AC/DC Power Supply • Module Type • PFC • 500W
Cosel TUNS500F Series
TRC ELECTRONICS, INC.
Providing exceptional customer service since 1982
AC-DC Power Supplies Power Module type
TUNS500F
Ordering information
TUN
1
2
S
3
500
4
F
5
48
6
-O
1Series name
2Single output
3Output wattage
4Universal Input
5Output voltage
6Optional
T : with Mounting hole
(f3.4 thru)
Y1: Outputvoltage adjustment
range ±20% (Only 48V)
R1: with Remote ON/OFF
R2: with Remote ON/OFF
(Low standby power)
R
*Avoid short circuit between +BC/R and -BC. It may cause the failure of inside components.
*Keep TRM open, if output voltage adjustment is not necessary.
*If remote sensing is not necessary, connect between +Vout & +S and between -Vout & -S.
MODEL
MAX OUTPUT WATTAGE[W]
DC OUTPUT
TUNS500F12
504
12V 42A (Peak 55A)
SPECIFICATIONS
MODEL
VOLTAGE[V]
CURRENT[A]
FREQUENCY[Hz]
INPUT
TUNS
OUTPUT
ACIN 100V
ACIN 200V
ACIN 100V
ACIN 200V
ACIN 100V
POWER FACTOR (Io=100%)
ACIN 200V
INRUSH CURRENT
LEAKAGE CURRENT[mA]
VOLTAGE[V]
*3
CURRENT[A]
LINE REGULATION[mV]
LOAD REGULATION[mV]
0 to +100C*1
RIPPLE[mVp-p]
-40 to 0C *1
0 to +100C*1
RIPPLE NOISE[mVp-p]
-40 to 0C *1
0 to +65C
TEMPERATURE REGULATION[mV]
-40 to +100C
*2
DRIFT[mV]
EFFICIENCY[%]
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]
PROTECTION
CIRCUIT AND
OTHERS
ISOLATION
ENVIRONMENT
SAFETY AND
NOISE REGULATIONS
OTHERS
*1
*2
*3
*4
*5
OUTPUT VOLTAGE SETTING[V]
OVERCURRENT PROTECTION
OVERVOLTAGE PROTECTION[V]
REMOTE SENSING
REMOTE ON/OFF
*5
INPUT-OUTPUT-RC
INPUT-FG
*5
OUTPUT-RC-FG
*5
OUTPUT-RC
OPERATING TEMP.,HUMID.AND ALTITUDE
STORAGE TEMP.,HUMID.AND ALTITUDE
VIBRATION
IMPACT
AGENCY APPROVALS
HARMONIC ATTENUATOR
CASE SIZE/WEIGHT
COOLING METHOD
TUNS500F28
504
28V 18A (Peak 24A)
TUNS500F48
504
48V 10.5A (Peak 14A)
TUNS500F12
TUNS500F28
TUNS500F48
AC85 - 264 1f
6.0typ (Io=100%)
3.0typ (Io=100%)
50/60 (47 - 63)
84typ
87typ
88typ
86typ
90typ
90.5typ
0.96typ
0.93typ
Limited by external resistance
0.75max (ACIN 240V 60Hz, Io=100%, According to IEC60950-1)
12
28
48
42 (Peak 55)
18 (Peak 24)
10.5 (Peak 14)
24max
56max
96max
24max
56max
96max
120max
180max
250max
150max
200max
300max
150max
200max
300max
200max
300max
450max
120max
280max
480max
240max
560max
960max
40max
90max
180max
Fixed (TRM pin open), adjustable by external resistor or external signal
9.60 - 14.40
22.40 - 33.60
38.40 - 52.80 (-Y1 Option : 38.4 - 57.6)
11.91 - 12.29
27.56 - 28.44
47.24 - 48.76
Works over 101% of peak current and recovers automatically
15.00 - 16.80
35.00 - 39.20
55.20 - 64.80 (-Y1 Option : 60.0 - 67.2)
Provided
Optional (External power supply is required)
AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20±15C)
AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20±15C)
AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (20±15C)
AC100V 1minute, Cutoff current = 100mA, DC100V 10MW min (20±15C)
-40 to +100C (On aluminum base plate), 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000 feet) max
-40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000 feet) max
10 - 55Hz, 49.0m/s2 (5G), 3minutes period, 60minutes each along X, Y and Z axis
196.1m/s2 (20G), 11ms, once each along X, Y and Z axis
UL60950-1, C-UL (CSA60950-1), EN60950-1
Complies with IEC61000-3-2 (Class A) *4
117.3X12.7X61.5mm [4.62X0.5X2.42 inches] (WXHXD) / 190g max
Conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink)
Refer to instruction manual for measuring method of electric characteristics.
Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output.
( ) means peak current. Avoid operating with peak current continuously. It may cause failure of the components inside the product.
There are limitation of available condition of the peak current, such as peak time, duty etc. (Refer to the instruction manual in detail.)
Please contact us about another class.
”RC” is applicable when remote control (optional) is added.
TUNS-8
TRC
ELECTRONICS, INC.
1.888.612.9514 2015/05/19
www.trcelectronics.com/cosel
AC/DC Power Supply • Module Type • PFC • 500W
Cosel TUNS500F Series
TUNS500F
TRC ELECTRONICS, INC.
Providing exceptional customer service since 1982
External view
Recommending size for processing PCB
(TOP VIEW)
12.7 ±0.5
Base Plate (Aluminum)
[0.5]
Lot No.
11- 1.5
15
15
[0.59] [0.59]
44.05
[1.73]
4- 3.5
117.3 max
10.2 10 9 3×4=12
[0.4] [0.39] [0.35] [0.47]
50.8
[2.0]
5.0
[0.2]
±0.5
Case (PBT)
[4.62]
106.7 ±0.5
[4.2]
[0.47] [0.35] [0.39] [0.4]
3×4=12 9
±0.5
[2.0]
50.8
[2.42]
10 10.2
[0.39] [0.4]
10 10.2
2- 2 ±0.2
61.5 max
(5.3)
[0.21]
2- 2.5
106.7
[4.2]
4
[0.16]
15
11- 1 ±0.1
[0.59]
44.05
15
[0.59]
[1.73]
Control pin for Remote
ON/OFF (Option)
[0.16]
[0.21]
4
Name Plate
(5.35)
Dimensions in :
4-M3
Mounting Hole
AC1
-VOUT
AC2
+VOUT
-S
+S
TRM
IOG
R
+BC -BC
RC2 (Option)
RC1 (Option)
Div. : 0.5inch
mm
[inch]
Tolerance : 0.3 [ 0.012]
Weight : 190g max
Dimensions in mm, [ ]=inches
Mounting hole screwing torque : 0.49N m (5.0kgf cm) max
4-FG
TUNS
2015/05/19
TRC ELECTRONICS, INC.
1.888.612.9514 www.trcelectronics.com/cosel
TUNS-9