lighting partner - a “Go GREEN with LED” initiative Technology Leadership Award, 2013 Electronic Industry Excellence Awards Technology Leadership of the Year in the LED Lighting Market Presented to Instapower Ltd. has been bestowed upon us for our untiring efforts in R&D to design innovative, high quality, energy efficient and rugged products for LED lighting for a wide variety of specialized applications including Residential and Commercial use. We thank our valuable clients for patronizing our products. Corporate Profile l 01 About Instapower INSTAPOWER, a TUV certified ISO 9001 & 14001 organization, has been a leading name in power electronics for over two decades. Promoted by an alumnus of IIT Delhi, Instapower is recognized as an R&D house by the Department of Scientific and Industrial Research, Government of India. The Bureau of Energy Efficiency, Government of India, recognizes Instapower as an ESCO organization. It is one of the six companies for LED products empaneled with CPWD, under the aegis of Ministry of Urban Development, Government of India. Instapower's management comprises top professionals from various prestigious universities from all over the world. It has two manufacturing units, equipped with state of the art manufacturing and testing equipment, employing over 150 personnel. It manufactures over a 100 products, has filed over 47 patents and over 40 design patents in the area of LED lighting. Instapower is the largest manufacturer of LED Aviation Obstruction lights in India and has over 300,000 LED Aviation Warning lights installed in India and other countries. The other products successfully commissioned are LED Street Light, Ceiling Light, Downlights & Architectural Lights.. Instapower's vast product range is well accepted by various government, semi-government organizations / institutions and private companies and has received satisfactory performance test certificates from them. The key client list comprises of such names as CPWD, NTPC, PGCIL, DDA, Haryana Government, BSNL, Airtel, Vodafone, Nokia, Indian Railways, BHEL, L&T, DMRC, NBCC, IOCL, ONGC, GAIL, OBC, Apollo Hospital, RML Hospital, Coal fields, Municipal Corporations, Architects, Electrical & Lighting Consultants. Its products have been supplied and installed at such prestigious places as The Rashtrapati Bhawan and Parliament House, India Gate amongst many others. Products are also being exported to over 25 countries in Africa, South East Asia, Middle East and South America besides UK, USA and Australia. Corporate Office Gurgaon, HR (India) Manufacturing Unit Roorkee, UK (India) Registered Office New Delhi (India) 02 l Corporate Profile Our Manufacturing Unit To meet the latest market demands, we are backed by a well equipped manufacturing unit with latest equipment and machines. Based on advanced and sophisticated technology, the different machines installed at our unit are capable of achieving our target production with full accuracy and quality. At our manufacturing unit, we make sure that the lighting system and lights developed by us, undergo the necessary quality checks before being dispatched to the clients. We also ensure that all the machines are operated under the surveillance of expert engineers and are regularly maintained to make sure that the production process remains hindrance free. Our Fully Integrated Facilities includes: Packaging Storage Unit We understand the importance of safe packaging of lighting systems. Utilizing advanced packaging machines and technology, we offer our products in durable packing and then they are packed in corrugated boxes. Each and every product is individually packed that helps in safe delivery to the clients' We have a spacious warehouse which is capable of holding massive stocks. Segregated into different sections, our storage unit is facilitated with 24 hour on-site security. Our warehousing experts ensure that the lighting systems, being delicate items, are handled carefully. They also make sure that the similar products are kept together at one place that assist in avoiding any kind of hassles at the time of delivery. Our Team Our success in this industry is the result of the hard work of our manpower. Our team comprises of engineers, technocrats, marketing managers, quality controllers, Industrial product designers, R & D personnel, packaging as well as warehousing experts. To enhance skill sets of our team, we continuously engage in various technical and marketing training. approvals have more than 87 Corporate Profile l 03 inhouse R&D centre design patents