DT900 Series
Heavy Duty DUAL TEC Motion Sensor
with Anti-Mask and extended range
The use of two technologies—microwave and PIR—and features like anti-masking,
vandal—resistant housing, large coverage patterns and three microcontroller-based
sensitivity modes, make the powerful DT900 sensors, ideal for the harshest commercial
and industrial environments.
Features
l
Microcontroller-Based Dual
and industrial applications such as
damage, two end-of-line terminals and
Technology
warehouses, large retail facilities,
easy vertical and horizontal adjustment
Microwave and passive infrared
manufacturing sites and schools.
including fine tuning.
(PIR) technologies, combined with
l
l
Mirror Optics For Long Range
The DT900 series utilizes custom
processing, provide excellent detection
and PIR thresholds to compensate for
designed mirror optics to provide
while virtually eliminating false alarms
environmental disturbances not related
effective capture at long range. Each
and costly service calls.
to actual intrusion events (repetitive
model is easily selectable between two
Anti-Mask
motion like e.g. ceiling fan).
ranges.
l
Digital Fluorescent Light Filter
l
Zero Clearance Bug Guard
for anti-masking to detect attempts to
Digital filter virtually eliminates
The bug guard provides zero clearance,
mask the sensor. Detection of a mask
interference caused by fluorescent
protecting the
is indicated by flashing LED’s and
lighting.
pyro chamber from insects that can
Three Microcontroller-based
cause false alarms.
activating the relay based mask output.
l
Self-Test and Continuous
Sensitivity Modes
Supervision for High Reliability
Sensor sensitivity can be set to high for
The LEDs will display codes to indicate
This industrial-grade sensor performs
fastest capture, to normal, or to low for
an anti-masking condition, INFORMER
multiple levels of supervision. The
maximum false alarm immunity in harsh
condition, trouble condition, and
INFORMER function checks each
environments.
recallable codes to indicate INFORMER
Sensitivity
results and whether or not there was a
Two to four steps within field-of-view,
self-test failure.
technology continuously. The
microcontroller conducts a self-test
l
of the sensor’s functions at regular
depending on sensitivity setting selected.
intervals, and reports any trouble using
the on-board trouble relay.
l
Self-Adjusting Thresholds
Automatically adjusts the microwave
The DT900 Series uses Active Infrared
l
l
microcontroller-based advanced signal
Designed for Harsh Environments
Vandal resistant housing combined
with a zero clearance bug guard make
the DT900 series ideal for commercial
l
l
l
LED Diagnostics
Remote inputs
Installer-Friendly Design
In addition to anti-masking, the DT900
Designed with the installer in mind, the
Series has command input for initiating
DT900 series contains a large wiring
a self-test remotely and a remote LED
space, protective clear plastic covers
enable input.
over the circuit boards to prevent
DT900 series
Heavy Duty DUAL TEC Motion Sensor
with Anti-Mask and extended range
Detection patterns:
Specifications
Dimensions
20 cm x 17 cm x 15 cm
Weight
1,36kg
Power Requirement
10–15V dc; 50 mA (max) at 12V dc
DT900
Top view
AC ripple: 3 V peak-to-peak at nominal 12V dc
Alarm Relay
Energized (N.O./N.C.); 25V dc
125 mA 22 ohm series protection resistor
Tamper
Wall, bottom and top cover
30V dc, 25 mA (N.C.)
Anti-mask and Trouble
Normally Closed relays, 30V dc, 25 mA
Relays
Operating Temperature
0º to 49ºC; 5% to 95% relative humidity, non-condensing
RFI / ESD Immunity
RFI : 30 V/m, 10 MHz to 1000 MHz
ESD : +10 kV
PIR White Light Immunity
6500 LUX
Optimal Mounting Height
2m minimum to 3.7m maximum
Range
Side view
Ordering:
DT900-NL
Heavy Duty DUAL TEC Motion Sensor
with Anti-Mask. Range 27m x 21m
and 15m x 12m. Microwave frequency:
DT906
10.565 GHz.
Top view
DT900-FR
Heavy Duty DUAL TEC Motion Sensor
with Anti-Mask. Range 27 m x 21 m and
15 m x 12 m.
Side view
Microwave frequency: 9.9 GHz.
3m
DT906-NL
Heavy Duty DUAL TEC Motion Sensor
with Anti-Mask. Range 37 m x 3 m
61 m x 5 m.
Microwave frequency : 10.565 Ghz
DT906-FR
Heavy Duty DUAL TEC Motion Sensor
with Anti-Mask. Range 61 m x 5 m and
37 m x 3 m.
Microwave frequency: 9.9 GHz.
Honeywell Security & Custom Electronics
Netwerk 121
1446 WV Purmerend
The Netherlands
Tel : +31 (0) 299-410200
Fax : +31 (0) 299-410201
www.honeywell.com/security/nl
HSCE-DT900-01-ENX(0107)DS-C
January 2007
© 2007 Honeywell International Inc.