6
763.422.2661
763.422.2588
NETWORKING
CABLE PATHWAY / BONDING AND GROUNDING
Intro Page
CHAPTER 6
CABLE RUNWAY SYSTEM/
BONDING AND GROUNDING
FEATURED PRODUCTS
176
NETWORKING
LADDER RACK SYSTEMS
From ceiling-mounted to under-floor
floor
configurations, Ladder Rack Systems
ems
route cables through unused space
ace
on the floor, wall or ceiling while
keeping cables accessible for
easy maintenance. A full line of
components and accessories
facilitates a flexible, easy-toinstall cable runway system.
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION
CHAPTER CONTENTS
Intro Page
CABLE PATHWAY AND ACCESSORIES
Ladder Rack System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .178
Ladder Rack Straight Sections (cULus Classified) . . . . . . . . . . . . . . . . .179
Ladder Rack Curved Sections (cULus Classified) . . . . . . . . . . . . . . . . . .179
90-Degree Horizontal E-Bend Section (cULus Classified) . . . . . . . . . . . .179
Butt-Splice Kit (cULus Classified) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179
Adjustable Butt-Splice Kit (cULus Classified) . . . . . . . . . . . . . . . . . . . .179
Junction Splice Kit (cULus Classified) . . . . . . . . . . . . . . . . . . . . . . . . . .180
Adjustable Junction Splice Kit (cULus Classified) . . . . . . . . . . . . . . . . .180
Retaining Post Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180
L-Bracket Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180
Radius Drop Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180
Stringer Radius Drop Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180
Ceiling Support Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181
Foot Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181
Rack-to-Runway Mounting Plate Kit . . . . . . . . . . . . . . . . . . . . . . . . . . .181
Vertical Wall Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181
Triangle Support Bracket Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182
Modular Triangle Support Bracket Kit. . . . . . . . . . . . . . . . . . . . . . . . . . .182
Wall Angle Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182
Corner Support Bracket Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182
End Cap Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183
Runway Termination Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183
Movable Cross Member . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183
Rack-to-Wall Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183
Runway Elevation Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183
Runway Overhead 12-in. Stack Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184
Runway Center Support Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184
Spool Divider Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184
Insulated Ground Jumper Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184
J-Bolt Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185
CABLERACK™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185
QUICK TRAY PRO™
BONDING AND GROUNDING
With a variety of bonding and grounding
accessories available—including
lugs, taps and bar kits—components
meet open frame rack and cabinet
bonding and grounding requirements
for telecommunication room and data
center applications.
EQUIPMENT PROTECTION
Straight Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186
Splice Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188
Splice Washer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188
Splice Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188
Trapeze Hanging Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189
C-Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189
Center Hangers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189
L-Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190
Reinforced Wall Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190
Divider Strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .191
Side-Action Bolt Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .191
Vertical Down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .191
Wall-Termination Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192
Polymer Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192
BONDING AND GROUNDING ACCESSORIES
Bonding and Grounding Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194
Lay-In Lug. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .195
Compression Lugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .195
Heavy-Duty C-Taps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .195
Telecommunications Ground Bar Kits . . . . . . . . . . . . . . . . . . . . . . . . . . .196
Vertical Ground Bar Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196
Horizontal Ground Bar Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196
Insulated Ground Jumper Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .197
Rack Jumper Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .197
PH 763.422.2661 • FAX 763.422.2588 • PENTAIRPROTECT.COM
NETWORKING
177
6
CABLE PATHWAY / BONDING AND GROUNDING CABLE PATHWAY AND ACCESSORIES
CABLE PATHWAY AND ACCESSORIES
LADDER RACK SYSTEM
INDUSTRY STANDARDS
APPLICATION
Painted and Plated Straight Sections:
The Ladder Rack System conveniently routes cables via a modular
pathway through unused space on the floor, wall or ceiling
while keeping cables accessible for easy maintenance. A variety
of straight and curved sections are highly adaptable and can
accommodate virtually any room layout.
UL/cULus Classified for Equipment Grounding and Load; File No.
E236414
Curved Sections and Splice Kits:
UL/cULus Classified for Equipment Grounding; File No. E236414
cULus Bonding & Grounding
• Classified as suitable for an equipment ground conductor
- CSA C22.2 No. 126.1-02 Section 5.2.8 Load Destruction Test
• Two grounding jumper kits required per each splice kit on painted
ladder rack sections
cULus Load Testing
• Load capacity per 10 support lengths is 369.2 lb.; safety factor of
1.5X
- CSA C22.2 No. 126.1-02 Section 5.1 Electrical Continuity Test
6
FEATURES
•
•
•
•
Section cross members welded on 9-in. (229-mm) centers
Accessory adjustable cross members
Butt-splice kits and junction-splice kits
Each model is boxed or bagged
SPECIFICATIONS
•
•
•
Straight and curved sections made of 1-1/2-in. steel
Sections available in 6-, 12-, 18- and 24-in. (152-, 305-, 457- and
610-mm) widths
Steel connecting and mounting hardware
FINISH
Available in three finishes:
• ANSI 61 gray polyester powder paint
• RAL 9005 black polyester powder paint
• Plated
ACCESSORIES
Touch-up Paint
178
NETWORKING
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION
CABLE PATHWAY / BONDING AND GROUNDING CABLE PATHWAY AND ACCESSORIES
LADDER RACK STRAIGHT SECTIONS (CULUS CLASSIFIED)
Supports cable on straight runs.
Made of 1-1/2 in. x 3/8 in. (38 mm x
8 mm) 16 gauge tubular steel with
a painted or plated finish. Nominal
installed length is 10 ft. (3.05 m).
Each section is 9 ft. 11-1/2 in. (3.03
m) long with cross members welded
at 9-in. (229-mm) intervals.
BULLETIN: DCR
Catalog Number
LSS6G
LSS6BLK
LSS6GZ
LSS12G
LSS12BLK
LSS12GZ
LSS18G
LSS18BLK
LSS18GZ
LSS24BLK
AxB in.
6.00 x 120.00
6.00 x 120.00
6.00 x 120.00
12.00 x 120.00
12.00 x 120.00
12.00 x 120.00
18.00 x 120.00
18.00 x 120.00
18.00 x 120.00
24.00 x 120.00
AxB mm
152 x 3048
152 x 3048
152 x 3048
305 x 3048
305 x 3048
305 x 3048
457 x 3048
457 x 3048
457 x 3048
610 x 3048
Finish
Gray
Black
Plated
Gray
Black
Plated
Gray
Black
Plated
Black
W (in.)
6.00
6.00
6.00
12.00
12.00
12.00
18.00
18.00
18.00
24.00
W (mm)
152
152
152
305
305
305
457
457
457
610
LADDER RACK CURVED SECTIONS (CULUS CLASSIFIED)
Provide a vertical change in
direction. They are made of 1-1/2
in. x 3/8 in. (38 mm x 8 mm) tubular
steel with a painted or plated finish.
Cross members are welded on the
inside (inside bends) or outside
(outside bends) of the section.
Connect to straight section with
butt-splice kits. Designed for
category 5e, 6, 6A and fiber optic
cable.
