Industrial Training Institute, Narnaul
Mohindergarh Road
E-Tender Notice
The department intends to purchase Tools &Machinary. The detail specifications,
terms
&
conditions
of
the
tender
can
be
seen
on
website
https://haryanaeprocurement.gov.in. The last date of receipt of online e-tender is
14.12.2015,upto 16.00 Hrs.
-SdPrincipal
Industrial Training Institute, Narnaul
DEATIL NOTICE INVITING TENDER
e-Tender is invited for purchase of below mentioned items in single stage two
cover system i.e. Request for Pre-Qualification/Technical Bid (online Bid under PQQ/
Technical Envelope) and Request for Financial Bid (comprising of price bid Proposal under
online available Commercial Envelope):-
Sr. Name of Items EMD to be Tender Start Date & Expiry Date Expiry Date
No
deposited Document Time of Bid & Time of Bid & Time of Bid
by Bidder
Fee &
Preparation
of EMD
Preparation
eService & Submission Submission & Submission
Fee (Rs.)
1. Purchase Tools &
Machinary
50000/-
1000/- +
1000/=2000 /-
01.12.2015
from 09:00
Hrs
14.12.2015
14.12.2015
upto 11:00 Hrs upto 16:00 Hrs
Under this process, the Pre-qualification/ Technical online bid Application as well as online
Price Bid shall be invited at single stage under two covers i.e. PQQ/Technical & Commercial
Envelope. Eligibility and qualification of the Applicant will be first examined based on the
details submitted online under first cover (PQQ or Technical) with respect to eligibility and
qualification criteria prescribed in this Tender document. The Price Bid under the second
cover shall be opened for only those Applicants whose PQQ/ Technical Applications are
responsive to eligibility and qualifications requirements as per Tender document.
1. The payment for Tender Document Fee and e-Service Fee shall be made by eligible
bidders offline/online directly through Debit Cards & Internet Banking Accounts and
the payment for EMD can be made online directly through RTGS/NEFT or OTC Please
refer to ‘Online Payment Guideline’ available at the Single e-Procurement portal of
GoH (Govt. of Haryana) and also mentioned under the TenderDocument.
2. Intending bidders will be mandatorily required to online sign-up (create user account) on
the website https://haryanaeprocurement.gov.in to be eligible to participate in the eTender.He/She will be required to make online payment of Rs. 50000/- towards EMD
fee in due course of time i.e. between 01.12.2015 from 09:00 Hrsupto 14.12.2015. The
intended bidder fails to pay EMD fee under the stipulated time frame shall not be
allow to submit his/her bids for the respective event/Tenders.
3. The interested bidders must remit the funds at least T+1 working day (Transaction + One
working Day) in advance i.e. on or before 14.12.2015; and make payment via
RTGS/NEFT or OTC to the beneficiary account number specified under the online
generated challan. The intended bidder/Agency thereafter will be able to successfully
verify their payment online, and submit their bids on or before the expiry date & time
of the respective events/Tenders at https://haryanaeprocurement.gov.in.
The interested bidders shall have to pay mandatorily e-Service fee (under document fee
– Non refundable) of Rs.1000/- (Rupee One Thousand Only) online by using the service
of secure electronic gateway. The secure electronic payments gateway is an online
interface between bidders & online payment authorization networks.
The Payment for document fee/ e-Service fee can be made by eligible bidders online
directly through Debit Cards & Internet Banking.
The interested bidders must remit the funds at least T+1 working day (Transaction + One
working Day) in advance before the expiry date & time of the respective events. And
make payment via RTGS/NEFT to the beneficiary account number specified under the
online generated challan.
The Bidders can submit their tender documents (Online) as per the dates mentioned in
the key dates:Key Dates
Sr. No.
Department Stage
1
Bidder's Stage
Start date and
Expiry date and
time
time
Tender Document
01.12.2015
14.12.2015 upto
Download and Bid
From 09:00
16:00 Hrs
Preparation/Submission
2
Technical Bid Opening
3
Financial Bid Opening
Hrs
15.12.2015 11:00Hrs
15.12.2015 16.00 Hrs
Important Note:
1) The Applicants/bidders have to complete ‘Application/Bid Preparation & Submission’
stage on scheduled time as mentioned above. If any Applicant/bidder failed to
complete his/her aforesaid stage in the stipulated online time schedule for this stage,
his/her Application/bid status will be considered as ‘Applications/bids not submitted’.
2) Applicant/Bidder must confirm & check his/her Application/bid status after
completion of his/her all activities for e-bidding.
3) Applicant/Bidder
can rework on his/her bids even after
completion of
‘Application/Bid Preparation & submission stage’ (Application/Bidder Stage), subject
to the condition that the rework must take place during the stipulated time frame of
the Applicant/Bidder Stage.
Instructions to bidder on Electronic Tendering System
These conditions will over-rule the conditions stated in the tender documents, wherever relevant and
applicable.
Registration of bidders on e-Procurement Portal:-
1.
All the bidders intending to participate in the tenders process online are required to get registered on the
centralized e - Procurement Portal i.e. https://haryanaeprocurement.gov.in. Please visit the website for
more details.
Obtaining a Digital Certificate:
2.
2.1
The Bids submitted online should be encrypted and signed electronically with a Digital
Certificate to establish the identity of the bidder bidding online. These Digital Certificates are issued by an
Approved Certifying Authority, by the Controller of Certifying Authorities, Government of India.
