VESTA-AR MV Metal Clad Arc Resistant Switchgear

IEM Product

VESTA-AR

MV Metal Clad

Arc Resistant

Switchgear

VESTA-AR™ medium voltage metal clad arc resistant switchgear with magnetically actuated circuit breaker technology is designed to meet the needs of customers who demand the highest quality power distribution assembly with the smallest footprint (24” x 96” x 60”).

VESTA-AR fulfills the requirement for a switchgear assembly that makes efficient use of available floor space and minimizes the time required for inspection, repair and maintenance of equipment. IEM’s arc resistant technology ensures a safe and reliable solution for maintenance personnel and facility in the event of an arc flash.

IEM Metal-Clad Arc Resistant Switchgear

• Voltage 5-15kV; 95kV BIL

• Ampacity 600A – 1200A; 31.5kA

• Dimensions / 1200A: 24” x 96” x 60”

• Dimensions / 2000A: 30” x 96” x 72”

• Magnetically actuated breaker—up to 100,000 operations

• Full front accessibility

• Draw out breaker, PT & CPT

• Front accessible 600V CT’s and front connected cables

• Shortest breaker pole spacing between phases

• Infrared viewing ports

• Front and rear viewing windows

• Epoxy insulated bus bar configuration optimized for maximum heat dissipation

• Plenum design incorporated into structural configuration—No additional

height requirement

• UL & cUL Listed; Type 2A and 2B in accordance with ANSI/IEEE standards

Smallest footprint

Magnetically actuated VM1 circuit breaker technology

Front Accessibility

Rear Viewing Windows

Infrared (IR) Viewing Ports

(Optional)

Insulated Bus Bar System

Indoor and Outdoor

Applications

UL Listed; Meets ANSI, IEEE, and NEMA Standards

Patents Pending

IEM Product: Metal-Clad Medium Voltage Switchgear

Front Accessibility

Full front accessibility for cable connections and current transformers (CT); this design feature ensures ease of maintenance, minimal usage of floor space and creates a safe environment.

Magnetically Actuated Breaker

Magnetically actuated breakers operate up to 100,000 times without maintenance. These breakers feature far fewer parts and much simpler construction and are among the most reliable in the industry.

Rear Viewing Windows

Larger viewing casement allows complete access to viewing of the bus bar compartment for maintenance to assess any signs of overheating of the bus.

Infrared (IR) Viewing Ports (Optional)

Front and rear infrared viewing ports allow maintenance personnel to easily access thermal monitoring of the equipment without having to open the enclosure.

Insulated Bus Bar System

Medium Voltage insulating and support system with specialty designed structure for current transformers (CT’s). Epoxy insulated bus as standard.

Testing

Rigorous testing shows fully reinforced and sealed joints, hinges and latches, which reduce the risk of damage to maintenance personnel and other existing equipment in the event of an arc flash.

Technical Specifications

UL & cUL Listed, Meets or exceeds type 2A and 2B in accordance with

ANSI/IEEE 37.20.7.

Multiple configurations available.

7

8

9

10

11

12

3

4

1

2

5

6

A

B

E

C

D

19

20

21

22

17

18

15

16

13

14

A Low-voltage compartment

B Mid compartment

C Central compartment

D Bottom compartment

E Exhaust compartment

1 Wire-way

2 Low-voltage door

3 Breaker plug connector

4 Mid compartment door

5 Viewing window - front

6 Door Handle

7 Medium-voltage breaker

8 Circuit breaker racking hole

9 Bottom compartment door

10 Infrared viewing window

11 Cables

12 Base

13 Exhaust plenum

14 Back door

15 Epoxy insulated busbars

16 Viewing window - back

17 Current transformers

18 Standoff insulators

19 High-voltage cable

20 Bus boots

21 Surge arrestors

22 Grounding busbar

Tradition. Technology. Innovation.

Corporate Office

Industrial Electric Mfg

48205 Warm Springs Blvd

Fremont CA 94539 dir 510.656.1600

Vancouver Office

Industrial Electric Mfg

Unit 201 - 27353 58th Crescent

Langley BC V4W 3W7 dir 866.302.9836

Jacksonville Office

Industrial Electric Mfg

11902 Central Parkway

Jacksonville FL 32224 dir 904.365.4444

©2013 IEM. Industrial Electric Mfg ™ and the IEM logo design are trademarks of Industrial Electric Mfg. in the U.S. and other countries. All rights reserved. VESTA-AR.DS.v1

www.iemfg.com

IEM Panelboards

IEM panelboards are designed to meet the needs of any electrical distribution system. Lighting, Distribution, and Receptacle

Panelboards can be custom engineered featuring leading manufacturer’s components and state-of-the-art surge suppression equipment. Standard panelboard configurations are also available.