BULLETIN: DCR
Catalog Number
LIB6G
LIB6BLK
LIB6GZ
LIB12G
LIB12BLK
LIB12GZ
LIB18G
LIB18BLK
LIB18GZ
LIB24BLK
LOB6G
LOB6BLK
LOB6GZ
LOB12G
LOB12BLK
LOB12GZ
LOB18G
LOB18BLK
LOB18GZ
LOB24BLK
Finish
Gray
Black
Plated
Gray
Black
Plated
Gray
Black
Plated
Black
Gray
Black
Plated
Gray
Black
Plated
Gray
Black
Plated
Black
Vertical Bend Type
Inside
Inside
Inside
Inside
Inside
Inside
Inside
Inside
Inside
Inside
Outside
Outside
Outside
Outside
Outside
Outside
Outside
Outside
Outside
Outside
W (in.)
6.00
6.00
6.00
12.00
12.00
12.00
18.00
18.00
18.00
24.00
6.00
6.00
6.00
12.00
12.00
12.00
18.00
18.00
18.00
24.00
W (mm)
152
152
152
305
305
305
457
457
457
610
152
152
152
305
305
305
457
457
457
610
90-DEGREE HORIZONTAL E-BEND SECTION (CULUS CLASSIFIED)
Provide a 90-degree horizontal
change in cable runway direction.
Made of 1-1/2 in. x 3/8 in. (38 mm x
8 mm) tubular steel with a painted
or plated finish. Connect to straight
sections with butt-splice kits.
Designed for category 5e, 6, 6A and
fiber optic cable.
Catalog Number
L90HB12G
L90HB12BLK
L90HB12GZ
L90HB18G
L90HB18BLK
L90HB18GZ
L90HB24BLK
Finish
Gray
Black
Plated
Gray
Black
Plated
Black
W (in.)
12.00
12.00
12.00
18.00
18.00
18.00
24.00
W (mm)
305
305
305
457
457
457
610
BULLETIN: DCR
BUTT-SPLICE KIT (CULUS CLASSIFIED)
Joins straight ladder rack sections,
inside and outside bends, and
90-degree horizontal e-bends. Each
kit connects one section to another.
Includes mounting hardware.
Catalog Number
LBSKG
LBSKB
LBSK
Finish
Gray
Black
Plated
Kit Qty.
2
2
2
Catalog Number
LABSKG
LABSKB
LABSK
Finish
Gray
Black
Plated
Kit Qty.
2
2
2
BULLETIN: DCR
ADJUSTABLE BUTT-SPLICE KIT (CULUS CLASSIFIED)
Provides a change in up-and-down
direction of the cable runway. It
can be adjusted to any angle from
0 to 90 degrees. Made of steel with
a painted or plated finish. Each kit
connects one ladder rack section
to another. Includes mounting
hardware.
6
BULLETIN: DCR
EQUIPMENT PROTECTION
PH 763.422.2661 • FAX 763.422.2588 • PENTAIRPROTECT.COM
NETWORKING
179
CABLE PATHWAY / BONDING AND GROUNDING CABLE PATHWAY AND ACCESSORIES
JUNCTION SPLICE KIT (CULUS CLASSIFIED)
Connects two straight ladder rack
sections at a 90-degree angle. Made
of steel with a painted or plated
finish. Each kit connects one section
to another. Includes mounting
hardware.
Catalog Number
LJSKG
LJSKB
LJSK
Finish
Gray
Black
Plated
Kit Qty.
2
2
2
Catalog Number
LAJSKG
LAJSKB
LAJSK
Finish
Gray
Black
Plated
Kit Qty.
2
2
2
Catalog Number
LRP
LRPB
Finish
Plated
Black
Kit Qty.
1
1
Catalog Number
LLBG
LLBB
LLB
Finish
Gray
Black
Plated
Kit Qty.
1
1
1
BULLETIN: DCR
ADJUSTABLE JUNCTION SPLICE KIT (CULUS CLASSIFIED)
Connects two ladder rack sections
at any junction angle. Made of steel
with a painted or plated finish. Each
kit connects one section to another.
Includes mounting hardware.
BULLETIN: DCR
RETAINING POST KIT
Provides extra ladder rack capacity.
Mounts onto rack side stringer.
Post is unthreaded 1/2-in. tube.
Kit components are plated steel.
Includes post cap and mounting
hardware.
BULLETIN: DCR
L-BRACKET KIT
The L-Bracket Kit supports power
or other cables that need to be
separated from the main cable
run. Made of steel with a painted or
plated finish. Mounts onto ladder
rack stringer. Includes mounting
hardware.
BULLETIN: DCR
RADIUS DROP KIT
Mounts over ladder rack cross
member to provide bending radius
when dropping cable. Includes
cable spools to separate cable and
all mounting hardware. Made of
extruded aluminum.
BULLETIN: DCR
6
Catalog Number
LRD6G
LRD6BLK
LRD6GZ
LRD12G
LRD12BLK
LRD12GZ
LRD18G
LRD18BLK
LRD18GZ
LRD24BLK
Finish
Gray
Black
Aluminum
Gray
Black
Aluminum
Gray
Black
Aluminum
Black
Cable
Runway
Width (in.)
6.00
6.00
6.00
12.00
12.00
12.00
18.00
18.00
18.00
24.00
Cable
Runway
Width(mm)
152
152
152
305
305
305
457
457
457
610
Kit
Qty.
1
1
1
1
1
1
1
1
1
1
STRINGER RADIUS DROP KIT
Mounts over ladder rack stringer
to provide bending radius when
dropping cable. Includes cable
spools to separate cable and all
mounting hardware. Made of
extruded aluminum.
Catalog Number
LSRDG
LSRDBLK
LSRDGZ
Finish
Gray
Black
Aluminum
Kit Qty.
1
1
1
BULLETIN: DCR
180
NETWORKING
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION
CABLE PATHWAY / BONDING AND GROUNDING CABLE PATHWAY AND ACCESSORIES
CEILING SUPPORT KIT
Supports ladder rack from ceiling.
Components available separately
or as a kit. Six-foot-long, 5/8-in.
diameter rod is threaded for easy
tension adjustment. Made of plated
steel. Requires surface mounting
hardware (not included).
BULLETIN: DCR
LRWSBK
Catalog Number
LCK
Finish
Plated
LTR
LRWBK
Plated
Plated
LRWBKB
Black
LCBK
Plated
LCBKB
Black
LRWSBK
Plated
LRWSBKB
Black
Description
Kit includes one each:
- LTR Threaded Rod
- 5/8-in. nuts (4)
- LRWBK Rack Runway Bracket
- LCBK Ceiling Bracket
5/8-in. x 6-ft. Threaded Rod
Rack Runway Brackets (10)
5/8-in. nuts (20)
Rack Runway Brackets (10)
5/8-in. nuts (20)
Ceiling Brackets (10)
5/8-in nuts (20)
Ceiling Brackets (10)
5/8-in nuts (20)
Rack-to-Runway Brackets (10)
Slip-On
5/8 in. nuts (2)
Rack-to-Runway Brackets (10)
Slip-On
5/8 in. nuts (2)
Kit
Qty.
