Model No. Video Intercom System with Wireless Monitor (2.4 GHz) VL-SW251 * Only for distribution in Middle East, Asia & Oceania System Configuration Wiring Schematic Diagram Expanded system example Up to + Video Intercom System VL-SW251 + Door Station VL-V522L 2 + Wireless Sub Monitor VL-W605 DOOR STATION 1 Up to 3 DOOR STATION 2 Rear view Rear view VL-F AN1 IN USE (LED) M STATU S GRA PRO Repeater for Wireless Monitor VL-FAN1 (Non polar) (Non polar) PBX** Bedroom Room 1 Room 2 Rear view MAIN MONITOR Living Room Kitchen Den TERMINAL BOX (4‐conductor wiring) PBX* * VL-SW251AZ, VL-SW251BX models only < 2 Wire > (Non polar) (Non polar) (Non polar) Electric lock Electric lock Power plug (100 - 240 V AC) Repeater ELECTRIC LOCK * VL-SW251AZ, VL-SW251BX models only Communication and layout example You can set up to 2 optional repeaters. ・One repeater can relay radio waves between the main monitor and multiple sub monitors (up to 4). you set a repeater between the main monitor and sub ・Ifmonitors located at a distance, the repeater expands the radio ・Wire (between the main monitor and the door station): ・ ・ wave range and may improve image distortion and/or sound cutting in and out. Signal range differs depending on factors such as the structure of rooms or the types of walls used. ELECTRIC LOCK Wire type and length Type Distance General cable CAT-3 Maximum 50 m General cable 22 AWG (ø 0.65) Maximum 100 m Wire (between the main monitor and PBX): Type: General cable CAT-3 or 22 AWG (ø 0.65) Distance: Maximum 100 m Loop resistance 10 Ω or lower