PIE Panelboard

Features/Benefits

• Voltage: Up to 600Vac, 250Vdc maximum

• Ampacity: 250A to 600A

• 65kA at 480V maximum

• UL or CSA listed

• Single phase and three phase

• Series ratings with upstream devices

• Main breaker, main lugs, subfed breaker – optional

• 10K thru 65K SCCR (AIC) – interrupting capacity

• Vertically mounted main and sub-feed circuit breakers

• Up to 84 circuits in one panel

• Interiors available in plated copper or aluminum bus

• Complete line of UL listed interiors with 200% rated neutrals for non-linear loads

• Surge Suppression Equipment/Optional integrated TVSS

• Configured for sequence phase connections allowing complete flexible circuit

arrangement (1-, 2- or 3-poles) to properly balance the electrical load on each phase

• Lock and door opening mechanism includes a positive slide catch and right- or

left-hand installation

• Multi section boards – bolted together and bush openings (horizontal and vertical)

• Standard or door in door trims

• ANSI 61 light gray standard finish, other colors available as option

• Stainless steel and aluminum available

Full Customization and Design

Flexibility

New 65K AIC/480V UL Rating for PIE (E Frame) Versions

New 84 Circuit Designs in UL

Heat Rise Testing complete

New Emergency (Fuse/

Breaker) Panels in Final UL

Heat Rise Testing complete

Beginning conceptual design for new “universal” power panel

Seismic shake table testing completed – fully qualified to worst case response spectrum.

IEM Product: Panelboards

PIU Panelboards

Features/Benefits

• Voltage: Up to 600Vac,

250Vdc maximum

• Ampacity: 250A to 400A

• 14kA at 480V

• 65kA at 240V

• UL or CSA listed

• Single phase and three phase

• Main breaker, main lugs,

subfed breaker – optional

• 10K thru 65K SCCR (AIC) –

interrupting capacity

• Vertically mounted main and sub-feed circuit breakers

• Up to 84 circuits in one panel

• Interiors available in plated copper or aluminum bus

• An interior accepts bolt-on or plug-on branch circuit

breakers

• Complete line of UL listed interiors with 200% rated

neutrals for non-linear loads

• Surge suppression equipment/optional integrated TVSS

• Configured for sequence phase connections allowing

complete flexible circuit arrangement (1-, 2- or 3-poles) to

properly balance the electrical load on each phase.

• Lock and Door opening mechanism includes a positive

slide catch and right- or left-hand installation.

• Multi section boards – bolted together and bush openings

(horizontal and vertical)

• Standard or door in door trims

• ANSI 61 light gray standard finish, other colors available

as option

• Stainless steel and aluminum available

CDP Panelboards

Features/Benefits

• Voltage: Up to 600Vac,

250Vdc Maximum

• Ampacity: 250A to 1200A

• UL or CSA listed

• Single phase and three-phase

• 10K thru 200K SCCR (AIC) –

Interrupting Capacity (100kA

at 480V, 200kA at 240V)

• Series ratings with upstream

devices

• Interiors available in plated

copper or aluminum bus

• Main breaker or main lugs

• Fully rated or series rated

• Selection includes most commercially available molded

case circuit breakers from industry leading manufacturers

• Standard or door in door trims

• ANSI 61 light gray standard finish, other colors available

as option

• Stainless steel and aluminum available

IEM Difference

Superior Enclosures – All equipment enclosures are designed for specific application and dimensional flexibility.

All enclosures are finished using a state of the art powder coating system providing an indoor finish that exceeds the

1500 hour salt spray testing requirement for outdoor equipment to 3000 hours.

Technical Specifications

IEM Panelboards meets UL 67, UL 50, CSA and NEMA

PB-1 standards and complies with federal specifications

WP- 115a

Distribution panelboards meet seismic testing, circuit requirements as outlined by IEEE344 and ICC-ES-AC156

Industrial Electric Mfg.

™ (IEM)

Headquartered in Fremont, CA, IEM is the largest independent full-line manufacturer of electrical distribution and power quality equipment in the U.S. For over half a century, IEM has delivered customer-specific solutions to meet the ever changing power requirements of growth industries in North America. At IEM, tradition and technology still drive innovation. An experienced engineering staff and one of the most flexible design and manufacturing systems in the industry set IEM apart from standard product manufacturers.

Tradition. Technology. Innovation.

Corporate Office

Industrial Electric Mfg ™

48205 Warm Springs Blvd

Fremont CA 94539 dir 510.656.1600

Vancouver Office

Industrial Electric Mfg ™

Unit 201 - 27353 58th Crescent

Langley BC V4W 3W7 dir 866.302.9836

Jacksonville Office

Industrial Electric Mfg ™

11902 Central Parkway

Jacksonville FL 32224 dir 904.365.4444

©2013 IEM. Industrial Electric Mfg ™ and the IEM logo design are trademarks of Industrial Electric Mfg. in the U.S. and other countries. All rights reserved. 1.Panelboards_DS.v4

www.iemfg.com

IEM Low Voltage

Switchboards

Switchboards can be custom designed or utilize a standard configuration to meet specific dimensional and electrical requirements. They can include fully integrated component options from leading manufacturers, including automatic transfer switches, TVSS, distribution transformers, and

PLC or relay based transfer schemes. Circuit breakers and fusible switches can be group or individually mounted. Indoor and outdoor enclosures are available in a wide range of durable color finishes.