1
1
1
1
1
1
1
1
FOOT KIT
Secures ladder rack to floor, ceiling
or wall. Made of steel with a painted
or plated finish. One kit secures
one ladder rack section. Requires
surface mounting hardware (not
included).
Finish
Gray
Black
Plated
Catalog Number
LFKG
LFKB
LFK
Kit Qty.
2
2
2
BULLETIN: DCR
RACK-TO-RUNWAY MOUNTING PLATE KIT
Secures ladder rack to the top of
equipment racks. Made of steel with
a painted or plated finish. The plate
is designed for mounting either
parallel or perpendicular to the
rack. Includes mounting hardware.
BULLETIN: DCR
Catalog Number
LRRMPG
LRRMPBLK
LRRMPGZ
LRRMPG18
LRRMPBLK18
LRRMPGZ18
LRRMPBLK24
Fits Ladder
Width
6, 12
6, 12
6, 12
12, 18
12, 18
12, 18
18, 24
Finish
Gray
Black
Plated
Gray
Black
Plated
Black
Kit Qty.
1
1
1
1
1
1
1
VERTICAL WALL BRACKET
Secures ladder rack section to
wall or other flat surface. Made
of steel with a painted or plated
finish. Requires surface mounting
hardware (not included).
Catalog Number
LVWBG
LVWBB
LVWB
Finish
Gray
Black
Plated
Kit Qty.
2
2
2
BULLETIN: DCR
6
EQUIPMENT PROTECTION
PH 763.422.2661 • FAX 763.422.2588 • PENTAIRPROTECT.COM
NETWORKING
181
CABLE PATHWAY / BONDING AND GROUNDING CABLE PATHWAY AND ACCESSORIES
TRIANGLE SUPPORT BRACKET KIT
Supports ladder rack from wall.
Bracket is made of steel with
painted or plated finish. Brackets
have predrilled mounting holes for
two sizes of ladder rack. Includes
one J-Bolt Kit.
BULLETIN: DCR
Catalog Number
LTSB12G
LTSB12BLK
LTSB12GZ
LTSB18G
LTSB18BLK
LTSB18GZ
LTSB24BLK
A in.
0.00
0.00
0.00
0.00
0.00
0.00
24.00
A mm
610
Finish
Gray
Black
Plated
Gray
Black
Plated
Black
Fits Cable
Runway
6, 12
6, 12
6, 12
12, 18
12, 18
12, 18
12, 18, 24
Kit Qty.
1
1
1
1
1
1
1
MODULAR TRIANGLE SUPPORT BRACKET KIT
Secures and supports ladder rack to
wall. Design features three bracket
support arms that easily attach to
each other with quick-release pins
and fold down to ease assembly.
Each model accomodates two
ladder rack widths. Kit includes one
modular bracket assembly, three
quick-release pins and two J-bolts
with washers and nuts. Bracket
made of painted steel with plated
hardware.
Fits Cable
Runway
6, 12
12, 18
18, 24
Finish
Black
Black
Black
Catalog Number
LMTSB12B
LMTSB18B
LMTSB24B
Kit Qty.
1
1
1
BULLETIN: DCR
WALL ANGLE SUPPORT
Supports ladder rack from wall or
other flat surface. Made of 2-in.
x 2-in. 10 gauge steel angle with
painted or plated finish. Includes
two J-bolts, nuts and screws.
Catalog Number
LWASK6G
Finish
Gray
LWASK6BLK
Black
LWASK6GZ
Plated
LWASK12G
Gray
LWASK12BLK
Black
LWASK12GZ
Plated
LWASK18G
Gray
LWASK18BLK
Black
LWASK18GZ
Plated
LWASK24BLK
Black
BULLETIN: DCR
L
in./mm
8.00
203
8.00
203
8.00
203
14.00
356
14.00
356
14.00
356
20.00
508
20.00
508
20.00
508
26.00
660
R
in./mm
6.00
152
6.00
152
6.00
152
12.00
305
12.00
305
12.00
305
18.00
457
18.00
457
18.00
457
24.00
610
S
in./mm
6.38
162
6.38
162
6.38
162
12.38
314
12.38
314
12.38
314
18.38
467
18.38
467
18.38
467
24.38
619
Kit Qty.
1
1
1
1
1
1
1
1
1
1
CORNER SUPPORT BRACKET KIT
Provides additional support for
90-degree ladder rack junction.
Made of steel with a painted or
plated finish.
Catalog Number
LCSKG
LCSKB
LCSK
Finish
Gray
Black
Plated
Kit Qty.
1
1
1
BULLETIN: DCR
6
182
NETWORKING
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION
CABLE PATHWAY / BONDING AND GROUNDING CABLE PATHWAY AND ACCESSORIES
END CAP KIT
Provides protective covering for
ends of ladder rack. Made of black
vinyl.
Catalog Number
LEC
Kit Qty.
2
BULLETIN: DCR
RUNWAY TERMINATION KIT
Provides a solid termination when
the last section of ladder rack ends
away from a wall. Made of steel with
a painted or plated finish.
BULLETIN: DCR
Fits Cable
Runway
12
12
12
18
18
18
24
Finish
Gray
Black
Plated
Gray
Black
Plated
Black
Catalog Number
LRTK12G
LRTK12B
LRTK12
LRTK18G
LRTK18B
LRTK18
LRTK24B
Kit Qty.
1
1
1
1
1
1
1
MOVABLE CROSS MEMBER
Supports cable at drop locations
between welded cross members.
Made of steel with a painted or
plated finish. For maximum cable
protection, use with radius drop
kit. Includes hardware for secure
mounting to ladder rack stringers.
BULLETIN: DCR
Catalog Number
LMCM12G
LMCM12BLK
LMCM12GZ
LMCM18G
LMCM18BLK
LMCM18GZ
LMCM24BLK
Finish
Gray
Black
Plated
Gray
Black
Plated
Black
W (in.)
12.00
12.00
12.00
18.00
18.00
18.00
24.00
Kit
Qty.
1
1
1
1
1
1
1
W (mm)
305
305
305
457
457
457
610
RACK-TO-WALL KIT
Includes one section of straight
ladder rack and everything needed
to fasten the ladder section to an
open frame rack and to the wall.
Ladder is 54-in. (1372-mm) long by
12-in. (305-mm) wide. All parts have
a black painted finish. Order open
frame rack separately.
Catalog Number
E45RUBKIT
Description
Each Rack-to-Wall Kit includes one:
- LSS12BLK [54-in. (1372-mm) long] Ladder Rack*
- LWASK12BLK Wall Angle Support with j-bolts
- LRRMPBLK Rack-to-Runway Mounting Kit
- LEC End Cap Kit
* Ladder Rack is cULus Classified
BULLETIN: DOFR2
RUNWAY ELEVATION KIT
6WUDLJKW
6HFWLRQ
$
5DFNWR5XQZD\
0RXQWLQJ3ODWH.LW
2UGHU6HSDUDWHO\
2SHQ
)UDPH
5DFN
EQUIPMENT PROTECTION
Elevates ladder rack 3 or 6 in.