2.2
A Digital Certificate is issued upon receipt of mandatory identity (i.e. Applicant’s PAN
Card) and Address proofs and verification form duly attested by the Bank Manager / Post Master /
Gazetted Officer. Only upon the receipt of the required documents, a digital certificate can be issued. For
more details please visit the website – https://haryanaeprocurement.gov.in.
2.3
The bidders may obtain Class-II or III digital signature certificate from any Certifying
Authority or Sub-certifying Authority authorized by the Controller of Certifying Authorities or may obtain
information and application format and documents required for the issue of digital certificate from.
2.4
The bidder must ensure that he/she comply by the online available important guidelines at
the portal https://haryanaeprocurement.gov.in for Digital Signature Certificate (DSC) including the eToken carrying DSCs.
M/s Nextenders (India) Pvt. Ltd.
O/o. DS&D Haryana,
SCO – 09, IInd Floor,
Sector – 16,
Panchkula – 134108
E - mail: Chandigarh@nextenders.com
Help Desk: 0172 – 2582008-09, 2618292 and 1800-180-2097 (Toll Free Number)
2.4
Bid for a particular tender must be submitted online using the digital certificate
(Encryption & Signing), which is used to encrypt and sign the data during the stage of bid preparation. In
case, during the process of a particular tender, the user loses his digital certificate (due to virus attack,
hardware problem, operating system or any other problem) he will not be able to submit the bid online.
Hence, the users are advised to keep a backup of the certificate and also keep the copies at safe place
under proper security (for its use in case of emergencies).
2.5
In case of online tendering, if the digital certificate issued to the authorized user of a firm
is used for signing and submitting a bid, it will be considered equivalent to a no-objection
certificate/power of attorney /lawful authorization to that User. The firm has to authorize a specific
individual through an authorization certificate signed by all partners to use the digital certificate as per
Indian Information Technology Act 2000. Unless the certificates are revoked, it will be assumed to
represent adequate authority of the user to bid on behalf of the firm in the department tenders as per
Information Technology Act 2000. The digital signature of this authorized user will be binding on the firm.
2.6
In case of any change in the authorization, it shall be the responsibility of management /
partners of the firm to inform the certifying authority about the change and to obtain the digital
signatures of the new person / user on behalf of the firm / company. The procedure for application of a
digital certificate however will remain the same for the new user.
2.7
The same procedure holds true for the authorized users in a private/Public limited company. In
this case, the authorization certificate will have to be signed by the directors of the company.
3
Opening of an Electronic Payment Account:
For purchasing the tender documents online, bidders are required to pay the tender documents
fees online using the electronic payments gateway service shall be integrated with the system very soon
till then it will be submitted manually. For online payments guidelines, please refer to the Home page of
the e-tendering Portal https://haryanaeprocurement.gov.in.
4
Pre-requisites for online bidding:
In order to operate on the electronic tender management system, a user’s machine is required to
be set up. A help file on system setup/Pre-requisite can be obtained from Nextenders (India) Pvt. Ltd. or
downloaded from the home page of the website - https://haryanaeprocurement.gov.in.. The link for
downloading required java applet & DC setup are also available on the Home page of the e-tendering
Portal.
5
Online Viewing of Detailed Notice Inviting Tenders:
The bidders can view the detailed N.I.T and the time schedule (Key Dates) for all the tenders
floated through the single portal eProcurement system on the Home Page at
https://haryanaeprocurement.gov.in.
6
Download of Tender Documents:
The tender documents can be downloaded free of cost from the eProcurement portal
https://haryanaeprocurement.gov.in
7
Key Dates:
The bidders are strictly advised to follow dates and times as indicated in the online Notice Inviting
Tenders. The date and time shall be binding on all bidders. All online activities are time tracked and the
system enforces time locks that ensure that no activity or transaction can take place outside the start and
end dates and the time of the stage as defined in the online Notice Inviting Tenders.
8 Online Payment of Tender Document Fee, eService fee & EMD fees &Bid Preparation & Submission
(PQQ/ Technical & Commercial/Price Bid):
8.1 Online Payment of Tender Document Fee + e-Service fee:
The online payment for Tender document fee, eService Fee & EMD can be done using the
secure electronic payment gateway. The Payment for Tender Document Fee and eService Fee shall be
made by bidders/ Vendors online directly through Debit Cards & Internet Banking Accounts and the
Payment for EMD shall be made online directly through RTGS / NEFT & OTC.
The secure electronic payments gateway is an online interface between contractors and Debit card /
online payment authorization networks.
8.2
PREPARATION & SUBMISSION Of online APPLICATIONS/BIDS:
(i)
Detailed Tender documents may be downloaded from e-procurement website
(https://haryanaeprocurement.gov.in) from 01.12.2015 (09:00 Hrs.) to 14.12.2015 upto 16:00
Hrsand tender mandatorily be submitted online following the instruction appearing on the
screen.
(ii) Scan copy of Documents to be submitted/uploaded for Prequalification or Technical
bid under online PQQ/ Technical Envelope: The required documents (refer to DNIT) shall
be prepared and scanned in different file formats (in PDF /JPEG/MS WORD format such
that file size is not exceed more than 10 MB) and uploaded during the on-line submission of
PQQ or Technical Envelope.
A. Only Electronic Form (Refer Tender document).
FINANCIAL or Price Bid PROPOSAL shall be submitted mandatorily online under
Commercial Envelope and original not to be submitted manually)
NOTE:(A)
Bidders participating in online tenders shall check the validity of his/her Digital Signature
Certificate before participating in the online Tenders at the portal https://haryanaeprocurement.gov.in.