Features/Benefits

• Voltage - Up to 600Vac, Up to 250Vdc maximum

• Ampacity - 400A to 12,000A maximum bus rating

• 65 kAIC standard bus bracing (100 or 200kAIC - optional)

• Switchboard ratings through 12,000A, 200kAIC up to 480V, 100kAIC up to 600V

• Type 1 or 3R NEMA enclosures

• Paint ANSI 61 – Standard, other colors available as option

• Front, rear, and side accessibility

• Devices can be individually (vertically) or group (panel/horizontally) mounted

• Custom sheet metal and bus flexibility for busway and transformer connections

• Extensive protective device accessories available

• Silver-plated copper bus, tin-plated copper bus or tin-plated aluminum bus

• 1000A per sq in. fully rated copper bus systems

• 750A per sq in. fully rated aluminum bus systems

• Tested to short circuit rating of 3 cycles (.05sec.) or to immediate trip of

tested OCPD or braced to UL configuration standards

• Rigid frame construction isolating bus and breaker assemblies from enclosure

• Metering compartments built to applicable Utility’s standards

• Variety of fully integrated component options available including automatic

transfer switches, TVSS, distribution transformers, and PLC or relay based

transfer schemes

Full Customization and Design

Flexibility

Component and Metering

Selection Options

Fully Rated Bus Based on

Density Ratings

Seismic Tested to Worst Case

Response Spectrum

Indoor and Outdoor

Applications

UL or CSA Listed; Meets ANSI,

IEEE, and NEMA Standards

IEM Product: Low Voltage Switchboards

Features/Benefits (cont’d)

• Front accessible line connections for main device

• Front accessible load connections for feeder devices

• Switchboard fed by cables, cable bus, bus duct, or transformer

• Thermal-magnetic, electronic fixed mounted circuit breaker mains and feeders,

Fix-mounted fusible switch mains and feeders or combination of fixed mounted

breakers and fusible switches

• Main and branch devices in single section configurations

• Thermal magnetic, electronic circuit breakers with standard, high kAIC or

current limiting capability, 80% or 100% rated

• All commercially available options on circuit breakers and fusible switches

IEM Difference

Fully rated bus is based on density ratings, not UL heat rise tests, resulting in more bus and lower operating temperatures.

All enclosures are designed for specific application with improved dimensional flexibility and finished using state of the art powder coating system providing an indoor finish that exceeds the 1500 hour salt spray testing requirement for outdoor equipment to 3000 hours.

Component and metering selections are based on value engineering for the application and optimized to meet specifications.

Recent Developments

UL 200K AIC ratings at 480V through 12,000A with suitably rated components

UL 100K AIC at 600V from 3000A to 12,000A ratings with suitably rated components

UL 100K AIC ratings for commercial metering with suitably rated MCCB

Seismic testing completed – fully qualified to worst case response spectrum

Technical Specifications

IEM Switchboards meet or exceed applicable industry standards, including UL891,

CSA, NEMA standards PB-2, NEMA 1 and NEMA 3R enclosures. Uses UL489 or

UL1066 listed breakers.

IEM Distribution Switchboards meet seismic testing, circuit requirements as outlined by IEEE344 and ICC-ES-AC156.

Industrial Electric Mfg.

™ (IEM)

Headquartered in Fremont, CA, IEM is the largest independent full-line manufacturer of electrical distribution and power quality equipment in the U.S. For over half a century, IEM has delivered customer-specific solutions to meet the ever changing power requirements of growth industries in North America. At IEM, tradition and technology still drive innovation. An experienced engineering staff and one of the most flexible design and manufacturing systems in the industry set IEM apart from standard product manufacturers.

Tradition. Technology. Innovation.

Corporate Office

Industrial Electric Mfg ™

48205 Warm Springs Blvd

Fremont CA 94539 dir 510.656.1600

Vancouver Office

Industrial Electric Mfg ™

Unit 201 - 27353 58th Crescent

Langley BC V4W 3W7 dir 866.302.9836

Jacksonville Office

Industrial Electric Mfg ™

11902 Central Parkway

Jacksonville FL 32224 dir 904.365.4444

©2013 IEM. Industrial Electric Mfg ™ and the IEM logo design are trademarks of Industrial Electric Mfg. in the U.S. and other countries. All rights reserved. 2.Switchboards_DS.v4

www.iemfg.com

IEM Low Voltage

Power Circuit

Breaker Switchgear

IEM’s unique approach to engineering and manufacturing allows us to assemble products that meet specialized dimensional and electrical requirements.

Our flexible capabilities allow for the selection of industry leading components including control and measuring devices, allowing for a superior, fully customizable control and monitoring electrical assembly. This is just one element of IEM’s superior control solutions to provide protection and operational reliability for any quality power distribution assembly.