(76 or 152 mm) above rack-toladder mounting plate. Use on any
width ladder rack. Kit includes
two brackets and all mounting
hardware. Made of heavy plated
steel.
Catalog Number
LEK3
LEK3B
LEK6
LEK6B
LEK12
LEK12B
A (in.)
3.00
3.00
6.00
6.00
12.00
12.00
A (mm)
76
76
152
152
305
305
Finish
Plated
Black
Plated
Black
Plated
Black
Kit Qty.
1
1
1
1
1
1
6
BULLETIN: DCR
PH 763.422.2661 • FAX 763.422.2588 • PENTAIRPROTECT.COM
NETWORKING
183
CABLE PATHWAY / BONDING AND GROUNDING CABLE PATHWAY AND ACCESSORIES
RUNWAY OVERHEAD 12-IN. STACK KIT
Allows stacking any width of ladder
rack runways 12 in. (305 mm) above
each other. Each kit contains two
complete stacking brackets with all
necessary hardware. Use one kit
at least every 5 ft. (1.5 m). Brackets
and fasteners made of plated steel.
Catalog Number
LST12
LST12B
Finish
Plated
Black
Includes
2 brackets and hardware
2 brackets and hardware
Kit Qty.
1
1
BULLETIN: DCR
RUNWAY CENTER SUPPORT KIT
Threaded rod and bracket supports
center of ladder rack from ceiling.
Kit includes heavy-duty ladder rack
cross member, 5/8-in. threaded rod,
two J-bolts, protected sleeve and
5/8-in. nut. Use one kit at least every
5 ft. (1.5 m). Made of plated steel.
Catalog Number
LCSK6
LCSK12
LCSK18
LCSK24
Finish
Plated
Plated
Plated
Plated
Catalog Number
LCRDSK
Finish
Black plastic spool;
plated steel bracket
Fits Cable
Runway
6
12
18
24
Kit Qty.
1
1
1
1
BULLETIN: DCR
SPOOL DIVIDER KIT
Spools separate cables to improve
cable management and to control
cable-to-cable distances. Spool
and bracket attach to ladder
rack cross member and can be
located anywhere across the
width. Kit includes ten 4-in.-tall
spools, brackets and all necessary
hardware. Spool made of black
plastic and bracket made of plated
steel.
Kit Includes
10 spools,
10 brackets and
mounting hardware
BULLETIN: DCR
INSULATED GROUND JUMPER KIT
Fastens across splices to provide
a secure ground between sections
of ladder rack. Made of #6
AWG x 7 strand wire with green
THW insulation and two-hole
compression lugs mounted on each
end. Includes fasteners.
Catalog Number
DGJ
Conductor Type
#6-7 Stranded
L
in./mm
12.00
305
cULus requires 2 kits per splice on all painted ladder sections
BULLETIN: DBG
6
184
NETWORKING
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION
CABLE PATHWAY / BONDING AND GROUNDING CABLE PATHWAY AND ACCESSORIES
J-BOLT KIT
Connects ladder rack to top of
cabinet or to auxiliary support
channel. Each kit includes two
J-bolts and makes one support
connection. Kit components are
plated steel. Includes mounting
hardware.
Each kit contains:
(2) J-Bolts, 5/16 in.
(2) Nuts, 5/16 in.
(2) Washers, 5/16 in.
(2) Lock Washers, 5/16 in.
(1) Plate
BULLETIN: DCR
J (in.)
3.5
5.00
6.00
7.00
Catalog Number
LJBK
LJBK5
LJBK6
LJBK7
J (mm)
89
127
152
178
Finish
Plated
Plated
Plated
Plated
-
CABLERACK™
%
&
$
CABLERACK™ is used for ladder or basket tray mounting
and securing 19-inch rack equipment for Data centers,
Telecommunication rooms and other locations. The fixed, open
frame rack allows suspending 19-inch rack equipment from Ladder
Rack or Basket Tray. The rack has universal tapped holes per
industry standards to accommodate typical applications. These
open frame racks are ideal for high-density cabling applications
which require above-the-cabinet mounting of equipment, and
provide maximum access to cables and equipment. CABLERACK
is ideal for Data Center applications, expanding equipment to
above-the-cabinet while providing increased equipment and cable
densities.
Standard Product
Catalog Number
E19T6U
AxBxC in./mm
12.44 x 20.16 x 11.50
316 x 512 x 292
Rack Units
6
Cable Bend Radius Accessory
ECMBA4
BULLETIN: DOFRW
6
EQUIPMENT PROTECTION
PH 763.422.2661 • FAX 763.422.2588 • PENTAIRPROTECT.COM
NETWORKING
185
CABLE PATHWAY / BONDING AND GROUNDING QUICK TRAY PRO™
QUICK TRAY PRO™
STRAIGHT SECTION
INDUSTRY STANDARDS
APPLICATION
UL Classified for suitability as equipment ground conductor only.
NFPA 70, National Electrical Code, Article 392: Cable Trays;
provides UL Classification and labels
IEC 61537, Cable Tray Systems and Cable Ladder systems for Cable
Management
NEMA VE 1, Metal Cable Tray Systems, for materials, sizes and
configurations
The QUICK TRAY PRO™ cable tray routes cables through unused
space while keeping them accessible for easy maintenance.
Combine components to configure a system that meets application
requirements.
SPECIFICATIONS
•
•
Made of high-strength 5-mm or higher gauge steel wire
T-weld top wire
FINISH
Pre-galvanized steel or black powder-coated finish.
BULLETIN: DQT
Standard Product
Catalog Number
QTP2X4
QTP2X4BLK
QTP2X6
QTP2X6BLK
QTP2X8
QTP2X8BLK
QTP2X12
QTP2X12BLK
QTP2X16
QTP2X16BLK
QTP2X18
6
QTP2X18BLK
QTP2X20
QTP2X20BLK
QTP2X22
QTP2X22BLK
QTP2X24
186
AxBxC in./mm
2.00 x 4.00 x 120.00
51 x 102 x 3048
2.00 x 4.00 x 120.00
51 x 102 x 3048
2.00 x 6.00 x 120.00
51 x 152 x 3048
2.00 x 6.00 x 120.00
51 x 152 x 3048
2.00 x 8.00 x 120.00
51 x 203 x 3048
2.00 x 8.00 x 120.00
51 x 203 x 3048
2.00 x 12.00 x 120.00
51 x 305 x 3048
2.00 x 12.00 x 120.00
51 x 305 x 3048
2.00 x 16.00 x 120.00
51 x 406 x 3048
2.00 x 16.00 x 120.00
51 x 406 x 3048
2.00 x 18.00 x 120.00
51 x 457 x 3048
2.00 x 18.00 x 120.00
51 x 457 x 3048
2.00 x 20.00 x 120.00
51 x 508 x 3048
2.00 x 20.00 x 120.00
51 x 508 x 3048
2.00 x 22.00 x 120.00
51 x 559 x 3048
2.00 x 22.00 x 120.00
51 x 559 x 3048
2.00 x 24.00 x 120.00
51 x 610 x 3048
NETWORKING
Description
2 x 4-in. Straight Section
Finish
Pre-galvanized
Load per
6-ft. span
lbs./ft.
