Mounting instructions: Attaching the keyboard holder to the DLT-V72 / DLT-V83
1
For your safety
These mounting instructions apply to all DLT-V72 and DLT-V83 models. They describe
how to attach the appropriate Advantech-DLoG keyboard mounting kit.
WARNING
Risk of injury and damage due to improper installation
 Read and observe the mounting instructions carefully.
These mounting instructions are intended for skilled personnel. Only qualified skilled
personnel may mount/install DLT-V72 / DLT-V83 devices
 Keep them for future reference.
1.1 Tools required
WARNING
Risk of injury due to weight and sharp-edged parts.
−
Allen key (5 mm width for M6)
−
Socket wrench (size 7)
The DLT-V72 / DLT-V83 can fall down and cause injuries due to its weight. The
strain relief rail can have sharp edges and cause cutting injuries.
 Always hold the device by the housing with both hands.
1.2 Installation sequence
 Never use the antenna cap as a handle. It can break due to the weight
If the DLT-V72 / DLT-V83 is being used with a mounting bracket and a keyboard
mounting kit:
involved.
 Do not hold the device by the strain relief rail.
 Use the assistance of a second person for installation work.
 First attach the mounting bracket to the DLT-V72 / DLT-V83.
 Then attach the keyboard holder.
 Not until then, mount the complete system at the deployment location, e.g. to the
forklift.
Please note: In addition to the mounting bracket, one accessory holder each can be
attached (on each side).
 by DLoG GmbH 2015-2016
Mounting instructions: Attaching the keyboard holder to the DLT-V72 / DLT-V83, V2.00, PN 20DLDOCX88600E00
Page 1 / 7
Mounting instructions: Attaching the keyboard holder to the DLT-V72 / DLT-V83
2
DLT-V72: Attaching the front keyboard
holder
Parts required:
−
1 x Advantech-DLoG front keyboard holder
−
2 x cylinder-head screw DIN912 - M6x12 - A2 Tuflok
−
2 x washer ISO 8738 - A6-A2
−
2 x spacer sleeve, steel
 by DLoG GmbH 2015-2016
 DLT-V72:
Fasten the front
keyboard holder, step 1.
Mounting instructions: Attaching the keyboard holder to the DLT-V72 / DLT-V83, V2.00, PN 20DLDOCX88600E00
Page 2 / 7
Mounting instructions: Attaching the keyboard holder to the DLT-V72 / DLT-V83
3
DLT-V72: Attaching the keyboard holder
right/left
The figure shows the attachment of the keyboard holder on the right; the attachment on
the left is done analogously but mirror inverted.
 DLT-V72:
Fasten the front
keyboard holder,
step 2.
Parts required:
−
1 x Advantech-DLoG keyboard holder right/left
−
3 x cylinder-head screw DIN 912 - M6 x 10 - A2, Tuflok
−
3 x washer ISO 8738 - A6-A2
−
4 x nut M4 bevel washer
 DLT-V72:
Fasten the
keyboard holder
sidewards.
 by DLoG GmbH 2015-2016
Mounting instructions: Attaching the keyboard holder to the DLT-V72 / DLT-V83, V2.00, PN 20DLDOCX88600E00
Page 3 / 7
Mounting instructions: Attaching the keyboard holder to the DLT-V72 / DLT-V83
4
DLT-V83: Attaching the front keyboard
holder
Parts required:
−
1 x Advantech-DLoG front keyboard holder
−
4 x cylinder-head screw DIN 912 - M6 x 10 - A2 – Tuflok
−
6 x washer ISO 8738 - A6-A2
−
2 x spacer sleeve, steel M8 L3
−
4 x nut M4 bevel washer
 DLT-V83:
Fasten the front
keyboard holder,
step 2
 DLT-V83:
Fasten the front
keyboard holder,
step 1.
 by DLoG GmbH 2015-2016
Mounting instructions: Attaching the keyboard holder to the DLT-V72 / DLT-V83, V2.00, PN 20DLDOCX88600E00
Page 4 / 7
Mounting instructions: Attaching the keyboard holder to the DLT-V72 / DLT-V83
 DLT-V83:
Fasten the front
keyboard holder,
step 3.
 by DLoG GmbH 2015-2016
Mounting instructions: Attaching the keyboard holder to the DLT-V72 / DLT-V83, V2.00, PN 20DLDOCX88600E00
 DLT-V83:
Fasten the front
keyboard holder,
step 4.
Page 5 / 7
Mounting instructions: Attaching the keyboard holder to the DLT-V72 / DLT-V83
5
DLT-V83: Attaching the keyboard holder
right/left
 DLT-V83:
The figure shows the attachment of the keyboard holder on the left; the attachment on
the right is done analogously but mirror inverted.
Fasten the
keyboard holder
sidewards,
step 2.
Parts required:
−
1 x Advantech-DLoG keyboard holder right/left
−
3 x cylinder-head screw DIN 912 - M6 x 10 - A2, Tuflok
−
3 x washer ISO 8738 - A6-A2
−
4 x nut M4 bevel washer
 DLT-V83:
Fasten the
keyboard holder
sidewards,
step 1.
 by DLoG GmbH 2015-2016
Mounting instructions: Attaching the keyboard holder to the DLT-V72 / DLT-V83, V2.00, PN 20DLDOCX88600E00
Page 6 / 7
Mounting instructions: Attaching the keyboard holder to the DLT-V72 / DLT-V83
6
Technical customer support
E-Mail: helpdesk@advantech-dlog.com
Web: www.advantech-dlog.com
DLoG GmbH
Industriestraße 15
D-82110 Germering
Phone: (+49) 89 / 41 11 91 999
Attaching keyboard holder to DLTV72 / DLT-V83
Mounting instructions V2.00
PN 20DLDOCX88600E00
01/20/2016
 by DLoG GmbH 2015-2016
We reserve the right to make changes to these mounting instructions at any time and
without prior notice. DLoG GmbH accepts no liability for any technical or printing errors
or shortcomings in these instructions. DLoG GmbH accepts no liability for any damage
caused directly or indirectly by the delivery, performance or use of this material.
 by DLoG GmbH 2015-2016
Mounting instructions: Attaching the keyboard holder to the DLT-V72 / DLT-V83, V2.00, PN 20DLDOCX88600E00
Page 7 / 7