Depending on the users’ technical and physical requirements,

UL 1066 power circuit breakers can be mounted in a fixed or drawout configuration. Indoor, outdoor non walk-in enclosures are available in an extensive selection of durable color finishes.

Features/Benefits

• Voltage: up to 600V; Ampacity: up to 5000A

• UL 1066 Circuit Breaker; or CSA

• Through the door breaker operation

• Front accessibility to control and communication wiring

• Isolated access to all wiring

• All breakers have unique drawout design allowing for through-the-door racking

• Short-circuit rating 125kA / 100kA (600V)

• Short-time withstand rating up to 100kA / 85kA (600V)

• Bolted copper bus provided as standard

• Large rear cable compartment pull area allowing maximum room for power cables

• Bus provision for future equipment expansion

Full Customization and Design

Flexibility

Component and Metering

Selection Flexibility

Bus Based on Density Ratings

Seismic Tested to Worst Case

Response Spectrum

Indoor and Outdoor

Applications

UL or CSA Listed; Meets ANSI,

IEEE, and NEMA Standards

IEM Product: Low Voltage Switchgear

Features/Benefits (cont’d)

• System designed for maximum uptime with low maintenance

• Modular circuit breaker designed for easy addition of control accessories

• Circuit breakers are available in various levels of interrupting ratings from 42–200kA

at 480V and 130kA at 600V

• Circuit breaker is available in an 800A frame size and 42kA at 480V interrupting

rating

• Up to 4 circuit breakers can be mounted in a 30-inch wide section (up to 1200A)

• Circuit breakers of like frame sizes and interrupting ratings are interchangeable

• Available in NEMA 3R outdoor enclosures

IEM Difference

All enclosures are designed for specific application with improved dimensional flexibility and finished using state of the art powder coating system providing an indoor finish that exceeds the 1500 hour salt spray testing requirement for outdoor equipment to 3000 hours.

Component and metering selections are based on value engineering for the application and optimized to meet specifications.

Recent Developments

Seismic testing completed – fully qualified to worst-case response spectrum.

Technical Specifications

IEM Low Voltage Switchgear meets or exceeds applicable standards including ANSI C37.20.1.

IEM Low Voltage Switchgear meets seismic testing, circuit requirements as outlined by IEEE344 and ICC-ES-AC156.

Industrial Electric Mfg.

™ (IEM)

Headquartered in Fremont, CA, IEM is the largest independent full-line manufacturer of electrical distribution and power quality equipment in the U.S. For over half a century, IEM has delivered customer-specific solutions to meet the ever changing power requirements of growth industries in North America. At IEM, tradition and technology still drive innovation. An experienced engineering staff and one of the most flexible design and manufacturing systems in the industry set IEM apart from standard product manufacturers.

Tradition. Technology. Innovation.

Corporate Office

Industrial Electric Mfg ™

48205 Warm Springs Blvd

Fremont CA 94539 dir 510.656.1600

Vancouver Office

Industrial Electric Mfg ™

Unit 201 - 27353 58th Crescent

Langley BC V4W 3W7 dir 866.302.9836

Jacksonville Office

Industrial Electric Mfg ™

11902 Central Parkway

Jacksonville FL 32224 dir 904.365.4444

©2013 IEM. Industrial Electric Mfg ™ and the IEM logo design are trademarks of Industrial Electric Mfg. in the U.S. and other countries. All rights reserved. LVSwtchgr_DS.v5.1

www.iemfg.com

Metal-Clad

Medium Voltage

Switchgear

Vacuum Circuit Breakers

IEM’s vacuum circuit breaker product line is available in the 5kV,

15kV, and 27kV classes in outdoor non-walk-in, outdoor walk-in and indoor enclosures. Optional component selection including different choices for protective relays, metering devices and circuit breakers for specific applications. This customizable feature makes

IEM an ideal choice for unique projects and for matching or upgrading existing installations.

IEM Metal-Clad Switchgear (Circuit Breaker Assemblies)

• Voltage 2400V – 27kV

• Ampacity 600A – 3000A

• Optimal component selection includes any commercially available vacuum

circuit breaker from industry leading manufacturers

• Rear access for load and incoming connections

• Compartmentalized construction with breaker compartment for each device

• One-high or two-high construction

• Unit substation primaries

• Indoor or Outdoor applications

Full Customization and Design

Flexibility

Component and Metering

Selection Options

Fully Rated Bus Based on

Density Ratings

Standard Mechanical Circuit

Breakers

Magnetically Actuated Circuit

Breakers

Seismic Tested to Worst Case

Response Spectrum

Indoor and Outdoor

Applications

UL or CSA Listed; Meets ANSI,

IEEE, and NEMA Standards

IEM Product: Metal-Clad Medium Voltage Switchgear

IEM Difference

Fully rated bus is based on density ratings, not UL heat rise tests, resulting in more bus and lower operating temperatures.

All enclosures are designed for specific application with improved dimensional flexibility and finished using state of the art powder coating system providing an indoor finish that exceeds the 1500 hour salt spray testing requirement for outdoor equipment to 3000 hours.