43
2 x 4-in. Straight Section
Black
43
108
99
2
2 x 6-in. Straight Section
Pre-galvanized
50
163
149
4
2 x 6-in. Straight Section
Black
50
163
149
4
2 x 8-in. Straight Section
Pre-galvanized
52
218
200
4
2 x 8-in. Straight Section
Black
52
218
200
4
2 x 12-in. Straight Section
Pre-galvanized
58
326
298
4
2 x 12-in. Straight Section
Black
58
326
298
4
2 x 16-in. Straight Section
Pre-galvanized
70
439
402
4
2 x 16-in. Straight Section
Black
70
439
402
4
2 x 18-in. Straight Section
Pre-galvanized
70
495
452
4
2 x 18-in. Straight Section
Black
70
495
452
4
2 x 20-in. Straight Section
Pre-galvanized
73
550
503
5
2 x 20-in. Straight Section
Black
73
550
503
5
2 x 22-in. Straight Section
Pre-galvanized
73
600
554
5
2 x 22-in. Straight Section
Black
73
600
554
5
2 x 24-in. Straight Section
Pre-galvanized
75
660
604
5
SUBJECT TO CHANGE WITHOUT NOTICE
Cat6 Fill Rate*
.19-in. dia. cable
108
Cat6A Fill Rate*
.23-in. dia. cable
99
Splice
Quantity
2
EQUIPMENT PROTECTION
CABLE PATHWAY / BONDING AND GROUNDING QUICK TRAY PRO™
Catalog Number
QTP2X24BLK
QTP4X4
QTP4X4BLK
QTP4X6
QTP4X6BLK
QTP4X8
QTP4X8BLK
QTP4X12
QTP4X12BLK
QTP4X16
QTP4X16BLK
QTP4X18
QTP4X18BLK
QTP4X20
QTP4X20BLK
QTP4X22
QTP4X22BLK
QTP4X24
QTP4X24BLK
QTP6X8
QTP6X8BLK
QTP6X12
QTP6X12BLK
QTP6X16
QTP6X16BLK
QTP6X18
QTP6X18BLK
QTP6X20
QTP6X20BLK
QTP6X22
QTP6X22BLK
QTP6X24
QTP6X24BLK
AxBxC in./mm
2.00 x 24.00 x 120.00
51 x 610 x 3048
4.00 x 4.00 x 120.00
102 x 102 x 3048
4.00 x 4.00 x 120.00
102 x 102 x 3048
4.00 x 6.00 x 120.00
102 x 152 x 3048
4.00 x 6.00 x 120.00
102 x 152 x 3048
4.00 x 8.00 x 120.00
102 x 203 x 3048
4.00 x 8.00 x 120.00
102 x 203 x 3048
4.00 x 12.00 x 120.00
102 x 305 x 3048
4.00 x 12.00 x 120.00
102 x 305 x 3048
4.00 x 16.00 x 120.00
102 x 406 x 3048
4.00 x 16.00 x 120.00
102 x 406 x 3048
4.00 x 18.00 x 120.00
102 x 457 x 3048
4.00 x 18.00 x 120.00
102 x 457 x 3048
4.00 x 20.00 x 120.00
102 x 508 x 3048
4.00 x 20.00 x 120.00
102 x 508 x 3048
4.00 x 22.00 x 120.00
102 x 559 x 3048
4.00 x 22.00 x 120.00
102 x 559 x 3048
4.00 x 24.00 x 120.00
102 x 610 x 3048
4.00 x 24.00 x 120.00
102 x 610 x 3048
6.00 x 8.00 x 120.00
152 x 203 x 3048
6.00 x 8.00 x 120.00
152 x 203 x 3048
6.00 x 12.00 x 120.00
152 x 305 x 3048
6.00 x 12.00 x 120.00
152 x 305 x 3048
6.00 x 16.00 x 120.00
152 x 406 x 3048
6.00 x 16.00 x 120.00
152 x 406 x 3048
6.00 x 18.00 x 120.00
152 x 457 x 3048
6.00 x 18.00 x 120.00
152 x 457 x 3048
6.00 x 20.00 x 120.00
152 x 508 x 3048
6.00 x 20.00 x 120.00
152 x 508 x 3048
6.00 x 22.00 x 120.00
152 x 559 x 3048
6.00 x 22.00 x 120.00
152 x 559 x 3048
6.00 x 24.00 x 120.00
152 x 610 x 3048
6.00 x 24.00 x 120.00
152 x 610 x 3048
Description
2 x 24-in. Straight Section
Finish
Black
Load per
6-ft. span
lbs./ft.
75
4 x 4-in. Straight Section
Pre-galvanized
45
205
188
4
4 x 4-in. Straight Section
Black
45
205
188
4
4 x 6-in. Straight Section
Pre-galvanized
49
310
285
5
4 x 6-in. Straight Section
Black
49
310
285
5
4 x 8-in. Straight Section
Pre-galvanized
78
416
380
6
4 x 8-in. Straight Section
Black
78
416
380
6
4 x 12-in. Straight Section
Pre-galvanized
78
621
568
6
4 x 12-in. Straight Section
Black
78
621
568
6
4 x 16-in. Straight Section
Pre-galvanized
108
837
765
7
4 x 16-in. Straight Section
Black
108
837
765
7
4 x 18-in. Straight Section
Pre-galvanized
116
942
862
7
4 x 18-in. Straight Section
Black
116
942
862
7
4 x 20-in. Straight Section
Pre-galvanized
116
1047
958
7
4 x 20-in. Straight Section
Black
116
1047
958
7
4 x 22-in. Straight Section
Pre-galvanized
116
1152
1054
8
4 x 22-in. Straight Section
Black
116
1152
1054
8
4 x 24-in. Straight Section
Pre-galvanized
116
1257
1150
8
4 x 24-in. Straight Section
Black
116
1257
1150
8
6 x 8-in. Straight Section
Pre-galvanized
116
623
570
6
6 x 8-in. Straight Section
Black
116
623
570
6
6 x 12-in. Straight Section
Pre-galvanized
123
931
852
6
6 x 12-in. Straight Section
Black
123
931
852
6
6 x 16-in. Straight Section
Pre-galvanized
123
1255
1148
7
6 x 16-in. Straight Section
Black
123
1255
1148
7
6 x 18-in. Straight Section
Pre-galvanized
127
1413
1292
7
6 x 18-in. Straight Section
Black
127
1413
1292
7
6 x 20-in. Straight Section
Pre-galvanized
127
1571
1437
7
6 x 20-in. Straight Section
Black
127
1571
1437
7
6 x 22-in. Straight Section
Pre-galvanized
127
1728
1580
8
6 x 22-in. Straight Section
Black
127
1728
1580
8
6 x 24-in. Straight Section
Pre-galvanized
150
1886
1726
8
6 x 24-in. Straight Section
Black
150
1886
1726
8
Cat6 Fill Rate*
.19-in. dia. cable
660
Cat6A Fill Rate*
.23-in. dia. cable
604
Splice
Quantity
5
6
* Based on 50% fill rate.