certificationsmanufacturing over recognized inhouse R&D centre by the DSIR, pprovalss have more than 20 100 international patents products Govt. of India international patents certifications Why Us Instapower has developed the technology behind LED-lighting systems after investing many man-years in R&D, mastering the technology – electronics and optics. Instapower and its founder have filed more than 90 patents in India and abroad in the area of LED lighting and energy efficiency. LED's are incredibly long lasting, energy efficient, virtually unbreakable, versatile, directional and, most important of all, environmentally friendly, saving emissions of millions of tons of carbon dioxide into the atmosphere from use of incandescent bulbs which only convert about 5% of electrical energy to light, wasting the rest. Achievements Recognized by the Ministry of Science & Technology as one of the very few R&D Development Centre in India for Lighting. Empanelled by the Bureau of Energy Efficiency, Ministry of Power as an ESCO organization. Product Approval in most of the prestigious institutions like CPWD, MES, BSNL, BHEL, RDSO, PGCIL, etc. Awarded honors and accolades by Head of the States. Only company in India to have been manufacturing a diverse range of products under one roof. Quality We, at Instapower, believe that it is critical for our products to have standard testing procedure and strict quality compliances as per ISO 9001. Therefore, to deliver the best quality products, we have followed a quality management process that adheres to international standards. We are backed by a pool of quality personnel who regularly check the production process to ensure that we leave no loopholes for any kind of flaws to occur. The quality testing process enables us to test our products on all different parameters such as: Illumination & spread of Light. Efficiency. Total Harmonic Distortion. Ingress Protection. EMI/EMC. HVT/Surge Test. Thermal Imaging. In-circuit testing. Vibration Test. Only after individually checking each and every piece, the quality inspectors forward them to the market. 04 l Corporate Profile Resources & Facilities INSTAPOWER's unique blend of providing high caliber manufacturing services, flexibility and responsiveness to customer needs, and ability to provide a full range of product testing services makes it a strong asset for any Customer. A state-of-the-art 30,000 sq ft manufacturing and testing unit at Roorkee, Uttarakhand, where it is manufacturing a diverse product range of Energy Efficient Lighting solutions - from LED Lighting Systems. INSTAPOWER has an immense knowledge base and unmatched technical expertise in engineering competence in LED Lighting Industry. We have a dedicated, skilled and trained human resource that is customer oriented by fully geared to meeting the specific needs of the customers. Operational efficiency and customer support are enhanced by the use of various productive tools and systems. Our manpower works on the following principle: Self discipline Sharing of thoughts and ideas Frequent feedbacks Systematic written communication Strong work ethics Belief in preventive rather than corrective action Customer is the KING Corporate Profile l 05 Advantages of G reen Technology Light-emitting diodes (LEDs) are solid-state devices that convert electric energy directly into light of a single colour. Because they employ “cold” light generation technology, in which most of the energy is delivered in the visible spectrum, LEDs don't waste energy in the form of heat. In comparison, most of the energy in an incandescent lamp is in the infrared (or non-visible) portion of the spectrum. Fluorescent and HID lamps produce a great deal of heat. Instapower's LED lighting solution offer the following advantages: It reduces the power consumption by 60% and therefore saving of electricity costs. It comes with a 2 years warranty. ROI is within 2 years. The life of the product is more than 10 years. Fit it Forget it. The power backup load (Generator), Cable Size will reduce significantly. For Indoor lighting the AC load will reduce and the Air conditioning will become more effective. Huge saving in operational cost & maintenance cost. In case of Solar Installations the battery and solar size will reduce significantly. There is no mercury content therefore Environment friendly. Promotes Green Technology. The common area load can be directly connected to Solar Panels as per the Green Building norms. We provide customized and complete end to end solutions. RoHS Compliant products. 