truck
and Construction Equipment
Range
August 2014
www.facebook.com/motul
www.youtube.com/motul
www.motul.com
DIESEL ENGINE LUBRICANTS
®
100% SYNTHETIC TechnoSynthese
FULL SAPS
FULL SAPS
Fuel Economy
Tekma Optima 5W30
Tekma Mega X 10W40
Tekma Mega X 15W40
«Super High Performance Diesel»
For all European, American or Japanese low
emission Diesel engines naturally aspirated
or turbocharged, in line with Euro II, Euro III,
Euro IV fitted with EGR and SCR systems.
Lubricant reinforced with a synthetic base stock
providing both outstanding resistance at high
temperature, easier flowing at cold temperature
and longer lubricant life.
Improves wear protection at cranking and fuel
economy at frequent start ups.
«Super High Performance Diesel»
Reinforced lubricant intended for use in engines
running in warm climates and severe conditions.
For all European, American or Japanese low
emission Diesel engines naturally aspirated or
turbocharged, in line with Euro II, Euro III, Euro
IV fitted with EGR and SCR systems.
Lubricant reinforced with a synthetic base
stock providing outstanding resistance at high
temperatures and longer lubricant life time.
Suitable for the latest generation of
low emission turbocharged Diesel
engines (Euro II, Euro III, Euro IV),
fitted with EGR and SCR.
Specially recommended for recent
fleets with high technology engines
and with Long Drain Intervals. Fuel Economy.
Standards: ACEA E4 / E7 (E5 / E3)
Specifications: refert to chart
Tekma Ultima 10W40
Suitable for the latest generation of low emission
turbocharged Diesel engines (Euro II, Euro III,
Euro IV), fitted with EGR and SCR and high
power.
Standards: API CF, ACEA E4 / E7 (E5 / E3)
Specifications: refert to chart
LOW SAPS
Low SAPS
Tekma Ultima+ 5W30
Tekma Ultima+ 10W40
Low SAPS lubricants. For turbocharged or direct
injection Diesel engines meeting Euro II, Euro III,
Euro IV or Euro V emission regulations, fitted with
EGR and/or SCR systems and with or without
DPF, working in high severe conditions of load
and service.
Standards for Tekma Ultima+ 5W30:
API CJ-4, ACEA E4 / E6 / E7 (E5 / E3) / E9
Standards for Tekma Ultima+ 10W40:
API CI-4 / CH-4, ACEA E4 / E6 / E7 (E5 / E3)
JASO DH-2
Specifications: refert to chart
Standards: API CI-4 / CH-4,
ACEA E7 (E5 / E3)
Specifications: refert to chart
Standards: API CI-4 / CH-4, ACEA E7 (E5 / E3)
Specifications: refert to chart
Tekma Mega X LD 15W40
«Super High Performance Diesel»
Reinforced lubricant (TBN 15) intended for use in engines running with high sulfur content fuels (up to
1,5%) in warm climates and severe conditions.
For all European, American or Japanese low emission Diesel engines naturally aspirated or turbocharged, in line
with Euro II, Euro III, Euro IV fitted with EGR and SCR systems. Lubricant reinforced with a synthetic base stock
providing outstanding resistance at high temperatures and longer lubricant life time.
Standards: API CI-4 / CH-4, ACEA E7 (E5 / E3)
Specifications: refert to chart
LOW SAPS
Tekma Mega X LA 10W40
Low SAPS lubricant.
For turbo Diesel engines with DPF. Designed for
last generation of engines. Euro II, Euro III, Euro
IV or Euro V emission regulations compliant,
fitted with EGR and/or SCR Systems with or
without DPF
Standards: API CI-4, ACEA E6 / E7 (E5 / E3)
Specifications: refert to chart
Tekma Futura+ 10W30
Tekma Futura+ 10W40
Low SAPS lubricants.