(B)
For help manual please refer to the ‘Home Page’ of the e-Procurement website at
https://haryanaeprocurement.gov.in, and click on the available link ‘How to...?’ to download the file.
In the first instance, the online payment details of tender document fee+e-Service and EMD &
PQQ/Technical Envelope shall be opened. Henceforth financial bid quoted against each of the item by
the shortlisted bidder/ Agency wherever required shall be opened online in the presence of such
bidders/ Agency who either themselves or through their representatives choose to be present.
The bidder can submit online their bids as per the dates mentioned in the schedule/Key Dates above.
The bids shall be submitted online in two separate envelopes:
• Envelope 1: Technical Bid
The bidders shall upload the required eligibility & technical documents online in
the Technical Bid.
• Envelope 2: Commercial Bid
The bidders shall quote the prices in price bid format under Commercial Bid.
Principal
Industrial Training Institute, Narnaul
(Online Payment Guideline)
Guideline for Online Payments at e-Procurement Portal of Government
of Haryana
Post registration, bidder shall proceed for bidding by using both his digital
certificates (one each for encryption and signing) & Password. Bidder shall proceed to select
the event/Tenders he is interested in. On the respective Department’s page in the eProcurement portal, the Bidder would have following options to make payment for tender
document fee & EMD:
A. Debit Card
B. Net Banking
C. RTGS/NEFT
Operative Procedures for Bidder Payments
A) Debit Card
The procedure for paying through Debit Card will be as follows.
(i) Bidder selects Debit Card option in e-Procurement portal.
(ii) The e-Procurement portal displays the amount and the card charges to be paid by bidder.
The portal also displays the total amount to be paid by the bidder.
(iii) Bidder clicks on “Continue” button
(iv) The e-Procurement portal takes the bidder to Debit Card payment gateway screen.
(v) Bidder enters card credentials and confirms payment
(vi) The gateway verifies the credentials and confirms with “successful” or “failure” message,
which is confirmed back to e-Procurement portal.
(vii) The page is automatically routed back to e-Procurement portal
(viii) The status of the payment is displayed as “successful” in e-Procurement portal. The eProcurement portal also generates a receipt for all successful transactions. The bidder can
take a print out of the same,
(ix) The e-Procurement portal allows Bidder to process another payment attempt in case
payments are not successful for previous attempt.
B) Net Banking
The procedure for paying through Net Banking will be as follows.
(i) Bidder selects Net Banking option in e-Procurement portal.
(ii) The e-Procurement portal displays the amount to be paid by bidder.
(iii) Bidder clicks on “Continue” button
(iv) The e-Procurement portal takes the bidder to Net Banking payment gateway screen
displaying list of Banks
(v) Bidder chooses his / her Bank
(vi) The Net Banking gateway redirects Bidder to the Net Banking page of the selected Bank
(vii) Bidder enters his account credentials and confirms payment
(viii) The Bank verifies the credentials and confirms with “successful” or “failure” message to
the Net Banking gateway which is confirmed back to e-Procurement portal.
(ix) The page is automatically routed back to e-Procurement portal
(x) The status of the payment is displayed as “successful” in e-Procurement portal.
The e-Procurement portal also generates a receipt for all successful transactions. The bidder
can take a print out of the same.
(xi) The e-Procurement portal allows Bidder to process another payment attempt in case
payments are not successful for previous attempt.
C) RTGS/ NEFT/OTC
The bidder shall have the option to make the EMD payment via RTGS/ NEFT/OTC.
Using this module, bidder would be able to pay from their existing Bank account through
RTGS/NEFT. This would offer a wide reach for more than 90,000 bank branches and would
enable the bidder to make the payment from almost any bank branch across India.
I. Bidder shall log into the client e-procurement portal using user id and password as per
existing process and selects the RTGS/NEFT payment option.
ii. Upon doing so, the e-procurement portal shall generate a pre-filled challan. The challan
will have all the details that is required by the bidder to make RTGS-NEFT payment.
iii. Each challan shall therefore include the following details that will be pre-populated:
• Beneficiary account no: (unique alphanumeric code for e-tendering)
• Beneficiary IFSC Code:
• Amount:
• Beneficiary bank branch:
• Beneficiary name:
iv. The Bidder shall be required to take a print of this challan and make the RTGS/NEFT on
the basis of the details printed on the challan.
v. The bidder would remit the funds at least T + 1 day (Transaction + One day) in advance to
the last day and make the payment via RTGS / NEFT to the beneficiary account number as
mentioned in the challan.
vi. Post making the payment, the bidder would login to the e-Tendering portal and go to the
payment page. On clicking the RTGS / NEFT mode of payment, there would be a link for real
time validation. On clicking the same, system would do auto validation of the payment
made.
List of Net banking banks
1. Allahabad Bank
2. Axis Bank
3. Bank of Baroda
4. Canara Bank
5. City Union Bank
6. Central Bank of India
7. Corporation Bank
8. HDFC Bank
9. ICICI Bank
10. Punjab National Bank
11. Oriental Bank of Commerce
12. State Bank of India
13. State Bank Of Patiala
14. Vijaya Bank
15. Yes Bank
For making payment through Demand Draft against the online Challan generated for OTC:
The intended bidders are required to draw demand draft in favourof below furnished details.
Sr No.
1
Account title
GOH E PROC EMD ESCROW AC
DSND HITD
Terms and conditions for e-tendering
1.
Sl.
