HONEYWELL VALVES Honeywell valves are available in 2-way and 3-way configurations for the control of steam, water, and water with glycol mediums. They are available in various sizes to provide control for heating and cooling HVAC applications. Correct valve sizing is critical for good temperature control, economic operation, and long equipment life. Honey well Actuators Honeywell's complete portfolio of actuators for dampers and valves include pneumatic, footmounted, kit-mounted and direct coupled models. They can be used for a variety of applications in HVAC systems. Damper Actuators Direct Coupled Actuators mount directly to the external shaft of dampers. Non-Spring Return , Spring Return , Transducers , Damper Actuator Parts and Accessories Foot-Mounted Motors Spring return and Non-Spring return, foot-mounted actuators provide two-position, SPDT floating, or modulating control of Globe valves and HVAC dampers Valve Actuators Direct Coupled , Fan Coil Actuators , Cartridge Cage Valve Actuators , Cartridge Globe Actuators ML7421 Honeywell ML7275 spring return direct coupled actuators provide proportional control for dampers. It uses a current or voltage signal from an electronic controller to position a damper at any point between fully open/closed. VC Series Fail Safe Proportional Actuators Control central heating and/or cooling systems, fan coil systems, radiators and convectors. Depending on the model selected, it can be controlled by either a low or line voltage SPST or SPDT or floating or modulating controller. VC Series Two-position Actuators Control central heating and/or cooling systems, fan coil systems, radiators and convectors. Depending on the model selected, it can be controlled by either a low or line voltage SPST or SPDT controller such as a room thermostat. ML7420 Honeywell ML7174 is used to control dampers in HVAC application and for mounting on ball valves. Use with modulating (2-10 Vdc) thermostats or building automation controls M7410 Cartridge Globe Valve Actuator are small electric actuators for individual room control that provide floating or modulating control of V5852, V5862 two-way or V5853, V5863 three-way valves. Direct Coupled Valve Actuator Accessories and Parts M6435 Cartridge Globe Valve Spring Return Actuators are small electric actuators for individual room control that provide floating or modulating control of V5852, V5862 two-way or V5853, V5863 three-way valves. ML6984 Honeywell ML6421A, B non-spring return electic linear valve actuators are used with low-voltage, singlepole, double-throw (SPDT), Series 60 two-position and floating controlling. They operatre standard Honeywell valves in HVAC applications. VU843 The VU843 humidity resistant, Fan Coil Valve Actuators are used in conjunction with VU52, VU53 and VU54 valves for controlling the flow of hot or chilled water in commercial HVAC equipment such as fan coil units, terminal reheat coils and convectors. VC Series Proportional Actuators Control central heating and cooling, fan coil systems, radiators and convectors. Depending on the model, it can be controlled by a low voltage SPST or SPDT switch, pulse-width modulated 24 Vac signal, or floating input, modulating controller. ML6420 Honeywell ML6195 spring return direct coupled actuator is a floating control motor which provides switched or floating single-pole, double-throw (SPDT) control to operate dampers and valves in HVAC applications. ML6425 Honeywell ML6284 non-spring return direct coupled damper actuator provides single-pole, doublethrough (SPDT) floating control of damples in HVAC applications. VU844 The VU844 humidity resistant, Fan Coil Valve Actuators are used in conjunction with VU52, VU53 and VU54 valves for controlling the flow of hot or chilled water in commercial HVAC equipment such as fan coil units, terminal reheat coils and convectors. M7435 Cartridge Globe Valve Spring Return Actuators are small electric actuators for individual room control that provide floating or modulating control of V5852, V5862 two-way or V5853, V5863 three-way valves. VU443 VU443 Fan Coil Valve Actuators are used with the VU52, VU53 and VU54 valves to control the flow of hot or chilled water in commercial HVAC equipment. They are humidity resistant and suitable for use in condensing, non-corrosive environments. ML7984 Honeywell ML7285 spring return direct coupled actuators provide proportional damper control. It uses a current or voltage signal from an electronic controller to position a damper at any point between fully open/closed. ML6421 Honeywell ML6275 spring return direct couple rotary actuator is a floating control motor with electronically isolated feedback potentiometer to operate dampers in HVAC applications. M6410 Cartridge Globe Valve Actuator are small electric actuators for individual room control that provide floating or modulating control of V5852, V5862 two-way or V5853, V5863 three-way valves. VU444 The VU444 humidity resistant, Fan Coil Valve Actuators are used in conjunction with VU52, VU53 and VU54 valves for controlling the flow of hot or chilled water in commercial HVAC equipment such as fan coil units, terminal reheat coils and convectors. ML7425 Honeywell ML7284 non-spring return direct coupled damper actuators provide portioning damper control in HVAC applications. It uses a current or voltage signal from an electronic controller to position a damper at any point between fully open/closed. Honeywell VALVES Water and Steam Valves Honeywell valves, available in 2-way and 3-way configurations, control steam, water and water with glycol mediums, in heating and cooling HVAC applications. Various sizes, ensure a correct fit, to promote economic operation and long equipment life. Balancing Valves Cage Valves Cartridge cage valves combine high Cv with high close-off ratings for both on-off and proportional control in unitary applications. Ball Valves Honeywell Ball Valve assemblies for two-position or modulating control of hot/chilled water with glycol solutions up to 50%. Available with or without an actuator, in two-way and three-way configurations, in sizes from 1/2 to 2-in. Butterfly Valves Honeywell butterfly valves offer two-position and modulating control for chilled, hot or cooling tower water systems. Honeywell carries pipe sizes from 2 to 20-in. for both two-way and three-way applications. Cartridge Cage Valves Cartridge cage valves combine high Cv with high close-off ratings for both on-off and proportional control in unitary applications. Cartridge Globe Valves Cartridge globe valves are ideal for VAV reheat, modulating fan coil and modulating hydronic zoning applications. They are small and easy to install where space is limited. Fan Coil Valves Humidity resistant, fan coil valves are used in conjunction with VU443, VU444, and VU843, VU844 Fan Coil Actuators for controlling the flow of hot or chilled water in commercial HVAC equipment; fan coil units, terminal reheat coils and convectors.