For turbocharged or direct injection Diesel
engines meeting Euro II, Euro III, Euro IV or Euro
V emission regulations, fitted with EGR and/or
SCR systems and with or without DPF, working
in high severe conditions of load and service.
Standards: API CJ-4, ACEA E9 / E7 (E5 / E3)
Specifications: refert to chart
Mineral
Tekma Mega 15W40
For all European, American or Japanese low
emission Diesel engines naturally aspirated or
turbocharged, in line with Euro II, Euro III, Euro
IV fitted with EGR and SCR systems.
Standards: API CI-4 / CH-4, ACEA E7 (E5 / E3)
Specifications: refert to chart
Tekma Supra 15W40
For low emission naturally aspirated or turbocharged
Diesel engines (Euro II, Euro III).
Standards: API CG-4, ACEA E2
Specifications: refert to chart
Tekma Norma + 15W40
Tekma Norma + 20W50
Tekma Norma 10W
Standards for 15W40: API CF-4 / CF / CD / SF
Standards for 20W50: API CF-4 / CF / CE / CD / SF
Specifications: refert to chart
Standards: API CF / SF
Tekma Norma+ Monograde
SAE 30 / 40
Specially formulated for DETROIT 2 STROKE
DIESEL engines which require API CF-2 or
CD-2.
For naturally aspirated or turbocharged Diesel
engines (Euro I, Euro II).
For naturally aspirated or turbocharged Diesel engines.
Standards: API CF-4 / CF / CE / CD / SF
Specifications: refert to chart
For hydraulic systems, hydrostatic
transmissions and torque convertors.
Zinc content above 900 ppm.
Tekma Diesel 2T (SAE 40)
Standards: API CF-2 / CF
Specifications: MIL-L-2104 D
TRANSMISSION LUBRICANTS
MECHANICAL / SEMI-AUTOMATIC TRANSMISSIONS
100% SYNTHETIC
Mineral
Gear MB 80W
Gear Synt TDL 75W90
Specially designed for mechanical transmissions and long drain service.
Standards / Approvals:
API GL-5 / MT-1, MIL-L-2105E, MAN M3343 Typ S (3343 SL),
MB 235.8, ZF TE-ML 02B / 05B / 07A / 08A / 12B / 16F / 17B / 19C / 21B,
SCANIA ST0 1:0 (Transmission)
TechnoSynthese
®
Motylgear LD 75W80
Specially recommended for heavy loaded gearboxes and long drain service.
Standards / Approvals:
API GL-4, MAN 341 TL, ZF TE-ML 02D, VOLVO 97305 / 97307,
EATON (Extended drain), RENAULT VI
Motylgear 80W140
For all mechanical transmissions, synchronised or non
synchronised gearboxes, gearboxes/differential, transfer
gearboxes and hypoid differentials without limited slip system
operating under very heavy loads.
Standards / Approvals: API GL-4 / GL-5, MIL-L-2105D
AUTOMATIC TRANSMISSIONS / CONVERTERS
Multi ATF
Technosynthese® lubricant high performance.
Standards / Approvals:
GENERAL MOTOR DEXRON III G / III H / II D / II E,
FORD MERCON / MERCON V & SP, JASO 1A, ATF +3 / +4,
DIAMOND ATF J2 / SP II / SP III / PSF 3, VOITH G607,
ZF TE-ML 03D / 04D / 09 / 14A / 14B / 16L / 17C, RED-1, JWS 3309
Dexron III
For all systems where DEXRON or MERCON standard is required.
Standards / Approvals:
MAN 339 Typ Z-1 & V-1 (339F), ALLISON C4,
MB-Approval 236.5 / 236.9, VOITH 55.6335.32 (G607),
ZF TE-ML 03D / 04D / 14A / 17C, CATERPILLAR TO-2
GENERAL MOTOR DEXRON III G, FORD MERCON
Dexron IID
For all systems where DEXRON II standard is required.