06 l Corporate Profile Energy Saving Calculator Electricity Cost per unit in Number of units consumed per Annum for the LED Load Electricity cost per Annum for LED Load Number of Units consumed per annum for Normal Light Load Electricity cost per annum for Normal light Load Annual Savings in (Normal Lights- LED lights) 12 40 6 79 473 175 1051 578 2480 1000 5800 48 LED Ceiling Light of 30W replacing 4X14W of FTL Tube 30 12 70 6 131 788 306 1839 1051 4500 1200 9900 42 120 12 295 6 526 3154 1292 7752 4599 14600 2000 30000 43 36 12 96 6 158 946 394 2365 1419 6000 2000 15000 38 LED Street Light of 120W Zenith replacing 250W of HPSV LED Street Light of 36W replacing 70W of HPSV Product Type Test Report Initial cost of LED fitting Existing Light load in Watt 18 Maintenance Cost per annum for Normal Lights Hours of use in a day LED Down Light of 18W D-LITE LX replacing 2X18W of CFL Name of the LED Product Initial cost for normal fitting Light load in Watt (LED) ROI to customer per annum (in %) Comparison between LED lights and existing light fittings Approvals & Certifications (LABORATORY & STANDARDS) ERTL ISO 9001 Certification ERDA ISO 14001 Certification UL R&D Unit Approval, Ministry of Science & Technology IIT (Delhi) CPWD CIRT, Pune BHEL IS 10322 PGCIL IEC 61000-4-2-3-4,5 MNRE approved Solar LED Street Light IEC 61347-2-13 MNRE approved Solar LED Lantern IEC 60571 MNRE approved Solar LED Home Light IEC 60529 RDSO approval for LED Railway Signalling IEC 62384 RDSO approval for LED Emergency Light IEC 61547 RDSO approval for LED Signages IEC and many more. LM 79 IP 65/43/20 CISPR 11 Corporate Profile l 07 Lighting Design Software Instapower offers end to end solutions for lighting design using Dialux & Relux. These software help in planning the architect / electrical consultants the lighting level required. Indoor Illuminance 1 2 Outdoor Illuminance 1 Luminaire: VERSAT-2, 48W LED Street Light Luminous flux (Luminaire): 4393 lm Luminous flux (Lamps): 4393 lm Luminaire Wattage: 48.1 W Arrangement: Single row, bottom Pole Distance: Mounting Height (1): 18.000 m 5.000 m 2 3 08 l Corporate Profile Patents Ceiling Light Post Top Lantern Aviation Light LED Street Light Spot Light LED Bulb Corporate Profile l 09 Patents 252680 - "An improved device for converging/ diverging led (s) light at a required distance" Granted Indian Patents Granted International Patent: 08 No. Of Design Patents: 32 No. Of Patents Pending: 47 10 l Corporate Profile ISO 9001 Certification Corporate Profile l 11 ISO 14001 Certification 12 l Corporate Profile Approvals & Certifications DSIR Approval CPWD Approval Govt. of India (Technology Application and Standards Unit) Central Public Works Department Nirman Bhawan, New Delhi No : 147/SE(TAS)/App. Of Consultant/2010/187-E GOVERNMENT OF INDIA MINISTRY OF SCIENCE AND TECHNOLOGY Department of Scientific and Industrial research Technology Bhawan New Mehrauli Road, New Delhi-110016 BY REGISTERED POST F.NO. TU/IV-RD/2702/2012 Dated: 2 April, 2012 To M/s Instapower Ltd. S-19,Panchshilla Park New Delhi-110017 Delhi Dated: 6/7/2010 Office Memorandum As per the recommendations contained in the interim report of Products Approval Committee for LED Lighting Fixtures submitted to this Directorate vide no. 26(4)/CE(E)/DR/SE(E)S&S/2001/361 dated 16/6/2010, the Director General of Works is pleased to approve the following six firms provisionally for a period of two years or till the outcome of final report whichever is earlier. 1. 2. 3. 4. 5. 6. M/s Philips M/s Osram M/s Wipro M/s Crompton M/s Bajaj M/s Instapower However, above provisional approval is subject to the following limitations and conditions: Subject : RENEWAL OF RECOGNITION OF IN-HOUSE R&D UNIT (S) Dear Sirs, This has reference to your application for renewal of recognition of your In-House R&D unit(s) beyond 31-03-2012 by the Department of Scoentific and Industrial Research. 2. This is to inform you that it has been decided to accord renewal of recognition to the In-House R&D unit(s) of your firm at 457 Udyog Vihar,Phase V,Gurgaon(HR) upto 31.03.2016. Terms and conditions pertaining to this recognition are given overleaf. 3. Kindly acknowledge the receipt of this letter. Yours Faithfully, (K.V.S.P. Rao) Scientist-'G' 1. Since the LED fixtures are very expensive, decision to provide LED fittings be taken selectively and where it is considered to do so in the interest of work. 2. Feedback on the performance of LED fittings be sent to S&S Unit for consideration. 3. While selecting LED fittings suitable guarantee be taken from the manufacturer for life and quality of the fittings. 