PRESSURE ® SINGLE AND DUAL PRESSURE SWITCHES High Reliability, Repetitive Accuracy within ±1% Ø9/32 [7.14] MOUNTING HOLE TYP 2 PLACES 1/2 CONDUIT CONNECTION 5-7/8 [149.23] 3/4 [19.05] 1-5/16 [33.34] 3-1/16 [77.79] 4-11/16 [119.06] On the SERIES 1620 our old faithful switch design is still best where highest precision combined with diaphragm sealed leak proof construction and mounting simplicity are required. Model 1626 and 1627 differential pressure switches are identical in design and construction except that Model 1626 has a single electric switch and Model 1627 has dual electric switches. Model 1627 can therefore provide dual control when required. It can be set to open or close two independent electrical circuits, each preset for its own actuation pressure. Both units have diaphragm sealed motion take outs providing maximum protection against leakage. MODEL CHART Differential Pressure Switches Model 1626-1 1626-5 1626-10 1626-20 1627-1 1627-5 1627-10 1627-20 Operating Range in w.c. .15 to 1.5 .5 to 6.0 2.0 to 11 8.0 to 24 .15 to 1.5 .5 to 6.0 2.0 to 11 8.0 to 24 1-1/2 [38.10] 8-1/4 [209.55] 7-3/4 [196.85] 45° TYP R 4-5/16 [109.54] TYP 2 PLACES 1/8 FEMALE NPT 22.5° 1/8 FEMALE NPT LOW PRESSURE HIGH PRESSURE CONNECTION CONNECTION SPECIFICATIONS Service: Air and non-combustible, compatible gases. Wetted Materials: Consult factory. Temperature Limits: -30 to 130°F ( -34.4 to 54.4°C). Pressure Limits: Max. 50 in w.c. (12.44 kPa) continuous, 2 psig (13.79 kPa) surge. Switch Type: 1626 SPDT; 1627, (2) SPDT. Repeatability: ±1%. Electrical Rating: 15 A @ 120-480 VAC, 60 Hz. Resistive, 1/8 HP @ 125 VAC,1/4 HP @ 250 VAC, 60 Hz. FEATURES/BENEFITS • Single or dual action switches support consistent designs with similar models, but with the ability to match specific application needs • Sealed diaphragm provides leak-proof construction for high accuracy and precision control APPLICATIONS • Damper positioning 3 [76.20] 8-7/8 [225.43] Electrical Connections: 3 screw type, common, normally open and normally closed. Process Connections: 1/8˝ female NPT. Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations. Set Point Adjustment: Screw adjustment. Weight: Model 1626, 3 Ib, 9.8 oz (1.64 kg); Model 1627, 3 Ib, 11.8 oz (1.69 kg). Agency Approvals: CE. • Duct air control ACCESSORIES Model Description Price A-489 4˝ straight static pressure tip with flange $6.67 A-302F-A 303 SS static pressure tip with mounting flange; for 3/16˝ ID rubber 9.10 or plastic tubing; 4˝ insertion depth; includes mounting screws Approximate Deadband Adj. Diff. Between Min. Set Point Max. Set Point Set Points Price .10 .20 $243.00 .15 .35 243.00 .25 .65 243.00 .50 1.20 243.00 .10 .20 0.5 277.00 .15 .35 1.2 277.00 .25 .65 2.3 277.00 .50 1.20 5.0 277.00 OPTION To order add suffix: Description Price -MIL MIL environmental construction +$139.00n n Items are net priced and are not subject to any discount. LARGE DIAPHRAGM PRESSURE SWITCHES Visual Set Point Adjustment in 5 Standard Ranges, 0.05 in to 12 in w.c. Repetitive Accuracy within ±1% 1-1/4 [31.75] Ø9/32 [7.14] MOUNTING HOLE TYP 4 PLACES 1/2 [12.70] TYP 2 [50.80] TYP 3/4 [19.05] 3 [76.20] On the SERIES 1630 our highest precision conventional large diaphragm pressure switch provides maximum dependability. In addition, it incorporates a visible set point indicator for maximum convenience. UL and CSA listed, FM approved for general service. Electrical capability of 15 amps handles most small electrical loads. For use only with air or compatible gases. FEATURES/BENEFITS • Visible set point indicator simplifies operation and trouble shooting • Large diaphragm provides low range accuracy providing precise control • Current loads of up to 15 amps supports most small electrical loads supporting a broader range of HVAC and Process applications without the need for additional relays and components APPLICATIONS • Damper positioning • Duct air control MODEL CHART Model 1638-0 1638-1 1638-2 1638-5 1638-10 Operating Range in w.c. 0.05 to 0.25 0.20 to 1.0 1.0 to 3.0 2.0 to 6.0 3.0 to 12 • Air conditioning • Industrial service Approximate Deadband Min. Set Point Max. Set Point Price 0.04 0.05 $267.00 0.04 0.06 267.00 0.06 0.08 267.00 0.07 0.25 267.00 0.11 0.30 267.00 3-39/64 [91.68] 3-3/32 [78.58] 4 3 [76.20] [101.60] TYP 5-7/8 [149.23] 6-1/2 [165.10] Ø7/8 [22.23] CONDUIT CONNECTION 1/8 FEMALE NPT HIGH PRESSURE CONNECTION SCREW TYPE ELECTRICAL TERMINAL TYPE 3 PLACES 2-1/4 [57.15] CLEARANCE FOR COVER REMOVAL SPECIFICATIONS Service: Air and non-combustible, compatible gases. Wetted Materials: Consult factory. Temperature Limits: -30 to 110°F (-34.4 to 43.3°C). Pressure Limits: 10 psig (68.95 kPa) continuous, 25 psig (172.4 kPa) surge. Switch Type: SPDT. Repeatability: ±1%. Electrical Rating: 15 A @ 120-480 VAC, 60 Hz. Resistive 1/8 HP @ 125 VAC, 1/4 HP @ 250 VAC, 60 Hz. Ø7-3/4 [196.85] R 4-5/16 [109.54] TYP 2 PLACES 22.5° 1/8 FEMALE NPT LOW PRESSURE CONNECTION Electrical Connections: 3 screw type, common, normally open and normally closed. Process Connections: 1/8˝ female NPT. Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations. Set Point Adjustment: Screw type with enclosed scale. Weight: 4 Ib 14 oz (2.21 kg). Agency Approvals: CSA, FM, UL. ACCESSORIES Model Description Price A-489 4˝ straight static pressure tip with flange $6.67 A-302F-A 303 SS static pressure tip with mounting flange; for 3/16˝ ID rubber 9.10 or plastic tubing; 4˝ insertion depth; includes mounting screws OPTION MIL Environmental Construction Unlisted Model 1635 can be furnished with a special sealed snap switch for protection against high humidity, fungus and/or military applications. Similar to Model 1638 except deadband is slightly greater and some lower setpoints may not be available. Note: To order, specify Model 1635-(Range No.)-MIL and required set point and +$139.00n. n Items are net priced and are not subject to any discount. Process Tubing Options: See page 443 (Gage Tubing Accessories) 38 DWYER INSTRUMENTS, INC. | www.dwyer-inst.com