Component and metering selections are based on value engineering for the application and optimized to meet specifications.

Recent Developments

Seismic testing completed – fully qualified to worst case response spectrum.

Technical Specifications

IEM Switchgear meets or exceeds all ANSI, IEEE, and NEMA standards applicable to metal clad switchgear including C37.20, C37.20.2, C37.20.3,

C37.55, C37.57, and NEMA SG-4.

IEM Switchgear meets seismic testing, circuit requirements as outlined by IEEE344 and ICC-ES-AC156.

NEMA 1 and 3R

IEM Medium Voltage Component Selection Ratings

5kV

Nominal Voltage Nominal 3-phase class (MVA)

Continuous Current Short Circuit Current

Rating

Power Withstand

Frequency

BIL Crest Impulse

Voltage (kV)

Momentary

Close & Latch

4.16

4.16

4.16

250

350

450

1200, 2000, 3000

1200, 2000, 3000

1200, 2000, 3000

29

41

63

19

19

19

60

60

60

58

78

101

Rated Interrupting

Time (cycle/ms)

5 / 50

5 / 50

5 / 50

Maximum

Symmetrical

Interrupting

Capability

36

49

63

Short Time Current

3 Sec Carrying

Capability(kA)

36

49

63

15kV

Nominal Voltage

13.8

13.8

13.8

Nominal 3-phase class (MVA)

Continuous Current Short Circuit Current

Rating

Power Withstand

Frequency

BIL Crest Impulse

Voltage (kV)

Momentary

Close & Latch

500

750

1000

1200, 2000, 3000

1200, 2000, 3000

1200, 2000, 3000

18

28

37

36

36

36

95

95

95

37

58

77

Rated Interrupting

Time (cycle/ms)

5 / 50

5 / 50

5 / 50

Maximum

Symmetrical

Interrupting

Capability

23

36

48

Short Time Current

3 Sec Carrying

Capability(kA)

23

36

48

Industrial Electric Mfg.

™ (IEM)

Headquartered in Fremont, CA, IEM is the largest independent full-line manufacturer of electrical distribution and power quality equipment in the U.S. For over half a century, IEM has delivered customer-specific solutions to meet the ever changing power requirements of growth industries in North America. At IEM, tradition and technology still drive innovation. An experienced engineering staff and one of the most flexible design and manufacturing systems in the industry set IEM apart from standard product manufacturers.

Tradition. Technology. Innovation.

Corporate Office

Industrial Electric Mfg ™

48205 Warm Springs Blvd

Fremont CA 94539 dir 510.656.1600

Vancouver Office

Industrial Electric Mfg ™

Unit 201 - 27353 58th Crescent

Langley BC V4W 3W7 dir 866.302.9836

Jacksonville Office

Industrial Electric Mfg ™

11902 Central Parkway

Jacksonville FL 32224 dir 904.365.4444

www.iemfg.com

©2013 IEM. Industrial Electric Mfg ™ and the IEM logo design are trademarks of Industrial Electric Mfg. in the U.S. and other countries. All rights reserved. 4.1.MVSwtchgr_MetalClad.DS.v8

Metal-Enclosed

Medium Voltage

Switchgear

Fusible Load Interrupters

IEM’s fusible load interrupter product line is available in the 5kV,

15kV, and 27kV classes in outdoor non-walk-in, outdoor walk-in and indoor enclosures. IEM metal enclosed switchgear utilizes a compartmentalized construction isolating the bus, cable, and main switches and allowing for minimal maintenance and use of interior barriers.

Metal-enclosed switchgear can be configured to meet unique physical and electrical requirements.

IEM Metal-Enclosed Switchgear (Fusible Load Interrupters)

• Voltage 2400V – 27kV

• Ampacity 600A – 3000A

• Rear access for load and incoming connections

• Front connections when required

• Single phase load protection when required

• Arranged to metal clad configuration if applicable

• Compartmentalized construction including utility metering for most U.S. utilities

• Unit substation primaries

• Indoor or outdoor application

Full Customization and Design

Flexibility

Component & Metering

Selection Options

Cost-effective Option Provides

Safe, Dependable Switching and Fault Protection

Seismic Tested to Worst Case

Response Spectrum

Indoor and Outdoor

Applications

UL or CSA Listed; Meets ANSI,

IEEE, and NEMA Standards

IEM Product: Metal-Enclosed Medium Voltage Switchgear

IEM Difference

All enclosures are designed for specific application with improved dimensional flexibility and finished using state of the art powder coating system providing an indoor finish that exceeds the

1500 hour salt spray testing requirement for outdoor equipment to

3000 hours.

Component and metering selections are based on value engineering for the application and optimized to meet specifications.

Recent Developments

Seismic testing completed – fully qualified to worst case response spectrum.

Technical Specifications

IEM Switchgear meets or exceeds all ANSI,

IEEE, and NEMA standards applicable to metalenclosed switchgear including C37.20, C37.20.2,

C37.20.3, C37.55, C37.57, and NEMA SG-4.