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
The Tools & Machinery should as per given below:
Name of the items
File Flat rough double cut 200mm (JK)
File, half round, fine double cut length 150mm
(JK)
File, round, fine double cut length 150mm (JK)
File flat, fine double cut length 150mm (JK)
File square, fine double cut length 150mm (JK)
File triangular, fine double cut length 150mm
(JK)
Scriber length 150mm
Centre punch length 100mm
Try square 1500mm
Divider spring joint length 150mm
Caliper spring joint in side length 150mm
Caliper, odd leg, spring joint length 150mm
Hammer ball pain 220gms
Cold Chisel flat and cross cut length 150mm
Engineers rule 300mm long
Tape measuring 10m graduation in mm
Pliers combination insulated length 200mm
(Taparia)
Pliers long nose 200mm (Taparia)
Pliers flat nose 150mm (Taparia)
Line tester 500 v heavy duty (Taparia)
Tweezers 10cm
Surface plate 45x45 cms
Oil can 500 ml
Surface Gauge universal 150mm
Bench vice 300mm jaw
Hack saw tubular metal frame adjustable
300mm
Snip sheet metal straight nose 200mm
Snip sheet metal curved nose 200mm
Anvil 100x200mm
Stakes (different types) 100mm
Tin smith 400mm
Wooden mallet /Nylon mallet 500gm good finish
Round Punch 3mm,4mm,6mm
Grover set 4mm forming
Electrical drill portable drill with chuck and key
capacity 6.4mm
Tape measuring graduation in mm 2m
Rate per
Item
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
Screw driver, plastic handle 6mm TIP length
100mm to 150mm (Taparia)
Screw driver, plastic handle Flat tip 10mm TIP
length 200mm & 250mm
Philips screw driver complete set in leather case
Screw driver, plastic handle Flat tip handle 3mm
TIP length 100mm & 150mm insulated
Soldering iron exchangeable copper tip 65 watts
Knife folded stainless steel 150mm
Tong tester (clamp on multi meter) 0-10-30
amps 0-500 v
Voltmeter, AC/DC portable precision grade
Digital Panel board type 0 to 500 volt
Ammeter, AC/DC portable precision grade
Digital Panel board type 0 to 30 amp
Megger 1000v
Wattmeter multi-range upto 1 KW
Multimeter digital type
Tenon saw 250mm
Firmer chisel 6,12,25mm
Rawal plug tool 6mm
K.W. meter 0-1 KW
Fire extinguisher ABC dry powder type 2 kg
capacity
Fire buckets 10 litre
D.E spanner 6-32 mm
Ring spanner 6-32 mm
Diagonal cutter 15 cm
Service Oscillator
C.R.O Single beam 5 MHZ
C.R.O Dual trace/Double beam 60 MHZ
A.F.O Oscillators
Tong, close mouth and pick up
Welding table for gas/Arc 1200x760
Flaring tool set, single type for tube 4.7mm to
16mm O.D
Swaging tool, punch type set of size for tube
4.7mm to 16mm O.D
Swaging tool, screw type with adaptor set of
size for tube 4.7mm to 16mm O.D
Bending spring external type, for copper tube
3mm to 16mm DIA
Pipe cutter miniature for copper tube 3mm to
16mm DIA
Pinch of tool, for copper tube 6mm to 18mm
DIA
Ratchet spanner of 6.4sq.mm reversible
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
Capillary plug gauge
Piercing pliers & reversing valve with access
fitting 6-18mm
Spanner double ended 4.7mm to 16mm
Ring spanner off set 4.7mm to 16mm
Wrench adjustable length 150mm
Wrench adjustable length 200mm
Wrench adjustable length 250mm
Valve key handle (Treated as consumable) 4.7mm & 6.4mm sq.
Pressure gauge Digital type diameter 63mm
with recalibration set
Compound gauge, Digital type diameter 63mm,
with recalibration set screw, scale vacuum
76mm. Pressure 15Kg/sq.cm
Service man thermometer in metal case -30 C
to +30 C
Scissor, gasket cutting stainless steel length
25mm
L-Allen key set size 1.5mm to 6.4mm
T-Allen key set size 5/32" to 1/8"
Pipe cutter with built in reamer and space
cutter, for copper tube 3mm to 32mm
Pipe/Tube bender lever type 3-16mm
Spanner double ended 19mm to 31.8mm
Pipe wrench size 50mm to 150mm
Gas leak detector for halogen gas
Sling psychro meter mounted on aluminum
back scale 50 C to +50 C
Lapping plate 250mmx200mm
Hammer ball peen 450gms
Puller 3 legged with flexible arm 300mm
Hand blower portable complete 1/10 HP
Spirit level precision metallic 200mm
Stop watch
Tap set with matching drills 3mm to 16mm
Tap set with matching drills 1/4" to 5/8"
Refrigerant cylinder 2.5 Kg
Vernier caliper length 250mm
Micrometer outside measurement 0 to 25mm
Heating kit with infrared bulb 200 w capacity
Plumbing hammer weight 200gm
Multi meter analogue type
Tachometer digital, multi range 0 rmp to 3000
rmp Portable small size in leather case
Micron vacuum gauge capable of reading up to
20 microns
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
Sensor thermometer (Digital) -50 degree
Celsius to 150 degree 23 Celsius
Fin straightened/fin comd. With strong steel wire
based combing on wood
Filler gauge 0.05mm - 1mm
Wire gauge metric and with worth Steel plate
embossing converse of British & Metric
Dial thermometer remote control, armored
capillary dial 75mm - 50C to +50 C
Anemometer Digital type
Compressors testers for small hermetic
compressors Fixed with electrical Input/Output
indicating facilities
Engineers square 150mm with 5 tolerance
Digital thermometer (Treated as consumable)
Graduated disc analogy type
Temperature & Humidity recorder Capacity to
record 24 hrs record
Instrumentation screw driver set 100mm
Digital weighinh machine 100kg
Cylinder 134 a 5 kg
Split phase induction motor 1/4 hp, 230 v
Capacitor start induction motor 1/2 HP, 230 v
AC 3 Phase motor, 400/50 HZ 2 HP
Star delta starter 2 HP
Auto Transformer starter 3 HP
D.O.L Starter 2HP
Portable - LPC brazing kit 2 kg. LPC cylinder,
torches, houses, stand make
Oxy-acetylene welding set complete cylinders,
