staff at the service centre. The
client, or his security service, is immediately alerted
via text message to his mobile phone.
Palo della luce Beghelli
PRODUZIONE ENERGETICA GIORNALIERA
Dati rilevati dal Palo della Luce Beghelli nel mese di aprile 2008,
in una giornata di tempo variabile
Online photovoltaic production control
31
PlanetSun control centre
The PlanetSun control centre groups together all of
the elements in order to efficiently manage, control
and transmit data from the Lampposts:
- Supervisory module: an elaboration unit to coordinate the various parts of the system and collect diagnostic and energy generation data
- GSM module: incorporates a GSM modem for the
remote management of the system from the Beghelli
Servizi - ESCO Division operations centre in order to
monitor the energy generated, analyse the correct
working order of each module and manage diagnosis
- Network connection interface: the inverter’s
device connecting it to the electrical supply is in conformity with the technical specifications of hook-up to
the city power grid. This device manages the disconnection, when necessary, from the city power grid as
well as measuring the amount of energy generated.
Order Code
L
• Dimensions (mm) •
B
H
15300
43
50
20
15310 *
43
66
15
* does not include remote control device or transformers
Technical characteristics of the Panet Sun Central cod. 15300
Technical characteristics of the Panet Sun Central cod. 15310
Voltage
Voltage
Line Voltage
Line Voltage
Amperage Input
Amperage Input
Power Absorption
Power Absorption
Incorporated Battery Backup
Incorporated Battery Backup
Internally pre-wired
Order Code
Description
notes
15300
15310
PLANETSUN CENTRE mono/tri-phase up to 20 kWp
PLANETSUN CENTRE tri-phase 20-400 kWp
Mono-phase and tri-phase centre up to 20 kWp (includes sectioning remote control devices)
Tri-phase centre up to 20-400 kWp. Does not include sectioning remote control devices
(planner’s choice) or current transformers
CENTRE ACCESSORIES cod. 15310 - to be ordered separately
Order Code
Description
notes
15700
15701
15702
KIT 3TA 20-100 kWp
KIT 3TA 100-200 kWp
KIT 3TA 200-400 kWp
Tri-phase ammeteric transformer 20-100 kW max
Tri-phase ammeteric transformer 100-200 kW max
Tri-phase ammeteric transformer 200-400 kW max
32
Photovoltaic sets for Beghelli street lights
The solar set is composed of three polycrystalline
silicon cell photovoltaic panels. Beghelli technology
has designed it for two types of micro- movements:
rotating on the street lights axis (azimuthal) and
change of panel tilt (zenithal).
The integrated inverter transforms the continuous
current from the photovoltaic production into 230 Vca.
The inverter has an incorporated FHDSSS radio
module which puts it in contact with the supervisory
module and has a special MPPT function. Even the
electronic control of the motor guiding the movement
of the photovoltaic panels, is located in the converter.
The motor which moves the photovoltaic panels is
guided by a patented device, integrated into the
inverter, which finds the best position for the panels
according to the astronomical clock.
The modules are connected to one another and the
set is inserted at the entrance of the inverter.
Photovoltaic modules
• High reliability with up to 80% energy output
even after 20 years use
• Certifications: CEI-EN 61215, CEI-EN 61730
• Isolation class II
Inverter
• Isolation class I
• IP66 protection level
Technical characteristics
(average values)
Peek Power
Open Circuit Voltage (Voc)
Input Short Current (ISC)
Voltage Maximum Output (Vmpp)
Input Maximum Power (Impp)
L
• Dimensions (mm) •
B
H
1200
1650
350
Order Code
Description
notes
15552
PHOTOVOLTAIC SET FOR STREET LIGHT
Double axis movement: azimuthal and zenithal
33
Technical characteristics summary
LAMPPOST
pag. 22
EMERGENCY CONTROL CENTRE KIT RX100
IP43 IP66 IK08
OTTICA LOUVER
OTTICA
HOUSING
pag. 24
IP65
OTTICA
IMPACT
230V
50Hz
F
230V
50Hz
F
SAP-T
2 LINE 300 W EMERGENCY CONTROL CENTRE
pag. 26
2 IP20
LINES IP40
2 LINE 1200 W EMERGENCY CONTROL CENTRE
34
230V
50Hz
F
pag. 26
5 IP20
LINES IP40
F
pag. 26
2 IP20
LINES IP40
5 LINE 3000 W EMERGENCY CONTROL CENTRE
230V
50Hz
10 LINE 6000 W EMERGENCY CONTROL CENTRE
230V
50Hz
F
pag. 26
10 IP20
LINES IP40
230V
50Hz
F
Technical characteristics summary
PHOTOVOLTAIC SET FOR BEGHELLI LAMPPOST
pag. 33
IP66 IK08
OTTICA
IMPACT
230V
50Hz
F
PLANETSUN CONTROL CENTRE
pag. 32
IP65
230V
50Hz
F
35
Symbols
Devices with Class II isolation levels
Devices not bearing this symbol should
be considered Class I
16 channel radio system to transfer data
with a CRC error detection system
and algorithm back-off
GSM transmission of energy savings data
to the Beghelli Servizi - ESCO Division
data bank
IK08
OTTICA
IMPACT
Impact protection level
in conformity with the testing methods
(as per EN 50102)
IP66
External factors protection level
(as per CEI EN 60598-1)
IP43
Protection level from external factors of a part
of the device (electrical housing, optical group)
(as per CEI EN 60598-1)
OTTICA
LOUVER
SAP-T
High pressure tubular sodium lamp
Devices in conformity with the
Applicable European Union regulations
F
Devices can be installed on
normally non-flammable surfaces.
3
LINES
Emergency energy exit feed lines
600 W maximum potency per line
The technical and aesthetic characteristics of the products shown in this catalogue may change without warning.
36
xxx.xxx.xxx