4. NIT approving authority to decide technical requirements and in accordance with CVC guidelines. 5. The matter will be placed before Specification Committee for E&M Works for wider consultation and recommending guidelines for selection of LED fittings for various applications and for implementation of NMCC's recommendation. 6. Based on feedback, application of LED fittings be increased gradually. 7. The matter to be reviewed after standard & test protocol of LED fittings are issued by BIS and test facilities are established by CPRI. The approval given above does not absolve the executive/supervisory officer from their overall responsibility for using this product. It is only after they are satisfied about the quality, rate and performance; the product shall be used. To achieve this, proper check on the quality of the product actually to be used should be exercised. This issues with the approval of DG(W). Superintending Engineer (TAS) Copy to: The PPS to the Director General (Works), CPWD, A-Wing, Nirman Bhawan, New Delhi-110011. BHEL Approval RDSO Approval for Emergency Light : 2451200 (PBX) 2450115 (DID) : 91-0522-2458500 Project Engineering Management Government of India - Ministry of Railways Research Designs & Standards Organisation Lucknow - 226011 Bharat Heavy Electricals Limited (A Govt. Of India Undertaking) To PEE30-SVD-4CO-NK 06.09.2010 File NO. EL/6.4.6/Instapower Dated: 11.10. 2010 M/s Instapower Ltd. M/s Instapower Ltd. S-19, Panchshilla Park, New Delhi-110017 Attn: Satyajit R Vaish (Executive Director) Subject: Sub-Vendor registration for Aviation Obstruction Lights Sir, 1. We are pleased to inform that you have been enlisted for the supply of LED based Low and Medium Intensity Aviation Obstruction Lights and Xenon based High intensity aviation obstruction lights. 2. In order to complete and participate in tenders, please contact our main vendor. 3. Under no circumstances, BHEL will resolve any dispute between our main vendor & your company. 4. All future changes in your company structure, organisation, equipment & testing facilities may please be immediately communicated to us. 5. In the month of April every year following information shall be furnished in two setsa) Details of major jobs executed. b) Financial Report of the reporting year. c) Latest catalogues. 6. Your registration no is INS1 Please quote this number in all future correspondence with us and with our main vendor. 7. We hope that you will maintain a good customer supplies relationship by helping us in meeting out commitments for the projects. 8. Sub-vendor's enlistment will be reviewed after a period of two years based on performance certificate of the products for the current ongoing projects including thermal power stations. 9. Please note that this registration letter supersedes our earlier registration letter dated 26-02-2010 on the same subject. Please acknowledge the receipt of this letter. Thanking You. Yours Faithfully, For & on behalf of BHEL Nilesh Kamal Sr. Engineer (PEM-Electrical) Office address: M/s Instapower Ltd. S-19,Panchshilla Park New Delhi-110017 Work address: M/s Instapower Ltd. Khasra No. 103, Raipur Industrial Area, 15.5 Km, Roorkee Dehradun Highway Uttaranchal 247661 FAX NO. 011-26014770 Dear Sir, Sub: Prototype test of Emergency Light Unit of M/s Instapower Ltd and approval as part-II (two) vendor Ref: Your letter no nil dated 17-08-2010 and prototype test on 09-09-2010 M/s Instapower Ltd Khasra No 103,Raipur Industrial area ,Roorkee Dehradun Highway, Uttranchal has been registered as an approved vendor in category Part-II (Two) for manufacture and supply of Emergency Light Unit for rolling stock per ICF specification No. ICF/Elec/917 (Rev-1) to Railways and Production Units. The registration is valid for 2 years i.e. upto 31-10-2012, subject to the following condition: 1. The supply,generally, will meet the requirement of the specification. 2. No design change or the change in Bill of Material shall be made without the prior approval of RDSO. 3. Notwithstanding this approval, vendor is wholly and completely responsible for quality, on line performance, reliability and life of the items supplied by him. 4. Complete compliance to the conditions given in Purchase Order of Railway Board/ Railways/ Production Units. 5. All future changes in equipment, facilities and establishment at your works should be promptly communicated to PS & EMU Directorate of RDSO, Lucknow. 