COSEL
TUNS700 SERIES
700 Watt Power Supply
Measures: 4.62 x 2.42 x 0.50”
Ordering information
AC-DC Power Supplies Power Module type
TUNS700F
TUN
1
S
2
700
3
F
4
48
5
-O
6
1Series name
2Single output
3Output wattage
4Universal Input
5Output voltage
6Optional
T : with Mounting hole
(f3.4 thru)
Y1: Outputvoltage adjustment
range ±20% (Only 48V)
R1: with Remote ON/OFF
R2: with Remote ON/OFF
(Low standby power)
P : Parallel operation
R
*Avoid short circuit between +BC/R and -BC. It may cause the failure of inside components.
*Keep TRM open, if output voltage adjustment is not necessary.
*If remote sensing is not necessary, connect between +Vout & +S and between -Vout & -S.
MODEL
MAX OUTPUT WATTAGE[W]
DC OUTPUT
TUNS700F12
700.8
12V 58.4A
TUNS700F28
700.0
28V 25A
TUNS700F48
700.8
48V 14.6A
SPECIFICATIONS
MODEL
VOLTAGE[V]
TUNS
TUNS700F12
TUNS700F28
AC85 - 264 1f
ACIN 100V 8.6typ (Io=100%)
CURRENT[A]
ACIN 200V 4.1typ (Io=100%)
FREQUENCY[Hz]
50/60 (47 - 63)
ACIN 100V 83typ
86typ
EFFICIENCY[%]
INPUT
ACIN 200V 86typ
89typ
POWER FACTOR
ACIN 100V 0.96typ
(Io=100%)
ACIN 200V 0.93typ
INRUSH CURRENT
Limited by external resistance
0.75max (ACIN 240V 60Hz, Io=100%, According to IEC60950-1)
LEAKAGE CURRENT[mA]
VOLTAGE[V]
12
28
58.4
25
CURRENT[A]
LINE REGULATION[mV]
24max
56max
LOAD REGULATION[mV]
24max
56max
*1
120max
180max
0 to +100C
RIPPLE[mVp-p]
200max
-40 to 0C *1 150max
200max
0 to +100C*1 150max
OUTPUT
RIPPLE NOISE[mVp-p]
300max
-40 to 0C *1 200max
280max
0 to +65C 120max
TEMPERATURE REGULATION[mV]
560max
-40 to +100C 240max
*2
40max
90max
DRIFT[mV]
OUTPUT VOLTAGE ADJUSTMENT
Fixed (TRM pin open), adjustable by external resistor or external signal
RANGE[V]
9.60 - 14.40
22.40 - 33.60
OUTPUT VOLTAGE SETTING[V] 11.91 - 12.29
27.56 - 28.44
OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically
PROTECTION OVERVOLTAGE PROTECTION[V] 15.00 - 16.80
35.00 - 39.20
CIRCUIT AND REMOTE SENSING
Provided
OTHERS
REMOTE ON/OFF
Optional (External power supply is required)
TUNS700F48
MODEL
MAX OUTPUT WATTAGE[W]
DC OUTPUT
TUNS700F48-P
700.8
48V 14.6A
TUNS700F12-P
700.8
12V 58.4A
TUNS700F28-P
700.0
28V 25A
87typ
90typ
48
14.6
96max
96max
250max
300max
300max
450max
480max
960max
180max
38.40 - 52.80 (-Y1 Option : 38.4 - 57.6)
47.24 - 48.76
55.20 - 64.80 (-Y1 Option : 60.0 - 67.2)
SPECIFICATIONS
MODEL
VOLTAGE[V]
TUNS700F12-P
TUNS700F28-P
AC85 - 264 1f
ACIN 100V 8.6typ (Io=100%)
CURRENT[A]
ACIN 200V 4.1typ (Io=100%)
FREQUENCY[Hz]
50/60 (47 - 63)
ACIN 100V 83typ
86typ
INPUT
EFFICIENCY[%]
ACIN 200V 86typ
89typ
POWER FACTOR
ACIN 100V 0.96typ
(Io=100%)
ACIN 200V 0.93typ
INRUSH CURRENT
Limited by external resistance
0.75max (ACIN 240V 60Hz, Io=100%, According to IEC60950-1)
LEAKAGE CURRENT[mA]
VOLTAGE[V]
12
28
58.4
25
CURRENT[A]
VOLTAGE ACCURACY[%]
+5, -3
+5, -3
360max
0 to +100C *1 240max
OUTPUT
RIPPLE[mVp-p] -40 to 0C *1 300max
400max
540max
0 to +30% Load *1 360max
400max
0 to +100C *1 300max
RIPPLE NOISE[mVp-p] -40 to 0C *1 400max
600max
600max
0 to +30% Load *1 450max
PROTECTION OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically
OVERVOLTAGE
PROTECTION[V]
15.00
16.80
35.00 - 39.20
CIRCUIT AND
OTHERS
REMOTE ON/OFF
Optional (External power supply is required)
TUNS700F48-P
87typ
90typ
48
14.6
+5, -3
600max
700max
900max
700max
1000max
1000max
55.20 - 64.80
TUNS-10
Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably.