IEM Switchgear meets seismic testing, circuit requirements as outlined by IEEE344 and

ICC-ES-AC156.

NEMA 1 and 3R enclosures

Industrial Electric Mfg.

™ (IEM)

Headquartered in Fremont, CA, IEM is the largest independent full-line manufacturer of electrical distribution and power quality equipment in the U.S. For over half a century, IEM has delivered customer-specific solutions to meet the ever changing power requirements of growth industries in North America. At IEM, tradition and technology still drive innovation. An experienced engineering staff and one of the most flexible design and manufacturing systems in the industry set IEM apart from standard product manufacturers.

Tradition. Technology. Innovation.

Corporate Office

Industrial Electric Mfg ™

48205 Warm Springs Blvd

Fremont CA 94539 dir 510.656.1600

Vancouver Office

Industrial Electric Mfg ™

Unit 201 - 27353 58th Crescent

Langley BC V4W 3W7 dir 866.302.9836

Jacksonville Office

Industrial Electric Mfg ™

11902 Central Parkway

Jacksonville FL 32224 dir 904.365.4444

www.iemfg.com

©2013 IEM. Industrial Electric Mfg ™ and the IEM logo design are trademarks of Industrial Electric Mfg. in the U.S. and other countries. All rights reserved. 4.2MetalEnclSwitchgear_DS.v3

Paralleling

Switchgear And

Control Systems

IEM Paralleling Switchgear and Control Systems are designed and manufactured to deliver full control of custom-configured power generation systems. They integrate all facets of metering, protection, communication and controls to deliver peak performance, system reliability and operating economy.

IEM’s experience with generators and voltage regulators from all major North American manufacturers, governor systems for prime movers, and proprietary engine controllers results in efficient and innovative parallel switchgear designs for redundant power applications.

Types of Configured Power Systems

• Prime Power – where generators are the only source or main source of power

as in island-mode, marine, remote site or military type applications.

• Standby – where the generators serve as back-up to the main (utility) source,

commonly installed in hospitals, airport, data centers, waste-water/water

treatment facilities, including most life-safety institutional applications.

• Distributed Generation Systems – where generators are applied to supplement

the main source (as in peak shave applications) and may also act as the

standby system as well.

Full Customization and Design

Flexibility

Component and Metering

Selection Flexibility

Fully Rated Bus Based on

Density Ratings

Operator interface touchscreen terminals (OIT)/Human

Machine Interface (HMI)

Seismic Tested to Worst Case

Response Spectrum

Indoor and Outdoor

Applications

UL or CSA Listed; Meets ANSI,

IEEE, and NEMA Standards

IEM Product: Paralleling Switchgear

Intrinsic System Features

• Load priority control where loads are applied from a pre-determined

sequence, highest to lowest priority, based on system capacity and

characteristics.

• Generator operational control where only the pre-determined number of

generators are asked to start and carry load, either in a scramble or preset

start-sequence.

• Operator interface touch-screen terminals (OIT)/Human Machine Interface

(HMI) where system controls and interrogation can be accomplished at the

switchgear or from a remote network/PC/PLC.

• Remote communications in the most common industry protocols like

modbus/canbus and being fully conversant with industry leading

Ethernet/interface modules, comm-ports and RS 485 type connections.

• Utility paralleling system designs in passive closed transition (waiting for the

sources to become synchronized in voltage, frequency and phase angle), active

closed transition (where synchronization is dynamically controlled), soft load or

continuous base loading systems.

IEM Difference

Fully rated bus is based on density ratings, not UL heat rise tests, resulting in more bus and lower operating temperatures.

All enclosures are designed for specific application with improved dimensional flexibility and finished using state of the art powder coating system providing an indoor finish that exceeds the 1500 hour salt spray testing requirement for outdoor equipment to 3000 hours.

Wide range of component selection including breakers, meters, relays.

Component and metering selections are based on value engineering for the application and optimized to meet specifications.

Recent Developments

Seismic testing completed – fully qualified to worst case response spectrum.

Technical Specifications

IEM Switchgear meets seismic testing, circuit requirements as outlined by IEEE344 and ICC-ES-AC156.

Industrial Electric Mfg.

™ (IEM)

Headquartered in Fremont, CA, IEM is the largest independent full-line manufacturer of electrical distribution and power quality equipment in the U.S. For over half a century, IEM has delivered customer-specific solutions to meet the ever changing power requirements of growth industries in North America. At IEM, tradition and technology still drive innovation. An experienced engineering staff and one of the most flexible design and manufacturing systems in the industry set IEM apart from standard product manufacturers.

Tradition. Technology. Innovation.