6. Quality documents approved by RDSO shall be made available to the inspection agency at the time of inspection. Corporate Profile l 13 Approvals & Certifications RDSO Approval for Railway Signaling Phone: Off -91-522-2465750 Res -91-522-2462610 Rly: Off - 42652 Fax: 91-522-2452332 e-mail: dsig2@rdso.railnet.gov.in No. STS/E/EL-LED/ Instapower -Vol-II MNRE Approval for Solar Lantern, Solar Energy Centre Director (Signal) Room No. 205, IInd floor, Annexe-I Building, RDSO, Ministry of Railways, Manak Nagar, LUCKNOW-226011 (UP) INDIA File No.08/2013/CSC/SEC 498 Government of India Ministry of New & Renewable Energy Solar Energy Centre By Speed Post 19th Milestone, Gurgaon-Faridabad Road, P.O. Gwal Pahari, Distt. Gurgaon, Haryana Telefax No. 0124-2579207 Dated: 12.09.2011 Dated: 12.06.2013 M/s Instapower Ltd. 457, Phase V, Udyog Vihar, Gurgaon - 122016 Sub: To M/s Instapower Ltd., Gurgaon 457, Udyog Vihar, Phase V, Gurgaon - 122001 Clearance for field trial of LED Signal lamp for Main colour light signals for Railway signalling as per RDSO specification no. RDSO/SPN/199/2010 (Draft) of M/s Instapower Ltd, Gurgaon. Subject: Forwarding of Test Report – Reg. Ref: Your letter dated 09/04/12013 submitting LED Solar Lantern testing for at SEC Dear Sir, Your prototype samples of 110V AC LED Signal lamp for Main Colour Light signals for Railway signalling have been evaluated as per RDSO specification no.RDSO/SPN/199/2010 (Draft) Please refer to your letter cited under reference on the above subject. In this connection I am directed to enclose herewith the Test Report No. 143/1013/2013/1/1/SL in respect of your submitted samples in original, for ready reference and record. Based on evaluation, competent authority (Sr.ED/Sig) has approved for manufacture and supply of 500 nos. of LED Signal lamp for Main colour light signals for Railway signalling for field trial subject to following terms and conditions: Discrepancies, if any observed, in respect of any of the entries contained in the above report should be brought to the notice of this office within 30 days from the date of issue of this letter, failing which it will be presumed that the entries therein are in order and no further correspondence will be entertained thereafter in this particular report. a) No modification without necessary permission/approval from RDSO is permitted in design(Hardware/Software), process, raw material/components, engineering and /or facilities in the approved model subsequent to the issue of this certificate. Any modification in the product shall lead to the cancellation of approval. Further you are also requested to collect your samples at your cost within 30 days, positively, from the date of issue of this letter failing which SEC will not be responsible for the loss/damage for your sample. b) RDSO reserves the right to inspect this product at any premises where it is in use or at the place of manyufacturer. If any deterioration of performance of the approved product is noticed during use, RDSO reserves the right to cancel the approval. I am enclosing a Feed Back Form. I request you to fill up this form and send us the same as soon as possible. Your suggestions are very valuable for us to make our further planning/corrective action/ improving the quality of service. Kindly acknowledge the receipt. c) In case of any dispute at any stage, verdict of the competent authority of RDSO shall be final and binding on the manufacturer. The above approval shall purely be tentative and shall be applicable subject to approval of LED signal lamps as per RDSO specification No RDSO/SPN/199/2010 (Draft) by Railway board. Rajneesh Kumar) Director Signal - EM for Director General/Signal Power Grid Corporation of India Limited (PGCIL) for LED Products Power Grid Corporation of India Limited (PGCIL) for LED Products C/ENGG/AUX/ZERO ENGG/LS/INSTA DATE: 21.02.2013 M/s Instapower Ltd. S-19, Panchshilla Park, New Delhi-110017 Dear Sir, Annexure-I DATE: 21.02.2013 REF: C/ENGG/AUX/ZERO ENGG/LS/INSTA Attn : Mr. Abhijit R Vaish - Executive Director SUB: LED LUMINARIES OF INSTAPOWER MAKE AGAINST TECHNICAL SPECIFICATION NOC/ENGG/SPEC/LS REV. NO: 05 S. No. Tests A PHOTOMETRY REPORTS (As per IES LM-79-08) INSTAPOWER MAKE Re: Standard Approval of GTP & Photometry Report as per Annexure. Please refer to your submission of test reports pertaining to LED Luminaries vide letter ref; Nil dated 3-1-2013 therein submitting subject documents for our acceptance. This is in continuation to our earlier approval vide even reference letter dated 22-10-12. The test certificates and GTPs have been reviewed at our end and our observation/acceptance