regulators welding torches with difference
nozzles
128
Refrigerator 165L carrying with HFC-134a, &
HC
129
Frost free refrigerator 200L carrying with HC
blend
Three/Four door refrigerator 300L carrying with
HC R-600a
Bench Drilling machine 20mm,200-3000rpm
Grinding Machine 200mm,3000rpm, Double
ended 1/2 hp
130
131
132
133
Evacuating and refrigerant charging station,
consist of
(a) Rotary two stage vaccum pump and motor
(with gas ballast and anti such back)
(b) Manifold with gauges and valves and
capable of pulling vaccum up to 50 microns of
Hg and with provision of connecting to a
microns level vacuum gauge
(b) Graduated charging cylinder with provision
for temperature correction and all necessary
isolating valves
(II) Evacuating and charging station as above
but fitted weighing scale
(CAp. 2 kg. In lieu of (b) above and with
charging hydrocarbons)
134
Two stage rotary vacuum capacity app. 60 provision
135
136
137
138
Shell and tube type condenser 5 Ton
Rotary hermetic compressor 2Ton with Motor
Screw compressor 5Ton with Motor
Bottle cooler visible 200L carrying with HFC134a & reciprocating compressor
Deep freezer 200L carrying with HFC-134a &
reciprocating
Water cooler storage type 200L carrying with
HFC-134a & reciprocating
Ice candy plant 2 ton with capacity to make 32
ice candy at a time with Forma tray, stainless
steel tank on trolley
139
140
141
142
Air-conditioning, direct and indirect system
Complete with all controls including humidity
control capacity 15000Kcal/hr
143
Package A/C 5 ton capacity, Air cooled type
with open type compressor reciprocating type
144
145
146
147
Car A.C components (full kit)
(a) Wobble plate compressor with mounting
brackets.
(b) Serpentine Evaporator
( c ) Parallel Flow Condenser
(d) Hoses, tubes, Receiver, Ex. Valve
(e) Electrical components & wiring Harness
CAR AC tutorial modelpump 10rmp capable of
evacuating to 50 microns of Hg and fitted with
gas ballast, anti such back valve and single
phase motor
Air compressor two stage for oil-less dry air,
with rush proof tank assembly, heater and
controls max pr. 10kgs/sq.m Capacity 45 ltr.
Motor 1 hp
Reciprocating compressor provision of capacity
control etc. for demonstration. Capacity 2 ton
open type.
148
Dry N2 in cylinder 2 stage regular or
commercial N2 in cylinder with driver unit and 2
stage regular 7 meter cube
149
Window A.C. 1 Ton with R-22 or HFC Blend
reciprocating compressor
Split A.C. 1.5 Ton with R134a or R-22
reciprocating compressor
Duct able split A.C. 1.5 ton 1.5 Ton with R134a
or R-22 reciprocating compressor
Recovery unit with cylinders CFC & 134 a
Cassette Air conditioner 4500 kcal/hr
De scaling pump set with stainless steel
impeller and housing complete with motor 1/2
hpabd accessories
150
151
152
153
154
155
156
157
Fan coil unit with water valves (2 & 3 way)
Shell and tube , DX chillers (small) 5 Ton with
Cu tubing only
Circulating water pump (small) 0.5 H.P with
stainless steel tank capacity 20 liters within
let/outlet
158
Box drawing instrument containing one 15 cm
compass pin point , pin point and lengthening
bar, one pair spring bows, rotating compass
with interchangeable ink and pencil points,
drawing pens with plain point and cross point,
screw driver And box of leads
159
Protector celluloid 15 cm semi- circular
160
Scale card board metric set of eight A to H in a
box 1:1, 1:2, 1:2:5, 1:5, 1:10 ,1:20, 1:50, 1:100,
1:200, 1:500, 1:1000,
1:2000,1:1250,1:6000,1:38,1:3,1:66,2/3
161
Scale plotting box wood 6 metric scale 30 cm
long with offset scales
Set square transparent 20cm, 2mm thick with
beveled edges 45 degree
Set square celluloid 25cm, 2mm thick with
beveled edges 60 degree
T-Square 1250mm/mini drafter/parallel bar
Template-Architects & Builders
Geometrical model(wooden) as per given
below:
(i) cube 08 mm side
(ii) Rectangular parallel pip[ed 8 cmx15cm
(iii) sphere 8cm diameter
(iv) Light circular core 8 cm dia base and 15 cm
vertical height
(V) Square pyramid 8 cm side and 15 cm
vertical height
(vi) Cylinder 8 cm dia 15 cm long
(vII) Prism triangular 8 cm sides triangle and 15
cm length
(viii) Prism hexagonal 8 cm sides hexagon and
15 cm Length
162
163
164
165
166
167
168
169
170
171
172
173
174
Template- Circle, Ellipse, Furniture
Radius curves metric 3 mm to 15 mm
French curve – transparent plastic set of 12
Flexible curve 80 cm long
Brass parallel rules in a case
Calculator scientific (Non-programmable)
Steel tape 30 meters long
Digital Theodolite latest model with all
accessories (Features:- Based on laser
technology, Two large LCD panel with easy to
read, Automatically compensates tilt in two
direction and compensates vertical angles. High
integrated electronic board and IC elements)
175
Instrument for total station with latest model with
all accessories (graphic LCD display on both
side. Multy function keyboard on both side. Able
to interchange data between GPS and total
station without any data conversion. Minimum 8
hours rechargeable Li-ion battery. Poles and
prism 2nos each)
176
Hand help GPS(latest model) with standard
specification
Auto level with all accessories
177
178
179
180
181
182
3. WORKSTATION/NODES – i700 (i7)
PROCESSOR or Higher 8 GB RAM or Higher 1
Terabyte HDD or Higher 22" TFT Monitor101
With wireless LAN Card DVD OR BLU-RAY
WRITER KEYBORD/INTERNET USB Optical
Mouse, USB Keyboard with latest license of
OS and Antivirus - Professional/Ultimate
Edition
Laptop: With i770 Intel Processor, 8 GB RAM,
1 TB HDD, WI-FI withlicense Operating or
Higher System and Antivirus - 01 Nos.