Corporate Office

Industrial Electric Mfg ™

48205 Warm Springs Blvd

Fremont CA 94539 dir 510.656.1600

Vancouver Office

Industrial Electric Mfg ™

Unit 201 - 27353 58th Crescent

Langley BC V4W 3W7 dir 866.302.9836

Jacksonville Office

Industrial Electric Mfg ™

11902 Central Parkway

Jacksonville FL 32224 dir 904.365.4444

www.iemfg.com

©2013 IEM. Industrial Electric Mfg ™ and the IEM logo design are trademarks of Industrial Electric Mfg. in the U.S. and other countries. All rights reserved. 6.PrllngSwitchgear_DS.v3

38kV Metal-Clad

Medium Voltage

Switchgear

IEM’s medium voltage product line is now available in the 38kV class in indoor, outdoor non-walk-in, and outdoor enclosures.

The 38kV mechanically complete switchgear rated for 40kA is also available with CSA listing when required and applicable, and meets also the seismic requirements of the UBC code.

Features/Benefits

• Voltage: 38kV

• Ampacity: 1200A, 2000A

• Basic Insulation Level (BIL): 150kV

• Breaker interrupter ratings: Up to 40kV

• NEMA 1: 42” W x 123” D x 95” H

• NEMA 3R: 42” W x 132” D x 107” H

• Advanced vacuum circuit breaker

• Compartmentalized construction with breaker compartment for each device

• Breaker & PT can be constructed into one section (feeder only)

• Main-tie-main automatic transfer scheme

• Rear access for load and incoming connections

• Indoor or outdoor applications

ANSI/IEEE C37.20.2

Metal-Clad Switchgear

ANSI/IEEE C37.04

Rating Structure for High

Voltage Circuit Breakers

ANSI/IEEE C37.54

Indoor HV Breakers in Metal

Enclosure Conformance Test

ANSI/IEEE C37.55

Medium Voltage Metal-Clad

Assemblies

ANSI/IEEE C37.09

Test Procedure for AC HV

Breakers on Sym Current basis

CSA Listed

IEM Product: 38kV Metal-Clad Medium Voltage Switchgear

Vacuum Circuit Breaker

A state-of-the-art ANSI/IEEE vacuum circuit breaker with full interchangeable capabilties allows for a 2000A unit that can be applied into a cubicle rated for 1200A, thus providing flexibility for operation and maintenance requirements.

• Full Roll on the floor – No accessories required (Lift truck, ramp, etc.)

• Manual and electrical (motor) spring charging

• Front Operation and front access to operating mechanism

• AC or DC auxiliary voltage

• Under voltage release and second shunt trip optional

• Capacitor trip device – external when AC required

• Standard fast interruption: 3 Cycles

• SIS – 600V secondary wiring

• 4NO + 4NC auxiliary contacts

• Operation counter and charge/discharge spring indicator

• Front access to position indicator.

• Safe and reliable flexible secondary disconnect signals

Breaker Ratings:

Insulation /

Withstand

Class

Current

Rated Transient

Recovery Voltage

(TRV)

Operation

Time

VIDER

VVA

38 34.5

60 1.0

80 170 1200A

2000A

40 104 40 65.2

109 0.6

2 0.05

3 0-C-O 4 A/B

Industrial Electric Mfg.

™ (IEM)

Headquartered in Fremont, CA, IEM is the largest independent full-line manufacturer of electrical distribution and power quality equipment in the U.S. For over half a century, IEM has delivered customer-specific solutions to meet the ever changing power requirements of growth industries in North America. At IEM, tradition and technology still drive innovation. An experienced engineering staff and one of the most flexible design and manufacturing systems in the industry set IEM apart from standard product manufacturers.

Tradition. Technology. Innovation.

Corporate Office

Industrial Electric Mfg™

48205 Warm Springs Blvd

Fremont CA 94539 dir 510.656.1600

Vancouver Office

Industrial Electric Mfg™

Unit 201 - 27353 58th Crescent

Langley BC V4W 3W7 dir 866.302.9836

Jacksonville Office

Industrial Electric Mfg™

11902 Central Parkway

Jacksonville FL 32224 dir 904.365.4444

©2013 IEM. Industrial Electric Mfg ™ and the IEM logo design are trademarks of Industrial Electric Mfg. in the U.S. and other countries. All rights reserved. www.iemfg.com

IEM Unit

Substation

IEM’s Unit Substations can utilize any configuration up to 27kV. They are designed and assembled to accommodate any commercially available transformer for either indoor or outdoor applications.

IEM Unit Substation

• Primary – Air terminal chamber, vacuum circuit breaker or load interrupter

switch to 27kV

• Transformer – Any commercially available transformer

• Secondary – Circuit breaker or fusible switches, UL 891, UL 1558, or CSA

switchgear

• Maximum flexibility with wide range of components and ratings to meet

application specifics

• Indoor or Outdoor assemblies/construction

• Configures to any transformer manufacturer available

• Comprehensive substation composite layout drawings.

• Superior flexibility options including increased utilization of space

• Improved voltage regulation and lowered power losses

• Complete coordination of substation components ensures precise fit

• Minimizes the use of secondary distribution cables and busway

IEM Difference

Fully rated bus is based on density ratings, not UL heat rise tests, resulting in more bus and lower operating temperatures.

