REACH COAXIALS SAT 100/AL C 75Ω REACH R oHS COMPLIANT COMPLIANCE Marking: C SPECIALCAVI BALDASSARI SAT 100/AL 75 OHM <year> <lot> <meters> MADE IN ITALY STANDARD CEI 46-1 CEI EN 50117 TEMPERATURE Minimum working temperature: -10°C Maximum working temperature: +70°C MANUFACTURING CHARACTERISTICS Inner conductor: Bare copper Ø= 1.00mm Dielectric: Polyethylene foam - Gas injected Ø= 4.40mm Screen: 1st screen : Aluminum/Polyester/Aluminum tape 100% 2nd screen : Tinned copper braid 40% Outer sheath: PVC compound Approx. outer Ø= 6.10mm Colours: Outer sheath colour: White ON REQUEST • Polyethylene (PE) outer sheath for outdoor applications • LSZH outer sheath LAYING CONDITIONS Minimum installation temperature 0°C Laying operation bending radius d10 Fixed laying In duct or cable tray APPLICATIONS Coaxial cable with characteristic impedance of 75 Ohm for receiving television signals, both digital and satellite. The foamed polyethylene gas-injected dielectric in addition to offering low attenuations, ensures a better stability of the values of the same, keeping them constant over time, even in critical conditions such as, for example, high humidity or thermal changes. Suitable to be used as backbone on small installations of reception of TV signals. Not suitable for underground laying, even if protected. 1 | www.specialcavibaldassari.it | REACH COAXIALS National Cables SAT 100/AL 75Ω PART NUMBER SCREENING EFFICIENCY WEIGHT¹ [n°] [%] [Kg/km] SAT100AL > 80 40 IMPEDANCE CAPACITANCE VELOCITY RATIO [Ω] [pF/m] [%] 75 ± 3 52 ± 2 85 FREQUENCY ATTENUATION [MHz] [dB/100m] 100 450 800 1000 1750 2050 2250 2500 6.8 13.0 18.5 21.3 27.8 31.0 32.2 33.0 Unless otherwise specified, the values for weight and diameter are indicative. Capacitance, velocity ratio, attenuation: nominal values at 20°C Note: other values, if avaible and released for publication, are avaible on request. 1 | www.specialcavibaldassari.it | 2