Standards / Approvals: MAN 339 Typ Z-1 et 339 Typ V-1 (339D),
MB-Approval 236.7, VOITH 55.6335.32 (G607), ZF TE-ML 03D / 04D
/ 11A / 14A / 17C, GENERAL MOTOR DEXRON II D, ALLISON C4,
CATERPILLAR TO-2
Transmission Fluid A
For all systems where GENERAL MOTORS ATF type A standard is required.
Standards / Approvals:
GENERAL MOTORS ATF Type A, ALLISON C4
Specially designed for truck gearboxes: Mercedes Benz, MAN
or ZF (Ecolite, Ecomid, Ecosplit, Astronic 1&2 without Intrader).
Standards / Approvals: API GL-4, MB-Approval 235.1,
MAN 341 Typ Z1 et Typ E1 (341N), ZF TE-ML 02A / 17A
Trans MB 85W90
For gearboxes, differentials and reduction gear.
Standards / Approvals: API GL-5, MB-Approval 235.0, MAN 342 Typ
M-1, ZF TE-ML 16A/16B/16C / 17A/17B/ 19A/19B /21A
HD 80W90
For all mechanical transmissions, synchronised or non
synchronised gearboxes, gearbox/differential, transfer gearboxes
and hypoid differentials without limited slip system operating
under very heavy loads.
Standards / Approvals: API GL-4 / GL-5, MIL-L-2105D
HD 85W140
For all mechanical transmissions, reduction gears and hypoid differentials
without limited slip system operating under very heavy loads.
Standards / Approvals: API GL-4 / GL-5, MIL-L-2105D, VOLVO 97310,
ZF TE-ML 05A / 07A / 08A / 12A / 16C / 16D / 17B
EPL 90
All gearboxes, gearbox/differential and hypoid differentials without limited slip
system operating under moderate loads and revolution speed.
Standards / Approvals:
API GL-4, MIL-L 2105, MAN 341 Typ N, ZF TE-ML 16A / 17A
MTO-4 10W - 30 & 50
Specially designed to meet CATERPILLAR TO-4 specification.
Transmission lubricant CATERPILLAR : CAT TO-4 & TDTO.
API GL-1 / GL-2 /GL-3
90 PA
Specially formulated for limited-slip differentials.
Standards / Approvals: API GL-4 / GL-5, MIL-L-2105D
TRANSMISSIONS
WITH WET BRAKES
TRH 97
Specially formulated for farming machines transmissions, gearboxes, rear
axle, hydraulic liter systems and wet brakes.
Standards / Approvals:
JOHN DEERE J20C J20D, NEW HOLLAND FNHA-2-C-201.00,
JI CASE MS 1210 / MS 1209 / MS 1207 / MS 1206 / MS 1205 / MS 1204 / IH B6,
FORD M2C 86 B/C / M2C 134 D / M2C41-B / M2C48-B / M2C53-A,
MASSEY FERGUSON MF 1110 / MF 1127 / MF 1129 A / MF 1135 / MF 1141 /
MF 1143, ALLISON C4, CATERPILLAR TO-2 ,
WHITE FARM Q-1826 / Q-1802 / Q-1766 / Q-1705
TRH 100
Specially formulated for farming machines transmissions, gearboxes, rear axle,
hydraulic liter systems and wet brakes which are working in extreme conditions.
Standards / Approvals:
FORD M2C 86 A, MASSEY FERGUSON MF 1135
HYDRAULIC LUBRICANTS
Rubric HV 22 / 32 / 68
Rubric Bio 46
Rubric Bio 46 S
Biodegradable hydraulic oil, fully
synthetic, with antioxidation, anti-wear and
anti-corrosion properties used under severe
conditions.
ISO VG 46.
Biodegradability over 90% according to CEC
L33 A93 and 89% on ISO 9439.
100% synthetic and biodegradable
hydraulic oil, based on high performance
saturated Ester. Speciallly designed for hydraulic
systems working under severe conditions.