EQUIPMENT PROTECTION
PH 763.422.2661 • FAX 763.422.2588 • PENTAIRPROTECT.COM
NETWORKING
187
CABLE PATHWAY / BONDING AND GROUNDING QUICK TRAY PRO™
SPLICE KIT
Splice Kits are used for bolting
turns, bends and tees; connecting
QUICK TRAY PRO™ sections; and
fastening splice bars. Kit includes
three-piece staked bolt, washer and
nut.
AxBxC in./mm
2.00 x 4.00 x 2.00
51 x 102 x 51
2.00 x 4.00 x 2.00
51 x 102 x 51
Catalog Number
QTPBNWK
QTPBNWKBLK
Description
Splice Kit (Zinc)
Pkg. Qty.
50
Splice Kit (Black)
50
BULLETIN: DQT
SPLICE WASHER
QUICK TRAY PRO Splice Washers
are used with QTPBNWK/
QTPBNWKBLK Splice Kits for
bolting turns, bends, and tees;
connecting tray sections; and
fastening splice bars.
Catalog Number
QTPSSW3
QTPSSW3BLK
AxBxC in./mm
4.00 x 4.00 x 8.00
102 x 102 x 203
4.00 x 4.00 x 8.00
102 x 102 x 203
Description
Splice Washer
Finish
Pre-galvanized
Pkg. Qty.
50
Splice Washer
Black
50
BULLETIN: DQT
SPLICE BARS
QUICK TRAY PRO Splice Bars provide extra support and stability
to tray sides when connecting tray sections with splice washers.
Universal bars can be cut to fit with bolt cutters and bent for use
in tees and elbows. Made of plated steel. Requires QTPSSW3/
QTPSSW3BLK Splice Washers and QTBNWK/QTPBNWKBLK Splice
Kits to fasten to side of tray.
BULLETIN: DQT
Catalog Number
QTPUS10
QTPUS10BLK
QTP90TKIT
QTP90TKITBLK
AxBxC in./mm
4.00 x 13.00 x 4.00
102 x 330 x 102
4.00 x 13.00 x 4.00
102 x 330 x 102
1.00 x 5.00 x 5.00
25 x 127 x 127
1.00 x 5.00 x 5.00
25 x 127 x 127
Description
Splice Bar, 10 in. Universal (Zinc)
Pkg. Qty.
50
Splice Bar, 10 in. Universal (Black)
50
Includes: (2) 90º bends; (8) washers, (8) nuts, (8) bolts (Zinc)
1
Includes: (2) 90º bends; (8) washers, (8) nuts, (8) bolts (Black)
1
6
188
NETWORKING
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION
CABLE PATHWAY / BONDING AND GROUNDING QUICK TRAY PRO™
TRAPEZE HANGING CLIP
For trapeze hung QUICK TRAY PRO™ installations. Use with
1/4- or 3/8-in. threaded rod; obtain locally. Poly grommet retains
tray in slot-unsnaps to detach one side of tray for loading cables.
Corrosion-resistant pre-galvanized finish.
BULLETIN: DQT
Catalog Number
QTPTH
QTPTHBLK
AxBxC in./mm
3.00 x 6.00 x 14.00
76 x 152 x 356
3.00 x 6.00 x 14.00
76 x 152 x 356
Description
Trapeze Hanging Clips, Pre-galvanized
Pkg. Qty.
50
Trapeze Hanging Clips, Black
50
C-BRACKET
For QUICK TRAY PRO installations under ceiling or overhangs. Use
with tray widths up to 12 in. (305 mm). To secure tray to bracket, use
one QTPSSW3/QTPSSW3BLK Splice Washer and one QTPBNWK/
QTPBNWKBLK Splice Kit on sizes up to 8 in. (203 mm); use two
on 12-in. (305-mm) trays. Can be stacked for multi-level tray
installations. Corrosion resistant plated finish.
BULLETIN: DQT
Catalog Number
QTPCB4
QTPCB4BLK
QTPCB8
QTPCB8BLK
QTPCB12
QTPCB12BLK
AxBxC in./mm
8.00 x 1.00 x 4.00
203 x 25 x 102
8.00 x 1.00 x 4.00
203 x 25 x 102
8.00 x 1.00 x 8.00
203 x 25 x 203
8.00 x 1.00 x 8.00
203 x 25 x 203
8.00 x 1.00 x 12.00
203 x 25 x 305
8.00 x 1.00 x 12.00
203 x 25 x 305
Description
C-Bracket
Finish
Pre-galvanized
C-Bracket
Black
C-Bracket
Pre-galvanized
C-Bracket
Black
C-Bracket
Pre-galvanized
C-Bracket
Black
Tray Width
in./mm
4
102
4
102
8
203
8
203
12
305
12
305
CENTER HANGERS
Use with up to 1/2-in. threaded rod (obtain locally). Only one rod
needed to suspend tray. Snap-on attachment holds QUICK TRAY
PRO cable tray secure without nuts and bolts. For use with 4- to
24-in. (102- to 610-mm) tray widths. Can be used for multiple-level
installations; 1/2-in. threaded rod recommended. Corrosionresistant plated finish.
BULLETIN: DQT
Catalog Number
QTPCH4
QTPCH4BLK
QTPCH12
QTPCH12BLK
QTPCH24
QTPCH24BLK
EQUIPMENT PROTECTION
AxBxC in./mm
7.50 x 4.00 x 1.00
191 x 102 x 25
7.50 x 4.00 x 1.00
191 x 102 x 25
7.50 x 12.00 x 1.00
191 x 305 x 25
7.50 x 12.00 x 1.00
191 x 305 x 25
7.50 x 24.00 x 1.00
191 x 610 x 25
7.50 x 24.00 x 1.00
191 x 610 x 25
Description
Center Hanger
Finish
Pre-galvanized
Center Hanger
Black
Center Hanger
Pre-galvanized
Center Hanger
Black
Center Hanger
Pre-galvanized
Center Hanger
Black
PH 763.422.2661 • FAX 763.422.2588 • PENTAIRPROTECT.COM
Tray Width
in./mm
4
102
4
102
12
305
12
305
24
610
24
610
6
NETWORKING
189
CABLE PATHWAY / BONDING AND GROUNDING QUICK TRAY PRO™
L-BRACKETS
L-Brackets mount directly to wall for overhead mounting.
Corrosion-resistant plated finish. Fasten QUICK TRAY PRO™ to
bracket with one QTPSSW3/QTPSSW3BLK Splice Washer and one
QTPBNWK/QTPBNWKBLK Splice Kit on sizes up to 8 in. (203 mm);
use two on 12-in. (305-mm) trays.
