Technical Data Sheet
Ceiling Speaker
VXC6/VXC6W
Features
A versatile line-up for clear consistent sound.
• Series offers three different woofer sizes in either black or white.
• Features newly customized transducers for superb music reproduction as well as
crystal clear announcements.
• Designed with optimized bass-reflex tuning to offer a firm, tight low-end.
• Equipped with internal transformers that allow both high and low impedance drive,
which can be selected by simply switching the tap on the baffle.
• Anti-Drop tab allows the speakers to be mounted temporarily in the ceiling for
improved safety and ease of installation.
• A flexible carrying band makes the speakers very portable and allows carrying
multiple speakers at once.
• Comes complete with O-rings and tile rails for safer and smoother installation.
• Overload protection circuit provided to protect speaker components.
• Comes with paintable speaker grilles for flexible design ideas.
• Supported by the dedicated software CISSCA (Commercial Installation Solutions
Speaker Calculator).
General Specifications
Model
Speaker Type
Components
Coverage Angle*1
Nominal Impedance
Power Rating*2
Sensitivity*3 (1W,1m)
Maximum SPL (Calculated, 1m)
Frequency Range*3
Connectors
Transformer Taps
Color (Grille)
Dimensions (Diameter x D)
Weight
Required Ceiling Thickness
Ceiling Cutout Hole Diameter
Included accessories
LF
HF
NOISE
PGM
-10dB
70V
100V
VXC6 / VXC6W
2-way, Coaxial type, Acoustic Suspension
6.5" Cone
0.75" Soft dome
110° conical
8Ω
75W
150W
86dB SPL
111dB SPL
56Hz - 20kHz
1x Euroblock (4P) (Input: + / -, Loop Thru: + / -)
60W (83Ω), 30W (170Ω), 15W (330Ω), 7.5W (670kΩ)
60W (170Ω), 30W (330Ω), 15W (670Ω)
VXC6: Black / VXC6W: White
Ø286 x 205mm (Ø11.3" x 8.1")
4.4kg (9.7lbs)
5 - 35mm
247mm
O-ring, Tile Rail, Cutout Template, Screws, Owner's Manual
*1 500Hz - 4kHz *2 IEC *3 Half space
1
Anti-Drop tab
Technical Data Sheet
Ceiling Speaker
VXC6/VXC6W
Dimensions
Unit: mm
189
ø286
44
O-ring
Ø2
4
30
Ø
320
61
Tile Rail
32
28
608
38
205
ø241
644
2
Technical Data Sheet
Ceiling Speaker
VXC6/VXC6W
On-axis Frequency Response
2π
120
Level [dBSPL, 1W/1m]
110
100
90
80
70
60
50
10
100
1000
10000
100000
Frequency [Hz]
Beamwidth
-3dB
360
-6dB
-9dB
Angle [degree]
270
180
90
0
10
100
1000
10000
100000
Frequency [Hz]
Directivity Index
Directivity Index [dB]
30
20
10
0
10
100
1000
Frequency [Hz]
3
10000
100000
Technical Data Sheet
Ceiling Speaker
VXC6/VXC6W
Polar Plots
63 Hz Octave Band
330
300
270
6
0
-6
-12
-18
-24
-30
63Hz
30
300
90
270
120
210
330
80Hz
60
240
150
300
270
500Hz
30
330
630Hz
60
300
90
270
150
30
60
90
120
150
330
5000Hz
300
270
315Hz
60
90
120
150
2000 Hz Octave Band
800H
800Hz
0
1000Hz
30
330
1250Hz
60
300
90
270
6
0
-6
-12
-18
-24
-30
1600H
1600Hz
0
2000Hz
30
2500Hz
60
90
240
150
6
0
-6
-12
-18
-24
-30
250Hz
30
180
120
210
150
180
8000 Hz Octave Band
4000Hz
200Hz
0
210
120
3150Hz
240
180
6
0
-6
-12
-18
-24
-30
6
0
-6
-12
-18
-24
-30
240
180
0
210
270
150
210
4000 Hz Octave Band
270
300
90
240
180
300
60
1000 Hz Octave Band
120
330
160Hz
120
400H
400Hz
240
6
0
-6
-12
-18
-24
-30
330
180
0
210
125Hz
30
210
500 Hz Octave Band
330
6
0
-6
-12
-18
-24
-30
100Hz
0
240
180
6
0
-6
-12
-18
-24
-30
250 Hz Octave Band
125 Hz Octave Band
50Hz
0
16000 Hz Octave Band
6300Hz
0
8000Hz
30
60
90
240
120
210
150
330
10000Hz
300
270
6
0
-6
-12
-18
-24
-30
4
16000Hz
30
20000Hz
60
90
240
120
210
150
180
180
12500Hz
0
Technical Data Sheet
Ceiling Speaker
VXC6/VXC6W
Architectural and Engineering Specifications
The loudspeaker shall be of in-ceiling design, a 2-way coaxial acoustic suspension type and shall have a
back can. The loudspeaker shall consist of a 6.5” (16cm) cone driver for low frequency and a 0.75” (2cm)
soft dome tweeter for high frequency. The loudspeaker shall be equipped with internal transformers that
allow both high-impedance and lowimpedance drive. The Anti-Drop tab shall be provided for improved safety
and ease of installation that allows the loudspeaker to be mounted temporarily in the ceiling. The flexible
carrying band shall be provided for improved portability. The power rating shall be set by switching a
transformer tap on the baffle as follows: 60W/30W/15W in 100V line; 60W/30W/15W/7.5W in 70V line; and
150W into 8 ohms. The loudspeaker shall be capable of meeting the following performance criteria: The
measured sensitivity shall be 86dB SPL (at 1W, 1m, in half-space); The maximum SPL shall be 111dB SPL
(at 1m); The frequency range shall be 56Hz-20kHz (10dB below rated sensitivity, in halfspace); The nominal
coverage angle shall be 110° polar conical (average 500Hz-4kHz). The loudspeaker shall be provided for an
overload protection circuit to protect network and transducers. The 4-pin Euroblock connector shall be
provided for an input and a loop-thru. The back can shall be constructed of 1mm-thick black-painted steel
and the baffle of HIPS. The grille shall be constructed of 0.6mm-thick steel and the trim ring of ABS, with an
aperture ratio of 51%. The grille shall have the following color variation: black-painted (VXC6) or whitepainted (VXC6W). Overall front face diameter of the loudspeaker shall not exceed 286mm (11.3”), overall
depth from the bottom of the ceiling shall not exceed 204mm (8.1”), and shall weigh no more than 4.4kg
(9.7lbs). The loudspeaker shall have included accessories as follows: The O-rings and the tile rails shall be
included for safer and smoother installation. The loudspeaker shall be equipped with an eyelet for secondary
safety wire usage.
The loudspeaker shall be the Yamaha VXC6 or VXC6W.
Safety and Regulatory Compliance
UL1480 (UEAY) : Commercial and Professional Use (General-Utility). Suitable for use indoor in dry locations.
UL2043
: Suitable for use in air handling spaces.
Memo
*All specifications are subject to change without notice.
*All trademarks and registered trademarks are property of their respective owners.
P.O.BOX 1, Hamamatsu Japan
www.yamahaproaudio.com
5