Standards / Approvals:
European Eco-label DE/027/027, Blue Angel
N°18724, Bosch Rexroth RE 90221-01
GREASES
MULTIPURPOSE
Tech Grease 300
Very high performance multipurpose grease.
Technosynthese® formulation based on complex lithium soap, with extreme-pressure, antiwear, anti-oxidation and anti-corrosion additivation. Consistency NLGI 2
Top Grease 200
Multipurpose grease lithium soap-based with
reinforced anti-wear additivation.
For the greasing of parts that are subjected to
loads. Very good adhesive properties.
Extreme pressure additive. Consistency NLGI 2
Multigrease 150
Multipurpose lithium soap-based grease for the
greasing of all parts.
Extreme pressure additive. Consistency NLGI 2
Grease 100
Multipurpose lithium soap-based grease
for greasing under normal duty conditions.
Consistency NLGI 2
Standards / Approvals:
ISO 15380 HEES
European Eco-label UK/27/006,
Bosch Rexroth RE 90221-01
For hydraulic systems working under severe
conditions.
Standards / Approvals: NFE 48 603 HV, ISO 11158
catégorie HV, ISO 6743-4 catégorie HV, DIN 51524 HVLP
Rubric HV 46 Ambient
Anti-wear hydraulic oil. Very high viscosity index.
ISO VG 46.
Standards / Approvals: NFE 48 602 HV / NFE 48 603
HV, DIN 51524 HVLP, DENISON HF-0, CINCINNATI
MILACRON P 70, CASE POCLAIN P 110 32-03J,
VICKERS V 104 C / 35 VQ 25, ISO III58 Catégorie HV
Rubric HM 32 / 46 / 68 / 100
All types of hydraulic systems. 4 viscosity grades:
ISO VG 32 / VG 46 / VG 68 / VG 100
Standards / Approvals: NFE 48 603HM, DIN 51 524 HLP,
DENISON HF-0, CINCINNATI MILACRON P 70, VICKERS V
104 C / 35 VQ 25
WATER RESISTANCE AND
ADHESIVENESS
TP Agri
Lithium soap-based grease specially designed for
public works and agricultural applications. Highly
adhesive multi-purpose product for greasing
of parts used in heavy duty conditions and/or
working in wet environment.
Extreme pressure additive. Consistency NLGI 2
SEVERE CONDITIONS
Molybden
Multipurpose lithium soap- and molybdenumbased grease for intensive use in construction
applications.
Extreme pressure additive MoS2.
Consistency NLGI 2
WHEEL BEARINGS
CENTRAL LUBRICATION
Soft grease 0
Soft lithium soap-based grease for gearbox
casings.
Extreme pressure additive.
Consistency NLGI 0
GC grease 00
Fluid lithium soap-based grease specially formulated
for central lubrication. Extreme pressure additive.
Consistency NLGI 00 / 000
Sellette
Grease Sellette
Lithium soap-based grease specially formulated
to lubricate semi-trailer fifth wheels.
Enhanced antiseizing properties (graphite).
Consistency NLGI 2
Roulement PL
Thick lithium soap-based grease specially
recommended for greasing of truck wheel
bearing. Consistency NLGI 3
➜ The colours references are corresponding to the products’ colours
MULTIFUNCTIONAL LUBRICANTS
MULTIFUNCTIONAL LUBRICANTS
TP Super Synt 10W40
DS Universal Multigrade 10W30 / 20W40
Multipurpose lubricant reinforced with a synthetic base stock Technosynthese®.
Meets the latest requirements of construction equipment manufacturers.
Suitable for diesel engines, turbocharged or not, gasoline engines, mechanical
transmissions, hydraulic systems, wet brakes, clutches and compressors.
Standards / Approvals: API CC / SE / GL-4
Performances: Refer to summary chart
Standards / Approvals: API CF-4 / CH-4 / SF, ACEA E5
Performances: Refer to summary chart
Specially formulated for non turbocharged Gasoline and Diesel engines.
