Reliable, high performance power supplies by ifm

advertisement
Power Supplies and Accessories
www.ifm.com/us/power-supplies
Reliable, high performance
power supplies by ifm
For industrial
applications
High performance power supplies
ifm’s power supplies are
designed to provide the
voltage supply for sensors,
actuators, controllers, and
other electronic loads. These
new power supplies are
compact and lightweight,
generating less heat and
occupying minimal space in
control cabinets.
Models operate from a wide
input voltage range with
short circuit and overload
protection, including
“no-hiccup” short circuit
operation.
ifm’s switched-mode power
supplies have a typical
regulated output voltage of
24 VDC. Between no-load
and full-load, they ensure
Regulated output voltage
of 24 V DC.
Up to 70% reduction in size, the
slim profile housing design conserves valuable control cabinet
space and can be DIN rail mounted.
With energy-saving efficiencies up
to 94.8%, ifm power supplies generate less heat and eliminate the
need for external cooling.
Designed with 20% power reserve
to ensure reliable operation.
24
cool
hot
Minimum
power loss
The heat inside the
switching cabinet
is reduced, as seen
in this comparison.
Smaller enclosures
can be used which
reduces overall
machine cost.
Accepts a wide input voltage
range with short circuit /overload
protection.
Extra power due to “power boost”
design provides up to 50% extra
power above the rated load for up
to 5 seconds.
Wide temperature
range
-25 °C
70 °C
Switched-mode
power supplies by
ifm provide the
necessary power
across the entire
temperature range.
Efficient and reliable voltage power supplies –
generate less heat and occupy minimal space in the control cabinet
Compact robust housings occupy
minimal control cabinet space
stable supply voltage and
operational reliability in
case of supply voltage
fluctuations. Line voltage
fluctuations up to ± 10% as
well as line interference can
be compensated for and not
passed on to the load.
Connections accept up to
10 AWG wire
They have a high peak
current capacity for inductive
load switching and do not
shut down or fold-back
due to the high inrush
currents required.
Operating status is provided
by bright LED
Diagnostic indication LED
ifm’s power supplies set a
new benchmark in providing
efficient and reliable voltage
supply.
DN4012
Extra power due to “power
boost” design
Reliable and efficient power
supply. 24 V power supplies
from 1.3 to 20 A.
V DC
Space savings
ifm’s compact
power supplies
occupy minimal
space in the control
cabinet which
reduces the
enclosure size
and saves cost.
20 %
100 %
20% power
in reserve
Ability to provide
up to 20% extra
current ensures
reliable and
trouble-free
operation.
Designed and tested
for reliability
Each power supply
undergoes a
comprehensive test
procedure including
high frequency and
high current load
switching.
To further insure
reliability, all power
supplies are
fully burned in
at elevated
temperatures.
Product selection guide
Output Current
Continuous
(A @ 24 VDC)
Output Voltage
(V)
Nominal Input Voltage
(V)
Efficiency
(%)
Part
No.
List
Price
45 x 90 x 100
1.25
24…28 DC
100...230 AC
84.0
DN1030
$130.00
45 x 90 x 100
2.5
24…28 DC
100...230 AC
88.0
DN1031
$140.00
40 x 124 x 122.5
3.3
24…28 DC
115...230 AC
88.0
DN4011
$150.00
40 x 124 x 122.5
5.0
24…28 DC
115...230 AC
89.4
DN4012
$199.00
62 x 124 x 122.5
10.0
24…28 DC
115...230 AC
91.0
DN4013
$259.00
65 x 124 x 132.5
20.0
24…28 DC
115...230 AC
92.7
DN4014
$300.00
62 x 124 x 132.5
10.0
24…28 DC
3 x 380…480 AC
92.9
DN4033
$299.00
65 x 124 x 132.5
20.0
24…28 DC
3 x 380…480 AC
94.8
DN4034
$399.00
Dimensions
(mm)
Power supply • 1-phase
Power supply • 3-phase
Technical Specs
Operating
temperature:
-13…158 °F (-25…70 °C)
Housing material: Polycarbonate: DN1030, DN1031
Steel: DN4011, DN4012, DN4013,
DN4014, DN4033, DN4034
Approvals:
cULus, UL508, NEC Class II: DN4011
cULus, UL508: DN1030, DN1031, DN4012,
DN4013, DN4014, DN4033, DN4034
For more information, such as
technical data, please go to
www.ifm.com/us/power-supplies
1
2
DN4014
DN4013
DN4011, DN4012
++- -
13 14
++ - -
1
2
35
124
130.5
35
124
130.8
35
124
130.5
1
2
13
14
40
114.6
122.5
127
DN4033, DN4034
13 14
L
PE
4
4
N
62
114.6
122.5
127
++ - 65
124
132.5
136.7
DN1030, DN1031
1) Potentiometer 24...28 V DC
2) LED for diagnostic indication
3) Terminals for diagnostic signal
++ - -
90
35
124
130,5
1
2
LED
4
L1 L2 L3 PE
62
3
N L PE
4
N L PE
114,6
122,5
127
45
100
ifm’s new generation power supplies –
Reliable voltage handling technology, occupies less space
in the control cabinet, great price/performance!