Plotter A1 size
Printer (Desk jet / laser jet) with scanner
(multipurpose)
WORKSTATION FOR MULTIMEDIA - 01 Nos.
i700 (i7) PROCESSOR or Higher 8 GB RAM or
Higher 1 Terabyte HDD or Higher With wireless
LAN Card 22" TFT Monitor101 DVD OR BLURAY WRITER KEYBORD/INTERNET USB
Optical Mouse, USB Keyboard with latest
license of OS with Antivirus Professional/Ultimate Edition
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
Broad band connection
UPS 5KV
Computer Table
Computer Chair
Furniture for server, printer plotter
White board (6’x4’)
DLP Projector (2000 lumens or higher)
First Aid box
Screen for projector (motorized)
Fire Extinguisher
Wall clock
Documents camera/ visualiser
Small board/ inter Active board
Steel cupboard 180x90x45 cm
Steel cupboard 120x60x45 cm
Drawing table with board 1250x900xmm &
draughtsman stools
199
200
201
Steel Tape, 15 m length
Screw Driver, 100 mm (Taparia)
202
203
204
205
206
Electrician Connector, screw driver insulated handle
thin stem, 100 mm(Taparia)
Heavy Duty Screw Driver , 200 mm(Taparia)
Electrician Screw Driver thin stem insulated handle,
250 mm(Taparia)
Punch Centre , 150 mm X 9 mm(Taparia)
Knife Double Bladed Electrician
Neon Tester(Taparia)
207
208
Steel Rule 300 mm
Hammer, cross peen with handle(Taparia)weight250g
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
Hammer, ball peen With handle weight-250g
Gimlet 6 mm.
Bradawl
Scriber (Knurled centre position )
Pincer 150 mm
C- Clamp 200 mm, 150 mm and 100 mm(Taparia)
Spanner Adjustable 150 mm,300mm
Melting Pot
Ladel
Chisel Cold firmer 25 mm X 200 mm(Taparia)
Allen Key(Taparia)2-14
Rawl plug tool and bit
Pully Puller
Bearing Puller
Pipe vice
Scissors blade 150 mm
Crimping Tool(Taparia)
Wire stripper 20 cm(Taparia)
Chisel Cold flat 12 mm
Mallet hard wood 0.50 kg
Hammer Extractor type 0.40 kg
Hacksaw frame 200 mm 300 mm adjustable
Outside and Inside Divider Calliper
Pliers round nose 100 mm(Taparia)
Tweezers 100 mm
Snip Straight and Bent 150 mm
D.E. metric Spanner(Taparia)
Drill hand brace(Taparia)
Drill S.S. Twist block 2 mm, 5 mm 6 mm set of 3
Plane, smoothing cutters 50 mm
File flat 200 mm 2nd cut(JK)
240
File half round 200 mm 2nd cut(JK)
241
File round 200 mm 2nd cut(JK)
242
243
244
245
246
247
248
249
250
251
File flat 150 mm rough(JK)
File flat 250 mm bastard(JK)
File flat 250 mm smooth(JK)
File Rasp, half round 200 mm bastard(JK)
Soldering Iron 25 watt, 65 watt, 125 watt
Copper bit soldering iron 0.25 kg.