BULLETIN: DQT
Catalog Number
QTPLB4
QTPLB4BLK
QTPLB8
QTPLB8BLK
QTPLB12
QTPLB12BLK
AxBxC in./mm
6.00 x 1.00 x 4.00
152 x 25 x 102
6.00 x 1.00 x 4.00
152 x 25 x 102
6.00 x 1.00 x 8.00
152 x 25 x 203
6.00 x 1.00 x 8.00
152 x 25 x 203
6.00 x 1.00 x 12.00
152 x 25 x 305
6.00 x 1.00 x 12.00
152 x 25 x 305
Description
4-in. L-Bracket
Finish
Pre-galvanized
4-in. L-Bracket
Black
8-in. L-Bracket
Pre-galvanized
8-in. L-Bracket
Black
12-in. L-Bracket
Pre-galvanized
12-in. L-Bracket
Black
REINFORCED WALL BRACKET
For heavy-duty QUICK TRAY PRO applications. Mounts on 1-5/8-in.
wide metal channel. To secure tray to bracket, use one QTPSSW3/
QTPSSW3BLK Splice Washer and one QTPBNWK/QTPBNWKBLK
Splice Kit on sizes up to 8 in. (203 mm); use two on 12-in. (305-mm)
and wider trays. Made of plated steel for corrosion resistance.
BULLETIN: DQT
Catalog Number
QTPRWB4
QTPRWB4BLK
QTPRWB6
QTPRWB6BLK
QTPRWB8
QTPRWB8BLK
QTPRWB12
QTPRWB12BLK
QTPRWB16
QTPRWB16BLK
QTPRWB18
QTPRWB18BLK
6
QTPRWB20
QTPRWB20BLK
QTPRWB24
QTPRWB24BLK
190
NETWORKING
AxBxC in./mm
3.00 x 1.00 x 4.00
76 x 25 x 102
3.00 x 1.00 x 4.00
76 x 25 x 102
3.00 x 1.00 x 6.00
76 x 25 x 152
3.00 x 1.00 x 6.00
76 x 25 x 152
4.00 x 1.00 x 8.00
102 x 25 x 203
4.00 x 1.00 x 8.00
102 x 25 x 203
6.00 x 1.00 x 12.00
152 x 25 x 305
6.00 x 1.00 x 12.00
152 x 25 x 305
9.00 x 1.00 x 16.00
229 x 25 x 406
9.00 x 1.00 x 16.00
229 x 25 x 406
3.00 x 8.00 x 3.00
76 x 203 x 76
3.00 x 8.00 x 3.00
76 x 203 x 76
9.00 x 1.00 x 20.00
229 x 25 x 508
9.00 x 1.00 x 20.00
229 x 25 x 508
9.00 x 1.00 x 24.00
229 x 25 x 610
9.00 x 1.00 x 24.00
229 x 25 x 610
Description
Reinforced Wall Bracket
Finish
Pre-galvanized
Reinforced Wall Bracket
Black
Reinforced Wall Bracket
Pre-galvanized
Reinforced Wall Bracket
Black
Reinforced Wall Bracket
Pre-galvanized
Reinforced Wall Bracket
Black
Reinforced Wall Bracket
Pre-galvanized
Reinforced Wall Bracket
Black
Reinforced Wall Bracket
Pre-galvanized
Reinforced Wall Bracket
Black
Reinforced Wall Bracket
Pre-galvanized
Reinforced Wall Bracket
Black
Reinforced Wall Bracket
Pre-galvanized
Reinforced Wall Bracket
Black
Reinforced Wall Bracket
Pre-galvanized
Reinforced Wall Bracket
Black
SUBJECT TO CHANGE WITHOUT NOTICE
Width
in./mm
4
102
4
102
6
152
6
152
8
203
8
203
12
305
12
305
16
406
16
406
18
457
18
457
20
508
20
508
24
610
24
610
EQUIPMENT PROTECTION
CABLE PATHWAY / BONDING AND GROUNDING QUICK TRAY PRO™
DIVIDER STRIP
For wire separation within a single QUICK TRAY PRO™ cable
tray. 5-ft. (1.5-m) long strips are available in 2-, 4- and and 6-in.
(51-, 102- and 152-mm) heights. To secure divider strips to tray,
use QTPSSW3/QTPSSW3BLK Splice Washer and QTPBNWK/
QTPBNWKBLK Splice Kit for each strip.
BULLETIN: DQT
Catalog Number
QTPDS2
QTPDS2BLK
QTPDS4
QTPDS4BLK
QTPDS6
QTPDS6BLK
AxBxC in./mm
2.00 x 1.00 x 60.00
51 x 25 x 1524
2.00 x 1.00 x 60.00
51 x 25 x 1524
4.00 x 1.00 x 60.00
102 x 25 x 1524
4.00 x 1.00 x 60.00
102 x 25 x 1524
6.00 x 1.00 x 60.00
152 x 25 x 1524
6.00 x 1.00 x 60.00
152 x 25 x 1524
Descripton
Divider Strip
Finish
Pre-galvanized
Divider Strip
Black
Divider Strip
Pre-galvanized
Divider Strip
Black
Divider Strip
Pre-galvanized
Divider Strip
Black
Tray Height
in./mm
2
51
2
51
4
102
4
102
6
152
6
152
SIDE-ACTION BOLT CUTTER
The QUICK TRAY PRO Side-Action
Bolt Cutter insures a flush cut and
helps create a protective coating for
the new cut.
Catalog Number
QTPBC
AxBxC in./mm
12.00 x 1.00 x 0.50
305 x 25 x 13
Description
Side Action Bolt Cutter
BULLETIN: DQT
VERTICAL DOWN
The QUICK TRAY PRO Vertical Down protects cables when exiting
and entering tray. Built-in hold down method for side mount.
Attached with 1/4 in. hardware for center mount.
BULLETIN: DQT
Catalog Number
QTPVD
QTPVDBLK
AxBxC in./mm
1.00 x 8.00 x 11.00
25 x 203 x 279
1.00 x 8.00 x 11.00
25 x 203 x 279
Description
Vertical Down
Finish
Pre-galvanized
Vertical Down
Black
6
EQUIPMENT PROTECTION
PH 763.422.2661 • FAX 763.422.2588 • PENTAIRPROTECT.COM
NETWORKING
191
CABLE PATHWAY / BONDING AND GROUNDING QUICK TRAY PRO™
WALL-TERMINATION BRACKET
Fastens the end of QUICK TRAY
PRO™ cable tray to a wall. Attach to
tray with QTPSSW3/QTPSSW3BLK
Splice Washers and QTPBNWK/
QTPBNWKBLK Splice Kits.
Catalog Number
QTPWTB
QTPWTBBLK
AxBxC in./mm
3.00 x 12.00 x 3.00
76 x 305 x 76
3.00 x 12.00 x 3.00
76 x 305 x 76
Description
Wall-Termination Bracket, 12 in. (305 mm)
Finish
Pre-galvanized
Wall-Termination Bracket, 12 in. (305 mm)
Black
BULLETIN: DQT
POLYMER INSERT
Polymer inserts provide continuous support for the cables when
used as a tray liner. This flame retardant polymer material is
prescored at the factory to fit in all standard width QUICK TRAY PRO
cable trays. Easy to cut and sold in 40-foot (12 meters) roll.