All enclosures are designed for specific application with improved dimensional flexibility and finished using state of the art powder coating system providing an indoor finish that exceeds the 1500 hour salt spray testing requirement for outdoor equipment to 3000 hours.

Component and metering selections are based on value engineering for the application and optimized to meet specifications.

Technical Specifications

IEM Switchgear meets seismic testing, circuit requirements as outlined by

IEEE344 and ICC-ES-AC156.

Conforms to any commercially available transformer

Full Customization and Design

Flexibility

Component & Metering

Selection Options

Seismic Tested to Worst Case

Response Spectrum

Indoor and Outdoor

Applications

UL or CSA Listed; Meets ANSI,

IEEE, and NEMA Standards

IEM Product: Unit Substation

Industrial Electric Mfg.

™ (IEM)

Headquartered in Fremont, CA, IEM is the largest independent full-line manufacturer of electrical distribution and power quality equipment in the U.S. For over half a century, IEM has delivered customer-specific solutions to meet the ever changing power requirements of growth industries in North America. At IEM, tradition and technology still drive innovation. An experienced engineering staff and one of the most flexible design and manufacturing systems in the industry set IEM apart from standard product manufacturers.

Tradition. Technology. Innovation.

Corporate Office

Industrial Electric Mfg ™

48205 Warm Springs Blvd

Fremont CA 94539 dir 510.656.1600

Vancouver Office

Industrial Electric Mfg ™

Unit 201 - 27353 58th Crescent

Langley BC V4W 3W7 dir 866.302.9836

Jacksonville Office

Industrial Electric Mfg ™

11902 Central Parkway

Jacksonville FL 32224 dir 904.365.4444

www.iemfg.com

©2013 IEM. Industrial Electric Mfg ™ and the IEM logo design are trademarks of Industrial Electric Mfg. in the U.S. and other countries. All rights reserved. 5.UnitSubstation_DS.v3

IEM Custom

Assemblies

IEM’s unique design and manufacturing capabilities provide for the integration of various components or products into a single assembly specifically suited to a defined purpose. The Custom Assembly process eliminates the need to compromise or combine several products from various manufacturers into a less than ideal solution.

Marina Substations

IEM’s flexible approach to design and manufacturing is ideal for inland and coastal environment applications.

• NEMA 3R Standard

• Temperature Fans for cooling

• Single and three phase models

• Double wall construction

• Ground fault monitoring system

• Up to 1200 Amp Main Circuit Breaker with 16 Single-Phase Branch Circuit

Breakers or 10 Three-Phase Branch Circuit Breakers

• Marine grade aluminum enclosure

Emergency Fused Coordination Panels

• Voltage: 120V – 600V; Ampacity: 250A and 400A

• 65kA at 480V

• UL or CSA Listed

• Coordinated for emergency Loads

• Main breaker, main lugs, subfed breaker – optional

IEM Product: Custom Assemblies

Walk-in Enclosures

Custom designed walk-in enclosures are designed to protect power distribution equipment in outdoor applications.

• Allows any size layout or configuration

• Built and shipped in one unit, no assembly on-site required

• Installed and wired equipment to customer specific application

• Custom paint and sheet metal fabrication per application

Generator Cable Tap Boxes

IEM’s customizable generator cable tap boxes are pass-through devices that can safely connect a stand-by power circuit breaker with a portable generator.

• Rated for 600A applications at 240V or 480V

• Wall mounted/pad mounted

• Free standing

• Lug and cam lock connections available

• Power meters

IEM Difference

Fully rated bus is based on density ratings, not UL heat rise tests, resulting in more bus and lower operating temperatures.

All enclosures are designed for specific application with improved dimensional flexibility and finished using state of the art powder coating system providing an indoor finish that exceeds the 1500 hour salt spray testing requirement for outdoor equipment to

3000 hours.

Component and metering selections are based on value engineering for the application and optimized to meet specifications.

Industrial Electric Mfg.

™ (IEM)

Headquartered in Fremont, CA, IEM is the largest independent full-line manufacturer of electrical distribution and power quality equipment in the U.S. For over half a century, IEM has delivered customer-specific solutions to meet the ever changing power requirements of growth industries in North America. At IEM, tradition and technology still drive innovation. An experienced engineering staff and one of the most flexible design and manufacturing systems in the industry set IEM apart from standard product manufacturers.

Tradition. Technology. Innovation.

Corporate Office

Industrial Electric Mfg ™

48205 Warm Springs Blvd

Fremont CA 94539 dir 510.656.1600

Vancouver Office

Industrial Electric Mfg ™

Unit 201 - 27353 58th Crescent

Langley BC V4W 3W7 dir 866.302.9836

Jacksonville Office

Industrial Electric Mfg ™

11902 Central Parkway

Jacksonville FL 32224 dir 904.365.4444

©2013 IEM. Industrial Electric Mfg ™ and the IEM logo design are trademarks of Industrial Electric Mfg. in the U.S. and other countries. All rights reserved. 7.CustomAssy_DS.v3

www.iemfg.com