Table Vice 100 mm jaw
Pipe Cutter to cut pipes upto 5 cm. dia
Pipe Cutter to cut pipes above 5 cm dia
Ohm Meter; Series Type & Shunt Type
252
Multi Meter (analog) 0 to 1000 M Ohms, 2.5 to
500 V
253
254
255
256
257
Digital Multi Meter
D.C. Milli ammeter 0 -500m A
Ammeter MC 0-5 A, 0- 25 A
A.C. Ammeter M.I. 0-5A, 0-25 A
A.C. Energy Meter, Single phase 5 amp. Three Phase
15 amp
258
259
260
261
Frequency Meter
Laboratory Type Induction Coil
DC Power Supply 0-30V, 2 amp
Rheostat 0 -1 Ohm, 5 Amp
0 -10 Ohm, 5 Amp
Ohm, 1 Amp
1 Amp
262
263
Battery Charger
264
265
Load Bank 5 KW( Lamp / heater Type)
266
267
268
0- 25
0- 300 Ohm,
Fire Extinguisher CO , 2 KG
2
Brake Test arrangement with two spring balance 0
to 25 kg rating
3- point D.C. Starter
4- point D.C. Starter
Three phase transformer, shell type oil cooled with
all mounting 3 KVA , 415/240 V, 50 Hz , (Delta/Star)
269
270
271
272
273
274
275
276
Oscilloscope Dual Trace, 30 MHZ
Function Generator
Discrete Component Trainer
Linear I.C. Trainer
Digital I.C. Trainer
Oil Testing Kit
Hygrometer
a. Cut out Relays
b. Reverse current
c. Over current
d. Under voltage
277
Starters for 2 to 5 H.P. A.C Motors
a. Resistance type starter
b. Direct on line Starter
c. Star Delta Starter- manual, semi-automatic and
automatic
d. Auto Transformer type
278
279
280
Bath Impregnating
Oven Stove
Lux meter
281
Domestic Appliances –
a. Electric Hot Plate 1500 watt
b. Electric Kettle, 1500 watts
c. Electric Iron 1500 watts
d. Immersion Heater 1500 watt
e. A.C. Fan
f. Geyser (Storage type) 15 ltr minimum
g. Mixture & Grinder
282
Thyristor /IGBT controlled D.C. motor drive with
tacho-generator feedback arrangement 1 HP
283
Thyristor/IGBT controlled A.C. motor drive with
VVVF control 3 Phase, 2 HP
284
285
286
287
288
289
290
291
292
293
294
Washing Machine 6.5kg
Motor Pump set 1 HP, 1 Phase, 240 V
Allen key set of 12 pieces (2mm to 14 mm)
Caliper inside 15 cm Spring
Caliper outside 15 cm Spring
Center punch 10 mm Dia. X 100 mm
Dividers 15 cm spring
Electrician screw driver 250 mm
Hammer ball peen 0.5 kg with handle
Hands file 20 cm second cut flat
Philips screw driver set of 5 pieces (100 mm to
300 mm)
Plier combination 20 cm
Screw driver 20 cm x 9 mm blade
Screw driver 30 cm x 9 mm blade
Scriber 15 cm
Spanner d.e set of 12 pieces 6 mm to 32 mm
Spanner ring set of 12 pieces 6 mm to 32 mm
Spanners socket with speed handle, T- barr,
ratchet &univeshalupto 32 mm st of 28 pieces
with box
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
Steel tool box with lock & key ( folding types)
400 x 200 x 150 mm
Wire cutter & stripper
AC Alternetorslipring pooler
Air blow gun with standard accessories
Air brake assembly
Air impact wrench with standard accessories
Air ratchet with standard accessories
Anti thesft device
Car jet washer with standard accessories
Coil spring compressor for suspension spring
Compression testing gauge suitable for diesel
engine with standard accessories
Connecting rod alignment fixture
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
Constant mesh gear box with stand for
dismantling & assembling
Cut section model of mocke layout of a motor
car electrical system working model
Cut section working model of automatic
transmission gear box
Cut section working model of centrifugal clutch
assembly
Cut section working model of diaphragm clutch
assembly
Cylnder liner dry & wet liner, press fit & slide fit
liner
Demonstration board of 2 W ignition system
ignition coil
Demonstration board of electronic ignition
system ignition coil
Demonstration board of MPFI system
Disk brake with caliper assembly
Drum brake assembiy
Front axle (Rzeeppa joint) with stand for
dismantling & assembling
Fuel feed pump for diesel
Fuel injection pump (diesel) inline
Fuel injection pump dismantling tool
kit/universal vice
Fuel injection pump VE pump/distributor fuel
rotary pump(DPC)pump/along with special tools
&accessories
Full floating axle &semi floating axle asembly
Functional experiment model of different types
of sensors
Horn &horn realy
Injector multi hole type,&pintle type
Injector cleaning unit
Injector testing set (hand tester)
Lifting jack screw type 5ton&,20 ton capacity
Multi point fuel injection pump
Oil pump for dismantling & assembling
Radiator pressure cap
Rear axle full floating types with stand for
dismanting and assembly
Starter motor axial type pre- engagement type &
coaxial type
Steel measuring tape 10 meter in a case
Stearing assembly 1. Rack & pinion,2. Worm &
roller, 3. Recirculating ball, 4. Power steering
Surface gauge with dail test indecator plunger
type i.e. 0.01 mm
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
Synchrenous gear box with stand for
dismanting& assembly
Tendem master cylinder with booster
Toe-in,toe-out gauge
Tread wear indicator
Tubeless tyre repair kit
Tyre & split rim wheel assembly
Vacumm assisted hydraulics brake assembly
with vacumm booster
Vacummguage to read 0-760 mm of Hg.
