8 5 6 7 102.2 4.03 MOUNTING HOLE PATTERN D 3 4 Copyright 2008 THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF ANDERSON POWER PRODUCTS. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF ANDERSON POWER PRODUCTS IS PROHIBITED. 2 1 ANDERSON POWER PRODUCTS RESERVES THE RIGHT TO ALTER PRODUCT TYPES, THEIR TECHNICAL DATA, DIMENSION, STYLE AND ACCESSORIES WITHOUT PRIOR NOTIFICATION. D 86.2 3.39 4.5 .18(2) 85.8 3.38 45° 25.2 .99 53 2.09 47.8 1.88 C C 43.2 1.70 51.1 2.01 39.9 1.57 PRE-MATE GROUND WHITE WHITE PRE-MATE GROUND PRE-MATE GROUND 5.3 1 .21 TYP 34.3 1.35 B 1 8.5 .34 TYP BLACK RED RED SEE NOTE 3 BLACK NOTES: 1. ASSEMBLY IS PROVIDED COMPLETE, AS SHOWN 2. MATERIALS- SEE DATA SHEET, ALL COMPONETS ARE RoHS COMPLIANT 3. 2X2 POWERPOLE BLOCK AT THE CENTER OF THE T ARE ARRANGED UPSIDE DOWN FROM THE SIDE BLOCKS. MATING POWERPOLE PAK PLUG A ASSEMBLIES MUST BE CONFIGURED CORRECTLY IN ORDER TO MATE. 4. RECOMMENDED #8 x 1/2 - 3/4 or M4 x 13-20mm SCREWS FOR MOUNTING CMS REV. DESCRIPTION OF CHANGES 8 7 APPROVED 6 5 DRAWN TOLERANCES: DECIMALS (INCH) DECIMALS (MM) ANGLES .XX .02 .X .5 SURFACE FINISH: 128 [3.2] 64 [1.6] MACHINED MOLDED MATERIAL: SEE NOTES BLACK APPROVALS CMS 5/5/08 CHECKED DJD 5/7/08 CHB 5/12/08 UFN 5/6/08 2 QC APP ENG APP ANDERSON POWER PRODUCTS TITLE T-PAK CAT. NO. 20-01 R-WH-BLK- GND MFG APP DAM 5/7/08 NONE SIZE DWG NO. A/A4 114776S1 CADFILE -CAD GENERATED DRAWING- SCALE DO NOT MANUALLY UPDATE NONE DO NOT SCALE 10/06/08 DATE RED UNLESS OTHERWISE STATED FINISH: ECRN 14332: ADD DIMENSIONS FOR MOUNTING B 18.3 .72 DIMENSIONS INCH[MM] ARE IN: 1 WHITE 3rd ANGLE PROJECTION 4 3 2 02777 A REV. SHEET 1 1 1 OF 1