Transmissions without wet brakes and hydraulic lifter systems.
COMPRESSOR LUBRICANTS
Multisynthese Universal 15W40
Vis 32 / 46
Multipurpose lubricant reinforced with a synthetic base stock Technosynthese®.
Meets the latest requirements of construction equipment manufacturers.
Suitable for diesel engines, turbocharged or not, gasoline engines, mechanical
transmissions, hydraulic systems, wet brakes, clutches and compressors.
Performances: Refer to summary chart
Alterna 100 / 150
Rotary air compressor lubricant, wear protection, anti-foam.
ISO VG 32 / 46
Reciprocating air compressor or vacuum pumps lubricant, wear protection,
antifoam.
ISO VG 100 / 150
DIESEL ENGINE LUBRICANTS
MANUFACTURERs’ APPROVALS & SPECIFICATIONS
MBApproval
MTU
RVI
MB-Approval
228.5
Type III
RXD
M3277
MB-Approval
228.5
Type III
RLD-2
EO-O
PREMIUM PLUS
M3477
M3271-1
M3575
MB-Approval
228.51
Type 3.1
RLD-3
EO-N
M3477
M3271-1
MB-Approval
228.51 & 235.27
Type 3.1
RLD-2
Low Ash
VDS-3
EO-N
M3275
MB-Approval
228.3
Type II
RLD-2
LDF-2
VDS-3
CUMMINS
DAF
DEUTZ
IVECO
MACK
MAN
Tekma Optima
5W30
CES 2007172-76-77
HP-1
HP-2
DQC-IV
18-1804
FE
EO-M PLUS
M3277
Tekma Ultima
10W40
CES 20072
DQC-III
EO-N
CES 20081
DQC-IV LA
DQC-IV LA
CAT
SCANIA
VOLVO
VDS-3
LDF-3
VDS-3
Tekma Ultima +
5W30
ECF-3
Tekma Ultima +
10W40
ECF-1a
Tekma Mega X
10W40
ECF-1
Tekma Mega X
15W40
ECF-1
CES 2007172-76-77-78
EO-M PLUS
EO-N
M3275
MB-Approval
228.3
Type II
RLD-2
VDS-3
Tekma Mega X LD
15W40
ECF-1
CES 2007172-76-77-78
EO-M PLUS
M3275
MB-228.3
Type II
RD
RD-2
RLD
RLD-2
VDS-3
DQC-III LA
EO-N
M3477
M3471-1
MB-Approval
228.51
Type 3.1
RLD-2
RXD
RGD
VDS-3
CES 20081
DQC-III-10
EO-O
PREMIUM PLUS
M3575
MB-228.31
RLD-3
VDS-4
CES 20081
DQC-III LA
EO-M PLUS
EO-O
PREMIUM PLUS
M3575
MB-228.31
RLD-3
VDS-4
EO-N
M3275
MB-Approval
228.3
Type II
RLD-2
VDS-3
EO-L
M271
MB-Approval
228.3
Type I
E2R
VDS
Tekma Mega X LA
10W40
Tekma Futura +
10W30
CES 2007677
ECF-2
ECF-3
ECF-1a
Tekma Futura +
10W40
Tekma Mega
15W40
Long
Drain
ECF-1
Long
Drain
CES 2007172-76-77-78
Tekma Supra
15W40
Tekma Norma+
15W40 & 20W50
MB-Approval
228.1
Tekma Norma+
Monograde
30 / 40
MB-Approval
228.0
VDS-4
MULTIFUNCTIONAL LUBRICANTS
MANUFACTURERs’ PERFORMANCES
CAT
MIL-L
GM
ZF-TE-ML
NEW HOLLAND
FORD
MASSEY
FERGUSON
MB
JOHN DEERE
TP Super Synt
10W40
TO2
Allison C4
06B / 06C / 07B
M2C 159 B
30 / 40
MF 1139 & 1144
227.1
JDM 27
Multisynthese
Universal 15W40
TO2
Allison C4
06B / 06C / 07B
M2C 159 B
30 / 40
MF 1139 & 1144
227.1
JDM 27
DS Universal
Multigrade
10W30 / 20W40
MIL-L2104 B & 2105
The lubricant recommendations for each vehicule are available on the website www.motul.com
Maintenance
BRAKE FLUIDS
Dot 3 & 4 Brake Fluid
Dot 5.1 Brake Fluid
Long-life 100% synthetic fluid for all types of hydraulic brakes
and clutches.