BULLETIN: DQT
Catalog Number
QTP4INST
Description
4 x 40-foot roll (102 x 12,197-mm) Polymer Insert
QTP6INST
6 x 40-foot roll (152 x 12,197-mm) Polymer Insert
QTP8INST
8 x 40-foot roll (203 x 12,197-mm) Polymer Insert
QTP12INST
12 x 40-foot roll (305 x 12,197-mm) Polymer Insert
QTP16INST
16 x 40-foot roll (406 x 12,197-mm) Polymer Insert
QTP18INST
18 x 40-foot roll (457 x 12,197-mm) Polymer Insert
QTP20INST
20 x 40-foot roll (508 x 12,197-mm) Polymer Insert
QTP24INST
24 x 40-foot roll (610 x 12,197-mm) Polymer Insert
Tray Width
in./mm
4
102
6
152
8
203
12
305
16
406
18
457
20
508
24
610
6
192
NETWORKING
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION
CABLE PATHWAY / BONDING AND GROUNDING QUICK TRAY PRO™
Notes
6
EQUIPMENT PROTECTION
PH 763.422.2661 • FAX 763.422.2588 • PENTAIRPROTECT.COM
NETWORKING
193
CABLE PATHWAY / BONDING AND GROUNDING BONDING AND GROUNDING ACCESSORIES
BONDING AND GROUNDING ACCESSORIES
BONDING AND GROUNDING OVERVIEW
INDUSTRY STANDARDS
FEATURES
Ground Bar Kits:
•
UL 467 Listed
cUL Listed per CSA C22.2 No. 41
File No. E319377
•
•
Components specially designed to efficiently facilitate reliable
connections
Enable system to meet equipment manufacturer grounding
requirements
Components fit EIA 310-D-rated open frame racks
APPLICATION
6
These components meet open frame rack and cabinet bonding and
grounding requirements for telecommunication room and data
center applications.
194
NETWORKING
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION
CABLE PATHWAY / BONDING AND GROUNDING BONDING AND GROUNDING ACCESSORIES
Dual-rated, UL486B listed lay-in lug bonds end of cable securely to
rack. Made of electroplated 6061-T6 aluminum. Requires 3/16-in.
hex key (not included).
LAY-IN LUG
BULLETIN: DBG
Catalog Number
DGLG
For Cable
Size Range
#14 AWG to 2/0
Catalog Number
DGCL61
DGCL62
DGCL21
DGCL22
DGCL201
DGCL402
Cable
Size
(#)
6
6
2
2
2/0
4/0
COMPRESSION LUGS
Size (in.)
1.75 x 1.50
On-Center
Dimension
Between
Holes
.625
1.00
.625
1.00
1.00
1.00
Size (mm)
44 x 38
Required
Screw
Size
1/4
3/8
1/4
3/8
3/8
3/8
Color
Code
Blue
Blue
Brown
Brown
Black
Purple
Pkg. Qty.
10
Pkg.
Qty.
10
10
10
10
10
10
Compression lugs terminate copper or tinned-copper conductors
for connection to busbars, cabinets, racks, and cable runway.
Color-coded by conductor size. Made of electroplated, tinned
copper. Require two screws (not included).
BULLETIN: DBG
HEAVY-DUTY C-TAPS
C-Taps splice two stranded or solid connectors together. Made of
copper. Require a crimping tool (not included) to correctly tighten
C-Taps around connectors.
BULLETIN: DBG
Catalog Number
DGT1
DGT2
Conductor Run
#2 stranded or solid
#2 stranded or solid
Conductor Tap
#4 stranded, #8 solid
#2 stranded or solid
Pkg. Qty.
10
10
6
EQUIPMENT PROTECTION
PH 763.422.2661 • FAX 763.422.2588 • PENTAIRPROTECT.COM
NETWORKING
195
CABLE PATHWAY / BONDING AND GROUNDING BONDING AND GROUNDING ACCESSORIES
TELECOMMUNICATIONS GROUND BAR KITS
2-inch Wide Bar
4-inch Wide Bar
Provide a convenient central location for connecting grounds
from telecommunications equipment, computers, and other data
center equipment. Made of copper. Kits include ground bar with
two mounting brackets, an assortment of connectors, and a tube of
antioxidant.
BULLETIN: DBG
Standard Product
Catalog Number
DGTB212
DGTB216
DGTB412
DGTB420
Bar Size
in./mm
2.00 x 12.00 x .25
51 x 305 x 6
2.00 x 16.00 x .25
51 x 406 x 6
4.00 x 12.00 x .25
102 x 305 x 6
4.00 x 20.00 x .25
102 x 508 x 6
No. of
5/16-in.
Hole Sets
6
No. of
7/16-in.
Hole Sets
3
8
3
12
6
24
6
Compression Lugs Included with Ground Bar Kits
Catalog Number
DGTB212
DGTB216
DGTB412
DGTB420
VERTICAL GROUND BAR KITS
#6 Wire
Size
(DGCL61)
6 lugs
6 lugs
6 lugs
6 lugs
#2 Wire
Size
(DGCL22)
3 lugs
3 lugs
3 lugs
3 lugs
#2/0
Wire
Size
(DGCL201)
1 lug
1 lug
1 lug
1 lug
#4/0
Wire
Size
(DGCL402)
0
0
1 lug
1 lug
Mount vertically on rack, providing a convenient place to connect
equipment grounds. Made of electrolytic tough-pitch 110 copper
alloy. Kits include ground bar with compression lug for #2 wire,
connection hardware, and mounting hardware.
BULLETIN: DBG
Catalog Number
DG36
DG72
HORIZONTAL GROUND BAR KITS
Bar Size (in.)
36.00 x .625 x .25
72.00 x .625 x .25
Bar Size (mm)
914 x 16 x 6
1829 x 16 x 6
Mount horizontally on rack, providing a convenient place to connect
equipment grounds. Made of electrolytic tough-pitch 110 copper
alloy. Kits include ground bar with mounting hardware, eight #6-32
x 14 machine screws, and eight #6 ring terminals.
BULLETIN: DBG
Catalog Number
DG19
DG23
Bar Size (in.)
1.00 x 19.25 x .25
1.00 x 23.25 x .25
Bar Size (mm)
25 x 489 x 6
25 x 591 x 6
6
196
NETWORKING
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION
CABLE PATHWAY / BONDING AND GROUNDING BONDING AND GROUNDING ACCESSORIES
INSULATED GROUND JUMPER KIT
Fastens across splices to provide a secure ground between sections
of ladder rack. Made of #6 AWG x 7 strand wire with green THW
insulation and two-hole compression lugs mounted on each end.
Includes fasteners.
BULLETIN: DBG
Catalog Number
DGJ
Conductor Type
#6-7 Stranded
L (in.)
12.00
L (mm)
305
cULus requires 2 kits per splice on all painted ladder sections
RACK JUMPER KIT
Grounds rack or cabinet to common bonding network under floor
or overhead. Made of #6 AWG x 7 strand wire with green THW
insulation and two-hole compression lug mounted on one end.
Includes fasteners.
BULLETIN: DBG
Catalog Number
DGRJ
Conductor Type
#6-7 stranded
Length (ft.)
9
Length (m)
2.7
6
EQUIPMENT PROTECTION
PH 763.422.2661 • FAX 763.422.2588 • PENTAIRPROTECT.COM
NETWORKING
197