on the same is given under Annexure-I. Acceptance/Approval conveyed herein neither relieve the sub-vendor/contractor for subject items(s) of his contractual obligations and his responsibilities for correctness of dimensions, material or constructions, weight quantities, design details, assemble kits,performance particulars and conformity of the supplies with the Indian statutory Laws, as may be applicable , nor does it limit the Purchase's right under the specific contract. Additional Remarks: 1. The approval/acceptance conveyed herein is generally applicable with Rev 05 of subject lighting technical specification for supply & installation of items listed in Annexure. In case of any change in the revision of technical specification, separate approval shall be obtained by manufacturer. 2. The approval does not cover any specific requirements, if any of a particular project. Approval in this regard is to be obtained separately by the concerned project group. 3. The contractor shall obtain Project specific approval for supply of subject item(s) by extention of this approval as applicable. Test Report No Remarks 1 2x2,luminaries Type INSTA-PRISMA 45 W 6012-003018-02-01 dated 8-11-12 issued by UL Gurgaon Acceptable 2 19 W, Recessed type LED luminaries, Type INSTA DL-19W 6SH 6012-003018-03-03 dated 9-11-12 issued by UL Gurgaon Acceptable 3 Street lighting luminaries Type VERSAT-2-48 6012-003018-01-01 dated 1-11-12 issued by UL Gurgaon Acceptable B TECHNICAL DATAS (for luminaries) INSTAPOWER MAKE Type 1 2x2,luminaries INSTA-PRISMA 45 W Acceptable 2 19 W, Recessed type LED luminaries INSTA DL-19W-6SH Acceptable 3 Street lighting luminaries VERSAT-2-48 Acceptable Thanking You, Yours faithfully, (SUDHAKAR GUPTA) Chief Design Engineer Engineering Department Yours faithfully, (SUDHAKAR GUPTA) Chief Design Engineer Engineering Department 14 l Corporate Profile Approvals & Certifications DGS & D Approval for LED Products Government of India Ministry of Commerce and Industry Department of Commerce Directorate General of Supplies & Disposals Tel: 011-23363513, 23361899 Fax: 011-23361899 Telegram: E-mail: Website: http://dgsnd.gov.in To M/s Instapower Ltd (Supplier Code : 06563) S-19 Panchshila Park,New Delhi-110017 Digitally signed by: A Saleem E-Mail Id: asaleem@dgsnd.gov.in Director (QA), Delhi Directorate Jeevan Tara Building, 4th Floor,Sansad Marg New Delhi-110001 Dated: 04.07.2013 REGISTRATION CERTIFICATE Ref ; Your Application NIL Dear Sir, Your request for registration with Directorate General of Supplies & Disposals (DGS&D) has been accepted and your name has been included in the list of registered suppliers as per details given hereunder and in the attached Schedule. Registration No. Valid upto Category of registration Whether SSI Unit Name of the Firm : : : : : DGS&D/Regn/DEL/S-4946/13/06563 As indicated Workwise Manufacturer Yes INSTAPOWER LTD. Office Address / E-Mail ID / Telephone Nos: a) Registered Office S-19 Panchshila Park New Delhi -110017 01126015000 satyajit.vaish@instapower.com b) Corporate / Head office 457, Udyog Vihar, Phase V Gurgaon - 122001 01244124000 Solar Street Lighting System, White LED Based Limited Size / Grade / Type No of Light Source PV module Wattage (WP) Battery Rating (V& Ah) 1 40 12V & 40 Ah Solar Lantern System, White LED Based Limited Size / Grade / Type No of Light Source PV module Wattage (WP) Battery Rating (V& Ah) 1 5 12V & 7 Ah Yours faithfully, [ ] Deputy Director (Registration) For Director General of Supplies & Disposals Solar Home Lighting System, White LED Based Limited Size / Grade / Type MNRE Model No. No of Light Source PV module Wattage (WP) Battery Rating (V& Ah) I 1 6 12V & 7 Ah II 2 12 12V & 12 Ah (refer to actual registration document) Corporate Profile l 15 Product Range - Sampling of product portfolio 16 l Corporate Profile Projects: Few added Milestones 17 l Corporate Profile Exhibitions (National & International) Exporting to over 25 countries worldwide Afghanistan Nepal Argentina Nigeria Australia Oman Bangladesh Pakistan Denmark Saudi Arabia Egypt Spain Gabon Sri Lanka Ghana Sudan Greece Tanzania Kuwait UAE Libya UK Malaysia USA Mauritius Vietnam Kenya South America Corporate and R&D Registered Office Manufacturing Unit 457, Udyog Vihar, Phase - V, Gurgaon - 122 016, Haryana, India T : +91 124 412 4000 F : +91 124 412 4034 S - 19, Panch Shila Park, New Delhi - 110 017, India T : +91 11 2601 5000 F : +91 11 2601 4770 103, Raipur Industrial Area, Bhagwanpur,15.5 km. Roorkee-Dehradun Highway, Uttrakhand - 247 661, India www.instapower.com