Click below for more details, to buy on-line or request volume pricing:
me tuns indd TUNS-10
http://power.sager.com/cosel-tuns700-power-supply.html
(866)2015/05/19
588-1750
10:49:57
p o w e r @ s a g e r. c o m
h t t p : / / p o w e r. s a g e r. c o m
COSEL
TUNS700 SERIES
700 Watt Power Supply
TUNS700F
Measures: 4.62 x 2.42 x 0.50”
GENERAL SPECIFICATIONS
*4
INPUT-OUTPUT-RC
INPUT-FG
ISOLATION
*4
OUTPUT-RC-FG
*4
OUTPUT-RC
OPERATING TEMP.,HUMID.AND ALTITUDE
STORAGE TEMP.,HUMID.AND ALTITUDE
ENVIRONMENT
VIBRATION
IMPACT
AGENCY APPROVALS
SAFETY AND
NOISE REGULATIONS HARMONIC ATTENUATOR
CASE SIZE/WEIGHT
OTHERS
COOLING METHOD
*1
*2
*3
*4
AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20±15C)
AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20±15C)
AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (20±15C)
AC100V 1minute, Cutoff current = 100mA, DC100V 10MW min (20±15C)
-40 to +100C (On aluminum base plate), 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000 feet) max
-40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000 feet) max
10 - 55Hz, 49.0m/s2 (5G), 3minutes period, 60minutes each along X, Y and Z axis
196.1m/s2 (20G), 11ms, once each along X, Y and Z axis
UL60950-1, C-UL (CSA60950-1), EN60950-1
Complies with IEC61000-3-2 (Class A) *3
117.3X12.7X61.5mm [4.62X0.5X2.42 inches] (WXHXD) / 190g max
Conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink)
Refer to instruction manual for measuring method of electric characteristics.
Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output.
Please contact us about another class.
”RC” is applicable when remote control (optional) is added.
Base Plate (Aluminum)
12.7 ±0.5
External view
Recommending size for processing PCB
(TOP VIEW)
[0.5]
Lot No.
11- 1.5
15
15
[0.59] [0.59]
44.05
[1.73]
4- 3.5
117.3 max
10.2 10 9 3×4=12
[0.4] [0.39] [0.35] [0.47]
50.8
[2.0]
5.0
[0.2]
±0.5
Case (PBT)
[4.62]
106.7 ±0.5
[4.2]
(5.3)
2- 2 ±0.2
10 10.2
[0.47] [0.35] [0.39] [0.4]
3×4=12 9
[2.42]
61.5 max
[2.0]
50.8
±0.5
[0.39] [0.4]
10 10.2
[0.21]
2- 2.5
106.7
[4.2]
4
[0.16]
11- 1 ±0.1
15
[0.59]
15
[0.59]
44.05
[0.16]
[1.73]
Control pin for Remote
ON/OFF (Option)
[0.21]
4
Name Plate
(5.35)
Dimensions in :
4-M3
Mounting Hole
AC1
-VOUT
AC2
+VOUT
-S, -M (Option : P)
+S, +M (Option : P)
TRM, NC (Option : P)
IOG
R +BC -BC
RC2 (Option : R1/R2)
RC1 (Option : R1/R2)
Div. : 0.5inch
mm
[inch]
Tolerance : 0.3 [ 0.012]
Weight : 190g max
Dimensions in mm, [ ]=inches
Mounting hole screwing torque : 0.49N m (5.0kgf cm) max
4-FG
Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably.
Click below for more details, to buy on-line or request volume pricing:
http://power.sager.com/cosel-tuns700-power-supply.html
(866) 588-1750
p o w e r @ s a g e r. c o m
h t t p : / / p o w e r. s a g e r. c o m
TUNS