Technology Comparison
Features
Power
Supply
Efficiency
Low cost
Brand A
Good
performance
Brand B
ifm's
DN4012
86%
90%
90%
Inrush
Current
24 A
15 A
3A
Housing
Size
63.5 x 142 x 116 mm
40 x 130 x 125 mm
40 x 124 x 127 mm
Mean Time
Before
Failure
AC Buffer
Times
Power
Reserve
450,000 hrs.
None
None
635,000 hrs.
None
20%
869,000 hrs.
80 ms
20%
Why is this important?
Efficiency reduces cabinet space
A more efficient power supply generates less heat in a cabinet.
This allows a smaller enclosure to be designed, which reduces
machine size and saves in build costs. ifm’s new power supplies
are designed to generate less heat and can be mounted in
smaller cabinets.
Limiting inrush current reduces cost
ifm's microprocessor-controlled inrush current limiter ensures
minimum inrush current. This allows the option to use smaller
circuit breakers and thinner gauge wires, which reduces the
overall cost of the system.
Compact housing size reduces cabinet space
Cabinet space is a valuable commodity. ifm’s new slim-line power
supplies occupy less space. Therefore, smaller enclosures may be
designed resulting in considerable cost savings.
High MTBF increases reliability
Mean Time Between Failure (MTBF) values indicate the quality
and reliability of the unit. ifm power supply’s high quality
components ensure long life in application.
AC buffering increases reliability
AC lines can be affected by EMC and other factors leading to an
unstable AC input voltage and can cause a disruption on the 24
VDC side. Longer buffer times allow for brief disturbances on the
AC input line without affecting the 24 VDC output power. ifm’s
power supplies are designed with AC buffering capability.
Additional power reserve increases reliability
The ability to provide a continuous current beyond standard
specifications allows difficult loads, such as motors, to start.
ifm’s power supplies provide 20% extra current to ensure
uninterrupted operation.
You can count on our service
team to be a reliable partner.
That means easy order
placement and knowledgeable
technical support. Your time
is too valuable to waste.
ifm product lines
Inductive sensors
Cylinder sensors
Why select ifm for your sensors and controls needs?
ifm people. The ifm team of employees is committed to helping you succeed in
your business. We directly service and work with over 20,000 customers in the US.
Photoelectric sensors
Capacitive sensors
Safety sensors
Pressure sensors
Flow sensors
Temperature sensors
Level sensors
Vibration monitoring
Valve sensors
Power supplies
AS-i bus system
Safety-at-Work
Identification products
Cable assemblies
Mobile controls
ifm efector
North America
ifm efector USA
782 Springdale Dr.
Exton, PA 19341
800-441-8246
www.ifm.com/us
ifm products. For over 40 years, ifm has developed, manufactured, and
marketed sensors to industries that include assembly and robotics, automotive,
material handling, packaging, metal forming, plastics, and food and beverage.
We offer a complete family of position sensors, fluid sensors, diagnostic systems,
networking products, and wiring solutions.
Quality. There can be no compromise in the quality and reliability of sensors that
are applied in your production facility. The ifm new product development process
incorporates specific testing for sensors and controls to withstand environments
with shock and vibration, electrical noise and temperature fluctuations.
Investment in R&D. Developing new products that increase uptime and
productivity is a core belief of our company. We apply practical innovation to
simplify technology and develop products that can have a positive impact on your
production process.
Application know-how. ifm has over 40 years of experience in working with
industrial automation applications. Our knowledgeable team of technical support
engineers will work with you to recommend the right solution, the first time.
ifm business philosophy. ifm provides a knowledgeable and courteous service
center team to assist with order placement and technical support. We offer an
efficient distribution center for accurate and on-time delivery of products. ifm
publishes list prices in literature and on our website, and we always stand behind
the quality and performance of our products.
Global presence with local focus. With more than 4,800 dedicated ifm
employees in over 70 countries, you can count on local support all over the world.
ifm efector Canada
2233 Argentia Road, Suite 104
Mississauga, ON L5N 2X7
855-436-2262
www.ifm.com/ca
ifm efector México
Ave. Arq. Pedro Ramírez Vázquez
200-4, Planta Baja Col. Valle Oriente
San Pedro Garza García, N.L. 66269
01-800-813-4363
www.ifm.com/mx
ifm efector – close to you!
Lit. No.: U20314
Vision sensors
Download