Water pump for dismanting& assembling
Wheel cylinder
Wiper motor assembly
Working model of power windows
Working model of torque convertor
Air big simulator
Air conditioned CRDI vehicle in running
condition LMV
Air condition servicing unit
Air conditioning traininer kit
Diesel Engine (running condition) stationary
type
Four stroke petrol engine CNG setup working
condition
Gas welding table 1220 x 760 mm
Hand operated hydrauic press
Heavy commercial vehicle type ( without body
on frame )
Hydraulic jack HIGH LIFT type 3 ton capacity &
5 ton capacity
MPFI petrol engine swivelling stand along with
special for dismanting& assembling
Spring tension tester
Transfer case with stand for dismantling &
assembling
Tube/tyre vulcanizing machine
Two post car lift capacity 4000 kg
Tyre changer machine
Ultra sonic injection cleaning equipment
Welding plant Oxy - Acetylence complete (high
pressure)
Wheel alignment machine computerised 3D
Wheel balancing machine
Working condition of Diesel Engine -CRDI 4
stroke engine assembly with fault simulation
board
Working condition of petrol MPFI engine
assembly with fault simulation board
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
Angle plate size 200 x 100 x 200 mm
Chiesl cross cut 200 x 6 mm
Dial gauge type 1 GR. A(complete with
clamping device & with magnatic stand)
Drill twist 1.5 mm to 15 mm ( variouse sizes) by
0.5 mm
Hacksaw frame adjustable 20 to 30 cm
Hand operated crimping tool (1) for crinping up
to 4 mm & (2) for crimping up to 10 mm
Hand reamers adjustable 10.5 to 11.25 mm,
11.25 to 12.75,12.75 to 14.25 mm & 14.25 to
15.75 mm
Spanner T flocks for screwing up & up screwing
inaccessible
Stud extractor set of 3
Vacumm gauge to read 0 to 760 mm of Hg
Book shelf ( glass penal) 6.5 x 3 x 1.5 feet
Computer chair
Computer table
Desktop computer &realated MS Office
Software
Fire extinguisher , first aid box
Internate connection with all accessoires
Laser printer
LCD Projector/ LED/LCD TV (42 Inch)
Multimedia DVD for automotive application /
subject
Online UPS 2 KVA
Storage rack 6.5 x 3 x 1.5 feet
Anvil 50 kg with stand
Auto electrical test bench
Electric testing screw driver
Engineers square 15 cm blade
Feeler gauge 20 blades (mtric )
Garage stand
Oil can 0.5/0.25 liter cap
Pipe cutting tool
Pipe flaring tool
Laptop: With i770 Intel Processor, 8 GB RAM,
1 TB HDD, WI-FI with license Operating or
Higher System and Antivirus - 01 Nos.
3. WORKSTATION/NODES –i700 (i7)
PROCESSOR or Higher 8 GB RAM or Higher 1
Terabyte HDD or Higher 22" TFT Monitor101
With wireless LAN Card DVD OR BLU-RAY
WRITER KEYBORD/INTERNET USB Optical
Mouse, USB Keyboard with latest license of
OS and Antivirus - Professional/Ultimate
Edition
412
WORKSTATION FOR MULTIMEDIA - 01 Nos.
i700 (i7) PROCESSOR or Higher 8 GB RAM or
Higher 1 Terabyte HDD or Higher With wireless
LAN Card 22" TFT Monitor101 DVD OR BLURAY WRITER KEYBORD/INTERNET USB
Optical Mouse, USB Keyboard with latest
license of OS with Antivirus Professional/Ultimate Edition
413
414
500 VA or higher off – line UPS FOR NODES
COLOUR LASER PRINTER
415
416
417
418
419
420
421
422
423
Network MONOCHROME LASER PRINTER
OPTICAL SCANNER (DESK TOP TYPE)
WEB CAM (DIGITAL CAMERA)
DVD OR BLU-RAY WRITER
Standalone HARDDISKS
LCD PROJECTOR
Network Rack
DSL Wireless Router
Wireless Router
2.
Firms are not allowed to change any specification.
3.
The delivery period of the material is 25 days from the date of issuance of
supply order which can be further extended on request for further seven days
on genuine cases.
4.
The pre delivery Inspection of items will be done at the site of firm on the cost
of the supplier. The supplier will intimate the date of inspection with 7 days
notice.
5.
100% percent payment will be made after supply of complete material in good
condition.
6.
The EMD amount for the supply will be Rs. 50000/- which will be returned to
unsuccessful bidder on clear decision that his firm is not in race of allotment of
the supply order. No interest will be payable on EMD.
7.
The tender’s form/bid will not be accepted without earnest money and
straightway rejected.
8.
Firm must submit valid ST, TIN, CST as applicable, along with PAN Number
and Copy of cancelled Cheque of Bidder Firm.
9.
Bidders need notto deposit the technical bid in hard.
10. Principal, Industrial Training Institute ,Narnaulhas right to change any term and
condition without any notice.
11.
The Department reserves the right to increase/decrease the quantity upto 25%
or cancel the whole order without assigning any reason.
12. The rate quoted must be including Packing, carrying, loading/unloading, Sale
tax, VAT charges, excise duty etc.
13.
The firm must have the experience of supplying the quoted items to any Govt.
Department of Haryana or UT Chandigarh in last three years. The relevant
documents as proof in this regard must be attached with the bid.
14.
EMD of material supplying Firm will be returned within one month of
completion of full supply order and satisfaction of the Department. No interest
shall be paid on EMD.
15. The firm has to supply material within the delivery period of supply order
otherwise penalty @ 1% percent of total cost will be imposed on the firm per
week of delay supply. On non-supplying of the items even after 30 days of the
expiry of the prescribed supply period, the full EMD may be forfeited.
16. Willing bidders shall have to pay non refundable Rs 1000/- for the e-Service fee
for online tendering.
17. The tender fee of Rs. 1000/- will have to be paid offline/online by the bidder
which is non refundable.
18.
E-Tender will be considered only of those firms who will deposit required EMD,
Tender Fee, eService fee before the last date.
19. The tenders will be opened on 15.12.2015 in the O/o Principal, Industrial
Training Institute ,Narnaul In case of any dispute, the jurisdiction will be at
Narnaul
20. Minimum Turn over 2.5 cr. (Turn over certificate should be enclosed).
Principal
Industrial Training Institute, Narnaul