Dry boiling point: 272 °C (522 °F)
Wet boiling point: 185 °C (365 °F)
100% synthetic fluid for all types of hydraulic brakes
and clutches.
Dry boiling point: 245 °C (473°F)
Wet boiling point: 158 °C (316 °F)
Standards: FMVSS 116 DOT 3, DOT 4, DOT 5.1, SAE J 1703,
SAE J 1704, ISO 4925 (5.1, 3&4)
Standards: FMVSS 116 DOT 3, DOT 4, SAE J 1703,
SAE J 1704, ISO 4925 (3&4)
COOLANTS
Inugel Optimal Ultra
Concentrated formula
Long-life organic technology.
High protection down to -54°C / -65°F.
Dilution from 33% to 60%.
Ready to use
Long-life organic technology.
High protection down to -37°C / -35°F.
Performances:
BS 6580, MAN 324 Typ SNF, Renault Trucks
41.01-001 / --Type D, DAF 74002
Inugel Expert
Performances:
BS 6580, MAN 324 Typ SNF, Renault Trucks
41.01-001 / --Type D, DAF 74002
Inugel Expert Ultra
Ready to use. Hybrid technology.
Anti-corrosion and anti-freeze.
This product can be mixed with almost
all monoethyleneglycol based coolants.
Protection down to -37°c / -35 °F.
Performances: BS 6580, AFNOR NFR
15-601, JASO M325, SAE J1034,
MAN 324 Typ NF, Volvo Trucks 128
6083/002, IVECO 18-1830
Concentrated formula.
Hybrid technology.
Anti-corrosion and anti-freeze.
This product can be mixed with almost
all monoethyleneglycol based coolants.
Protection down to -54°c / -65°F.
Dilution from 33% to 60%.
Inugel Classic
Ready to use
Anti-corrosion
and anti-freeze.
Protection down to
-25°C / -13°F.
Performances: BS 6580, AFNOR NFR
15-601, JASO M325, SAE J1034,
MAN 324 Typ NF, Volvo Trucks 128
6083/002, IVECO 18-1830
CLEAN AND SHINE
Diesel System Clean
Vision Expert Ultra
E.Z. Lube Multi Protect
Superior engine output.
Cleaner specially designed for the fuel
systems of Diesel engines.
Reinforced action on valves, carburettors,
injectors and combustion chambers. 300ml
Concentrated windshield washer
Adapt dilution to required protection.
Exclusive formula degreases and
removes dirt from the windshield.
Multi protection
Multi-use lubricant and anti-corrosion
fluid.
Creates a reinforced anti-corrosion
protective film.
Engine System Clean
Vision Classic -20°C
Add to the oil before drain.
Cleans and protects the engine.
Decreases oil and fuel consumption.
Improves compression. 300ml
MOTUL
119 Bd Félix Faure - 93300 Aubervilliers France
Tel +33 (0) 1 48 11 70 00 - Fax. +33 (0) 1 48 33 28 79
Contact : info@motul.com
www.motul.com
Ready to use windshield washer.
Degreases and removes dirt from the
windshield. Dries without leaving any mark.
Freezing protection for washer system and
tank protection (-20°c / -4°F).
mb2 project - 202571- © Stéphane ADAM - August 2014
Inugel Optimal